Veeder Root 7441 Electric Preset Catalog Page
VEEDER-ROOT brand
CERTIFIED
RECOGNIZED
®
®
Mechanical & Electric Counters
When panel area is limited, and functional simplicity is a key concern,
the Series 7441 may be the best predetermining counter for the job. It
counts down from a user entered preset value. Upon reaching zero, an
output switch is actuated. Manual or remote reset restores the switch
and preset value to their original condition.
■ Reliable operation at counting speeds to 1500/minute
■ Underwriters Laboratories Recognized
■ 5 figure count display and preset capability
■ Models for AC and DC operation
■ Compact size – 2" wide (50.8mm), 1" high (25.4mm)
■ Rugged, high impact plastic and stainless steel case
■ Unique preset interlock prevents accidental change
■ Form C (SPDT) output contacts rated at 1 amp.
■ Models available with electric remote-reset
■ Convenient plug-in connector
Setting a preset value into the Series 7441 is direct and easy, yet
secured from unintentional change. Just press the reset button to its
special latched position, then use the five digit-buttons to set the desired
number on the display. If left latched, the reset button will automatically
return to its normal position when the first count signal is received.
7441 Electric Preset
Convenient pushbutton
preset entry . . . in a
space-saving package
Specific Models
Power Consumption: 6 watts count coil, 12 watts reset coil
Output Actuation: The internal SPDT switch actuates on the power-off half
of the predetermining count cycle; the switch will remain in its position,
and the count will stay at zero until the counter is reset
Number of Figures: 5 [0.160 in. high x 0.075 in. wide (4.1 x 1.9mm)]
Reset: Manual pushbutton or electric reset, see models
Preset: Manual pushbutton for each digit; reset button must be fully
depressed and latched to permit setting
Connections: Plug-in connectors
Net Weight: 5 oz. (142g)
Electric
Count Reset
Supply Coil Coil Electric
Model No. Voltage Resistance Resistance Reset
0744195-211 115 VAC 1500Ω — NO
0744195-221 115 VAC 1500Ω 716Ω YES
0744195-226 24 VDC 100Ω 77Ω YES
3
M
T
E
O
C
C
T
O
H
A
U
&
N
L
E
T
L
I
E
E
Z
R
C
I
S
T
N
R
G
I
C
For two presets, see Series C346
For low cost electronic, see Series A103
SPECIFICATIONS
Count Speed: 1500 cpm on DC, 1200 cpm on AC
Operating Temperature Range: +32° F to +120° F (0 to +49° C)
Maximum on Time: With a 50% duty cycle, maximum permissible ON time
is 5 minutes
Count Pulse Timing: 20 milliseconds minimum on- or off-time for DC
operation, 25 milliseconds minimum on-time for AC operation
Electric Reset Timing: 250 milliseconds minimum; 30 seconds maximum;
allow 500 milliseconds after removal of reset pulse before applying count
pulse
Supply Voltage: Standard voltages are 115 VAC, 50/60 Hz; 24 VDC;
allowable voltage variation is ±10% or 10 volts, whichever is less
Typical Applications:
Printing Press
Ideal for printing presses, molding machines, and other industrial
equipment.
Molding Machine
Dimensions:
2.395"
60.8mm
1.885"
47.8mm
0.125"
3.2mm
4.211"
107mm
123 4 5
PANEL MOUNT
2 holes for #4 screws
SUGGESTED
PANEL CUTOUT
27.8mm
2.187"
55.6mm
VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR
1.187"
30.1mm
0.156"
4.0mm
1.50"
38.1mm
3.25
Loading...