Veeder Root 7999 Mite Elapsed Timers Catalog Page
CERTIFIED
RECOGNIZED
®
®
VEEDER-ROOT brand
Electronic Time Indicators/Controllers
7999 Mite Elapsed Timers
7999 Mite Elapsed Timers
The MITE Series 7999 time indicators offer unmatched ease-of-use,
simplicity, performance and value. Two models provide four timing
ranges to cover applications such as coating/rinsing, baking and engine
usage.
■ Timers include models for second or minutes and seconds; or hours
and minutes or hours and hundreths
■ Compact, solid state design
■ Front panel and remote reset
■ NEMA-4/IP65 environmental sealing
■ Easy-to-read, high contrast Liquid Crystal Display (LCD)
■ UL recognized, CSA Certified
■ Supplied with prewired plug-in connector
■ Fast, easy mounting - minimal 1.2" (30mm) depth behind panel
■ Very low priced - without sacrifice of performance or reliability
SPECIFICATIONS
Accuracy: Timer: ±20 ppm @ 20°C
Inputs: Contact closure or open collector
Display: 7 digit, 7mm LCD
Reset: Front panel (selectable), remote by contact closure or NPN
transistor.
A family of low cost,
high performance
LCD indicators and
accessories
E135458
Specific Models
Power Requirements: None; permanent internal lithium battery with
10-year typical life
Operating Temperature: +14° to +144 °F (–10° to +60°C)
Storage Temperature: +4° to +144 °F (–20° to +60°C)
Model No. Description
079998D-510 LCD Time Indicator, Sec or Min-Sec, Din Size
079998D-610 LCD Time Indicator, Hr-Min or Hrs–
ACCESSORIES
AC/DC Input Module: Allows use of high voltage input signal of
5 to 240 VAC/DC. Connections are via screw terminations.
Part Number 108940-0001
Screw Terminal Adaptor: Provides the convenience of screw terminal
connection of input signal and remote reset. Part Number 108937-0001
1
/
ths, Din Size
100
5
T
E
L
O
T
E
T
I
C
A
M
T
L
E
R
R
I
O
S
N
Z
I
I
C
N
G
For 12mm Display, see Series A103
For Electrical Hour Meters, see Series 7795
Typical Applications:
1–Total Machine Hours
2–Tools Usage Time
7999 Timers
Dimensions:
Behind panel depth: 30.5mm
48mm
44.9mm
24mm
DIN Size Models
REAR
Panel Cutout: 45mm x 22mm (+0.5, -0)
With adaptor installed: 47mm
Adaptor
21.9mm
VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR
SIDE
4mm
Mounting Clip
5.55
Loading...