COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT
1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT
E
INSTRUCTIONS MANUAL
5
Thank you for purchasing VBC Racing product.
This VBC Racing kit is a high performance, racing grade car kit
intended for experienced racers. The kit compose of VBC
formulated composite materials, top quality full carbon fiber
chassis and high grade 7075 material which will give you a
competitive edge over the others.
Novice racer should seek advice from more experienced racer
before assembly.
Always keep this instruction manual handy at all times for quick
reference even after completing the assembly.
Before your assembly, sand the chassis edges.
Things that we should remind you.
Sand the chassis edges with #600 sand paper and apply CA
glue to the edges and counter sink holes.
Need help or support.
If you need help or you would like to leave us a comment,
please email to our support team: support@vbc-racing.com or
visit our web site www.vbcracing.com
BAG MARKED
STEP1
1
Graphite Edges Protection Procedure
01© VBC Racing LIGHTNING FX
CA
Sand the chassis edges with #600 sand paper(not included) and
apply CA glue(not included) to the edges of the chassis.
Sand the below graphite edges with #600 sand paper and apply CA glue to the edges.
*Not included in this kit
A-01-P50625 Lightning FX Main Chassis
A-01-P50603 Lightning FX Lower Pod Plate
BAG MARKED
2
02© VBC Racing LIGHTNING FX
Pivot Brace (bottom) A-03-VBC-5007 x 1
Pivot Brace (cover) A-03-VBC-5008 x 1
Pivot Balls A-03-VBC-1027 x 5
M3x6 Flathead C-02-SC-F0306 x 5
Pivot ball shoulder should be facing downwards
Pivot Brace Assembly Part1
STEP2-3
Pivot Brace (bottom)
Pivot Brace (cover)
M2x6 Cap Head
M3x6 Flathead
M3x6 Flathead
Pivot Balls
Pivot Balls
Pivot Balls
Pivot Balls
Use screws to adjust the
play of the piviot ball movement. Do not
overtighten to avoid stripping
M2x6 Cap Head C-02-SC-R2.0x6 x 2
M3x6 Flathead
M3x6 Flathead
M3x10 Flathead
M3x10 Flathead
M3 Lock Nut
M3 Lock Nut
LightningF V2 Main Chassis
LightningF V2 Lower Pod Plate
M3x10 Flathead C-02-SC-F0310 x 2
M3 Locknut C-02-SC-NN03 x 2
BAG MARKED
03© VBC Racing LIGHTNING FX
M2x6 Cap Head C-02-SC-R2.0x6 x 4
Pivot Brace Assembly Part2
STEP2-3
2
03
Tighten each side screw
slowly, Make sure the lower pod
plate can rotate freely.
Lightning Pod Link Set
A-03-VBC-5009 x 2
LightningF Al7075 Motor Mount B-02-VBC-5128
LightningF Al7075 Left Bulkhead B-02-VBC-5129
Rear Bulkhead Assembly Part1
3
LightningF Al7075 Motor Mount
LightningF Al7075 Left Bulkhead
M3x6 Flathead
M3x6 Flathead
M3x6 Flathead
M3x6 Flathead
M3x6 Flathead C-02-SC-F0306 x 4
M3x6 Flathead
M3x6 Flathead C-02-SC-F0306 x 1
Note the direction screw in from
the larger hole side
04
© VBC Racing LIGHTNING FX
BAG MARKED
STEP2-3
Rear Bulkhead Assembly Part2
M3x6 Roundhead C-02-SC-R0306 x 6
Rear Wing Mount B-02-VBC-5132 x 2
LightningF Rear Motor Mount Brace A-01-VBC-5130 x 1
Rear Wing Mount B-02-VBC-5132
Rear Wing Mount B-02-VBC-5132
LightningF Rear Motor Mount Brace A-01-VBC-5130
3
M3x6 Roundhead
M3x6 Roundhead
M3x6 Roundhead
M3x6 Roundhead
M3x6 Roundhead
M3x6 Roundhead
BAG MARKED
05
© VBC Racing LIGHTNING FX
Side Spring (Soft/Silver) A-03-VBC-1047 x 2
4.7mm Ball Nuts B-02-VBC-5020 x 2
Aluminum Side Spring Retainer B-02-VBC-5074 x 2
M3x8 Set Screw C-02-SC-SS-0308 x 2
M3x6 Roundhead C-02-SC-R0306 x 6
4
05
17mm Aluminum Standoff B-02-VBC-5005 x 2
Lightning FX Rear Chassis Brace A-01-P50616 x 1
4.7mm Ball Nuts
M3x6 Roundhead
OPTIONAL SIDE SPRINGS SET :
Side Spring (Soft/Silver)
Side Spring (Medium/Gold)
Side Spring (Hard/Black)
(A-03-VBC-1047)
M3x8 Set Screw
Rear Chassis Brace Assembly
STEP4-5
M3x6 FlatheadM3x6 Flathead
M3x6 Flathead Screw C-02-SC-F0306 x 2
17mm Aluminum Standoff
Between height
approx 1.7mm
M3x8 Set Screw
M3x6 Roundhead
M3x6 Roundhead
Lightning Body Post
Lightning Body Post
Aluminum Side Spring Retainer
Aluminum Side Spring Retainer
Side Spring (Soft/Silver)
Side Spring (Soft/Silver)
M3x6 Roundhead
M3x6 Roundhead
Lightning Body Post A-03-VBC-5010 x 2
BAG MARKED
STEP4-5
Side Damper Tube Assembly
06
© VBC Racing LIGHTNING FX
T2 7075 Spacer B-02-VBC-0019-20 x 1
M3x6 Roundhead C-02-SC-R0306 x 4
Lightning Damper Tube Shaft B-02-VBC-5018 x 2
Turnnuckle Cup (Short) A-03-VBC-5021 x 4
Lightning Damper Tube B-02-VBC-5019 x 2
Lightning Damper Tube Shaft Set
Turnbuckle Cup (Short)
Turnbuckle Cup (Short)
5
T2 7075 Spacer
M3x6 Roundhead
4.7mm Ball Nuts
M3x6 Roundhead
M3x6 Roundhead
Lightning FX Upper Pod Plate A-01-P50624 x 1
M3x8 Flathead
Friction Grease
Ball Connector B-02-VBC-0045 x 1
Ball Connector
Make Two
M3x10 Flathead C-02-SC-F0310 x 2
Loading...