VCON Development Kit
ViGO:
– Pentium II 350Mhz PC
– Windows 98, ME, 2000, XP
– 100MB available disk space
– 64MB Memory for 98, ME, 2000
– 128MB Memory for XP
– Direct Draw Support (2MB VRAM)
Monitor 1000/3000:
– Pentium III 1Ghz
– Windows 98, ME, 2000, NT, XP
– 100MB available disk space
– 256MB Memory
– Direct Draw Support (2MB VRAM)
Escort/Cruiser:
– Pentium 200 MHz with PCI bus
– 64MB RAM
– 100MB available disk space
– PCI SVGA card or chip that supports
DirectDraw with 2M VRAM
– Windows 98, NT, 2000, ME, XP
– No support for PCs configured with
dual processors
ISDN.OCX
ISDN conversation control.
(Point to Point only).
The ISDN OCX controls both the
telephony connection (based on TAPI)
and the videoconferencing synchroniza
tion based on the H.320 standard.
MCU.OCX
ISDN multipoint conference control.
The MCU OCX includes MCU chair
control capabilities, participant list
management and more.
LAN.OCX
LAN conversation control.
(Point to Point and Multicast).
The LAN OCX controls IP telephony
connection and videoconferencing
synchronization based on the H.323
standard. The LAN OCX also includes
Interactive Multicast chair control and
participant list management capabilities.
Audio.OCX
Audio control for desktop system
quality based products.
The Audio OCX controls the volume
level, active audio device, audio muting
and more.
Video.OCX
Video control for VGA based
products.
The Video OCX controls the display mode
(Local/Remote), the display settings
(contrast/brightness/color) and the video
quality.
Data.OCX
Data control.
The Data OCX is based on Microsoft
NetMeeting
TM
and it supports operations
such as whiteboard, file transfer and
application sharing.
Camera.OCX
Camera control.
The Camera OCX controls Local and
Remote Pan-Tilt-Zoom cameras.
MonAudio.OCX
Audio control for high quality
based products.
The Monitor Audio OCX controls the
speakers’ volume level, microphone input
gain and the audio quality.
MonVideo.OCX
Video control for TV monitor
based products.
The MonVideo OCX controls the display
mode (local/remote/PIP), the display
settings (contrast/brightness/color) and
the video quality.
Config.OCX
Configuration control.
The Configuration OCX enables the
MXM server to control the end point
characteristics and allows the end point
to send requests to the MXM server for
on line configuration changes.
Network.OCX
Network control.
The Network OCX includes PBX
functionality such as call transfer,
call forward, call pick-up and ad-hoc
conferencing.
Record.OCX
Record control.
The Record OCX enables to record,
playback and send .AVI files via e-mail
format (VIGO only).
Directory.OCX
Directory Server control.
The Directory OCX controls the ILS
on-line directory service.
Minimum PC Requirements
©2004 VCON. All rights reserved.
DOC 11021 Rev. 8 02/03
OCXs included in the VDK
OCX Validity
Mon Mon
OCX Type: ISDN MCU LAN Audio Video Data Camera Audio Video Config Network Record Directory
Escort - - + + + + + - - + + - +
ViGO - - + - + + + + - + + + +
Cruiser 150 + + + + + + + - - + + - +
Cruiser 384 + + + - + + + + - + + - +
Monitor 1000 + + + - - + + + + + + - +
Monitor 3000 + + + - - + + + + + + - +
VCON Headquarters
Tel: +972 9 959 0059
Fax: +972 9 956 7244
VCON Americas
Tel: +1 512 583 7700
Fax: +1 512 583 7701
VCON Europe
Tel: +49 89 614 57 0
Fax: +49 89 614 57 399
VCON China
Tel: +86 10 65269791
Fax: +86 10 65269790
www.vcon com