Vector JUMP-START SYSTEM, VEC012APM Owner's Manual & Warranty Information

2 YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of Vector
Manufacturing, Ltd., regarding this product. There is no other warranty, other than those described herein.

This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials and work­manship for two years from the date of purchase without additional charge. The warranty does not extend to subsequent pur­chasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of damage in excess of the retail purchase
price of the product under any circumstances. Incidental and consequential damages are specifically excluded from coverage
under this warranty.

This product is not intended for commercial use. This warranty does not apply to accessories or damage to units from misuse or
incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.

RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid to Vector Manufacturing.
Any defective product, other than accessories, that is returned to Vector Manufacturing within
30 days of the date of purchase will be replaced free of charge. If such a product is returned more than 30 days but less than
two years from the purchase date, Vector Manufacturing will repair the unit or, at its option, replace it free of charge.

If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option.
A unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will
then be warranted under the terms of the remainder of the warranty period. The customer is responsible for the shipping charges
on all returned items after 30 days. During the warranty period, Vector Manufacturing, Ltd. will be responsible for the return ship­ping charges.

LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal wear and tear
(including chips, scratches, abrasions, discoloration or fading due to usage or exposure to sunlight),
accidents, damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure
to follow instructions for care and maintenance, fire, flood and Acts of God.

If your problem is not covered by this warranty, call our Technical Support Department at [phone] or Toll Free at (866)
584-5504 for general repair information and charges if applicable. You may also contact us through our website at www.vec­tormfg.com.

STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the exclusions or limitations
stated herein may not apply. This warranty gives the purchaser specific legal rights; other rights, which vary from state to state, may
apply .

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support by telephone,
fax or mail. We suggest that you keep the original packaging in case you need to ship the unit. When returning a product, include
your name, address, phone number, dated sales receipt (or copy) and a description of the reason for return and product serial
number. After repairing or replacing the unit, we will make every effor t to return it to you within four weeks.

WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter
“VEC012APM” as Model and “

JUMP-START SYSTEM”

as Product Type. All Vector Manufacturing, Ltd. products must be regis­tered within 10 days of purchase to activate this warranty. Mail the completed registration form, along with a copy of the origi­nal sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.

4140 SW 28th Way, Ft. Lauderdale, FL 33312

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: [phone].

You may also contact us at our web site www.vectormfg.com.

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

REV101603

VEC012APM

OWNER’S MANUAL &

WARRANTY INFORMATION

THIS MANUAL CONTAINS IMPOR T ANT INFORMA TION REGARDING SAFETY, OPERA TION, MAINTENANCE
AND STORAGE OF THIS PRODUCT. BEFORE USING, READ AND UNDERSTAND ALL CAUTIONS,
WARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE’S BATTERY MANUFACTURER
GUIDELINES. FAILURE TO DO SO COULD RESULT IN INJURY AND/OR PROPERTY DAMAGE.

4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312

TEL: [phone] • FAX: [phone] • TOLL-FREE 866-584-5504

www.vectormfg.com

JUMP-START SYSTEM

12 VOLT DC POWER SUPPLY

1

CONTENTS

1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

2. USING VECTOR JUMPER AS A JUMP-START SYSTEM . . . . . . . . . 6

2.1 Easy, Step-by-Step Jump-starting Instructions . . . . . . . . . . . . 7

3. CHARGING/RECHARGING . . . . . . . . . . . . . . . . . . . . . . . . 8-9

3.1 110/120 Volt AC Charging . . . . . . . . . . . . . . . . . . . . . . 9

3.2 12 Volt DC Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.3 Estimated Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4. OPERATING AS A PORTABLE POWER SUPPLY . . . . . . . . . . . . . . 9

5. EMERGENCY/WORKLIGHT . . . . . . . . . . . . . . . . . . . . . . . . . 10

6. REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.1 Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.2 Battery Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

8. WARRANTY

2

Safety information

WARNING:

(Warning statements identify conditions or practices that may result in personal
injury or loss of life)

1) When working with lead acid batteries, always make sure immediate assistance
is available in case of accident or emergency.

2) Always use protective eyewear when using this product: contact with battery acid
may cause blindness and/or severe burns, be aware of first aid procedures in
case of accidental contact with battery acid.

3) There is a risk of explosive gases being released when lead acid batteries are
being charged or discharged. Failure to follow instructions may cause property
damage, explosive hazard, and/or personal injury.

4) When connecting the battery clamps to a discharged battery, and an alarm
sounds - the polarity is reversed.

5) When charging unit from a 110/120 V olt AC electrical outlet in any wet or damp
area, make sure that the outlet used is protected by a ground fault interrupt
(GFI) Switch.

6) When charging the unit near water, do not allow the electrical cords and outlets
to get wet or come near water–electrical shock could result.

7) Jump-start procedures should only be performed in a safe, dry , well-ventilated area.

8) Always store battery clamps in built-in holsters when not in use. Never touch
battery clamps together, this can cause dangerous sparks, power arcing and/
or explosion.

9) When using this unit in proximity to the vehicle’s battery and engine, stand the
unit on a flat, stable surface, and be sure to keep all clamps, cords, clothing
and body parts away from moving vehicle components.

10) Do not wear vinyl clothing when jump-starting a vehicle, friction can cause

dangerous static-electricity sparks. Remove all jewelry or metal objects that
could cause short circuits or react with batter y acid.

11) Always disconnect the negative (Black) jumper cable first: followed by the

positive (Red) jumper cable, except for positive ground systems.

12) Never allow red and black clamps to touch each other or another common

metal conductor–this could cause damage to the unit and/or create sparking/
explosion hazard. Always store battery clamps in built-in holsters when not in use.

13) Do not expose battery to fire or intense heat as it may explode. Before disposing

of the battery, protect exposed terminals with heavy-duty electrical tape to prevent
shorting (shorting can result in injury or fire).

14) Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while

working on a vehicle’s battery system.

15) Keep unit out of reach of children (whether stored, or in use)!

FIRST AID

SKIN: If battery acid comes in contact with skin, rinse immediately with water, then
wash thoroughly with soap and water. If redness, pain, or irritation occurs, seek
immediate medical attention.
EYES: If battery acid comes in contact with eyes, flush eyes immediately, for a
minimum of 15 minutes and seek immediate medical attention.