Vecima Networks TR2126SE User Manual

MDS/MMDS Transceiver
TR2126SE

INSTALLATION AND OPERATION
GUIDE FOR SYSTEM OPERATORS

Proprietary to WaveCom Electronics Inc.

All rights reserved.

No part of this publication may by reproduced in any form or by any means or used to make any derivative work (such as translation,

transformation or adaptation) without written permission from WaveCom Electronics Inc.

WaveCom Electronics Inc. reserves the right to revise this publication and to make changes in content from time to time without obligation

on the part of WaveCom Electronics Inc. to provide notification of such revision or change.

WaveCom Electronics Inc. provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. WaveCom Electronics Inc. may make improvements or
changes in the product(s) described in this manual at any time.

TR2126SE Manual; ml_tr2126se_04 (May 2003); Approved: C.H.

Specifications subject to change without notice — Printed in Canada

WaveCom Electronics Inc

TR2126SE Manual; ml_tr2126se_04 (May 2003)

Approved: C.H.

ii

Thank-you for purchasing this product and

welcome to WaveCom!

You have chosen an innovative solution from a leading
technology design center in the ongoing TV & data delivery
revolution.

No doubt you’ve been thinking that the future of your television delivery system includes new technologies

such as Digital TV, Internet Over Cable, Wireless Cable. By selecting WaveCom, you are benefiting from

the same design powerhouse that since 1988 has created custom RF and digital products for technology
leaders such as AT&T, Cisco Systems, Cogeco, Comcast, and Cox Communications.

WaveCom designs and manufactures:

✔

✔Agile CATV Modulators ✔✔✔✔256 QAM Upconverters ✔✔✔✔Digital Video Modulators

✔✔
✔

✔Frequency Translators ✔✔✔✔Spread Spectrum Devices ✔✔✔✔Off-Air Demodulators

✔✔
✔

✔Video-On-Demand Products ✔✔✔✔Wireless Cable MMDS ✔✔✔✔Wireless Cable LMDS

✔✔
✔

✔Frequency Stackers ✔✔✔✔MMDS Transceivers ✔✔✔✔Satellite Receivers

✔✔

and more! Designs to fill the market needs of the CATV industry – both foreign and domestic.

For additional product or corporate information, contact us:

On the web at: www.WaveCom.ca
By sending email to: [e-mail]
By telephone: [phone]
By fax: [phone]
By snail mail: WaveCom Electronics Inc.

150 Cardinal Place
Saskatoon, SK Canada S7L 6H7

is to be a leading worldwide designer and manufacturer of state­of-the-art communications equipment and components. Through
the remarkable success of our customers and business partners,

WaveCom's Corporate M andate

WaveCom innovations are achieving this goal.

WaveCom Electronics Inc

TR2126SE Manual; ml_tr2126se_04 (May 2003)

Approved: C.H.

iii

SAFETY PRECAUTIONS

1. Before installing and operating this equipment, read all Safety, Installation and Operating sections. Retain
this manual for future reference.

2. Follow all instructions — Failure to do so may result in damage to the unit or severe personal injury.

3. Servicing should not be attempted by the user. There are no user serviceable parts inside. Refer all
servicing to factory qualified personnel.

4. Shock Hazard — An electrical shock hazard exists when the chassis cover is removed as is required to set
internal controls. Always disconnect power from the unit before removing the cover.

5. Cleaning — Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
CAUTION: To comply with FCC RF exposure requirements in section 1.1307, a minimum separation

distance of 1.5 meters is required between this antenna and all persons.

LES PRÉCAUTIONS DE SÉCURITÉ

1. Avant d'installer ou d'opérer cet équipement, lisez, toutes les sections de sécurités, d'installations et
d'opérations. Gardez ce manuel comme source de référence.

2. Suivez toutes instructions - si non, vous risquez d'endommager la machine ou de vous blesser
sérieusement.

3. N'essayez, pas de réparer cet équipement vous même. Référez toutes revisions nécessaire au personnel
qualifié de la manufacture.

4. Risque de choc - Il y a un risque de décharge électrique qui existe quand la couverture du châssis est
enlevée, comme est nécessaire pour ajuster les contrôlcs internes. Il faut toujours couper l'électricité avant
d'enlever le couvercle pour faire aucun ajustage.

5. Le nettoyage - n'utilisez pas de nettoyeurs aérosols ou liquides. Utilisez un tissu humide pour nettoyer.

Attention Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage du

foudre.

☛ Important Installation Instructions

CAUTI ON: To comply with FCC RF exposure requirements in section

1.1307, a minimum separation di stance of 1.5 meters is required between
this antenna and all persons.

WaveCom Electronics Inc

TR2126SE Manual; ml_tr2126se_04 (May 2003)

Approved: C.H.

iv

INDEX

1.0 GENERAL INFORMATION ....................................................................................................... 6

1.1 Functional Overview..............................................................................................................................6

1.2 Module Features.....................................................................................................................................6

1.3 Specifications..........................................................................................................................................7

2.0 INSTALLATION.......................................................................................................................... 8

2.1 Unpacking the Unit................................................................................................................................8

2.2 Mounting the Unit..................................................................................................................................8

2.2.1 Mounting the TR2126SE...................................................................................................................................8

2.2.2 Mounting the Antenna.......................................................................................................................................9

2.3 Connection to the Antenna..................................................................................................................10

2.4 Connection to the Power Inserter and Cable Modem.......................................................................11

2.5 Waterproofing Connections................................................................................................................12

3.0 TUNING THE ANTENNA ........................................................................................................ 14

3.1 Preparation for Tuning.......................................................................................................................14

3.2 Signal Strength and Alignment...........................................................................................................14

3.3 Resetting the Beeper ............................................................................................................................14

4.0 WARRANTY STATEMENT AND SERVICE POLICY .......................................................... 15

4.1 Warranty Statement............................................................................................................................15

4.2 Service Policies: How to Return an Item for Service:.......................................................................15

4.3 Repair Charges and Warranty Exemptions......................................................................................16

WaveCom Electronics Inc

TR2126SE Manual; ml_tr2126se_04 (May 2003)

Approved: C.H.

v

1.0 GENERAL INFORMATION

1.1 Functional Overview

The WaveCom TR2126SE is an MDS/MMDS Transceiver for use in wireless systems. The TR2126SE

integrates an LNA, downconverter, upconverter, power amplifier, RF and IF diplexers to provide a one-box
solution for two-way wireless RF communications. The TR2126SE and antenna are situated outdoors and
connected to a cable modem indoors by standard RG-59 cable. A single RF connector on the weatherproofed
enclosure provides the interface to the transmit/receive antenna for rapid setup. The Transceiver is
configured to work with standard cable modem frequency plans and levels, permitting direct connection. The
Transceiver also includes an RF mute function to reduce power consumption and broadband noise emissions.

1.2 Module Features

• +27 dBm output for high reverse channel system gain

• Microprocessor controlled gain compensation over temperature

• Low Phase Noise

• Automatic transmit RF mute (transmits only when an IF signal is present)

• Fully weatherized unit, suitable for outdoor mounting

• Audible self install indicator (optional feature)

WaveCom Electronics Inc

TR2126SE Manual; ml_tr2126se_04 (May 2003)

Approved: C.H.

6