Vector F-5 US User Manual
[Operating Instruction]
PROFESSIONAL SOUND SPEAKER SYSTEM
Model F-5 us
General description
The Toa F-5 is a full-range, bass-reflex type speaker having a 4-inch
(10 cm) speaker with 10-watt power handling capacity. Small in size,
it can be easily mounted on the wall. Push terminals are provided on
the rear panel for high impedance applications. By changing the internal wire connection this speaker can also be used for low impedance applications.
Installation
Using the supplied wall mounting pattern for correct positioning, drive two wood screws
or anchor bolts into the wall surface to a head height of less than 0.3" (8mm). Then insert
two fixing holes on the speaker's rear c o ve r onto the screws or anchor bolts for mounting.
(The pattern is printed on a flap of the carton box containing this speaker.)
Less
than
0.3"
Wall
(8mm)
Changing the wattage
3" (76mm)
Less than 0.3" (8mm)
(impedance)
Precaution
3.5 Ibs (1.6 kg). When there is a
danger that the speaker falls,
reinforce the wall strength with
anchor bolts, etc.
The speaker weighs
The F-5 is factory-preset to 10 watts (490 ohms). Follow the instructions below to change
the wattage.
Remove four screws on the rear and detach a baffle board from an enclosure.
Change the connection of a red input lead from the prewired tap to that of desired im-
pedance (wattage). In this event, tighten the connection.
To speaker unit (Red and black)
Red lead
Black lead
From input terminal
Do not change the connection
of black lead.
Impedance
Wattage
490 ohms
10W
980 ohms
5W
Specifications
Type:
Rated input
power:
Nominal
impedance:
Output sound
pressure level:
Frequency
response:
Speaker:
Ambient
temperature:
Material:
Dimensions:
Weight:
Bass reflex type
10 watts
490 ohms (10 watts)
980 ohms (5 watts)
88 dB/W/m
100 - 18000 Hz
4" (10 cm) dynamic speaker
–4°Fto +131°F
(–20°C to +55°C)
Polypropylene
7.76(W)×5.43(H)×5.98(D) inches
197(W)×138(H)×152(D) mm
3.5 Ibs
1.6 kg
(The sound pressure level of siren sound is 90 dB/m or more for any impedance.)
For low impedance applications, remove a red lead and a black lead
connecting between the matching transformer and speaker unit. Then
connect both leads from the input terminal directly to the speaker unit.
(Connect the red lead to " + " terminal of the speaker unit.)
When not using matching trans
Handling
capacity:
Impedance:
10W (continuous pink noise)
30W (continuous pro gr a m)
8 ohms
Characteristic Diagram
(1W/1m in anechoic chamber, 1/3 octave pink noise)
Toa Electric Co . , Ltd.
KOBE, JAPAN
133-01-279-60
Loading...