Vecow ECS-9000 User Manual

Download

USER Manual

1.1.0 Edition 20170509

Quad Core Intel® Core™ i7/i5/i3 w/C236 Fanless Embedded System

High Performance, Rugged, -40°C to 75°C Extended Temp.

ECS-9000

Version Date Page Description Remark

1.0 11/25/2016 All Ofcial Release

1.1 05/09/2017 97 Update

Record of Revision

iii

This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation or any infringements upon the rights of third parties, which may result from such use.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC

The products described in this manual complies with all applicable European Union (CE) directives if it has a CE marking. For computer systems to remain CE compliant, only CE-compliant parts may be used. Maintaining CE compliance also requires proper cable and cabling techniques.

This document contains proprietary information protected by copyright. No part of this publication may be reproduced in any form or by any means, electric, photocopying, recording or otherwise, without prior written authorization by Vecow Co., Ltd. The rights of all the brand names, product names, and trademarks belong to their respective owners.

Disclaimer

Declaration of Conformity

Part Number Description

ECS-9000-9GD

ECS-9000, 9 GigE LAN with 4 PoE

, M2DOM, 6 USB 3.0,

4 COM, 3 SIM, 16 Isolated DIO

ECS-9000-9R

ECS-9000, 9 GigE LAN with 4 PoE

, 2 Front-access SSD Tray,

M2DOM, 6 USB 3.0, 4 COM, 3 SIM, Isolated DIO

ECS-9000-PoER

ECS-9000, 6 GigE LAN with 4 PoE

, 2 Front-access SSD Tray,

M2DOM, 6 USB 3.0, 4 COM, 3 SIM, Isolated DIO

ECS-9000-PoE

ECS-9000, 6 GigE LAN with 4 PoE

, M2DOM, 6 USB 3.0,

4 COM, 3 SIM, Isolated DIO

ECS-9000-6F

ECS-9000, 6 GigE LAN with 2 SFP, M2DOM, 6 USB 3.0, 4 COM, 3 SIM, 16 GPIO

ECS-9000-6FR

ECS-9000, 6 GigE LAN with 2 SFP, 2 Front-access SSD Tray, M2DOM, 6 USB 3.0, 4 COM, 3 SIM, 16 GPIO

ECS-9000-4G

ECS-9000, 4 GigE LAN, M2DOM, 6 USB 3.0, 4 COM, 3 SIM, 16 GPIO

ECS-9000-4R

ECS-9000, 4 GigE LAN, 2 Front-access SSD Tray, M2DOM, 6 USB 3.0, 4 COM, 3 SIM, 16 GPIO

ECS-9000-2G

ECS-9000, 2 GigE LAN, M2DOM, 6 USB 3.0, 4 COM, 3 SIM, 16 GPIO

ECS-9000-2R

ECS-9000, 2 GigE LAN, 2 Front-access SSD Tray, M2DOM, 6 USB 3.0, 4 COM, 3 SIM, 16 GPIO

Order Information

Part Number Description

i7-6700

6th Gen Intel

Core™ i7-6700 Processor

(8M Cache, up to 4.00 GHz)

i7-6700TE

6th Gen Intel

Core™ i7-6700TE Processor

(8M Cache, up to 3.40 GHz)

i5-6500

6th Gen Intel

Core™ i5-6500 Processor

(6M Cache, up to 3.60 GHz)

i5-6500TE

6th Gen Intel

Core™ i5-6500TE Processor

(6M Cache, up to 3.30 GHz)

i3-6100

6th Gen Intel

Core™ i3-6100 Processor

(3M Cache, 3.70 GHz)

i3-6100TE

6th Gen Intel

Core™ i3-6100TE Processor

(4M Cache, 2.70 GHz)

DDR4 16G Certied DDR4 16GB 2133MHz RAM

DDR4 8G Certied DDR4 8GB 2133MHz RAM

DDR4 4G Certied DDR4 4GB 2133MHz RAM

PWA-280W-WT

280W, 24V, 85V AC to 264V AC Power Adaptor with 3-pin Terminal Block, Wide Temperature -30°C to +70°C

PWA-160W-WT

160W, 24V, 85V AC to 264V AC Power Adaptor with 3-pin Terminal Block, Wide Temperature -30°C to +70°C

PWA-120W

120W, 24V, 90V AC to 264V AC Power Adapter with 4-pin Mini-DIN Connector

VESA Mount VESA Mounting Kit

DIN-RAIL DIN Rail Kit

Rack Mount 2U Rackmount Kit

TMK2-20P-100 Terminal Block 20-pin to Terminal Block 20-pin Cable, 100cm

TMK2-20P-500 Terminal Block 20-pin to Terminal Block 20-pin Cable, 500cm

TMB-TMBK-20P

Terminal Board with One 20-pin Terminal Block Connector and DIN-Rail Mounting

3G Module Mini PCIe 3G/GPS Module with Antenna

4G Module Mini PCIe 4G/GPS Module with Antenna

WiFi & Bluetooth Module

Intel

Mini PCIe WiFi & Bluetooth Module with Antenna

Order Accessories

Table of Contents

CHAPTER 1 GENERAL INTRODUCTION 1

1.1 Overview 1

1.2 Features 2

1.3 Product Specication 2

1.3.1 Specications of ECS-9000-9GD 2

1.3.2 Specications of ECS-9000-9R 4

1.3.3 Specications of ECS-9000-PoER 7

1.3.4 Specications of ECS-9000-PoE 9

1.3.5 Specications of ECS-9000-6F 11

1.3.6 Specications of ECS-9000-6FR 13

1.3.7 Specications of ECS-9000-4G 16

1.3.8 Specications of ECS-9000-4R 18

1.3.9 Specications of ECS-9000-2G 20

1.3.10 Specications of ECS-9000-2R 22

1.4 Supported CPU List 24

1.5 Mechanical Dimension 24

1.5.1 Dimensions of ECS-9000-9GD 24

1.5.2 Dimensions of ECS-9000-9R 24

1.5.3 Dimensions of ECS-9000-PoER 25

1.5.4 Dimensions of ECS-9000-PoE 25

1.5.5 Dimensions of ECS-9000-6F 25

1.5.6 Dimensions of ECS-9000-6FR 26

1.5.7 Dimensions of ECS-9000-4G 26

1.5.8 Dimensions of ECS-9000-4R 26

1.5.9 Dimensions of ECS-9000-2G 27

1.5.10 Dimensions of ECS-9000-2R 27

CHAPTER 2 GETTING TO KNOW YOUR ECS-9000 28

2.1 Packing List 28

2.2 Front Panel I/O Functions 29

2.3 Rear Panel I/O and Functions 36

2.4 Main Board Expansion Connectors 41

vii

2.5 Main Board Jumper & Deep Switch Settings 53

2.6 Ignition Control 56

CHAPTER 3 SYSTEM SETUP 59

3.1 How to Open Your ECS-9000 59

3.2 Installing CPU 63

3.3 Installing DDR4 SO-DIMM Modules 66

3.4 Installing Mini PCIe Card 67

3.5 Installing Antenna Cable 68

3.6 Installing CFast Card 69

3.7 Installing SIM Card 71

3.8 Installing SSD/ HDD 73

3.9 Installing M2DOM 77

3.10Mounting Your ECS-9000 79

CHAPTER 4 BIOS SETUP 85

4.1 BIOS Settings 85

4.2 Main 86

4.3 Advanced 86

4.4 Chipset 95

4.5 Security 100

4.6 Boot 101

4.7 Save & Exit 102

APPENDIX A : Isolated DIO Guide 103

APPENDIX B : GPIO-WDT Functions 108

APPENDIX C : RAID Functions 109

APPENDIX D : Power Consumption 113

APPENDIX E : Supported Memory & Storage List 117

GENERAL INTRODUCTION

Vecow ECS-9000 Series is an all-in-one integrated Fanless Embedded Workstation System. LGA1151 Socket supports Quad Core 6th Generation Intel

Xeon®/ Core™ i7/i5/i3 processor (Skylake-S) running with workstation-

grade Intel

C236 chipset, dual channel DDR4 2133MHz up to 32GB ECC

memory, advanced Intel

HD Graphics 530 supporting DirectX 12, OpenGL 4.4 and OpenCL 2.0 API, onboard DVI-I, DVI-D and DisplayPort display interface for Ultra HD 4K resolution, ECS-9000 offers new generation CPU performance, power efciency, and graphics performance; PCIe 3.0 (8GT/s), Multiple SATA III (6Gbps), USB 3.0 (5Gbps), PoE (1Gbps) LAN and multiple wireless connections make seamless high-speed data conveying possible. Vecow ECS-9000 Series Fanless Embedded System delivers outstanding system performance and power productivity for demanding workloads in real-time mission critical embedded computing applications.

All-in-one and cable-less designs, fanless -40°C to 75°C operating temperature, 6 GigE LAN ports with 4 IEEE 802.3at (25.5W/ 48V) PoE

without additional power connections, 2 Front-access 2.5” SSD/ HDD trays, up to 6 SIM card sockets for 3G/ 4G/ LTE/ WiFi/ GPRS/ UMTS, 1 M2DOM socket for up to 8GT per second data transfer, 1 Front-access CFast socket, 2 SATA III supports software RAID function, 6 external USB 3.0, 4 COM RS-232/ 422/ 485, up to 6 Mini PCIe expansions, 16 Isolated DIO, 6V to 36V wide range power input with 80V surge protection, configurable ignition power control, smart remote management features, remote power switch, EN50155 and EN50121-3-2 compliant, optional supports full function SUMIT A, B expansion for multiple 10G LAN/ 10G SPF+ Fiber connections, Vecow ECS-9000 Series Fanless Embedded System serves new-generation integration for rugged embedded applications.

With outstanding system performance, leading integrated features, smart manageability, flexible expandability, excellent mobile availability, secure power protection and more rugged reliability, Vecow ECS-9000 Series Fanless Embedded System is your superb solution for Machine Vision, Intelligent Automation, Smart Manufacturing, Embedded Cloud, Intelligent Surveillance, Vehicle Computing, Mobile Robot Control, and any performance-driven real-time Industry 4.0 applications in harsh environments.

1.1 Overview

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.2 Features

• LGA 1151 Socket supports Quad Core 6th Generation Intel

Core™ i7/i5/i3 Processor (Skylake-S) with Intel® C236 Chipset

• Fanless, -40°C to 75°C Operating Temperature

• 2 DDR4 2133MHz Memory, up to 32GB

• Up to 9 GigE LAN with 4 IEEE 802.3at PoE+, iAMT 11.0 supported (Optional)

• 6 Independent GigE LAN with 2 SFP, iAMT 11.0 supported (Optional)

• DVI-I, DVI-D and DisplayPort display interface, up to 4K display

• 3 Mini PCIe Slot, 4 COM, 6 USB 3.0

• 3 External SIM Card Socket support 3G/ 4G/ LTE/ WiFi/ GPRS/ UMTS

• M2DOM supports up to 8GT/s data rate

• Up to 2 Front-access 2.5" HDD/ SSD Tray, 1 Front-access CFast Socket

• Full function SUMIT A, B expansion (Optional)

• 16 Isolated DIO (Optional)

• 6V to 36V DC Power Input with 80V Surge Protection

• Configurable Ignition Power Control

1.3 Product Specication

1.3.1 Specications of ECS-9000-9GD

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless, PoE

SIM Card 3 SIM Card Socket (External)

GENERAL INTRODUCTION

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 2.5” SSD/ HDD Bracket (Internal)

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

LAN 3 Intel

I210 GigE LAN

LAN 4 Intel

I210 GigE LAN

LAN 5 Intel

I210 GigE LAN

LAN 6 Intel

I210 GigE LAN

PoE

LAN 3 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210

LAN 4 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

LAN 5 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

LAN 6 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

1.3.2 Specications of ECS-9000-9R

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

GENERAL INTRODUCTION

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless, PoE

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/ HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

LAN 7 Intel

82574L GigE LAN

LAN 8 Intel

82574L GigE LAN

LAN 9 Intel

82574L GigE LAN

PoE

LAN 3 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210

LAN 4 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

LAN 5 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210

LAN 6 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

GENERAL INTRODUCTION

1.3.3 Specications of ECS-9000-PoER

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless, PoE

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/ HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

PoE

LAN 3 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210

LAN 4 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

LAN 5 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

LAN 6 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

GENERAL INTRODUCTION

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

1.3.4 Specications of ECS-9000-PoE

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless, PoE

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 2.5" SSD/ HDD Bracket (Internal)

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

PoE

LAN 3 GigE IEEE 802.3at (25.5W/48V) PoE+ by Intel® I210

LAN 4 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

LAN 5 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

LAN 6 GigE IEEE 802.3at (25.5W/48V) PoE

by Intel® I210

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

GENERAL INTRODUCTION

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

1.3.5 Specications of ECS-9000-6F

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 2.5" SSD/ HDD Bracket (Internal)

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

LAN 3 Intel

I210 GigE LAN

LAN 4 Intel

I210 GigE LAN

LAN 5 Intel

I350 GigE LAN supports SFP+

LAN 6 Intel

I350 GigE LAN supports SFP+

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

GENERAL INTRODUCTION

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

1.3.6 Specications of ECS-9000-6FR

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/ HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

LAN 3 Intel

I210 GigE LAN

LAN 4 Intel

I210 GigE LAN

LAN 5 Intel

I350 GigE LAN supports SFP+

LAN 6 Intel

I350 GigE LAN supports SFP+

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

GENERAL INTRODUCTION

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.3.7 Specications of ECS-9000-4G

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 2.5" SSD/ HDD Bracket (Internal)

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

GENERAL INTRODUCTION

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

LAN 3 Intel

I210 GigE LAN

LAN 4 Intel

I210 GigE LAN

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.3.8 Specications of ECS-9000-4R

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/ HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

GENERAL INTRODUCTION

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

LAN 3 Intel

I210 GigE LAN

LAN 4 Intel

I210 GigE LAN

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.3.9 Specications of ECS-9000-2G

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 2.5" SSD/ HDD Bracket (Internal)

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

GENERAL INTRODUCTION

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.3.10 Specications of ECS-9000-2R

System

Processor Intel® Core™ i7-6700/ i7-6700TE/ i5-6500/ i5-6500TE/

i3-6100/ i3-6100TE Processor (Skylake-S)

Chipset Intel

C236

BIOS AMI

SIO IT8786E

Memory • DDR4 2133MHz

• Up to 32GB

• 2 260-pin SO-DIMM Socket

I/O Interface

Serial 4 COM RS-232/ 422/ 485 w/ auto flow control

USB • 6 USB 3.0 (External)

• 1 USB 2.0 (Internal)

Isolated DIO 16 Isolated DIO (8 DI, 8 DO)

LED Power, HDD, Wireless

SIM Card 3 SIM Card Socket (External)

Expansion

Mini PCIe 3 Mini PCIe Socket :

• 2 Full-size for PCIe/ USB/ External SIM Card/ mSATA

• 1 Half-size for PCIe/ USB 3.0/ External SIM Card

SUMIT A, B 2 SUMIT Slot (Optional)

Graphics

Graphics Processor Intel® HD Graphics 530

Interface • DVI-I : Up to 1920 x 1200 @ 60Hz

• DVI-D : Up to 1920 x 1200 @ 60Hz

• DisplayPort : Up to 4096 x 2304 @ 60Hz

Storage

SATA 2 SATA III (6Gbps)

mSATA 2 SATA III (Mini PCIe Type, 6Gbps)

SATA DOM 1 SATA II (3Gbps)

M2DOM 1 PCIe 3.0 (8GT/s)/ SATA III (6Gbps)

Storage Device • 1 CFast Socket, Push-in/ Push-out Ejector

• 2 Front-access 2.5" SSD/ HDD Tray

Audio

Audio Codec Realtek ALC892, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

GENERAL INTRODUCTION

Ethernet

LAN 1 Intel® I219LM GigE LAN supports iAMT 11.0

LAN 2 Intel

I210 GigE LAN

Power

Input Voltage 6V to 36V, DC-in

Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground

• Mini-DIN 4-pin

Ignition Control 16 Mode (Internal)

Remote Switch 3-pin Terminal Block : On, Off, IGN

Surge Protection Up to 80V/1ms Transient Power

Others

TPM Optional Inneon SLB9665 supports TPM 2.0, LPC

interface

Watchdog Timer Reset : 1 to 255 sec./min. per step

Smart Management Wake on LAN, PXE supported

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

Software Support

OS Windows 10, Windows 8.1, Windows 7, Linux

Mechanical

Dimensions (WxDxH) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11")

Weight 3.8 kg (8.38 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

• 2U Rackmount (Optional)

Environment

Operating Temperature • 35W TDP CPU (i7-6700TE, i5-6500TE, i3-6100TE) :

-40°C to 75°C (-40°F to 167°F)

• 65W TDP CPU (i7-6700/ i5-6500/ i3-6100) :

-40°C to 55°C (-40°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 70°C

Shock • IEC 60068-2-27

• SSD : 50G @ Wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.4 Supported CPU List

Processor No. TDP Cache Max. Frequency Embedded

Intel

Core™ i7-6700 65W 8M Up to 4.70 GHz

Intel

Core™ i7-6700TE 35W 8M Up to 3.40 GHz

Intel

Core™ i5-6500 65W 8M Up to 3.60 GHz

Intel

Core™ i5-6500TE 35W 8M Up to 3.30 GHz

Intel

Core™ i3-6100 65W 6M Up to 3.70 GHz

Intel

Core™ i3-6100TE 35W 6M Up to 2.70 GHz

1.5 Mechanical Dimension

1.5.1 Dimensions of ECS-9000-9GD

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

1.5.2 Dimensions of ECS-9000-9R

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

GENERAL INTRODUCTION

1.5.3 Dimensions of ECS-9000-PoER

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

1.5.4 Dimensions of ECS-9000-PoE

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

1.5.5 Dimensions of ECS-9000-6F

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

GENERAL INTRODUCTION

©Vecow ECS-9000 User Manual

1.5.6 Dimensions of ECS-9000-6FR

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

1.5.7 Dimensions of ECS-9000-4G

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

1.5.8 Dimensions of ECS-9000-4R

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

GENERAL INTRODUCTION

1.5.9 Dimensions of ECS-9000-2G

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

1.5.10 Dimensions of ECS-9000-2R

260.0 (10.24”)

282.0 (11.10”)

297.0 (11.69”)

115.0 (4.53”)

175.0 (6.89”)

79.1 (3.11”)

Unit: mm (inch)

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

GETTING TO KNOW YOUR ECS-9000

2.1 Packing List

Item Description Qty

1 ECS-9000 Fanless Embedded System (According to the

conguration of you order, the ECS-9000 series may contain SSD/HDD and DDR4 SO-DIMM. Please verify these items if necessary.)

2 ECS-9000-9GD/PoE/6F/4G/2G accessory box, which contains

● Vecow Drivers & Utilities DVD

● Wall-mounting bracket

● KHS#6-32x6 screw for wall-mounting bracket

● M2.5x6 screw for Mini PCIe Slot

● Antenna-M6x4-Sn-Ni

● Din-Rail-PH-Mx16.5-S-Ni

● 3-pin pluggable terminal block

● 20-pin pluggable terminal block

● Foot Pad

● SSD/HDD Bracket KH-M3x6L Ni

● SATA cable

1 2

8 3 3 4

2 1

4 8

3 ECS-9000-9R/PoER/6FR/4R/2R accessory box, which contains

● Vecow Drivers & Utilities DVD

● Wall-mounting bracket

● KHS#6-32x6 screw for wall-mounting bracket

● M2.5x6 screw for Mini PCIe Slot

● Antenna-M6x4-Sn-Ni

● Din-Rail-PH-M4x16.5-S-Ni

● 3-pin pluggable terminal block

● 20-pin pluggable terminal block

● Foot Pad

● SSD/HDD Tray Key

1 2

8 3 3 4

2 1

GETTING TO KNOW YOUR ECS-9000

2.2 Front Panel I/O Functions

In Vecow ECS-9000 series family, all I/O connectors are located on front panel and rear panel. Most of the general connections to computer device, such as USB, LAN Jack, Display, DVI-D, Display Port and any additional storage, are placed on the front panel.

2.2.1 Reset Tact Switch

It is a hardware reset switch. Use this switch to reset the system without power off the system. Press the Reset Switch for a few seconds, then reset will be enabled.

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

2.2.2 Power Button

The Power Button is a non-latched switch with dual color LED indication. It indicates power status: S0, S3 and S5. More detail LED indications are listed as follows:

LED Color Power Status System Status

Solid Blue S0 System working

Solid Orange S3, S5 Suspend to RAM, System off with standby power

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

Pin No. Description Pin No. Description

S1 GND PC6 NC

S2 SATA_TXP5 PC7 GND

S3 SATA_TXN5 PC8 CFAST_LED

S4 GND PC9 NC

S5 SATA_RXN5 PC10 NC

S6 SATA_RXP5 PC11 NC

S7 GND PC12 NC

PC1 GND PC13 +3.3V

PC2 GND PC14 +3.3V

PC3 NC PC15 GND

PC4 NC PC16 GND

PC5 NC PC17 NC

2.2.3 CFast Card

There is a CFast socket on the front panel supporting Type-I/II Compact Flash card. It is implemented by a SATA III Port from CM236 PCH. Be sure to disconnect the power source and unscrew the CFast socket cover before installing a CFast card. The ECS-9000 does not support the CFast hot swap and PnP (Plug and Play) functions. It is necessary to remove power source rst before inserting or removing the CFast card.

The pinouts of CFast port are listed as follows:

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

To power on the system, press the power button and then the blue LED is lightened. To power off the system, you can either command shutdown by OS operation, or just simply press the power button.

If system error, you can just press the power button for 4 seconds to shut down the machine directly. Please do note that a 4-second interval between each 2 power-on/ power-off operation is necessary in normal working status. (For example, once turning off the system, you have to wait for 4 seconds to initiate another power-on operation).

GETTING TO KNOW YOUR ECS-9000

2.2.4 PWR and HDD LED Indicator

HDD LED/ Yellow: A Hard Disk/ CFast LED. If the LED is on, it indicates that the system’s storage is functional. If it is off, it indicates that the system’s storage is not functional. If it is ashing, it indicates data access activities.

Power LED/ Green: If the LED is solid green, it indicates that the system is powered on.

LED Color Power Status System Status

Yellow HDD/ CFast

• On/ Off : Storage status, function or not.

• Twinkling : Data transferring.

Green Power System power status (on/ off)

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

2.2.5 DVI-D Connector

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

The DVI-D connector on the front panel supports DVI display. This connector can either output DVI signal. The DVI output mode supports up to 1920 x 1200 resolution and output mode supports up to 1920 x 1200 resolution. The DVI is automatically selected according to the display device connected. You will need a DVI-D cable when connecting to a display device.

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

2.2.6 DVI-I Connector

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

The DVI-I connector on the front panel supports both DVI and VGA display modes. This connector can output DVI signals. The DVI output mode supports up to 1920x1200 resolution. The DVI mode is automatically selected according to the display device connected. You will need a DVI-I cable when connecting to a display device. The VGA output mode supports up to 1920x1200 resolution. If use VGA function will need a DVI-I to VGA module connecting to DVI-I device. Below is the DVI-I to VGA module picture:

2.2.7 DisplayPort

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

Onboard Display Port support auxiliary channel dual mode, connection supports up to 4096x2304 resolution at 60 Hz.

GETTING TO KNOW YOUR ECS-9000

2.2.8 USB 3.0

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

There are 4 USB 3.0 connections available supporting up to 5GB per second data rate in the front side of ECS-9000. It also compliant with the requirements of Super Speed (SS), high speed (HS), full speed (FS) and low speed (LS).

2.2.9 WLAN LED, Mini PCIe, SIM Card Comparison

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

Mini PCIe SIM LED

Mini PCIe 1 SIM 1 (CN9) 1

Mini PCIe 2 SIM 2 (CN10) 2

Mini PCIe 3 SIM 3 (CN11) 3

Mini PCIe Slot/ SIM Slot/ WLAN LED Mapping Table :

SIM 1

SIM3

SIM 2

CN11

Mini PCIe 1

Mini PCIe 2

Mini PCIe 3

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

2.2.9 Ethernet Port

There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet connections in the front side. LAN 1 is powered by Intel i219 Ethernet Phy; LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN 2 work in normal status, iAMT 11.0 function is enabled.

Using suitable RJ-45 cable, you can connect the system to a computer, or to any other devices with Ethernet connection, for example, a hub or a switch. Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot functions. The pin-outs of LAN 1 and LAN 2 are listed as follows:

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

Pin No. 10/ 100Mbps 1000Mbps

1 E_TX+ MDI0_P

2 E_TX- MDI0_N

3 E_RX+ MDI1_P

4 ---- MDI2_P

5 ----- MDI2_N

6 E_RX- MDI1_N

7 ----- MDI3_P

8 ------ MDI3_N

Note: The SIM card sockets do not support hot-plug. Please make sure to unplug the system power before inserting the SIM card(s).

CN10 CN9

GETTING TO KNOW YOUR ECS-9000

Each LAN port is supported by standard RJ-45 connector with LED indicators to present Active/ Link/ Speed status of the connection. The LED indicator on the right bottom corner lightens in solid green when the cable is properly connected to a 100 Mbps Ethernet network; The LED indicator on the right bottom corner lightens in solid orange when the cable is properly connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/ off when Ethernet data packets are being transmitted/ received.

1 8

10Mbps 100Mbps 1000Mbps

Right

Bottom Led

Off Solid

Green

Solid

Orange

Left

Bottom Led

Flash

Yellow

Flash

Yellow

Flash

Yellow

2.2.11 Audio Connector

There are 2 audio connectors, Mic-in and Line-out, in the front side of ECS-9000. Onboard Realtek ALC892 audio codec supports 5.1 channel HD audio and fully complies with Intel

High Denition Audio (Azalia) specications. To utilize the audio function in Windows platform, you need to install corresponding drivers for both Intel CM236 chipset and Realtek ALC892 codec.

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

2.2.12 SSD/ HDD Tray

There are 2 front-access 2.5” SSD/ HDD trays in the front side of ECS-9000. Just trigger to open the SSD/ HDD tray, up to 4TB is available.

Reset HDD

PWR

DVI-D

DVI-I

LAN 1LAN 2

CFast

SIM 1 SIM 2

SIM 3

1 2 3

WLAN

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

2.3 Rear Panel I/O and Functions

2.3.1 Power Terminal Block

2.3.2 Remote Power On/ O Switch & Ignition

COM 1

COM 2

COM 3

COM 4

DC-IN

Isolated

DIO

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

Power Switch

On / OffIGN

LAN 4

LAN 3

LAN 6

LAN 5

3 4

PoE+

5 6

PoE+

It is a 2-pin power-on or power-off switch through Phoenix Contact terminal block. You could turn on or off the system power by using this contact. This terminal block supports dual function of soft power-on/ power-off (instant off or delay 4 second), and suspend mode.

Pin No. Denition Pin No. Denition

1 Ignition 2 External Power Button V+

3 External Power Button V-

This system supports 6V to 36V DC power input by terminal block in the rear side. In normal power operation, power LED lightens in solid green. Supports up to 80V surge protection.

COM 1

COM 2

COM 3

COM 4

DC-IN

Isolated

DIO

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

Power Switch

On / OffIGN

LAN 4

LAN 3

LAN 6

LAN 5

3 4

PoE+

5 6

PoE+

Pin No. Denition Pin No. Denition

1 V+ 2 V-

3 Chassis Ground

GETTING TO KNOW YOUR ECS-9000

2.3.3 Isolated DIO

COM 1

COM 2

COM 3

COM 4

DC-IN

Isolated

DIO

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

Power Switch

On / OffIGN

LAN 4

LAN 3

LAN 6

LAN 5

3 4

PoE+

5 6

PoE+

There is a 16-bit (8-bit DI, 8-bit DO) connectors in the rear side. DI/DIO support NPN(sink) and PNP(Source) mode, Each DI channel is equipped with a photocouper for isolated protection. Each DO with isolator chip, Config by a Jumper for each DIO connector. DO Safety-Related Certications:

• 4242-VPK Basic Isolation per DIN V VDE V 0884-10 and DIN EN 61010-1

• 3-KVRMS Isolation for 1 minute per UL 1577

• CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards

• GB4943.1-2011 CQC Certied

Isolated

DIO

D IPIN 1 ~ 8 DOPIN 11 ~ 18

20 11

10 1

DIO Pin No. Denition Function

DIO

1 INPUT 0 SIO_GPI80

2 INPUT 1 SIO_GPI81

3 INPUT 2 SIO_GPI82

4 INPUT 3 SIO_GPI83

5 INPUT 4 SIO_GPI84

6 INPUT 5 SIO_GPI85

7 INPUT 6 SIO_GPI86

8 INPUT 7 SIO_GPI87

9 DI1_COM -

10 DIO1_GND -

11 OUTPUT 0 SIO_GPO70

12 OUTPUT 1 SIO_GPO71

13 OUTPUT 2 SIO_GPO72

14 OUTPUT 3 SIO_GPO73

15 OUTPUT 4 SIO_GPO74

16 OUTPUT 5 SIO_GPO75

17 OUTPUT 6 SIO_GPO76

18 OUTPUT 7 SIO_GPO77

19 DIO1_GND -

20 DIO1_VDC (6~48V Input) -

DIO Connectors pin out:

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

Sink Mode (NPN)

V+

V-

Power Supply

6-48V DC

DI_COM (Pin 9)

DI (Pin1-8)

DIO Connector

Source Mode (PNP)

V+

V-

Power Supply

6-48V DC

DI_COM (Pin 9)

DI (Pin1-8)

DIO Connector

DIO Jumper Setting Status

DIO1 JP9 1-2 (Default)

NPN (Sink Mode):

Max. Input current 100mA / 6 ~48V

DIO1 JP9 2-3

PNP (Source Mode):

Max. output current 100mA / 6 ~48V

DO Jumper Setting Table:

DO reference circuit:

Sink Mode (NPN, Default)

V+

V-

Device

6-48V DC

DIO_VDC (Pin 20)

DO (Pin11-18)

DIO_GND (Pin10,19)

DIO Connector

Source Mode (PNP)

V+

V-

Device

6-48V DC

DIO_VDC (Pin 20)

DO (Pin11-18)

DIO_GND (Pin10,19)

DIO Connector

JP9

GETTING TO KNOW YOUR ECS-9000

Serial

Port

Pin No. RS-232 RS-422

(5-wire)

RS-422 (9-wire)

RS-485 (3-wire)

1 to 4

1 DCD TXD- TXD- DATA-

2 RXD TXD+ TXD+ DATA+

3 TXD RXD+ RXD+ -----------

4 DTR RXD- RXD- -----------

5 GND GND GND GND

6 DSR ----------- RTS- -----------

7 RTS ----------- RTS+ -----------

8 CTS ----------- CTS+ -----------

9 RI ----------- CTS- -----------

The pin assignments are listed in the table as follow :

BIOS Setting Function

COM 1

COM 2

COM 3

COM 4

RS-232

RS-422 (5-wire)

RS-422 (9-wire)

RS-485

RS-485 w/z auto-ow control

2.3.4 Serial Port

Serial port 1 to 4 (COM 1 to 4) can be congured for RS-232, RS-422, or RS485 with auto ow control communication. The default denition of COM 1 and COM 2 is RS-232, if you want to change to RS-422 or RS-485, you can nd the setting in BIOS.

COM 1

COM 2

COM 3

COM 4

DC-IN

Isolated

DIO

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

Power Switch

On / OffIGN

LAN 4

LAN 3

LAN 6

LAN 5

3 4

PoE+

5 6

PoE+

GETTING TO KNOW YOUR ECS-9000©Vecow ECS-9000 User Manual

2.3.5 PoE (Power over Ethernet) Ports

There are 4 RJ45 connectors in the rear side of ECS-9000. It supports IEEE

802.3at (PoE

) Power over Ethernet (PoE) connection delivering up to 37W/ 54V per port and 1000BASE-T GigE data signals over standard Ethernet Cat 5/ Cat 6 cable. Each PoE connection is powered by Intel® I210 GigE Ethernet controller and independent PCI express interface to connect with multi-core processor for network and data transmit optimization. Only when PoE port starts to supply power to power devices, the dedicated LED will be lightened.

PS. Suggest to use PoE function when power input is over 12V.

The pin-outs of LAN 1 and LAN 2 are listed as follows:

COM 1

COM 2

COM 3

COM 4

DC-IN

Isolated

DIO

20 11

10 1

D IPIN 1 ~ 8 DOPIN 11 ~ 18

Power Switch

On / OffIGN

LAN 4

LAN 3

LAN 6

LAN 5

3 4

PoE+

5 6

PoE+

Pin No. 10/ 100 Mbps 1000 Mbps PoE

1 E_TX+ MDI0_P PoE+

2 E_TX- MDI0_N PoE+

3 E_RX+ MDI1_P PoE-

4 ---- MDI2_P ----

5 ----- MDI2_N ----

6 E_RX- MDI1_N PoE-

7 ----- MDI3_P ----

8 ------ MDI3_N ----

Each LAN port is supported by standard RJ-45 connector with LED indicators to present Active/ Link/ Speed status of the connection.

The LED indicator on the right bottom corner lightens in solid green when the cable is properly connected to a 100 Mbps Ethernet network; The LED indicator on the right bottom corner lightens in solid orange when the cable is properly connected to a 1000 Mbps Ethernet network; The left LED will keep twinkling/ off when Ethernet data packets are being transmitted/ received.

1 8

LED Status 10Mbps 100Mbps 1000Mbps

Right

Bottom Led

Off

Solid

Green

Solid

Orange

Left

Bottom Led

Flash

Yellow

Flash

Yellow

Flash

Yellow

GETTING TO KNOW YOUR ECS-9000

POE LED LED Color POE Status

LED 3 - 6 Solid Green POE ON

2.4 Main Board Expansion Connectors

2.4.1 Top View of ECS-9000 Main Board With Connector Location

SATA 1

SATA 2

CN14

JP3

SATA 3

JP7

JP8

JP9

BIOS

SODIMM 1

CN37

JP1

Battery

SUMITB

SUMITA

CN11

JP5JP6JP4J7

SODIMM 2

JP2

M2 CN1

Mini PCIe 1

Mini PCIe 2

Mini PCIe 3

FAN1

2.4.2 Bottom View of ECS-9000 Main Board With Connector Location

CN10 CN9

2.4.3 Miscellaneous Pin Header

2.0mm 2x4p header This pin header can be used as a backup for following functions, hard drive LED indicator, reset button, power LED indicator, and power-on/ off button, which already can be accessed by front panel and top panel. The pin-outs of Miscellaneous port are listed in following table:

Group Pin No. Description

HDD LED

1 HDD_LED_P

3 HDD_LED_N

GETTING TO KNOW YOUR ECS-9000

RESET BUTTON

5 FP_RST_BTN_N

7 Ground

POWER LED

2 PWR_LED_P

4 PWR_LED_N

POWER BUTTON

6 FP_PWR_BTN_IN

8 Ground

2.4.4 SATA III Connector

There are 3 onboard high performance Serial ATA III (SATA III) on ECS-9000. It supports higher storage capacity with less cabling effort and smaller required space.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

Pin No. Denition

5 RXN

6 RXP

7 GND

SATA 1

SATA 2

SATA 3

The pin assignments of SATA1 and SATA2 , SATA3 are listed in the following table:

2.4.5 SATA Power Connector

The ECS-9000 also equip with a SATA power connector. The one port supports 5V (Up to 2A) and 12V (Up to 2A) current to the hard drive or SSD.

The pin assignments of J3 , J4 are listed in the following table:

Pin No. Denition Pin No. Denition

1 +12V 3 GND

2 GND 4 +5V

2.4.6 M2DOM

Innodisk M2DOM S20/S30 3ME3 is a M.2 based disk module with vertical type form factor. By its mechanical design can help board maker to release up to 90% space of motherboard as we as improve system reliability by its xed mechanism. M2DOM series product will offer with multiple interfaces, including SATA III, PCIe. The SSD support hot plug function and can be removed or plugged-in during operation. User has to avoid hot plugging the SSD which is congured as boot device and installed operation system.

Surprise hot plug: The insertion of a SATA device into a backplane (combine signal andpower) that has power present. The device powers up and initiates an OOB sequence. Surprise hot removal: The removal of a SATA device from a powered backplane, without rst being placed in a quiescent state.

M2 CN1

GETTING TO KNOW YOUR ECS-9000

Model No. Denition

M2DOM

S20

3ME3

8GB

S20 / S30 16GB

S20 / S30 32GB

S20 / S30 64GB

S30 128GB

CN14

2.4.7 Internal USB

The USB 3.0 connections available supporting up to 5GB per second data rate. It also compliant with the requirements of SuperSpeed (SS), high speed (HS), full speed (FS) and low speed (LS). The pin assignments of CN14 are listed in the following table:

Connector Pin No. Description Pin No. Description

CN12

1 USB_VCC 6 StdA_SSRX+

2 USBD- 7 GND_DRAIN

3 USBD+ 8 StdA_SSTX−

4 GND 9 StdA_SSTX+

5 StdA_SSRX−

2.4.8 DDR4 Slot

There are 2 DDR4 channel onboard, support DDR4 2133/1866, max 32GB Each channel 16GB

Slot Description Slot Description

SODIMM_1 DDR4 Channel A SODIMM_2 DDR4 Channel B

SODIMM 1SODIMM 2

2.4.9 BIOS Socket

If the BIOS needs to be changed, please contact the Vecow RMA service team.

BIOS

GETTING TO KNOW YOUR ECS-9000

2.4.10 SUMIT A, SUMIT B

This system have standard SUMITA and SUMITB for SUMIT type add on cards.

SUMITB

SUMITA

Pin No. Function Pin No. Function

1 +5V_AUX 2 +12V

3 +3.3V 4 SMB_DATA

5 +3.3V 6 XMB_CLK

7 Reserved 8 Reserved

9 Reserved 10 SPI_MISO

11 USB_OC# 12 SPI_MOSI

13 Reserved 14 SPI_CLK

15 +5V 16 SPI_CS10

17 USB_3+ 18 SPI_CS1#

19 USB_3- 20 Reserved

21 +5V 22 LPC_DRQ1#

23 USB_2+ 24 LPC_AD0

25 USB_2- 26 LPC_AD1

27 +5V 28 LPC_AD2

29 USB_1+ 30 LPC_AD3

31 USB_1- 32 LPC_FRAME#

33 +5V 34 SERIRQ#

35 USB_0+ 36 Reserved

37 USB_0- 38 CLK_33MHz

39 GND 40 GND

SUMIT A Pin Out:

Pin No. Function Pin No. Function

1 GND 2 GND

3 B_PET_P0 4 B_PER_P0

5 B_PET_N0 6 B_PER_N0

7 GND 8 GND

9 C_CLKP 10 B_CLKP

11 C_CLKN 12 B_CLKN

13 CPRSNT#/C_PE_CLKREQ# 14 GND

15 C_PET_P0 16 C_PER_P0

17 C_PET_N0 18 C_PER_N0

19 GND 20 GND

21 C_PET_P1 22 C_PER_P1

23 C_PET_N1 24 C_PER_N1

25 GND 26 GND

27 C_PET_P2 28 C_PER_P2

29 C_PET_N2 30 C_PER_N2

31 GND 32 GND

33 C_PET_P3 34 C_PER_P3

35 C_PET_N3 36 C_PER_N3

37 GND 38 GND

39 PERST# 40 WAKE#

41 Reserved 42 Reserved

43 +5V 44 Reserved

SUMIT B Pin Out:

41 A_PET_P0 42 A_PER_P0

43 A_PET_N0 44 A_PER_N0

45 GND 46 APRSNT#/A_PE_CLKREQ#

47 PERST# 48 A_CLKP

49 WAKE# 50 A_CLKN

51 +5V 52 GND

GETTING TO KNOW YOUR ECS-9000

45 +5V 46 +3.3V

47 +5V 48 +3.3V

49 +5V 50 +3.3V

51 +5V 52 +5V_AUX

2.4.11 Mini PCIe

Standard full length Mini PCIe slot:

Mini PCIe 1

Mini PCIe 2

Mini PCIe 3

Pin No. Function Pin No. Function

51 Reserved 52 +3.3Vaux

49 Reserved 50 GND

47 Reserved 48 +1.5V

45 Reserved 46 Reserved

43 GND 44 Reserved

41 +3.3Vaux 42 Reserved

39 +3.3Vaux 40 GND

37 GND 38 USB_D+

35 GND 36 USB_D-

33 PETp0 34 GND

31 PETn0 32 SMB_DATA

Pin Out:

29 GND 30 SMB_CLK

27 GND 28 +1.5V

25 PERn0 26 GND

23 PERp0 24 +3.3Vaux

21 GND 22 PERST#

19 Reserved 20 reserved

17 Reserved 18 GND

Mechanical Key

15 GND 16 UIM_VPP

13 REFCLK+ 14 UIM_RESET

11 REFCLK- 12 UIM_CLK

9 GND 10 UIM_DATA

7 CLKREQ# 8 UIM_PWR

5 Reserved 6 1.5V

3 Reserved 4 GND

1 WAKE# 2 3.3Vaux

2.4.12 RTC Battery

The system’s real-time clock is powered by a lithium battery. It is equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you do not the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team.

Battery

GETTING TO KNOW YOUR ECS-9000

2.4.13 FAN Header

FAN power connector supports for additional thermal requirements. The pin assignments of FAN 1 are shown in the following diagram:

Pin No. Function Pin No. Function

1 GND 2 +12V (1.5A max)

3 Fan speed sensor 4 Fan PWM

Pin out:

FN1

Pin No. Function Pin No. Function

1 SERIRQ 7 LFRAME#

2 +3.3V 8 LAD0

3 LA3 9 N/C

4 RESET# 10 Ground

5 LAD1 11 CLOCK

6 LAD2 12 Ground

Pin out:

2.4.14 LPC Port 80 Header

The system's provide a LPC Port 80 Header for debug card.

CN37

2.4.15 Speed LED Header

The system's provide a LPC Port 80 Header for debug card.

Pin No. LAN Function

1 LAN3 LINK100#

2 LAN4 LINK100#

3 LAN3 LINK1000#

4 LAN4 LINK1000#

5 LAN3 ACT#

6 LAN4 ACT#

7 LAN3 +3V

8 LAN4 +3V

Pin out:

Pin No. LAN Function

1 LAN5 LINK100#

2 LAN6 LINK100#

3 LAN5 LINK1000#

4 LAN6 LINK1000#

5 LAN5 ACT#

6 LAN6 ACT#

7 LAN5 +3V

8 LAN6 +3V

GETTING TO KNOW YOUR ECS-9000

CN14

JP3

JP7

JP8

JP9

SW1

JP1

JP5JP6JP4

JP2

2.5 Main Board Jumper & Deep Switch Settings

2.5.1 Top View of ECS-9000 With Jumper and Deep Switch

The gure below is the top view of the system board, and it shows the location of the jumpers and the switches.

You may congure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper, you connect the pins with the clip. To “open” a jumper, you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3. In this case you would connect either pins 1 and 2, or 2 and 3.

You may configure your card to match the needs of your application by DIP switch as shown below (the deep switch on and off)

1 2

1 : OFF 2 : OFF

1 2

1 : ON 2 : OFF

1 2

1 : ON 2 : ON

2.5.2 USB Power Jumper

Jumper Setting Function

JP7 2:3 Non Wake Up support

JP7 1:2 Supported Wake Up (Default)

JP7

2.5.3 COM Port RI pin Select

JP3 JP5JP6JP4

Pin Header Pin No. Description

COM1

JP3

1-2 +5V (1A max.)

3-4 +12V (0.5A max.)

5-6

RI (Default)

Pin Header Pin No. Description

COM2

JP4

1-2 +5V (1A max.)

3-4 +12V (0.5A max.)

5-6

RI (Default)

Pin Header Pin No. Description

COM3

JP5

1-2 +5V (1A max.)

3-4 +12V (0.5A max.)

5-6

RI (Default)

GETTING TO KNOW YOUR ECS-9000

Pin Header Pin No. Description

COM4

JP6

1-2 +5V (1A max.)

3-4 +12V (0.5A max.)

5-6

RI (Default)

2.5.5 POE Power ON Select

Jumper Setting Function

JP8 1:2 POE power on at standby power ready

JP8 2:3 POE power on after system power on (Default)

JP8

2.5.6 CMOS & ME Clear

JP1 JP2

Jumper Setting Function

JP1 1:2 *Normal (Default)

JP1 2:3 Clear CMOS

Jumper Setting Function

JP2 1:2 *Normal (Default)

JP2 2:3 Clear ME

2.6 Ignition Control

2.6.1 Adjust Ignition Control Modes

ECS-9000 series provides ignition power control feature for in-vehicle applications. The built-in MCU monitors the ignition signal and turns on/off the system according to pre-dened on/off delay periods.

ECS-9000 series provides 16 modes of different power on/off delay periods adjustable via SW5 switch. The default rotary switch is set to 0 in ATX/ AT power mode.

SW1

GETTING TO KNOW YOUR ECS-9000

The modes are listed in the following table:

Item Power on delay Power off delay Switch Position

0 ATX mode

1 No delay No delay

2 No delay 5 seconds

3 No delay 10 seconds

4 No delay 20 seconds

5 5 seconds 30 seconds

6 5 seconds 60 seconds

7 5 seconds 90 seconds

8 5 seconds 30 minutes

9 5 seconds 1 hour

A 10 seconds 2 hours

B 10 seconds 4 hours

C 10 seconds 6 hours

D 10 seconds 8 hours

E 10 seconds 12 hours

F 10 seconds 24 hours

1 2 3 4

2.6.2 Ignition Control Wiring

To activate ignition control, you need to provide IGN signal via the 3-pin pluggable terminal block located in the back panel. It is below the general wiring conguration.

Pin No. Denition

1 Ignition (IGN)

2 External Power S/W +

3 External Power S/W +

For testing purpose, you can refer to the picture above to simulate ignition signal input controlled by a latching switch.

Note:

1. DC power source and IGN share the same ground.

2. ECS-9000 supports 6V~36V wide range DC power input in ATX/AT mode. In

Ignition mode, the input voltage is xed to 12V/24V for car battery scenario.

3. For proper ignition control, the power button setting should be “Power down”

mode.

In Windows, for example, you need to set “When I press the power button” to "Shut down."

IGN

V+

HARDWARE INSTALLATION

SYSTEM SETUP

3.1 How to Open Your ECS-9000

3.1.1 ECS-9000-R Series

Step 1

Remove front panel six KHS#6-32 screws then pick up front panel.

Step 2

Remove rear panel ve KHS#6-32 screws.

Step 4

Finish.

Step 3

Remove bottom four F#6-32 screws.

HARDWARE INSTALLATION

3.1.2 ECS-9000-F/ G/ PoE Serise

Step 1

Remove front panel six KHS#6-32 screws then pick up front panel.

Step 2

Remove rear panel ve KHS#6-32 screws.

Step 4

Finish.

Step 3

Remove bottom four F#6-32(red) and one F-M3(yellow) screws.

HARDWARE INSTALLATION

3.2 Installing CPU

Step 1 Remove one F #6-32 and pick up chock bracket.

Step 2 Remove eleven PH-M3 screws and pick up mother board.

Step 4 Open CPU slot. (Be careful CPU pin)

Step 3 CPU slot.

HARDWARE INSTALLATION

Step 6 Finish.

Step 5 Installing CPU on the slot.

Step 7 Close CPU slot and nish.

3.3 Installing DDR4 SO-DIMM Modules

Step 1 Install DDR4 RAM module into SO-DIMM slot.

Step 2 Make sure the RAM module is locked by the memory slot.

HARDWARE INSTALLATION

3.4 Installing Mini PCIe Card

Step 1 Install Mini PCIe card into the Mini PCIe socket.

Step 2 Fasten one M2.5 screw.

3.5 Installing Antenna Cable

Step 1 Check antenna cable and washers.

Step 2

Put Antenna cable connector into the hole on rear panel and fasten the washer 1, washer 2 and washer 3 on Antenna cable connector.

HARDWARE INSTALLATION

3.6 Installing CFast Card

Step 2 Remove CFast Card and SIM Card cover.

Step 1 Remove two F-M3x4 screws on CFast Card and SIM Card cover

from the front panel.

Step 4 Insert CFast card and push to lock.

Step 5 Finish.

Step 3

Before Inserting CFast & SIM Card, make sure the system power is not plugged.

HARDWARE INSTALLATION

3.7 Installing SIM Card

Step 2 Remove CFast Card and SIM Card cover.

Step 1 Remove two F-M3x4 screws on CFast Card and SIM Card cover

from the front panel.

Step 4 Insert SIM card and push to lock.

Step 5 Finish.

Step 3

Before Inserting CFast & SIM Card, make sure the system power is not plugged.

HARDWARE INSTALLATION

3.8 Installing SSD/ HDD

Step 1 SSD/HDD tray.

3.8.1 ECS-9000-R Series

Step 2 Use the trigger and open SSD/HDD tray.

Step 3 Installing 2.5” SSD/HDD into the tray.

Step 4 Lock the SSD/HDD tray with key.

HARDWARE INSTALLATION

3.8.2 ECS-9000-F/ G/ PoE Series

Step 2 Install SSD/HDD with HDD bracket.

Step 1 Remove F-M3 screw.

Step 3 Lock KH-M3 screw. (One SSD/HDD with four KH-M3 screws)

Step 4 Installing power and SATA cable with SSD/HDD.

HARDWARE INSTALLATION

3.9 Installing M2DOM

Step 2 M2DOM module.

Step 1 M2DOM slot.

Step 3 Install M2DOM module with slot.

Step 4 Lock two M2 screws with slot.

HARDWARE INSTALLATION

3.10 Mounting Your ECS-9000

Step 1 Ensure the screw holes on the right and left side of the upper case match the ones on ECS-9000 wall mount bracket.

3.10.1 Wall Mount Bracket

Step 2 Fasten 4pcs KHS#6-32 screws then nish.

HARDWARE INSTALLATION

3.10.2 VESA Mount

Step 1 ECS-9000 and VESA Mount.

Step 2

Take ECS-9000 and VESA Mount with fasten four KHS#6-32 screws

Step 3 Fasten four KHS#6-32 screws and then nish.

Step 4 Finish.

Step 5 VESA size have 75x75mm(red) and 100x100mm(yellow).

HARDWARE INSTALLATION

3.10.3 Din Rail Kit

Step 1 ECS-9000 and Din Rail Kit.

Step 2

Take ECS-9000 and VESA Mount with fasten four KHS#6-32 screws

Step 3 Fasten four KHS#6-32 screws and then nish.

Step 4 Finish.

Step 5 ECS-9000 With Din Rail.

BIOS AND DRIVER SETTING

BIOS SETUP

4.1 BIOS Settings

BIOS provides an interface for users to check and change system conguration. The BIOS setup program is accessed by pressing the <Del> key when POST display output is shown.

Figure 4-1: Entering Setup Screen

4.2 Main

The main menu displays BIOS version and system information. There are two options on the main menu, system date and system time.

System Date

Set the date. Use <Tab> to switch between date elements.

System Time

Set the time. Use <Tab> to switch between time elements.

Figure 4-2: BIOS Main Menu

4.3 Advanced

Figure 4 3: BIOS Advanced Menu

Select advanced tab to enter advanced BIOS setup options, such as CPU conguration, SATA conguration, and USB conguration.

BIOS AND DRIVER SETTING

4.3.1 ACPI Settings

Enable Hibernation

Enables or disables system's ability to hibernate (OS/S4 sleep state). This option may not be effective with some OS.

ACPI Sleep State

Selects the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.

S3 Video Repost

Enables or disables S3 video repost.

ACPI Low Power S0 Idle

Enables or disables ACPI low power S0 idle support.

Figure 4 3-1: ACPI Settings

4.3.2 AMT Conguration

Intel AMT

Enables/disables Intel (R) Active Management Technology BIOS extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional rmware in the SPI device.

Figure 4 3-2: Intel AMT Settings

4.3.3 PCH-FW Conguration

ME Uncong on RTC Clear State

Disabling this option will cause ME not to uncongure on RTC clear.

ME State

Set ME to Soft temporarily disabled.

Figure 4 3-3: PCH-FW Settings

4.3.4 SMART Settings

SMART Self Test

Run SMART self test on all HDDs during POST.

Figure 4 3-4: SMART Settings

4.3.5 IT8786 Super IO Conguration

Figure 4-3-5: Super IO Settings

Serial Port 1 Conguration

Set parameters of serial port 1 (COM1).

Serial Port 2 Conguration

Set parameters of serial port 2 (COM2).

BIOS AND DRIVER SETTING

4.3.7 Serial Port Console Redirection

Console Redirection

Console redirection enable or disable.

Console Redirection Settings

These settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.

Figure 4 3-7: Serial Port Console Redirection Settings

4.3.6 Hardware Monitor

The IT8786 SIO features an enhanced hardware monitor providing thermal, fan speed, and system voltages' status monitoring.

Figure 4 3-6: Hardware Monitor Settings

Serial Port 3 Conguration

Set parameters of serial port 3 (COM3).

Serial Port 4 Conguration

Set parameters of serial port 4 (COM4).

Hyper-threading

Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and disabled for other OS (OS not optimized for Hyper-Threading Technology). When disabled, only one thread per core is enabled.

Active Processor Cores

Number of cores to enable in each processor package.

Intel Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

Hardware Prefetcher

To turn on/off the MLC streamer prefetcher.

Adjacent Cache Line Prefetch

To turn on/off prefetching of adjacent cache lines.

CPU AES

Enable/disable CPU Advanced Encryption Standard instructions.

Boot performance mode

Select the performance state that the BIOS will set before OS handoff.

Intel(R) SpeedStep(tm)

Allows more than two frequency ranges to be supported.

Turbo Mode

Turbo Mode.

4.3.8 CPU Conguration

Figure 4 3-8: CPU Function Settings

BIOS AND DRIVER SETTING

4.3.9 Intel TXT Information

Display Intel TXT information.

Figure 4 3-9: Intel TXT Information

4.3.10 SATA Conguration

Figure 4 3-10: SATA Devices Settings

CPU C state

Enable or disable CPU C states.

Enhanced C-states

Enable/disable C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State.

Package C State limit

Package C State limit.

Intel TXT(LT) Support

Enables or disables Intel (R) TXT (LT) support.

SATA Controller(s)

Enable or disable SATA Device.

SATA Mode Selection

Determines how SATA controller(s) operate.

Software Feature Mask Conguration

RAID OROM/RST driver will refer to the SWFM configuration to enable or disable the storage features.

Aggressive LPM Support

Enable PCH to aggressively enter link power state.

SATA Controller Speed

Indicates the maximum speed the SATA controller can support.

Options for each SATA port

Port 0

Enable or disable SATA Port.

SATA Device Type

Identies that the SATA port is connected to solid state drive or hard disk drive.

4.3.11 Acoustic Management Conguration

Acoustic Management Conguration

Option to enable or disable automatic acoustic management.

Figure 4 3-11: Acoustic Management Settings

BIOS AND DRIVER SETTING

4.3.12 CSM Conguration

CSM Support

Enable/disable CSM support

GateA20 Active

UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow GA20 to be disabled; this option is useful when any RT code is executed above 1MB.

Option ROM Messages

Set display mode for Option ROM.

INT19 Trap Response

BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE - execute the trap right away; POSTPONED - execute the trap during legacy boot.

Boot option lter

This option controls Legacy/UEFI ROM's priority.

Network

Controls the execution of UEFI and Legacy PXE OpROM.

Storage

Controls the execution of UEFI and Legacy Storage OpROM.

Video

Allows more than two frequency ranges to be supported.

Other PCI devices

Determines OpROM execution policy for devices other than network, storage, or video.

Figure 4 3-12: CSM Settings

Vecow ECS-9000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual