Vecow ECS-9740-505M-GTX1050T, ECS-9740-820Q-GTX1050T, ECS-9600-820Q-GTX1050T, ECS-9600-820Q-GTX1050, ECS-9600-505M-GTX1050T User Manual

USER
Manual

USER
Manual

1.1.0 Edition 20171103

ECS-9700/9600 GTX1050

Quad Core Intel® Xeon®/ Core™ i7 Processor Embedded System with

Intel

®

CM236 & NVIDIA GEFORCE® GTX1050 Ti/GTX1050 Graphics,

High Performance, Independent Graphics, all-in-one integrated

ii

Version Date Page Description Remark

1.0 07/25/2017 All Ofcial Release

1.1 11/03/2017 49-62 Update

Record of Revision

iii

This manual is released by Vecow Co., Ltd. for reference purpose only. All
product offerings and specications are subject to change without prior notice.
It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable
for direct, indirect, special, incidental, or consequential damages arising out of
the use of the product or documentation or any infringements upon the rights of
third parties, which may result from such use.

This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if it is not installed and used
in accordance with the instruction manual, it may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

FCC

The products described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to
remain CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.

CE

This document contains proprietary information protected by copyright. No part
of this publication may be reproduced in any form or by any means, electric,
photocopying, recording or otherwise, without prior written authorization
by Vecow Co., Ltd. The rights of all the brand names, product names, and
trademarks belong to their respective owners.

Disclaimer

Declaration of Conformity

Copyright and Trademarks

iv

Part Number Description

ECS-9740-505M-

GTX1050T

ECS-9700, Intel® Xeon® E3-1505M v5,
NVIDIA GeForce® GTX1050 Ti, 6 GigE LAN w/4 PoE+, 2 SSD,
6 USB 3.0, 4 COM, 4 SIM, 32 Isolated DIO (ECC supported)

ECS-9740-505M-

GTX1050

ECS-9700, Intel

®

Xeon® E3-1505M v5,
NVIDIA GeForce® GTX1050, 6 GigE LAN w/4 PoE+, 2 SSD,
6 USB 3.0, 4 COM, 4 SIM, 32 Isolated DIO (ECC supported)

ECS-9740-820Q-

GTX1050T

ECS-9700, Intel

®

Core™ i7-6820EQ,
NVIDIA GeForce® GTX1050 Ti, 6 GigE LAN w/4 PoE+, 2 SSD,
6 USB 3.0, 4 COM, 4 SIM, 32 Isolated DIO

ECS-9740-820Q-

GTX1050

ECS-9700, Intel

®

Core™ i7-6820EQ,
NVIDIA GeForce® GTX1050, 6 GigE LAN w/4 PoE+, 2 SSD,
6 USB 3.0, 4 COM, 4 SIM, 32 Isolated DIO

ECS-9600-505M-

GTX1050T

ECS-9600, Intel

®

Xeon® E3-1505M v5,
NVIDIA GeForce

®

GTX1050 Ti, 2 GigE LAN, 2 SSD, 6 USB 3.0,

4 COM, 4 SIM, 16 Isolated DIO (ECC supported)

ECS-9600-505M-

GTX1050

ECS-9600, Intel

®

Xeon® E3-1505M v5,
NVIDIA GeForce

®

GTX1050, 2 GigE LAN, 2 SSD, 6 USB 3.0,

4 COM, 4 SIM, 16 Isolated DIO (ECC supported)

ECS-9600-820Q-

GTX1050T

ECS-9600, Intel

®

Core™ i7-6820EQ,
NVIDIA GeForce® GTX1050 Ti, 2 GigE LAN, 2 SSD, 6 USB 3.0,
4 COM, 4 SIM, 16 Isolated DIO

ECS-9600-820Q-

GTX1050

ECS-9600, Intel

®

Core™ i7-6820EQ,
NVIDIA GeForce® GTX1050, 2 GigE LAN, 2 SSD, 6 USB 3.0,
4 COM, 4 SIM, 16 Isolated DIO

Order Information

v

Part Number Description

DDR4 16G

Certied DDR4 16GB 2133MHz RAM

DDR4 8G

Certied DDR4 8GB 2133MHz RAM

DDR4 4G

Certied DDR4 4GB 2133MHz RAM

PWA-280WB-WT 280W, 24V, 85V AC to 264V AC Power Adapter with 3-pin

Terminal Block (7.62mm pitch), Wide Temperature -30°C to
+70°C

PWA-160WB-WT 160W, 24V, 85V AC to 264V AC Power Adapter with 3-pin

Terminal Block (7.62mm pitch), Wide Temperature -30°C to
+70°C

VESA Mount

VESA Mounting Kit

DIN-RAIL

DIN Rail Kit

Rack Mount

2U Rackmount Kit

TMK2-20P-100

Terminal Block 20-pin to Terminal Block 20-pin Cable, 100cm

TMK2-20P-500

Terminal Block 20-pin to Terminal Block 20-pin Cable, 500cm

TMB-TMBK-20P Terminal Board with One 20-pin Terminal Block Connector

and DIN-Rail Mounting

3G Module

Mini PCIe 3G/GPS Module with Antenna

4G Module

Mini PCIe 4G/GPS Module with Antenna

WiFi & Bluetooth
Module

Mini PCIe WiFi & Bluetooth Module with Antenna

Order Accessories

vi

Table of Contents

CHAPTER 1 GENERAL INTRODUCTION 1

1.1 Overview 1

1.2 Features 2

1.3 Product Specication 2

1.3.1 Specications of ECS-9740 GTX1050 2

1.3.2 Specications of ECS-9600 GTX1050 4

1.4 Supported CPU List 7

1.5 Mechanical Dimension 8

1.5.1 Dimensions of ECS-9740 GTX1050 8

1.5.2 Dimensions of ECS-9600 GTX1050 8

CHAPTER 2 GETTING TO KNOW YOUR
ECS-9700/9600 GTX1050 9

2.1 Packing List 9

2.2 Front Panel I/O & Functions 10

2.3 Rear Panel I/O & Functions 18

2.4 Main Board Expansion Connectors 26

2.5 Main Board Jumper & Deep Switch Settings 40

2.6 Ignition Control 45

CHAPTER 3 SYSTEM SETUP 49

3.1 How to Open Your ECS-9700/9600 GTX1050 49

3.2 Installing DDR4 SO-DIMM Modules 52

3.3 Installing Mini PCIe Card 53

3.4 Installing CFast Card 54

3.5 Installing SIM Card 55

3.6 Installing SSD/ HDD 56

3.7 Mounting Your ECS-9700/9600 GTX1050 58

vii

CHAPTER 4 BIOS SETUP 63

4.1 Entering BIOS SETUP 63

4.2 Main 64

4.3 Advanced 64

4.4 Chipset 74

4.5 Security 79

4.6 Boot 80

4.7 Save & Exit 81

APPENDIX A : Isolated DIO Guide 82

APPENDIX B : Software Functions 89

APPENDIX C : RAID Installation Guide 93

APPENDIX D : Power Consumption 97

APPENDIX E : Supported Memory & Storage List 99

APPENDIX F : Graphics Performance 103

1

GENERAL INTRODUCTION

1

GENERAL INTRODUCTION

Vecow ECS-9700/9600 GTX1050 series is an all-in-one integrated, high­performance embedded system. Powered by workstation-grade Intel® Xeon®/
Core™ i7 processor (Skylake-H) running with dual-channel DDR4 2133MHz
ECC memory and independent NVIDIA GeForce® GTX1050 Ti/GTX1050
graphics engine supporting innovative NVIDIA Pascal™ architecture, Vecow
ECS GTX1050 series system delivers up to 23% system performance improved
than the one without an independent CUDA graphics engine. Advanced Intel

®

HD Graphics P530/530 and independent NVIDIA GeForce® GTX1050 graphics
engine supporting DirectX 12.1, OpenGL 4.5 and OpenCL 2.0 API, featuring
multiple VGA, DVI, DisplayPort and HDMI display interfaces, up to 8K resolution
and 6 independent HD displays, Vecow ECS GTX1050 series system offers
more than 655% improved graphics performance than the one without an
independent graphics engine; Multiple SATA III (6Gbps), USB 3.0 (5Gbps), PoE
(1Gbps) LAN and WiFi/4G/3G/LTE/GPRS/UMTS wireless connections make
high-speed data conveying possible. Vecow ECS-9700/9600 GTX1050 Series
Embedded System delivers you outstanding system and excellent graphics
performance for mission critical embedded computing applications.

Armed with 7 display interfaces supporting 6 independent HD displays and up to
8K displays, 6 GigE LAN ports with 4 IEEE 802.3at (25.5W/48V) PoE

+

without
additional power connections, 2 Front-access 2.5” SSD/HDD trays, 4 SIM card
sockets (3 front-access, 1 internal) for 3G/4G/LTE/WiFi/GPRS/UMTS, 1 Front­access CFast socket, 4 SATA III support software RAID 0, 1, 5, 10 functions,
6 external USB 3.0, 4 COM RS-232/422/485, 4 Mini PCIe sockets, 32 Isolated
DIO, 10V to 36V wide range power input with 80V surge protection, congurable
ignition power control, smart remote management features, remote power
switch, EN50155 and EN50121-3-2 compliant, optional supports full function
SUMIT A, B; Vecow ECS-9700/9600 GTX1050 Series Embedded System is
capable of providing diversied embedded applications.

Gathering leading integration, outstanding system performance, excellent
graphics performance, smart manageability, mobile availability and industrial­grade reliability, Vecow ECS-9700/9600 GTX1050 Series GPU Computing
System is your great choices for Machine Vision, Automated Guided Vehicle
(AGV), Embedded Workstation, Traffic Vision, Telemedicine, Deep Learning,
Artificial Intelligence and any performance-driven real-time intelligent
applications.

1.1 Overview

2

GENERAL INTRODUCTION

©Vecow ECS-9700/ 9600 GTX1050 User Manual

1.2 Features

• Quad Core Intel® Xeon®/Core™ i7 Processor (Skylake-H) with CM236 Chipset

supports up to 6 independent displays

• NVIDIA GeForce

®

GTX 10 Series graphics engine supports NVIDIA Pascal™

GPU architecture, up to 8K resolution

• Multiple VGA, DVI, DisplayPort and HDMI display interfaces, up to 6

independent HD displays

• 2 DDR4 2133MHz Memory, up to 32GB (ECC/Non-ECC)

• 6 Independent GigE LAN with 4 IEEE 802.3at PoE

+

, iAMT 11.0 supported

• 4 SIM Card Socket for WiFi/3G/4G/LTE/GPRS/UMTS

• 2 Front-access 2.5" SSD Tray, 6 USB 3.0, 4 COM, 1 CFast Socket

• 32 Isolated DIO, 4 Mini PCIe/mSATA

• 10V to 36V DC power input with 80V Surge Protection

• Configurable Ignition Power Control, Smart Battery Protection

• Optional supports full function SUMIT A, B

1.3 Product Specication

1.3.1 Specications of ECS-9740 GTX1050

System

Processor Quad Core Intel® Xeon® E3-1505M v5/Core™ i7-6820EQ

Processor (Skylake-H)

Chipset Intel

®

CM236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket (ECC/Non-ECC)

I/O Interface

Serial 4 COM RS-232/422/485 w/auto flow control (ESD 8KV)

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 32 Isolated DIO (16 DI, 16 DO)

LED Power, HDD, Wireless, PoE

SIM Card 4 SIM Card Socket (3 External, 1 Internal)

3

GENERAL INTRODUCTION

Expansion

Mini PCIe 4 Mini PCIe Socket :

• 3 Full-size for PCIe/USB/External SIM Card/mSATA

• 1 Full-size for PCIe/Internal SIM Card/mSATA

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor • Intel® HD Graphics P530/530

• NVIDIA® GeForce® GTX1050 Ti/GTX1050

Interface 7 Display interfaces :

• 2 DVI : Up to 1920 x1200 @ 60Hz

• 1 DisplayPort : Up to 7680 x 3840 @ 60Hz

• 2 DisplayPort : Up to 4096 x 2304 @ 60Hz

• 1 VGA : Up to 1920 x 1200 @ 60Hz

• 1 HDMI : Up to 4096 x 2160 @ 60Hz

Storage

SATA 4 SATA III support software RAID 0, 1, 5, 10 :

• 3 SATA III (6Gbps)

• 1 SATA III co-lay with Mini PCIe (6Gbps)

mSATA 4 mSATA connection :

• 3 SATA III (Mini PCIe Type, 6Gbps)

• 1 SATA III co-lay with SATA (Mini PCIe Type, 6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/ HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219 GigE LAN supports iAMT 11.0

LAN 2 Intel

®

I210 GigE LAN

PoE

LAN 3 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210

LAN 4 GigE IEEE 802.3at (25.5W/48V) PoE

+

by Intel® I210

LAN 5 GigE IEEE 802.3at (25.5W/48V) PoE

+

by Intel® I210

LAN 6 GigE IEEE 802.3at (25.5W/48V) PoE

+

by Intel® I210

Power

Input Voltage 10V to 36V, DC-in

Power Interface 3-pin Terminal Block : V+, V-, Frame Ground

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

4

GENERAL INTRODUCTION

©Vecow ECS-9700/ 9600 GTX1050 User Manual

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 215mm x 79mm (10.2" x 8.5" x 3.1")

Weight 4.3 kg (9.48 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature -20°C to 60°C (-4°F to 140°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 60°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

1.3.2 Specications of ECS-9600 GTX1050

System

Processor Quad Core Intel® Xeon® E3-1505M v5/Core™ i7-6820EQ

Processor (Skylake-H)

Chipset Intel

®

CM236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket (ECC/Non-ECC)

5

GENERAL INTRODUCTION

I/O Interface

Serial 4 COM RS-232/422/485 w/auto flow control (ESD 8KV)

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 4 SIM Card Socket (3 External, 1 Internal)

Expansion

Mini PCIe 4 Mini PCIe Socket :

• 3 Full-size for PCIe/USB/External SIM Card/mSATA

• 1 Full-size for PCIe/Internal SIM Card/mSATA

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor • Intel® HD Graphics P530/530

• NVIDIA® GeForce® GTX1050 Ti/GTX1050

Interface 7 Display interfaces :

• 2 DVI : Up to 1920 x1200 @ 60Hz

• 1 DisplayPort : Up to 7680 x 3840 @ 60Hz

• 2 DisplayPort : Up to 4096 x 2304 @ 60Hz

• 1 VGA : Up to 1920 x 1200 @ 60Hz

• 1 HDMI : Up to 4096 x 2160 @ 60Hz

Storage

SATA 4 SATA III support software RAID 0, 1, 5, 10 :

• 3 SATA III (6Gbps)

• 1 SATA III co-lay with Mini PCIe (6Gbps)

mSATA 4 mSATA connection :

• 3 SATA III (Mini PCIe Type, 6Gbps)

• 1 SATA III co-lay with SATA (Mini PCIe Type, 6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

®

I210 GigE LAN

6

GENERAL INTRODUCTION

©Vecow ECS-9700/ 9600 GTX1050 User Manual

Power

Input Voltage 10V to 36V, DC-in

Power Interface 3-pin Terminal Block : V+, V-, Frame Ground

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 215mm x 79mm (10.2" x 8.5" x 3.1")

Weight 4.3 kg (9.48 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature -20°C to 60°C (-4°F to 140°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% humidity, non-condensing

Relative Humidity 95% at 60°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

7

GENERAL INTRODUCTION

1.4 Supported CPU List

Processor No. TDP Cache Max. Frequency Embedded

Xeon

®

E3-1575M v5 45W 8M Up to 3.00 GHz

Xeon

®

E3-1545M v5 45W 8M Up to 2.90 GHz

Xeon

®

E3-1535M v5 45W 8M Up to 2.80 GHz

Xeon

®

E3-1515M v5 45W 8M Up to 2.80 GHz

Xeon

®

E3-1505M v5 45W 8M Up to 2.80 GHz Yes

Xeon

®

E3-1505L v5 25W 8M Up to 2.00 GHz

Core i7-6970HQ 45W 8M Up to 3.70 GHz

Core i7-6920HQ 45W 8M Up to 3.80 GHz

Core i7-6870HQ 45W 8M Up to 3.60 GHz

Core i7-6820HQ 45W 8M Up to 3.60 GHz

Core i7-6770HQ 45W 6M Up to 3.50 GHz

Core i7-6700HQ 45W 6M Up to 3.50 GHz

Core i7-6820EQ 45W 8M Up to 3.50 GHz Ye s

Core i7-6822EQ 25W 8M Up to 2.80 GHz

8

GENERAL INTRODUCTION

©Vecow ECS-9700/ 9600 GTX1050 User Manual

1.5 Mechanical Dimension

1.5.1 Dimensions of ECS-9740 GTX1050

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

155.0 (6.10”)

215.0 (8.46”)

79.1 (3.11”)

99.1 (3.90”)

Unit: mm (inch)

1.5.2 Dimensions of ECS-9600 GTX1050

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

155.0 (6.10”)

215.0 (8.46”)

79.1 (3.11”)

99.1 (3.90”)

Unit: mm (inch)

9

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

2

GETTING TO KNOW YOUR ECS-9700/9600 GTX1050

2.1 Packing List

Item Description Qty

1 ECS-9740/9600 GTX1050 Embedded System (According to the

conguration you order, the ECS-9740/9600 GTX1050 series
may contain SSD/HDD and DDR4 SO-DIMM. Please verify
these items if necessary.)

1

2 ECS-9740 GTX1050 Accessory box, which contains

● Vecow Drivers & Utilities DVD

● Wall-mounting bracket

● KHS#6-32x6 screw for wall-mounting bracket

● M2.5x6 screw for Mini PCIe Slot

● Din-Rail-PH-M4x16.5-S Ni

● 3-pin pluggable terminal block

● 20-pin pluggable terminal block

● Foot Pad

● F-M3x4 for SSD/HDD screws

1
2
4
4
4
2
2
4
4

3 ECS-9600 GTX1050 Accessory box, which contains

● Vecow Drivers & Utilities DVD

● Wall-mounting bracket

● KHS#6-32x6 screw for wall-mounting bracket

● M2.5x6 screw for Mini PCIe Slot

● Din-Rail-PH-M4x16.5-S Ni

● 3-pin pluggable terminal block

● 20-pin pluggable terminal block

● Foot Pad

● F-M3x4 for SSD/HDD screws

1
2
4
4
4
2
1
4
4

10

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

2.2 Front Panel I/O & Functions

In Vecow ECS-9700/9600 GTX1050 series family, all I/O connectors are
located on the front panel and the rear panel. Most of the general connections
to computer device, such as USB, LAN Jack, Audio, VGA, Display, DVI-D and
other additional storage, are placed on the front panel.

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

2.2.1 Power Button

The Power Button is a non-latched switch with dual color LED indications. It
indicates power status: S0, S3 and S5. More detail LED indications are listed as
follows:

To power on ECS-9700/9600 GTX1050, please press the power button and then
the blue LED is lightened. To power off the system, you can either command
shutdown by OS operation, or just simply press the power button.

If system error, you can just press the power button for 4 seconds to shut down
the machine directly. Please do note that a 4-second interval between each
2 power-on/ power-off operation is necessary in normal working status. (For
example, once turning off ECS-9700/9600 GTX1050, you have to wait for 4
seconds to initiate another power-on operation.)

LED Color Power Status System Status

Solid Blue S0 System working

Solid Orange S3, S5 Suspend to RAM, System off with standby power

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

11

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

Pin No. Description Pin No. Description

S1 GND PC6 NC

S2 SATA_TXP5 PC7 GND

S3 SATA_TXN5 PC8 CFAST_LED

S4 GND PC9 NC

S5 SATA_RXN5 PC10 NC

S6 SATA_RXP5 PC11 NC

S7 GND PC12 NC

2.2.3 CFast Card

There is a CFast socket on the front panel supporting Type-I/II Compact
Flash card. It is implemented by a SATA III Port from CM236 PCH. Be sure
to disconnect the power source and unscrew the CFast socket cover before
installing a CFast card. The ECS-9700/9600 GTX1050 does not support the
CFast hot swap and PnP (Plug and Play) functions. It is necessary to remove
power source rst before inserting or removing the CFast card.

The pinouts of CFast port are listed as follows:

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

2.2.2 Reset Tact Switch

It is a hardware reset switch. Please use this switch to reset ECS-9700/9600
GTX1050 without power off. Press the Reset Switch for a few seconds, and
then reset will be enabled.

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

12

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

Pin No. Description Pin No. Description

PC1 GND PC13 +3.3V

PC2 GND PC14 +3.3V

PC3 NC PC15 GND

PC4 NC PC16 GND

PC5 NC PC17 NC

2.2.4 PWR and HDD LED Indicator

HDD LED/Yellow : A Hard Disk/ CFast LED. If the LED is on, it indicates that
ECS-9700/9600 GTX1050 storage is functional. If it is off, it indicates that
the system’s storage is not functional. If it is ashing, it indicates data access
activities.
Power LED/Green : If the LED is solid green, it indicates that ECS-9700/9600
GTX1050 is powered on.

LED Color Power Status System Status

Yellow HDD/CFast

• On/ Off : Storage status, function or not.

• Twinkling : Data transferring.

Green Power System power status (on/off)

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

2.2.5 DVI-D Connector

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

13

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

The DVI-D connector on the front panel supports DVI display. This connector
can output DVI signal. The DVI output mode supports up to 1920 x 1200
resolution and the DVI is automatically selected according to the display device
connected. You will need a DVI-D cable when connecting to a display device.

2.2.7 DisplayPort

Onboard Display Port supports auxiliary channel dual mode and the connection
supports up to 4096 x 2304 resolution at 60 Hz.
Multi-Stream Transport Display Resolutions Table as follows:

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

Multi-Stream Transport Display Max. Resolution

One panel Display 4096x2304@60Hz

Two panel Displays concurrently 2880x1800@60Hz

Three panel Displays concurrently 2304x1440@60Hz

2.2.6 VGA Connector

The VGA connector on the front panel supports VGA display. This VGA
connector comes from eDP and the VGA output mode supports up to 1920 x
1200 resolution.
Remark: This VGA connector does not support Hot Plug function. If you would
like to use the VGA connector, please remain the connection of VGA Display.

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

14

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

2.2.8 3 of 4 Independent Displays

You could have 3 independent displays as your wish from these 4 display ports.
Also, you could have two 4K resolution displays, the 2 DisplayPort, from these 4
ports.

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

2.2.10 Ethernet Port

There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel I219 Ethernet Phy and
LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

2.2.9 USB 3.0

There are 4 USB 3.0 connections available supporting up to 5GB per second
data rate in the front side of ECS-9700/9600 GTX1050. It is also compliant with
the requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and
Low Speed (LS).

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

15

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

2.2.11 Audio Jack

There are 2 audio connectors, Mic-in and Line-out, in the front side of ECS-9700
/9600 GTX1050. Onboard Realtek ALC892 audio codec supports 5.1
channel HD audio and fully complies with Intel® High Denition Audio (Azalia)
specications.

To utilize the audio function in Windows platform, you need to install
corresponding drivers for both Intel CM236 chipset and Realtek ALC892 codec.

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network, and it lightens
in solid orange when the cable is properly connected to a 1000Mbps Ethernet
network. The left LED will keep twinkling/off when Ethernet data packets are
being transmitted or received.

1 8

10Mbps 100Mbps 1000Mbps

Right

Bottom Led

Off

Solid

Green

Solid

Orange

Left

Bottom Led

Flash

Yellow

Flash

Yellow

Flash

Yellow

Pin No. 10/ 100Mbps 1000Mbps

1 E_TX+ MDI0_P

2 E_TX- MDI0_N

3 E_RX+ MDI1_P

4 ---- MDI2_P

Pin No. 10/ 100Mbps 1000Mbps

5 ----- MDI2_N

6 E_RX- MDI1_N

7 ----- MDI3_P

8 ------ MDI3_N

2 work in normal status, iAMT 11.0 function is enabled. When using suitable
RJ-45 cable, you can connect the system to other computers or to any other
devices with Ethernet connection; for example, a hub or a switch. Moreover,
both of LAN 1 and LAN 2 support Wake on LAN and Pre-boot functions. The
pin-outs of LAN 1 and LAN 2 are listed as follows:

16

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

2.2.12 WLAN LED, Mini PCIe, SIM Card Comparison

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

Mini PCIe SIM LED

Mini PCIe 1 / mSATA (CN12) SIM 1 (CN13) 1

Mini PCIe 2 / mSATA (CN8) SIM 2 (CN9) 2

Mini PCIe 3 / mSATA (CN10) SIM 3 (CN11) 3

Mini PCIe 4 / mSATA (CN6) SIM 4 (CN7) 4

Mini PCIe Slot/SIM Slot/WLAN LED Mapping Table :

Mini PCIe 3

CN10

Mini PCIe 2

CN8

Mini PCIe 1

CN12

Mini PCIe 4

CN6

SIM2

CN9

SW2

Note:
A. The SIM card sockets do not support hot-plug. Please make sure to unplug
the system power before inserting the SIM card(s).
SW2: Mini PCIe 1to 4; PCIe & mSATA Select SW

B.

Mini PCIe 4 only support PCIe interface SIM card module.

DIP Switch Interface

SW2-1

Mini PCIe 1

ON Mini PCIe

OFF Auto Detection

(Default)

SW2-2

Mini PCIe 2

ON Mini PCIe

OFF Auto Detection

(Default)

DIP Switch Interface

SW2-3

Mini PCIe 3

ON Mini PCIe

OFF Auto Detection

(Default)

SW2-4

Mini PCIe 4

ON Mini PCIe

OFF Auto Detection

(Default)

SIM4

CN6

17

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

HDD Tray MB Connector MB Power Connector

HDD 1 SATA1 Power Conn 1

HDD 2 SATA2 Power Conn 1

SATA3 Power Conn 2

SATA4

(Remark: By MB BOM Optional,

Default no signal link)

Power Conn 2

2.2.13 SSD/HDD Tray

There are 2 front-access 2.5’’ SSD/HDD trays in the front side of ECS-9700/9600
GTX1050. Just trigger to open the SSD/HDD tray, up to 8TB is available.

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

HDD 1

HDD 2

SATA3 SATA1

SATA4 SATA2

SATA Power Conn1

SATA Power Conn2

2.2.14 System FAN

There is a system FAN on front side for airow direction outward. You can adjust
the FAN Speed from Vecow BIOS Setting. (refer to 4.3.7_Hardware Monitor_FAN
PWM Value)

RST

DP LAN 1

LAN 2

DVI-D

VGA

CFast

SIM 1 SIM 3

SIM 2

1 2 3 4

WLAN

18

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

2.3 Rear Panel I/O & Functions

2.3.1 Power Terminal Block

It is a 5-pin power-on or power-off switch through Phoenix Contact terminal
block. You could turn on or off the system power by using this contact. This
terminal block supports dual function of soft power-on/ power-off (instant off or
delay 4 second), and suspend mode.

Pin No. Denition Pin No. Denition

1 Ignition 2 External Power Button V+

3 External Power Button V-

This system supports 10V to 36V DC power input by terminal block in the rear
side. In normal power operation, power LED lightens in solid green and supports
up to 80V surge protection.

COM 2

COM 1

COM 3COM 4

V+ V

-

On | Off

DC-IN

IGN

LAN6

PoE

LAN5

PoE

LAN4

PoE

LAN3

PoE

Isolated

DIO 2

Isolated

DIO 1

DVI

DP

HDMI

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

Pin No. Denition Pin No. Denition

1 V+ 2 V-

3 Chassis Ground

2.3.2 Remote Power On/O Switch & Ignition

COM 2

COM 1

COM 3COM 4

V+ V

-

On | Off

DC-IN

IGN

LAN6

PoE

LAN5

PoE

LAN4

PoE

LAN3

PoE

Isolated

DIO 2

Isolated

DIO 1

DVI

DP

HDMI

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

19

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

Serial

Port

Pin No. RS-232 RS-422

(5-wire)

RS-422
(9-wire)

RS-485
(3-wire)

1 to 4

1 DCD TXD- TXD- DATA -

2 RXD TXD+ TXD+ D ATA+

3 TXD RXD+ RXD+ -----------

4 DTR RXD- RXD- -----------

5 GND GND GND GND

6 DSR ----------- RTS- -----------

7 RTS ----------- RTS+ -----------

8 CTS ----------- CTS+ -----------

9 RI ----------- CTS- -----------

The pin assignments are listed in the table as below:

BIOS Setting Function

COM 1

COM 2

COM 3

COM 4

RS-232

RS-422 (5-wire)

RS-422 (9-wire)

RS-485

RS-485 w/z auto-ow control

2.3.3 COM Ports

Serial port 1 to 4 (COM 1 to 4) can be congured for RS-232, RS-422, or RS­485 with auto ow control communication. The default denition of COM 1 and
COM 2 is RS-232. If you want to change to RS-422 or RS-485, you can nd the
setting in BIOS.

COM 2

COM 1

COM 3COM 4

V+ V

-

On | Off

DC-IN

IGN

LAN6

PoE

LAN5

PoE

LAN4

PoE

LAN3

PoE

Isolated

DIO 2

Isolated

DIO 1

DVI

DP

HDMI

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

20

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

COM3 & COM 4 MB connector table:

COM Port MB Connector COM Port MB Connector

COM 3 CN27 COM 4 CN28

CN Pin No. Signal Name

CN27(COM3)

CN28(COM4)

1 Chassis GND

2 GND

3 RI

4 DTR

5 CTS

6 TXD

7 RTS

8 RXD

9 DSR

10 DCD

COM 3 & COM 4 MB connector pin out:

CN27

COM3

CN28

COM4

21

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

2.3.5 PoE (Power over Ethernet) Ports

There are quad 8-pin PoE RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. Powered by Intel I210 Ethernet engine. When both
LAN 1 and LAN 2 work in normal status, iAMT 11.0 function is enabled. Each
PoE supports 30.4W

When using suitable RJ-45 cable, you can connect the system to a computer,
or to any other devices with Ethernet connection; for example, a hub or a
switch. Moreover, both of LAN 1 and LAN 2 support Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2 are listed as follows:

COM 2

COM 1

COM 3COM 4

V+ V

-

On | Off

DC-IN

IGN

LAN6

PoE

LAN5

PoE

LAN4

PoE

LAN3

PoE

Isolated

DIO 2

Isolated

DIO 1

DVI

DP

HDMI

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

Pin No. 10/ 100 Mbps 1000 Mbps PoE

1 E_TX+ MDI0_P PoE+

2 E_TX- MDI0_N PoE+

3 E_RX+ MDI1_P PoE-

4 ---- MDI2_P ----

5 ----- MDI2_N ----

6 E_RX- MDI1_N PoE-

7 ----- MDI3_P ----

8 ------ MDI3_N ----

2.3.4 Rear USB 3.0

There are 2 USB 3.0 connections available supporting up to 5GB per second
data rate in the front side of ECS-9700/9600 GTX1050. It is also compliant with
the requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and
Low Speed (LS).

COM 2

COM 1

COM 3COM 4

V+ V

-

On | Off

DC-IN

IGN

LAN6

PoE

LAN5

PoE

LAN4

PoE

LAN3

PoE

Isolated

DIO 2

Isolated

DIO 1

DVI

DP

HDMI

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

22

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050©Vecow ECS-9700/ 9600 GTX1050 User Manual

Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection & PoE status LED.

The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network, and it lightens in
solid orange when the cable is properly connected to a 1000 Mbps Ethernet
network. The left LED will keep twinkling/off when Ethernet data packets are
being transmitted/received.

1 8

LED Status 10Mbps 100Mbps 1000Mbps

Right

Bottom Led

Off

Solid

Green

Solid

Orange

Left

Bottom Led

Flash

Yellow

Flash

Yellow

Flash

Yellow

LED Location LED Color Status

LAN3 Green

Green Light: PD installed & powered green

Off: Non PD

LAN4 Green

Green Light: PD installed & powered green

Off: Non PD

LAN5 Green

Green Light: PD installed & powered green

Off: Non PD

LAN6 Green

Green Light: PD installed & powered green

Off: Non PD

PoE LED indicator:

23

GETTING TO KNOW YOUR ECS-9700/ 9600 GTX1050

2.3.6 Isolated DIO

COM 2

COM 1

COM 3COM 4

V+ V

-

On | Off

DC-IN

IGN

LAN6

PoE

LAN5

PoE

LAN4

PoE

LAN3

PoE

Isolated

DIO 2

Isolated

DIO 1

DVI

DP

HDMI

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

There is a 32-bit (16-bit DI, 16-bit DO) with 2 DIO connectors in the rear side.
DI/DIO supports NPN(sink) and PNP(Source) mode, and each DI channel is
equipped with a photocouper for isolated protection. Each DO with isolator chip
is congured by a Jumper for each DIO connector.
DO Safety-Related Certications:

• 4242-VPK Basic Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1

• 3-KVRMS Isolation for 1 minute per UL 1577

• CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment Standards

• GB4943.1-2011 CQC Certied

Isolated

DIO

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

DIO Pin No. Denition Function

DIO1

1 INPUT 0 SIO_GPI80

2 INPUT 1 SIO_GPI81

3 INPUT 2 SIO_GPI82

4 INPUT 3 SIO_GPI83

5 INPUT 4 SIO_GPI84

6 INPUT 5 SIO_GPI85

7 INPUT 6 SIO_GPI86

8 INPUT 7 SIO_GPI87

9 DI1_COM -

10 DIO1_GND -

11 OUTPUT 0 SIO_GPO70

12 OUTPUT 1 SIO_GPO71

13 OUTPUT 2 SIO_GPO72

14 OUTPUT 3 SIO_GPO73

15 OUTPUT 4 SIO_GPO74

16 OUTPUT 5 SIO_GPO75

17 OUTPUT 6 SIO_GPO76

18 OUTPUT 7 SIO_GPO77

19 DIO1_GND -

20 DIO1_VDC (6~48V Input) -

DIO Connectors pin out: