Vector SMATE200A User Manual

Vector Signal Generator ¸SMATE200A
Configuration Guide
Version
01.00
April 2005
This document guides you step-by-step through the configuration procedure for the Vector Signal Generator R&S SMATE200A. Each step indicates whether an option is mandatory or optional and also provides the following information:
Option Name of the option Description Description of the option Requires Options required in order to install the selected option Not compatible with Options incompatible with the selected option HW or SW Identifies the option as a hardware or software option Remarks Special remarks such as “factory-installed”
Mandatory fields that list various selectable options apply only if the step that includes them is chosen (e.g. choosing a baseband source is mandatory only if the instrument is to be equipped with a baseband path).
The R&S SMATE200A can be equipped with up to two RF paths as well as two baseband paths (A and B), which effectively means two independent signal generators in one cabinet of only four height units. For easier configuration of the instrument to be used, this guide has been divided into two sections:
Single-path instrument – starting on page 3 Two-path instrument – starting on page 6
An overview of available options is provided on page 3. Configuration Examples are given on page 10.
Beside this paper version, you can also find an interactive product configurator online on the SMATE200A website under
www.smate.rohde-schwarz.com.
Vector Signal Generator R&S SMATE200A 2

Option overview

Base Unit
RF path A
Baseband
Options marked with 2x stalled twice
(first in baseband path
can be in-
A, second in baseband path B)
SMATE-B22
1401.2507.02
FM/PhiM Modulator
and Low Phase Noise
SMATE-K62
1404.5807.02
Additive White Gaussian Noise
SMATE-B103
1401.1000.02
100 kHz to 3 GHz
1st RF Path
SMATE-B31
1401.1800.02
High Power Output
1st RF Path
SMATE-B10
2x
1401.2707.02
Baseband Generator
ARB (64 MSamples)
SMATE200A
1400.7005.02
Vector Signal
Generator
SMATE-B106
1401.1200.02
100 kHz to 6 GHz
1st RF Path
SMATE-B13
1401.2907.02
Baseband Main
Module
2x 2x
2x
SMATE-B11
1401.2807.02
Baseband Generator
ARB (16 MSamples)
SMATE-K
SMATE-B203
1401.1400.02
100 kHz to 3 GHz
2nd RF Path
SMATE-B22
1401.2507.02
FM/PhiM Modulator
and Low Phase Noise
Software
Option
SMATE-B206
100 kHz to 6 GHz
High Power Output
SMATE-B
Hardware
1401.1600.02
2nd RF Path
SMATE-B36
1401.2107.02
2nd RF Path
Option
RF path B
SMATE-B16
1401.2407.02
Differential
I/Q out
SMATE-K42
1404.5207.02
Digital Standard
3GPP FDD
SMATE-K43
1404.5307.02
3GPP Enhanc
MS/BS Tests incl. HSDPA
Vector Signal Generator R&S SMATE200A 3
2x
2x 2x 2x 2x
ed rd
SMATE-K40
1404.5107.02
Digital Standard
GSM / EDGE
2x
SMATE-K46
1404.5507.02
Digital Standard
CDMA2000
incl. 1xEV-DV
2x
SMATE-K61
1404.5707.02
Multicarrier C
Signals
SMATE-K11
2x 2x
W
1404.5907.02
Digital Standard
IS-95
SMATE-K15
1404.6303.02
User-Defined
OFDM Signals
SMATE-K12
1404.6003.02
Digital Standard
CDMA2000
SMATE-K17
1404.6403.02
Digital Standard
1xEV-DO
2x
SMATE-K13
Digital Standard
SMATE-K19
Digital Standard
IEEE 802.11 (a/b/g)
1404.6090.02
3GPP TDD
1404.6503.02
SMATE-K14
2x 2x
1404.6203.02
Digital Standard
TD-SCDMA
SMATE-K20
1404.6603.02
Digital Standa
3GPP FDD
incl. HSDPA
2x
Single-path instrument
Applies if the instrument is equipped with one RF path and no more than one baseband path.
Step c Configure RF path MANDATORY

Choose frequency range (only one choice possible) MANDATORY

Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz SMATE200A SMATEB106 HW Factory-installed SMATEB106 100 kHz to 6 GHz SMATE200A SMATEB103 HW Factory-installed
Choose output configuration OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-B22 Low Phase Noise and analog
modulation FM and PhiM
SMATE-B31 High-Power Output SMATEB10x - HW Factory-installed
Step d Configure baseband path OPTIONAL
Choose baseband source MANDATORY
Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATEB10x - HW Factory-installed.
SMATE-B10
SMATE-B11 Baseband Generator with
Baseband Generator with ARB (64 MSamples) and Digital Modulation
ARB (16 MSamples) and Digital Modulation
SMATEB10x - HW Factory-installed
Requires SMATEB10, SMATE-B11 or SMATEK62.
SMATE-B13 SMATEB11 HW Factory-installed
SMATE-B13 SMATEB10 HW Factory-installed
Choose baseband hardware OPTIONAL
SMATE-B16 Differential I/Q Output SMATE-B10 or B11 - HW Factory-installed

Choose digital modulation systems OPTIONAL

Option Description Requires Not compatible with HW or SW Remarks SMATE-K40 Dig. Std. GSM/EDGE SMATE-B10 or B11 - SW SMATE-K42 Dig. Std. 3GPP FDD SMATE-B10 or B11 - SW SMATE-K43 3GPP enhanced MS/BS tests
incl. HSDPA SMATE-K46 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW SMATE-K61 Multicarrier CW Signal
Generation
Vector Signal Generator R&S SMATE200A 4
SMATE-K42 - SW
SMATE-B10 or B11 - SW
Choose digital modulation systems with R&S WinIQSIM
1
OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW SMATE-K12 Dig. Std. cdma2000 SMATE-B10 or B11 - SW SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW SMATE-K17 Dig. Std. 1xEV-DO SMATE-B10 or B11 - SW SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g) SMATE-B10 or B11 - SW SMATE-K20
Dig. Std. 3GPP incl. HSDPA
SMATE-B10 or B11
- SW
With WinIQSIM With WinIQSIM With WinIQSIM With WinIQSIM With WinIQSIM and WinIQOFDM With WinIQSIM With WinIQSIM With WinIQSIM
SMATE-K5 Bluetooth SMATE-B10 or B11 - SW With application software on an external PC
Choose noise OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K62 Additive White Gaussian
Noise (AWGN)
SMATE-B13 - SW
1
R&S WinIQSIM™ requires an external PC.
Vector Signal Generator R&S SMATE200A 5

Two-path instrument

Applies if the instrument is equipped with up to two RF paths and up to two baseband paths.
Step c Configure RF path A MANDATORY

Choose frequency range (only one choice possible) MANDATORY

Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz SMATE200A SMATEB106 HW Factory-installed SMATEB106 100 kHz to 6 GHz SMATE200A SMATEB103 HW Factory-installed
Choose output configuration OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-B22 Low Phase Noise and analog
modulation FM and PhiM SMATE-B31 High-Power Output SMATEB10x - HW Factory-installed

Step d Configure RF path B OPTIONAL

Choose frequency range (only one choice possible) MANDATORY

Option Description Requires Not compatible with HW or SW Remarks SMATEB203 100 kHz to 3 GHz SMATEB10x SMATEB206 HW Factory-installed SMATEB206 100 kHz to 6 GHz SMATEB10x SMATEB203 HW Factory-installed
Choose output configuration OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-B22 Low Phase Noise and analog
modulation FM and PhiM
SMATE-B36 High-Power Output SMATEB20x - HW Factory-installed
SMATEB10x - HW Factory-installed
SMATEB10x - HW Factory-installed
Second option for path B. If only once installed it will added to path A automatically.
Vector Signal Generator R&S SMATE200A 6
Step e Configure baseband path A OPTIONAL

Choose baseband source MANDATORY

Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATEB10x - HW Factory-installed. Requires SMATE-B10, SMATE-
B11 or SMATE-K62.
SMATE-B10
SMATE-B11 Baseband Generator with
Choose baseband hardware OPTIONAL
SMATE-B16 Differential I/Q Output SMATE-B10 or B11
Choose digital modulation systems OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K40 Dig. Std. GSM/EDGE SMATE-B10 or B11 - SW SMATE-K42 Dig. Std. 3GPP FDD SMATE-B10 or B11 - SW SMATE-K43 3GPP enhanced MS/BS tests
SMATE-K46 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW SMATE-K61 Multicarrier CW Signal Gen-
Choose digital modulation systems with R&S WinIQSIM
Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW SMATE-K12 Dig. Std. cdma2000 SMATE-B10 or B11 - SW SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW SMATE-K17 Dig. Std. 1xEV-DO SMATE-B10 or B11 - SW SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g) SMATE-B10 or B11 - SW SMATE-K20
SMATE-K5 Bluetooth SMATE-B10 or B11 - SW With application software on an external PC
Baseband Generator with
ARB and Digital Modulation
ARB (16 MSamples) and
Digital Modulation
incl. HSDPA
eration
Dig. Std. 3GPP incl. HSDPA
SMATE-B13
(in baseband path A)
SMATE-B13
(in baseband path A)
SMATE-B11
(in baseband path A)
SMATE-B10
(in baseband path A)
HW Factory-installed
HW Factory-installed
HW Can only be installed only once.
(in baseband path A)
SMATE-K42 - SW
SMATE-B10 or B11 - SW
1
SMATE-B10 or B11
- SW
Factory-installed

OPTIONAL

With WinIQSIM With WinIQSIM With WinIQSIM With WinIQSIM With WinIQSIM and WinIQOFDM With WinIQSIM With WinIQSIM With WinIQSIM
1
R&S WinIQSIM™ requires an external PC.
Vector Signal Generator R&S SMATE200A 7
Choose noise OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K62 Additive White Gaussian
Noise (AWGN)
SMATE-B13 - SW

Step f Configure baseband path B OPTIONAL

Choose baseband source MANDATORY

Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATE-B13
(in baseband path A)
SMATE-B10
SMATE-B11 Baseband Generator with
Baseband Generator with
ARB and Digital Modulation
ARB (16 MSamples) and
Digital Modulation
SMATE-B13
(in baseband path A or B)
and SMATE-B10
(in baseband path A)
SMATE-B13
(in baseband path A or B)
and SMATE-B10 or
SMATE-B11
(in baseband path A)
SMATE-B11 in path A
(in baseband path B)
(in baseband path B)
- HW Factory-installed. Requires SMATE-B10, SMATE­B11 (in baseband path A or B) or SMATE-K62.
HW Factory-installed
SMATE-B11
SMATE-B10
HW Factory-installed
Choose digital modulation systems OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K40 Dig. Std. GSM/EDGE SMATE-B10 or B11 - SW SMATE-K42 Dig. Std. 3GPP FDD SMATE-B10 or B11 - SW SMATE-K43 3GPP enhanced MS/BS tests
incl. HSDPA SMATE-K46 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW SMATE-K61 Multicarrier CW Signal Gen-
eration
Vector Signal Generator R&S SMATE200A 8
SMATE-K42 - SW
SMATE-B10 or B11 - SW
Choose digital modulation systems with R&S WinIQSIM
1
OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW SMATE-K12 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW SMATE-K17 Dig. Std. 1xEV-DO SMATE-B10 or B11 - SW SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g) SMATE-B10 or B11 - SW SMATE-K20
Dig. Std. 3GPP incl. HSDPA
SMATE-B10 or B11
- SW
With WinIQSIM With WinIQSIM With WinIQSIM With WinIQSIM With WinIQSIM and WinIQOFDM With WinIQSIM With WinIQSIM With WinIQSIM
Choose noise OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks SMATE-K62 Additive White Gaussian
Noise (AWGN)
Note: Digital modulation systems and noise can be used either in baseband path A or baseband path B. The digital modulation systems or noise will be required twice
only if the baseband paths are used simultaneously. (For example, an instrument is equipped with one R&S SMATE-K40 and two R&S SMATE-B10. In this con­figuration, R&S SMATE-K40 can be used either on baseband path A or baseband path B. For simultaneous use on both baseband paths, R&S SMATE-K40 woul d be required twice.)
As only one set of Differential I/Q outputs SMATE-B16 can be installed, they can be switched to path A or B like the I/Q-outputs.
SMATE-B13 - SW
1
R&S WinIQSIM™ requires an external PC.
Vector Signal Generator R&S SMATE200A 9

Configuration Examples

SMATE
B10xSMATE
B10
SMATE
B13
SMATE
B13
SMATE
B20
The modular design of the R&S SMATE200A allows the instrument to be equipped with up to two paths. This allows a multitude of applications to be performed for which several signal generators were previously requi red .

One baseband generator and one RF path

SMATE-B10 SMATE-B13 SMATEB10x
Instrument configuration Option Installed Description
SMATE200A 1x Base unit SMATEB10x 1x Frequency option SMATE-B13 1x Baseband main module SMATE-B10 1x Baseband generator
Application example
¾ Generation of digitally modulat ed sig nals

One baseband generator and two RF paths

-
Instrument configuration Option Installed Description
SMATE200A 1x Base unit SMATEB10x 1x Frequency option 1st RF path SMATEB20x 1x Frequency option 2nd RF path SMATE-B13 2x Baseband main module SMATE-B10 1x Baseband generator
Application example
¾ Interference test with same digital signal ¾ Simulation of antenna diversi t y
-
-
x
Vector Signal Generator R&S SMATE200A 10

One baseband generator and two RF paths

SMATE
B10xSMATE
B10
SMATE
B13
SMATE
B10
SMATE
B13 SMATE
B10
SMATE
B10
SMATE
B13
SMATE
B20
SMATE
B20

Two baseband generators and two RF paths

-
-
x
x
Instrument configuration Option Installed Description
SMATE200A 1x Base unit SMATEB10x 1x Frequency option 1st RF path SMATEB20x 1x Frequency option 2nd RF path SMATE-B13 1x Baseband main module SMATE-B10 1x Baseband generator
Application example
¾ Generation of a modulated signal on path A and a CW interferer on
path B
-
-
-
-
x
Instrument configuration Option Installed Description
SMATE200A 1x Base unit SMATEB10x 1x Frequency option 1st RF path SMATEB20x 1x Frequency option 2nd RF path SMATE-B13 2x Baseband main module SMATE-B10 2x Baseband generator
Application example
¾ Generation of a wanted signal and an interfering signal for receiver
tests
¾ Generation of multicarrier signals with extremely wide bandwidth
(>80 MHz)
Vector Signal Generator R&S SMATE200A 11

Ordering information

Vector Signal Generator
1
including power cable, Quick Start Guide and CD-ROM (with operating and service manual)
Options
RF path A 100 kHz to 3 GHz R&S SMATEB103 1401.1000.02 100 kHz to 6 GHz R&S SMATEB106 1401.1200.02 Low Phase Noise and analog modulation FM / PhiM R&S SMATE-B22 1401.2507.02 High-Power Output R&S SMATE-B31 1401.1800.02
RF path B 100 kHz to 3 GHz R&S SMATEB203 1401.1400.02 100 kHz to 6 GHz R&S SMATEB206 1401.1600.02 Low Phase Noise and analog modulation FM / PhiM R&S SMATE-B22 1401.2507.02 High-Power Output R&S SMATE-B36 1401.2107.02
Baseband Baseband Generator with ARB (64 Msamples) and Digital Modulation (realtime) Baseband Generator with ARB (16 Msamples) and Digital Modulation (realtime) Baseband Main Module R&S SMATE-B13 1401.2907.02 Differential I/Q Output R&S SMATE-B16 1401.2407.02
Digital modulation systems Digital Standard GSM/EDGE R&S SMATE-K40 1404.5107.02 Digital Standard 3GPP FDD R&S SMATE-K42 1404.5207.02 3GPP enhanced MS/BS tests incl. HSDPA R&S SMATE-K43 1404.5307.02 Digital Standard CDMA2000 incl. 1xEV-DV R&S SMATE-K46 1404.5507.02 Multicarrier CW Signal Generation R&S SMATE-K61 1404.5707.02
R&S SMATE200A 1400.7005.02
R&S SMATE-B10 1401.2707.02
R&S SMATE-B11 1401.2807.02
Vector Signal Generator R&S SMATE200A 12
Digital modulation systems using R&S WinIQSIM
2
Digital Standard IS-95 (with R&S WinIQSIM™) Digital Standard CDMA2000 (with R&S WinIQSIM™) Digital Standard 3GPP TDD (with R&S WinIQSIM™) Digital Standard TD-SCDMA (with R&S WinIQSIM™) User-Defined OFDM Signals (with R&S WinIQSIM
R&S SMATE-K11 1404.5907.02 R&S SMATE-K12 1404.6003.02 R&S SMATE-K13 1404.6090.02 R&S SMATE-K14 1404.6203.02
R&S SMATE-K15 1404.6303.02 and R&S WinIQOFDM) Digital Standard 1xEV-DO (with R&S WinIQSIM™) Digital Standard IEEE 802.11 (a/b/g) (with R&S WinIQSIM™) Digital Standard 3GPP FDD incl. HSDPA (with R&S WinIQSIM™)
R&S SMATE-K17 1404.6403.02
R&S SMATE-K19 1404.6503.02
R&S SMATE-K20 1404.6603.02
Digital modulation systems using external PC software Bluetooth (with external SW) R&S SMAT E - K5 1404.7000.02
Noise Additive White Gaussian Noise (AWGN) R&S SMATE-K62 1404.5807.02
Recommended extras
Hardcopy manuals (in English, USA) 1401.0940.39 19" Rack Adapter R&S ZZA-411 1096.3283.00 Adapter for Telescopic Sliders R&S ZZA-T45 1109.3774.00 BNC Adapter for AUX I/O connector R&S SMATE-Z5 1160.4545.02 Keyboard with USB Interface (US assignment) R&S PSL-Z2 1157.6870.03 Mouse with USB interface, optical R&S PSL-Z10 1157.7060.02 External USB CD-RW Drive R&S PSP-B6 1134.8201.12
1
The base unit can only be ordered with an R&S SMATEB10x frequency option.
2
R&S WinIQSIM ™ requires an external PC.
Vector Signal Generator R&S SMATE200A 13
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG · Trade names are trademarks of the owners
SMATE200A Version 01.00 April 2005 Data without tolerance limits is not binding Subject to change
®
R&S
Europe: Tel. +49 1805 12 4242, e-mail: customersupport@rohde-schwarz.com · North America: Tel. +1 410-910-7988, e-mail: customer.support@rsa.rohde-schwarz.com
Asia: Tel. +65 68463710, e-mail: customer-service@rssg.rohde-schwarz.com
www.rohde-schwarz.com
R&S
Loading...