Vecow ECS-9240-GTX1050T, ECS-9100-GTX1050, ECS-9240-GTX1050, ECS-9100-GTX1050T User Manual
USER
Manual
USER
Manual
1.1.0 Edition 20171103
ECS-9200/9100 GTX1050
Quad Core Intel® Xeon®/ Core™ i7 Processor Embedded System
with Intel
®
C236 Chipset & NVIDIA GEFORCE® GTX 1050 Ti/1050 Graphics
High Performance, Independent Graphics, EN50155
ii
Version Date Page Description Remark
1.0 07/25/2017 All Ofcial Release
1.1 11/03/2017 46-66 Update
Record of Revision
iii
This manual is released by Vecow Co., Ltd. for reference purpose only. All
product offerings and specications are subject to change without prior notice.
It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable
for direct, indirect, special, incidental, or consequential damages arising out of
the use of the product or documentation or any infringements upon the rights of
third parties, which may result from such use.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if it is not installed and used
in accordance with the instruction manual, it may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC
The products described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to
remain CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
CE
This document contains proprietary information protected by copyright. No part
of this publication may be reproduced in any form or by any means, electric,
photocopying, recording or otherwise, without prior written authorization
by Vecow Co., Ltd. The rights of all the brand names, product names, and
trademarks belong to their respective owners.
Disclaimer
Declaration of Conformity
Copyright and Trademarks
iv
Part Number Description
ECS-9240-
GTX1050T
ECS-9200, NVIDIA GeForce
®
GTX 1050 Ti, 6 GigE LAN w/4
PoE
+
, 2 SSD Tray, 8 USB 3.0, 4 COM, 1 M.2, 1 M2DOM, 3 SIM,
32 Isolated DIO
ECS-9240-
GTX1050
ECS-9200, NVIDIA GeForce
®
GTX 1050, 6 GigE LAN w/4 PoE+,
2 SSD Tray, 8 USB 3.0, 4 COM, 1 M.2, 1 M2DOM, 3 SIM,
32 Isolated DIO
ECS-9100-
GTX1050T
ECS-9100, NVIDIA GeForce
®
GTX 1050 Ti, 2 GigE LAN, 2 SSD
Tray, 8 USB 3.0, 4 COM, 1 M.2, 1 M2DOM, 3 SIM, 16 GPIO
ECS-9100-
GTX1050
ECS-9100, NVIDIA GeForce
®
GTX 1050, 2 GigE LAN, 2 SSD
Tray, 8 USB 3.0, 4 COM, 1 M.2, 1 M2DOM, 3 SIM, 16 GPIO
Order Information
v
Part Number Description
E3-1275 v6 7th Generation Intel® Xeon® E3-1275 v6 Processor
(8M Cache, up to 4.20 GHz, 80W)
E3-1275 v5 6th Generation Intel
®
Xeon® E3-1275 v5 Processor
(8M Cache, up to 4.00 GHz, 80W)
E3-1225 v5 6th Generation Intel
®
Xeon® E3-1225 v5 Processor
(6M Cache, up to 3.70 GHz, 80W)
E3-1268L v5 6th Generation Intel
®
Xeon® E3-1268L v5 Processor
(8M Cache, up to 3.40 GHz, 35W)
i7-7700 7th Generation Intel
®
Core™ i7-7700 Processor
(8M Cache, up to 4.20 GHz, 65W)
i7-7700T 7th Generation Intel
®
Core™ i7-7700T Processor
(8M Cache, up to 3.80 GHz, 35W)
i7-6700 6th Generation Intel
®
Core™ i7-6700 Processor
(8M Cache, up to 4.00 GHz)
i7-6700TE 6th Generation Intel
®
Core™ i7-6700TE Processor
(8M Cache, up to 3.40 GHz)
DDR4 16G
Certied DDR4 16GB 2133MHz RAM
DDR4 8G
Certied DDR4 8GB 2133MHz RAM
DDR4 4G
Certied DDR4 4GB 2133MHz RAM
PWA-280WB-WT 280W, 24V, 85V AC to 264V AC Power Adapter with 3-pin
Terminal Block (7.62mm pitch), Wide Temperature -30°C to
+70°C
PWA-160WB-WT 160W, 24V, 85V AC to 264V AC Power Adapter with 3-pin
Terminal Block (7.62mm pitch), Wide Temperature -30°C to
+70°C
VESA Mount
VESA Mounting Kit
DIN-RAIL
DIN Rail Kit
Rack Mount
2U Rackmount Kit
TMK2-20P-100
Terminal Block 20-pin to Terminal Block 20-pin Cable, 100cm
TMK2-20P-500
Terminal Block 20-pin to Terminal Block 20-pin Cable, 500cm
TMB-TMBK-20P Terminal Board with One 20-pin Terminal Block Connector
and DIN-Rail Mounting
3G Module
Mini PCIe 3G/GPS Module with Antenna
4G Module
Mini PCIe 4G/GPS Module with Antenna
WiFi & Bluetooth
Module
Mini PCIe WiFi & Bluetooth Module with Antenna
Order Accessories
vi
Table of Contents
CHAPTER 1 GENERAL INTRODUCTION 1
1.1 Overview 1
1.2 Features 2
1.3 Product Specication 2
1.3.1 Specications of ECS-9240 GTX1050 2
1.3.2 Specications of ECS-9100 GTX1050 5
1.4 Supported CPU List 7
1.5 Mechanical Dimension 8
1.5.1 Dimensions of ECS-9240 GTX1050 8
1.5.2 Dimensions of ECS-9100 GTX1050 8
CHAPTER 2 GETTING TO KNOW YOUR
ECS-9200/9100 GTX1050 9
2.1 Packing List 9
2.2 Front Panel I/O & Functions 10
2.3 Rear Panel I/O & Functions 18
2.4 Main Board Expansion Connectors 26
2.5 Main Board Jumper & Deep Switch Settings 38
2.6 Ignition Control 42
CHAPTER 3 SYSTEM SETUP 46
3.1 How to Open Your ECS-9200/9100 GTX1050 46
3.2 Installing CPU 50
3.3 Installing DDR4 SO-DIMM Modules 53
3.4 Installing Mini PCIe Card 54
3.5 Installing CFast Card 55
3.6 Installing SIM Card 56
vii
3.7 Installing SSD/HDD 57
3.8 Installing M.2 59
3.9 Installing M2DOM 60
3.10 Mounting Your ECS-9200/9100 GTX1050 62
CHAPTER 4 BIOS SETUP 67
4.1 Entering BIOS SETUP 67
4.2 Main 68
4.3 Advanced 68
4.4 Chipset 77
4.5 Security 82
4.6 Boot 83
4.7 Save & Exit 84
APPENDIX A : Isolated DIO Guide 85
APPENDIX B : Software Functions 91
APPENDIX C : RAID Installation Guide 95
APPENDIX D : Power Consumption 99
APPENDIX E : Supported Memory & Storage List 101
APPENDIX F : Graphics Performance 104
1
GENERAL INTRODUCTION
1
GENERAL INTRODUCTION
1.1 Overview
Vecow ECS-9200/9100 GTX1050 series is a workstation-grade compact
integrated embedded system. Flexible LGA1151 Socket supports the workstationgrade Intel
®
Xeon®/Core™ i7 processor (Kaby Lake-S/Skylake-S) running with
advanced Intel
®
C236 chipset and dual-channel DDR4 2133MHz ECC memory, up
to 32GB capacity, independent NVIDIA GeForce
®
GTX 1050Ti/GTX 1050 graphics
engine computing with advanced NVIDIA Pascal™ architecture, ECS-9200/9100
GTX1050 delivers up to 28% system performance improved than the one without
an independent CUDA graphics engine; Advanced Intel® HD Graphics 630/530
and independent NVIDIA GeForce
®
GTX 1050 graphics engine supporting DirectX
12.1, OpenGL 4.5 and OpenCL 2.0 API, featuring multiple VGA, DVI-D, DVI-I,
DisplayPort and HDMI display interfaces, up to 8K resolution and 6 independent
HD displays, Vecow ECS-9200/9100 GTX1050 offers more than 400% improved
graphics performance than the one without an independent graphics engine;
Multiple SATA III (6Gbps), USB 3.0 (5Gbps), PoE (1Gbps) LAN and WiFi/4G/3G/
LTE/GPRS/UMTS wireless connections make high-speed data conveying possible.
Vecow ECS-9200/9100 GTX1050 Series GPU Computing System brings you
new generation workstation-grade system performance with enhanced power
productivity for demanding workloads in real-time embedded applications.
All-in-one integrated features, -20°C to 60°C operating temperature, 6 GigE LAN
ports with 4 IEEE 802.3at (25.5W/48V) PoE+ without additional power connections,
3 external SIM sockets for WiFi/3G/4G/LTE/GPRS/UMTS, 2 Front-access 2.5” SSD
trays, 1 Front-access CFast socket, 2 SATA III supports software RAID function, 8
external USB 3.0, 4 COM RS-232/422/485, M.2 expansion, M2DOM expansion,
3 Mini PCIe/mSATA sockets, 32 Isolated DIO for smart circuit protection, 10V to
36V wide range power input with 80V Surge protection, congurable ignition power
control, smart remote management features, remote power switch, EN50155 and
EN50121 compliant, Vecow ECS-9200/9100 GTX1050 Series GPU Computing
System features multiple I/O, all-in-one integrated functions and industrial-grade
reliability for any performance-driven real-time applications.
With workstation-grade system performance, leading integrated features, smart
manageability, outstanding mobile availability, secure power protection and rugged
reliability, Vecow ECS-9200/9100 GTX1050 Series GPU Computing System is
your great choices for Machine Vision, Embedded Workstation, Vehicle Computing,
Mobile DVR/NVR, Deep Learning, Articial Intelligence and any Industry 4.0/IIoT
graphics performance-driven real-time embedded computing applications.
2
GENERAL INTRODUCTION
©Vecow ECS-9200/9100 GTX1050 User Manual
1.2 Features
• LGA 1151 Socket supports workstation-grade Intel® Xeon®/Core™ i7 Processor
(Kaby Lake/Skylake) with C236 chipset
• NVIDIA GeForce
®
GTX 1050 Graphics engine supports NVIDIA Pascal™ GPU
architecture, up to 8K resolution
• Multiple DVI-D, DVI-I, DisplayPort and HDMI display interfaces, up to
6 independent HD displays
• 2 DDR4 2133MHz Memory, up to 32GB (ECC/Non-ECC)
• 6 Independent GigE LAN with 4 IEEE 802.3at PoE+, iAMT 11.0 supported
• 3 SIM Card Socket for 3G/4G/LTE/WiFi/GPRS/UMTS
• Storage : 2 2.5" SSD Tray, 1 CFast, 1 M2DOM, 2 SATA III
• Expansion : 1 M.2 Socket, 3 Mini PCIe/mSATA
• 8 External USB 3.0, 4 COM
• 32 Isolated DIO, 3 Mini PCIe/mSATA
• 10V to 36V DC power input with 80V Surge Protection
• Configurable Ignition Power Control
• -20°C to 60°C Operating Temperature
1.3 Product Specication
1.3.1 Specications of ECS-9240 GTX1050
System
Processor Quad Core 7th/6th Generation Intel® Xeon®/Core™ i7
Processor (Kaby Lake-S/Skylake-S)
Chipset Intel
®
C236
BIOS AMI
SIO IT8786E
Memory • DDR4 2133MHz
• Up to 32GB
• 2 260-pin SO-DIMM Socket (ECC/Non-ECC)
I/O Interface
Serial 4 COM RS-232/422/485 w/auto flow control (ESD 8KV)
USB • 8 USB 3.0 (External)
• 1 USB 2.0 (Internal)
Isolated DIO 32 Isolated DIO (16 DI, 16 DO)
LED Power, HDD, Wireless, PoE
SIM Card 3 External SIM Card Socket
3
GENERAL INTRODUCTION
Expansion
Mini PCIe 3 Full-size for PCIe/USB/External SIM Card/mSATA
M.2 1 M.2 Socket (Key ID : M)
Graphics
Processor • Intel® HD Graphics 630/530
• NVIDIA® GeForce® GTX 1050 Ti/GTX 1050
Interface 6 Display interfaces :
• 3 DVI : Up to 1920 x1200 @ 60 Hz
• 1 DisplayPort : Up to 7680 x 3840 @ 60Hz
• 1 DisplayPort : Up to 4096 x 2304 @ 60Hz
• 1 HDMI : Up to 4096 × 2160 @ 60Hz
Storage
SATA 2 SATA III support software RAID 0, 1
mSATA 3 SATA III (Mini PCIe Type, 6Gbps)
M2DOM 1 PCIe 3.0 (8GT/s)
Storage Device • 1 CFast Socket, Push-in/Push-out Ejector
• 2 Front-access 2.5" SSD/HDD Tray
Audio
Audio Codec Realtek ALC892, 5.1 Channel HD Audio
Audio Interface 1 Mic-in, 1 Line-out
Ethernet
LAN 1 Intel® I219 GigE LAN supports iAMT 11.0
LAN 2 Intel
®
I210 GigE LAN
PoE (ECS-9200)
LAN 3 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210
LAN 4 GigE IEEE 802.3at (25.5W/48V) PoE
+
by Intel® I210
LAN 5 GigE IEEE 802.3at (25.5W/48V) PoE
+
by Intel® I210
LAN 6 GigE IEEE 802.3at (25.5W/48V) PoE
+
by Intel® I210
Power
Input Voltage 10V to 36V, DC-in
Power Interface 3-pin Terminal Block : V+, V-, Frame Ground
Ignition Control 16 Mode (Internal)
Remote Switch 3-pin Terminal Block : On, Off, IGN
Surge Protection Up to 80V/1ms Transient Power
4
GENERAL INTRODUCTION
©Vecow ECS-9200/9100 GTX1050 User Manual
Others
TPM Optional Inneon SLB9665 supports TPM 2.0, LPC
interface
Watchdog Timer Reset : 1 to 255 sec./min. per step
Smart Management Wake on LAN, PXE supported
HW Monitor Monitoring temperature, voltages. Auto throttling control
when CPU overheats.
Software Support
OS Windows 10, Windows 8.1, Windows 7, Linux
Mechanical
Dimensions (WxDxH) 260mm x 215mm x 79mm (10.2" x 8.5" x 3.1")
Weight 4.3 kg (9.48 lb)
Mounting • Wallmount by mounting bracket
• DIN Rail Mount (Optional)
• 2U Rackmount (Optional)
Environment
Operating Temperature 35W TDP CPU :
Xeon
®
E3-1268L v5, Core™ i7 : -20°C to 60°C (-4°F to
140°F)
65W TDP CPU :
Core™ i7 : -20°C to 55°C (-4°F to 131°F)
80W TDP CPU :
Xeon
®
E3-1275 v6, E3-1275 v5, E3-1225 v5 : -20°C to
45°C (-4°F to 113°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Humidity 5% to 95% Humidity, non-condensing
Relative Humidity 95% at 60°C
Shock • IEC 60068-2-27
• SSD : 50G @ Wallmount, Half-sine, 11ms
Vibration • IEC 60068-2-64
• SSD : 5Grms, 5Hz to 500Hz, 3 Axis
EMC CE, FCC, EN50155, EN50121-3-2
5
GENERAL INTRODUCTION
1.3.2 Specications of ECS-9100 GTX1050
System
Processor Quad Core 7th/6th Generation Intel® Xeon®/Core™ i7
Processor (Kaby Lake-S/Skylake-S)
Chipset Intel
®
C236
BIOS AMI
SIO IT8786E
Memory • DDR4 2133MHz
• Up to 32GB
• 2 260-pin SO-DIMM Socket (ECC/Non-ECC)
I/O Interface
Serial 4 COM RS-232/422/485 w/auto flow control (ESD 8KV)
USB • 8 USB 3.0 (External)
• 1 USB 2.0 (Internal)
DIO 16 GPIO
LED Power, HDD, Wireless
SIM Card 3 External SIM Card Socket
Expansion
Mini PCIe 3 Full-size for PCIe/USB/External SIM Card/mSATA
M.2 1 M.2 Socket (Key ID : M)
Graphics
Processor • Intel® HD Graphics 630/530
• NVIDIA
®
GeForce® GTX 1050 Ti/GTX 1050
Interface 6 Display interfaces :
• 3 DVI : Up to 1920 x1200 @ 60 Hz
• 1 DisplayPort : Up to 7680 x 3840 @ 60Hz
• 1 DisplayPort : Up to 4096 x 2304 @ 60Hz
• 1 HDMI : Up to 4096 × 2160 @ 60Hz
Storage
SATA 2 SATA III support software RAID 0, 1
mSATA 3 SATA III (Mini PCIe Type, 6Gbps)
M2DOM 1 PCIe 3.0 (8GT/s)
Storage Device • 1 CFast Socket, Push-in/Push-out Ejector
• 2 Front-access 2.5" SSD/HDD Tray
Audio
Audio Codec Realtek ALC892, 5.1 Channel HD Audio
Audio Interface 1 Mic-in, 1 Line-out
Ethernet
6
GENERAL INTRODUCTION
©Vecow ECS-9200/9100 GTX1050 User Manual
LAN 1 Intel® I219 GigE LAN supports iAMT 11.0
LAN 2 Intel
®
I210 GigE LAN
Power
Input Voltage 10V to 36V, DC-in
Power Interface 3-pin Terminal Block : V+, V-, Frame Ground
Ignition Control 16 Mode (Internal)
Remote Switch 3-pin Terminal Block : On, Off, IGN
Surge Protection Up to 80V/1ms Transient Power
Others
TPM Optional Inneon SLB9665 supports TPM 2.0, LPC
interface
Watchdog Timer Reset : 1 to 255 sec./min. per step
Smart Management Wake on LAN, PXE supported
HW Monitor Monitoring temperature, voltages. Auto throttling control
when CPU overheats.
Software Support
OS Windows 10, Windows 8.1, Windows 7, Linux
Mechanical
Dimensions (WxDxH) 260mm x 215mm x 79mm (10.2" x 8.5" x 3.1")
Weight 4.3 kg (9.48 lb)
Mounting • Wallmount by mounting bracket
• DIN Rail Mount (Optional)
• 2U Rackmount (Optional)
Environment
Operating Temperature 35W TDP CPU :
Xeon® E3-1268L v5, Core™ i7 : -20°C to 60°C (-4°F to
140°F)
65W TDP CPU :
Core™ i7 : -20°C to 55°C (-4°F to 131°F)
80W TDP CPU :
Xeon® E3-1275 v6, E3-1275 v5, E3-1225 v5 : -20°C to
45°C (-4°F to 113°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Humidity 5% to 95% Humidity, non-condensing
Relative Humidity 95% at 60°C
Shock • IEC 60068-2-27
• SSD : 50G @ Wallmount, Half-sine, 11ms
7
GENERAL INTRODUCTION
1.4 Supported CPU List
Processor No. TDP Cache Max. Frequency Embedded
Xeon
®
E3-1575M v5 45W 8M Up to 3.00 GHz
Xeon
®
E3-1545M v5 45W 8M Up to 2.90 GHz
Xeon
®
E3-1535M v5 45W 8M Up to 2.80 GHz
Xeon
®
E3-1515M v5 45W 8M Up to 2.80 GHz
Xeon
®
E3-1505M v5 45W 8M Up to 2.80 GHz Yes
Xeon
®
E3-1505L v5 25W 8M Up to 2.00 GHz
Core i7-6970HQ 45W 8M Up to 3.70 GHz
Core i7-6920HQ 45W 8M Up to 3.80 GHz
Core i7-6870HQ 45W 8M Up to 3.60 GHz
Core i7-6820HQ 45W 8M Up to 3.60 GHz
Core i7-6770HQ 45W 6M Up to 3.50 GHz
Core i7-6700HQ 45W 6M Up to 3.50 GHz
Core i7-6820EQ 45W 8M Up to 3.50 GHz Ye s
Core i7-6822EQ 25W 8M Up to 2.80 GHz
Vibration • IEC 60068-2-64
• SSD : 5Grms, 5Hz to 500Hz, 3 Axis
EMC CE, FCC, EN50155, EN50121-3-2
8
GENERAL INTRODUCTION
©Vecow ECS-9200/9100 GTX1050 User Manual
1.5 Mechanical Dimension
1.5.1 Dimensions of ECS-9240 GTX1050
260.0 (10.24”)
282.0 (11.10”)
297.0 (11.69”)
155.0 (6.10”)
215.0 (8.46”)
79.1 (3.11”)
99.1 (3.90”)
Unit: mm (inch)
1.5.2 Dimensions of ECS-9100 GTX1050
260.0 (10.24”)
282.0 (11.10”)
297.0 (11.69”)
155.0 (6.10”)
215.0 (8.46”)
79.1 (3.11”)
99.1 (3.90”)
Unit: mm (inch)
9
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2.1 Packing List
Item Description Qty
1 ECS-9200/9100 GTX1050 Embedded System (According to the
conguration you order, ECS-9200/9100 GTX1050 series may
contain SSD/HDD and DDR4 SO-DIMM. Please verify these
items if necessary.)
1
2
ECS-9240 GTX1050 Accessory box, which contains
● Vecow Drivers & Utilities DVD
● Wall-mounting bracket
● KHS#6-32x6 screw for wall-mounting bracket
● M2.5x6 screw for Mini PCIe Slot
● Din-Rail-PH-M4x16.5-S Ni
● 3-pin pluggable terminal block
● 20-pin pluggable terminal block
● M3x6 screw for M.2
● Foot Pad
● F-M3x4 for SSD/HDD screws
1
2
4
3
4
2
2
1
4
4
3
ECS-9100 GTX1050 Accessory box, which contains
● Vecow Drivers & Utilities DVD
● Wall-mounting bracket
● KHS#6-32x6 screw for wall-mounting bracket
● M2.5x6 screw for Mini PCIe Slot
● Din-Rail-PH-M4x16.5-S Ni
● 3-pin pluggable terminal block
● 20-pin pluggable terminal block
● M3x6 screw for M.2
● Foot Pad
● F-M3x4 for SSD/HDD screws
1
2
4
3
4
2
1
1
4
4
10
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
2.2 Front Panel I/O & Functions
In Vecow ECS-9200/9100 GTX1050 series family, all I/O connectors are
located on the front panel and the rear panel. Most of the general connections
to computer device, such as USB, LAN Jack, Audio, Display Port, DVI-I, DVI-D
and other additional storage, are placed on the front panel.
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
2.2.1 Power Button
The Power Button is a non-latched switch with dual color LED indications. It
indicates power status: S0, S3 and S5. More detail LED indications are listed as
follows:
To power on the system, press the power button and then the blue LED is
lightened. To power off the system, you can either command shutdown by OS
operation, or just simply press the power button.
If system error, you can just press the power button for 4 seconds to shut down
the machine directly. Please do note that a 4-second interval between each
2 power-on/power-off operation is necessary in normal working status. (For
example, once turning off the system, you have to wait for 4 seconds to initiate
another power-on operation.)
LED Color Power Status System Status
Solid Blue S0 System working
Solid Orange S3, S5 Suspend to RAM, System off with standby power
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
11
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
Pin No. Description Pin No. Description
S1 GND PC6 NC
S2 SATA_TXP4 PC7 GND
S3 SATA_TXN4 PC8 CFAST_LED
S4 GND PC9 NC
S5 SATA_RXN4 PC10 NC
S6 SATA_RXP4 PC11 NC
S7 GND PC12 NC
2.2.3 CFast Card
There is a CFast socket on the front panel supporting Type-I/II Compact Flash
card. It is implemented by a SATA III Port from C236 PCH. Be sure to disconnect
the power source and unscrew the CFast socket cover before installing a CFast
card. ECS-9200/9100 GTX1050 does not support the CFast hot swap and PnP
(Plug and Play) functions. It is necessary to remove power source rst before
inserting or removing the CFast card.
The pinouts of CFast port are listed as follows:
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
2.2.2 Reset Tact Switch
It is a hardware reset switch. Use this switch to reset the system without power
off the system. Press the Reset Switch for a few seconds, and then reset will be
enabled.
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
12
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
Pin No. Description Pin No. Description
PC1 GND PC13 +3.3V
PC2 GND PC14 +3.3V
PC3 NC PC15 GND
PC4 NC PC16 GND
PC5 NC PC17 NC
2.2.4 PWR and HDD LED Indicator
HDD LED/Yellow : A Hard Disk/ CFast LED. If the LED is on, it indicates that the
system’s storage is functional. If it is off, it indicates that the system’s storage is
not functional. If it is ashing, it indicates data access activities.
Power LED/Green : If the LED is solid green, it indicates that the system is
powered on.
LED Color Power Status System Status
Yellow HDD/CFast
• On/Off : Storage status, function or not.
• Twinkling : Data transferring.
Green Power System power status (on/off)
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
2.2.5 DVI-D Connector
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
The DVI-D connector on the front panel supports DVI display. This connector
can output DVI signal. The DVI output mode supports up to 1920 x 1200
resolution and the DVI is automatically selected according to the display device
connected. You will need a DVI-D cable when connecting to a display device.
13
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2.2.7 DisplayPort
Onboard Display Port supports auxiliary channel dual mode and the connection
supports up to 4096 x 2304 resolution at 60 Hz.
Multi-Stream Transport Display Resolutions Table as follows:
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
2.2.6 DVI-I Connector
The DVI-I connector on the front panel supports both DVI and VGA display
modes. This connector can output DVI signals. The DVI output mode supports
up to 1920x1200 resolution. The DVI mode is automatically selected according
to the connected display and you will need a DVI-I cable when connecting to a
display device. The VGA output mode supports up to 1920x1200 resolution. If
using VGA function, you will need a DVI-I to VGA module connected to DVI-I
device. Below is the DVI-I to VGA dongle image:
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
14
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
Multi-Stream Transport Display Max. Resolution
One panel Display 4096x2304@60Hz
Two panel Displays concurrently 2880x1800@60Hz
Three panel Displays concurrently 2304x1440@60Hz
2.2.8 USB 3.0
There are 4 USB 3.0 connections available supporting up to 5GB per second
data rate in the front side of ECS-9200/9100 GTX1050. It is also compliant with
the requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and
Low Speed (LS).
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
2.2.9 Ethernet Port
There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel I219 Ethernet Phy and
LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN
2 work in normal status, iAMT 11.0 function is enabled. When using suitable
RJ-45 cable, you can connect the system to other computers or to any other
devices with Ethernet connection; for example, a hub or a switch. Moreover,
both of LAN 1 and LAN 2 support Wake on LAN and Pre-boot functions. The
pin-outs of LAN 1 and LAN 2 are listed as follows:
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
15
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2.2.10 Audio Jack
There are 2 audio connectors, Mic-in and Line-out, in the front side of ECS9200/9100 GTX1050. Onboard Realtek ALC892 audio codec supports 5.1
channel HD audio and fully complies with Intel High Definition Audio (Azalia)
specifications. To utilize the audio function in Windows platform, you need to
install the corresponding drivers for both Intel C236 chipset and Realtek ALC892
codec.
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network, and it lightens
in solid orange when the cable is properly connected to a 1000Mbps Ethernet
network. The left LED will keep twinkling/ off when Ethernet data packets are
being transmitted or received.
1 8
10Mbps 100Mbps 1000Mbps
Right
Bottom Led
Off
Solid
Green
Solid
Orange
Left
Bottom Led
Flash
Yellow
Flash
Yellow
Flash
Yellow
Pin No. 10/ 100Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ---- MDI2_P
Pin No. 10/ 100Mbps 1000Mbps
5 ----- MDI2_N
6 E_RX- MDI1_N
7 ----- MDI3_P
8 ------ MDI3_N
16
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
2.2.11 WLAN LED, Mini PCIe, SIM Card Comparison
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
Mini PCIe SIM LED
Mini PCIe 1 SIM 1 (CN12) 1
Mini PCIe 2 SIM 2 (CN13) 2
Mini PCIe 3 SIM 3 (CN11) 3
Mini PCIe Slot/SIM Slot/WLAN LED Mapping Table :
Mini PCIe 2
Mini PCIe 3
Mini PCIe 1
CN11
CN12 CN13
17
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2.2.12 SSD/HDD Tray
There are 2 front-access 2.5” SSD/HDD trays in the front side of ECS9200/9100 GTX1050. Just trigger to open the SSD/ HDD tray, up to 4TB is
available.
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
HDD 1
HDD 2
2.2.13 System FAN
There is a system FAN on front side for airow direction outward. You can adjust
the FAN Speed from Vecow BIOS Setting. (refer to 4.3.6_Hardware Monitor_FAN
PWM Value)
RST
DP LAN 1
LAN 2
DVI-D
DVI-I
CFast
SIM 2 SIM 3
SIM 1
1 2 3
WLAN
18
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
2.3 Rear Panel I/O & Functions
2.3.1 Power Terminal Block
It is a 3-pin power-on or power-off switch through Phoenix Contact terminal
block. You could turn on or off the system power by using this contact. This
terminal block supports dual functions of soft power-on/power-off (instant off or
delay 4 second) and suspend mode.
Pin No. Denition Pin No. Denition
1 Ignition 2 External Power Button V+
3 External Power Button V-
This system supports 6V to 36V DC power input by terminal block in the rear
side. In normal power operation, power LED lightens in solid green. It supports
up to 80V surge protection.
COM 1
COM 2
COM 3COM 4
V+ V
-
On | Off
DC-IN
IGN
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
Isolated
DIO 1
DVI
DP
HDMI
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
Pin No. Denition Pin No. Denition
1 V+ 2 V-
3 Chassis Ground
2.3.2 Remote Power On/O Switch & Ignition
COM 1
COM 2
COM 3COM 4
V+ V
-
On | Off
DC-IN
IGN
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
Isolated
DIO 1
DVI
DP
HDMI
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
19
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
Serial
Port
Pin No. RS-232 RS-422
(5-wire)
RS-422
(9-wire)
RS-485
(3-wire)
1 to 4
1 DCD TXD- TXD- DATA -
2 RXD TXD+ TXD+ D ATA+
3 TXD RXD+ RXD+ -----------
4 DTR RXD- RXD- -----------
5 GND GND GND GND
6 DSR ----------- RTS- -----------
7 RTS ----------- RTS+ -----------
8 CTS ----------- CTS+ -----------
9 RI ----------- CTS- -----------
The pin assignments are listed in the table as below:
BIOS Setting Function
COM 1
COM 2
COM 3
COM 4
RS-232
RS-422 (5-wire)
RS-422 (9-wire)
RS-485
RS-485 w/z auto-ow control
2.3.3 COM Ports
Serial port 1 to 4 (COM 1 to 4) can be congured for RS-232, RS-422, or RS485 with auto ow control communication. The default denition of COM 1 and
COM 2 is RS-232. If you want to change to RS-422 or RS-485, you can nd the
setting in BIOS.
COM 1
COM 2
COM 3COM 4
V+ V
-
On | Off
DC-IN
IGN
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
Isolated
DIO 1
DVI
DP
HDMI
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
20
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
COM 3 & COM 4 MB connector table:
COM Port MB Connector COM Port MB Connector
COM 3 CN9 COM 4 CN10
CN Pin No. Signal Name
CN9 (COM3)
CN10 (COM4)
1 Chassis GND
2 GND
3 RI
4 DTR
5 CTS
6 TXD
7 RTS
8 RXD
9 DSR
10 DCD
COM 3 & COM 4 MB connector pin out:
CN10
CN9
21
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2.3.4 Rear USB 3.0
There are 4 USB 3.0 connections available supporting up to 5GB per second
data rate in the rear side of ECS-9200/9100 GTX1050. It is also compliant with
the requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and
Low Speed (LS).
COM 1
COM 2
COM 3COM 4
V+ V
-
On | Off
DC-IN
IGN
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
Isolated
DIO 1
DVI
DP
HDMI
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
2.3.5 PoE Ethernet Port
There are 4 RJ45 connectors in the rear side of ECS-9200 GTX1050. It
supports IEEE 802.3at (PoE+) Power over Ethernet (PoE) connection delivering
up to 30.4W/54V per port and 1000BASE-T GigE data signals over standard
Ethernet Cat 5/Cat 6 cable. Each PoE connection is powered by Intel® I210
GigE Ethernet controller and independent PCI express interface to connect with
multi-core processor for network and data transmit optimization. Only when
PoE port starts to supply power to power devices, the dedicated LED will be
lightened.
PS. Suggest to use PoE function when power input is over 12V.
COM 1
COM 2
COM 3COM 4
V+ V
-
On | Off
DC-IN
IGN
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
Isolated
DIO 1
DVI
DP
HDMI
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
22
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050©Vecow ECS-9200/9100 GTX1050 User Manual
Pin No. 10/ 100 Mbps 1000 Mbps PoE
1 E_TX+ MDI0_P PoE+
2 E_TX- MDI0_N PoE+
3 E_RX+ MDI1_P PoE-
4 ---- MDI2_P ----
5 ----- MDI2_N ----
6 E_RX- MDI1_N PoE-
7 ----- MDI3_P ----
8 ------ MDI3_N ----
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection & PoE status LED.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network. The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network. The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
1 8
LED Status 10Mbps 100Mbps 1000Mbps
Right
Bottom Led
Off
Solid
Green
Solid
Orange
Left
Bottom Led
Flash
Yellow
Flash
Yellow
Flash
Yellow
LED Location LED Color Status
LAN3 Green
Green Light: PD installed & powered green
Off: Non PD
LAN4 Green
Green Light: PD installed & powered green
Off: Non PD
LAN5 Green
Green Light: PD installed & powered green
Off: Non PD
LAN6 Green
Green Light: PD installed & powered green
Off: Non PD
PoE LED indicator:
The pin-outs of LAN 3 to LAN 6 are listed as follows:
23
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
2.3.6 Isolated DIO
COM 1
COM 2
COM 3COM 4
V+ V
-
On | Off
DC-IN
IGN
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
Isolated
DIO 1
DVI
DP
HDMI
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
There is a 32-bit (16-bit DI, 16-bit DO) with 2 DIO connectors in the rear side.
DI/DIO supports NPN(sink) and PNP(Source) mode, and each DI channel is
equipped with a photocouper for isolated protection. Each DO with isolator chip
is congured by a Jumper for each DIO connector.
DO Safety-Related Certications:
• 4242-VPK Basic Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1
• 3-KVRMS Isolation for 1 minute per UL 1577
• CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment Standards
• GB4943.1-2011 CQC Certied
Isolated
DIO
D IPIN 1 ~ 8 DOPIN 11 ~ 18
20 11
10 1
DIO Pin No. Denition Function
DIO1
1 INPUT 0 SIO_GPI80
2 INPUT 1 SIO_GPI81
3 INPUT 2 SIO_GPI82
4 INPUT 3 SIO_GPI83
5 INPUT 4 SIO_GPI84
6 INPUT 5 SIO_GPI85
7 INPUT 6 SIO_GPI86
8 INPUT 7 SIO_GPI87
9 DI1_COM -
10 DIO1_GND -
11 OUTPUT 0 SIO_GPO70
12 OUTPUT 1 SIO_GPO71
13 OUTPUT 2 SIO_GPO72
14 OUTPUT 3 SIO_GPO73
15 OUTPUT 4 SIO_GPO74
16 OUTPUT 5 SIO_GPO75
17 OUTPUT 6 SIO_GPO76
18 OUTPUT 7 SIO_GPO77
19 DIO1_GND -
20 DIO1_VDC (6~48V Input) -
DIO Connectors pin out:
Loading...