Page 1
STORMTRACKER
™
TV/LANTERN/AM/FM/EMERGENCY/WEATHER RADIO
VEC135
USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
www.vectormfg.com
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
ONE YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty , other than those
described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for one year from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for any
amount of damage in excess of the retail purchase price of the product under any circumstances. Incidental
and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to
units from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power
sources.
RETURN/REPAIR POLICY : Defective products, other than accessories, may be returned to manufacturer. Any
defective product, other than accessories, that is returned to manufacturer within 30 days of the date of
purchase will be replaced free of charge. If such a product is returned more than 30 days but less than one
year from the purchase date, manufacturer will repair the unit or, at its option, replace it free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option. A
unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or
replaced unit will then be warranted under the terms of the remainder of the warranty period. The customer
is responsible for the shipping charges on all returned items after 30 days. During the warranty period,
manufacturer will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from
normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or
exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized
use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and
Acts of God.
If your problem is not covered by this warranty, call Technical Support at (866) 584-5504 for general
repair information and charges, if applicable. You may also contact us through our website at
www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on
how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,
so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal
rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax or
mail (see below). We suggest that you keep the original packaging in case you need to ship the unit. When
returning a product, include your name, address, phone number, dated sales receipt (or copy) and a
description of the reason for return and product serial number. After repairing or replacing the unit, we will
make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.
Enter “VEC135” as Model and “Stormtracker
™
” as Product Type. All Vector products must be registered
within 30 days of purchase to activate this warranty. Mail the completed registration form, along with a
copy of the original sales receipt to:
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (866) 584-5504 • FAX: (954) 584-5556 •
WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.
BD030205
© 2005 VECTOR MANUFACTURING
MADE IN CHINA
VEC135_Manual_051705 5/18/05 2:57 PM Page 12
Page 2
iiiii
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS
1. To reduce the risk of fire or electrical shock, do not expose this unit to rain or
moisture.
2. Never attempt to recharge disposable dry cell “C” size batteries. This could be
dangerous.
3. Do not open this unit except to replace dry cell batteries. There is no other
replaceable part.
4. Keep unit out of reach of children (whether stored or in use).
CAUTIONS
1. Use only the supplied cords/adapters for recharging this unit.
2. Make sure all switches are in the OFF position before connection to a power source
or load.
3. Never insert anything other than the supplied AC adapter and DC power adapter
into the 12 volt DC charging/power socket on this unit. Do not use any accessory
not recommended or provided by the manufacturer.
4. When using the AC adapter or DC adapter, do not use near water, such as a
bathtub, sink or laundry, in a wet basement or next to a swimming pool.
5. All slots and openings in this unit are required for ventilation and temperature
control and should not be blocked or covered in any way.
6. Never push objects of any kind into the unit’s ventilation slots, since they may touch
dangerous voltage points or short circuit parts that could result in fire or electrical
shock.
7. Follow all warnings, cautions, and instructions marked on this unit.
8. For protection during violent storms, or when left unattended or unused for long
periods of time, unplug the AC adapter or 12 volt DC power adapter and disconnect
any AV equipment.
9. To prevent possible electrical damage to unit or your vehicle, always unplug the 12
volt DC adapter cord from your vehicle’s accessory power outlet BEFORE removing
the plug from the unit.
10. Never submerge this unit in water.
11. Check unit periodically and discontinue use if parts or accessories are found to be
damaged or defective. To replace worn or defective parts, contact Vector’s Customer
Service department toll-free (866) 584-5504.
SA
VE THESE INSTRUCTIONS
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
the equipment.
VEC135_Manual_051705 5/18/05 2:57 PM Page ii
Page 3
iv 1
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Back-Up Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Powering the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating the AM/FM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the Weather Band Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operating the Lantern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating the LED Area Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Recharging Back-up Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
INTRODUCTION
Thank you for purchasing the
Vector STORMTRACKER™Portable TV/AM/FM/
Emergency/Weather Radio (VEC135).
Please read this guide carefully before
use to ensure optimum performance and to avoid damage to the unit.
FEATURES
• AM/FM/weather band radio with automatic hazard alert
• Built-in 5.5" black-and-white TV (VHF and UHF)
• Hand crank to recharge batteries
• Built-in batteries included for auxiliary back-up power
• Powerful lantern which can tilt up and down
• Long-lasting LED area light
• Built-in earphone or audio outlet
• Includes 12 volt DC and 120 volt AC adapters for external power supplies
• AV out receptacle for external TV connection
• Brightness/contrast/vertical hold TV controls
• Battery, 12 volt DC or 120 volt AC powered
Power System
The
VEC135
has a unique power system. Its primary power source is the common
household “C” size battery, but it may also be powered using the AC-DC power
adapter that plugs into a standard 120 volt AC household outlet, or the VEC135 may
be powered using an external 12 volt DC power supply (such as a car/vehicle’s
accessory outlet) and the 12 volt DC power adapter.
VEC135_Manual_051705 5/18/05 2:57 PM Page iv
Page 4
3
GENERAL OPERATING INSTRUCTIONS
Powering the Unit
The unit can be powered in one of three ways:
1. With nine (9) dry cell “C” size batteries (not included).
2. With household 120 volt AC 60 Hz power and the AC-DC power adapter
included with the unit.
3. With 12 volt DC power and the 12 volt DC power adapter included with the unit.
In addition, a back-up power system consisting of built-in rechargeable batteries
allows the radio and area lights to operate when no other power source is
available. The rechargeable back-up battery is not user-accessible and
can only be used to power the radio and LED area light.
Note: Before first use, the unit’s rechargeable batteries should be charged for a full
12 hours. See also “Recharging Back-Up Power” in the “Care and
Maintenance” section on page 8.
Using the AC-DC Power Adapter
• Plug the AC-DC power adapter’s barrel connector into the “DC 12V IN” receptacle.
• Plug the AC-DC power adapter’s prong connector into a powered 120 volt AC wall
outlet.
• Test by turning the lantern on before proceeding to general operation.
Note:
Lantern is powered by AC/DC adapters as well as “C” Batteries
Do not operate the lantern and TV at the same time when using the 120 volt
AC power adapter.
2
Back-Up Power
This unit also comes with built-in Ni-MH rechargeable batteries, which serve as
“auxiliary” back-up power for the AM/FM/weather radio and LED area light, should
no other power source be available. This auxiliary power system may be recharged
using the AC-DC power adapter plugged into an 120 volt AC household wall outlet,
a 12 volt DC power adapter connected to a 12 volt DC source, or, in emergency
situations when no other power is available, by using the dynamo hand crank.
Note:
Back-up battery power will only operate the radio and LED area light. It cannot
and will not power the TV, lantern.
CONTROLS AND FUNCTIONS
1. 5.5” black-and-white TV
2. Lantern
3. TV/fine tune and VHF/UHF
selector knobs
4. OFF/TV/WEATHER/AM/FM
selector
5. Hazard alert lock selector
6. Weather radio scan control
7. AM/FM Radio Tuner
8. Volume control
9. AM/FM/radio frequency
10. Hand crank to recharge back-up
batteries
11. TV/Radio Speaker
12. Dry cell batter y compartment
13. Fuse
14. DC 12 volt IN adapter jack for
external power supply
15. LED area lights
16. LED area light power switch
17. Built-in TV/radio antenna
18. Earphone jack
19. AV out jack for external TV
connection
20. Vertical Hold/Brightness/Contrast
TV controls
9
4
5
7
18
19
20
13
16
17
12
(Bottom of unit)
8
1
2
15
10
11
3
6
14
VEC135_Manual_051705 5/18/05 2:57 PM Page 2
Page 5
5
OPERATING THE TV
Note: This unit is designed in accordance with North American Standards and may
not receive TV broadcasts in countries that have other broadcasting standards.
WARNING
Operation of a TV in a moving vehicle is not permitted if the driver can
view the screen while driving. Use this appliance in a responsible and
safe manner.
• Extend the built-in TV/radio antenna and adjust for best
reception.
• Turn the OFF/TV/WEATHER/AM/FM dial to the “TV”
position.
• Turn the VHF-L/VHF-H/UHF dial to select the TV band.
• Turn the TV TUNE/FINE TUNE knob to select the desired TV
channel.*
* For available channels, see Specifications.
• Adjust the picture’s brightness, contrast and vertical hold (if
necessary) using the respective knobs on the back panel of the
unit.
• Insert the earphone into the EARPHONE socket if private
listening is desired.
4
Using the 12 Volt DC Power Adapter
• Plug the 12 volt DC power adapter’s barrel connector into the “DC 12V IN”
receptacle.
• Plug the 12 volt DC power adapter’s large connector into a vehicle’s accessory
power outlet or other 12 volt DC power source.
• Test by turning the lantern on before proceeding to general operation.
Using Battery Power
• Open the battery cover and inser t 9 dry cell “C” size batteries.
• Test by turning the lantern on before proceeding to general operation.
VEC135_Manual_051705 5/18/05 2:57 PM Page 4
Page 6
7
OPERATING THE WEATHER BAND RADIO
Notes:
While in the ALERT position, the hazard alarm will sound briefly when a
hazard alert is received. While in the LOCK position, the alarm sounds
continuously when the hazard alert is received.
While in either ALERT or LOCK mode, the AM-FM/weather stations will
function.
The WEATHER RADIO LED will light to indicate a “locked in” weather radio
station.
• Extend the built-in TV/radio antenna and adjust for best
reception.
• Rotate the OFF/TV/WEATHER/AM/FM rotary knob to the
WEATHER position.
• Slide the ALERT selector to the OFF position. (The unit
automatically locates the regional channel. Press or to
search for other available channels.)
• Rotate VOLUME knob to adjust radio volume.
• Insert the earphone into the EARPHONE socket if private
listening is desired.
• Slide the Alert selector to the ALERT or LOCK position for alert
standby mode. Note that the speaker is muted while radio
monitors for a hazard alert.
▲
▲
6
OPERATING THE AM/FM RADIO
• Extend the built-in TV/radio antenna and adjust for best
reception.
• Rotate the OFF/TV/WEATHER/AM/FM rotary knob to the
desired frequency (the AM or FM position).
• Rotate the Radio Tuner knob to tune to the desired station.
Adjust the antenna if necessary for better reception.
• Rotate the Volume knob to adjust radio volume.
• Insert the earphone into the EARPHONE socket if private
listening is desired.
VEC135_Manual_051705 5/18/05 2:57 PM Page 6
Page 7
9
Replacement Parts
For replacement parts (bulbs, Ni-MH batteries, fuses, etc.), contact Vector Customer
Service, toll-free, at (866) 584-5504.
Battery Replacement
It is recommended that the unit be returned to manufacturer for battery replacement.
Contact Vector Customer Service, toll-free, at (866) 584-5504.
WARNING
• Do not dispose of the battery in fire. This may result in an explosion.
• Before disposing of the battery, protect exposed terminals with
heavy-duty electrical tape to prevent shorting, which can result in
injury or fire.
• Do not expose the battery to fire or intense heat as it may explode.
Battery Disposal
This unit contains a Ni-MH battery. Dispose of used batteries properly. For more
information on recycling batteries, call toll free (800) 822-8837.
Fuse Replacement
1. Using a screwdriver, open the fuse cover and remove the defective fuse.
2. Insert a replacement 2 amp fuse into the FUSE socket.
3. Close the fuse cover.
CAUTION
THIS UNIT USES A 2 AMP FUSE. FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE, REPLACE THE FUSE ONLY WITH ONE OF THE
SAME TYPE AND RATING.
8
OPERATING THE LANTERN
The lantern can be tilted up and down to direct the beam where
you need it. It is controlled by the ON/OFF trigger switch located
beneath the unit handle.
Make sure the light is turned OFF when the unit is being recharged
or stored.
Note:
Do not operate the lantern and TV at the same time when using the 120 volt
AC adapter.
OPERATING THE LED AREA LIGHTS
The LED Area Lights are controlled by the ON/OFF switch on top
of the lantern. Slide the switch to the ON position to turn the LEDs
on. Slide the switch to the OFF position to turn the LEDs off.
CARE AND MAINTENANCE
Recharging Back-up Power
120 Volt AC Charging
You can watch TV or listen to the radio while charging the back-up power battery.
1. Plug the AC plug of the AC/DC adapter/charger into any
standard 120 volt AC wall outlet.
2. Plug the barrel connector attached to the AC/DC
adapter/charger into the small barrel receptacle labeled “DC
12V IN”.
3. Charge the back-up power battery regularly so it is ready for
emergency use.
Note:
The unit cannot be overcharged using the AC method.
Using the Hand Crank
For ease of use, the crank handle can be “locked” into place. Flip
the handle to release and press it against the unit body to secure
into position. Rotate the dynamo crank handle to generate power
if back-up battery power is low and to recharge the back-up
rechargeable batteries.
Note:
The back-up power operates the LED area lights and the radio only. The TV and
lantern will not operate from the back-up power, they operate only from the
replaceable “C” size batteries, AC adapter or 12 volt DC power adapter.
VEC135_Manual_051705 5/18/05 2:57 PM Page 8
Page 8
1110
SPECIFICATIONS
Model No.: VEC135
Operating Voltage: 12 volt DC
TV Channels: VHF-L: Channels 2-6
VHF-H: Channels 7-13
UHF: Channels 14-83
Radio Stations: AM: 530-1710 kHz
FM: 88-108 MHz
Weather: 162.400, 162.425, 162.450,
162.475, 162.500, 162.525, and 162.550 MHz
Weather Radio Sensitivity: 0.6µV@12dB SINAD
0.5µV@1050 Hz alert tone
Speaker: 8 ohm, 1W
Fuse: 2A, 125V
AC/DC Adapter: 120 Volt AC input, 12 Volt DC, 1200 mA output
DC Adapter: 12 Volt DC, 2 amps
Lantern Bulb: 12V, Krypton
Built-In Rechargeable
Battery: Ni-MH 3.6V, 600 mAh
VEC135_Manual_051705 5/18/05 2:57 PM Page 10
Loading...