VBC Racing Lightning 10M 235 Instruction Manual

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT

1/10 SCALE ELECTRIC COMPETITION CAR KIT

E

INSTRUCTIONS MANUAL

5

Thank you for purchasing VBC Racing product.

This VBC Racing kit is a high performance, racing grade car kit
intended for experienced racers. The kit compose of VBC
formulated composite materials, top quality full carbon fiber
chassis and high grade 7075 material which will give you a
competitive edge over the others.
Novice racer should seek advice from more experienced racer
before assembly.
Always keep this instruction manual handy at all times for quick
reference even after completing the assembly.

Before your assembly, sand the chassis edges.

Things that we should remind you.

Sand the chassis edges with #600 sand paper and apply CA
glue to the edges and counter sink holes.

Need help or support.

If you need help or you would like to leave us a comment,
please email to our support team: [e-mail] or
visit our web site www.vbcracing.com

BAG MARKED

STEP1

1

Graphite Edges Protection Procedure

01© VBC Racing LIGHTNING10M235

CA

Sand the chassis edges with #600 sand paper(not included) and
apply CA glue(not included) to the edges of the chassis.

Sand the below graphite edges with #600 sand paper and apply CA glue to the edges.

*Not included in this kit

A-01-P51395 Lightning10M 2.5mm Graphite Main Chassis

A-01-P51398 Lightning10M Rear Tweak Plate

A-01-P51396 Lightning10M 235 Graphite Lower Pod Plate

BAG MARKED

02© VBC Racing LIGHTNING10M235

Pivot Brace D-05-VBC-0101 x 1

Pivot Brace Cover D-05-VBC-0101 x 1

Pivot Balls A-03-VBC-1027 x 5

M3x6 Flathead C-02-SC-F0306 x 5

Pivot ball shoulder should be facing downwards

Pivot Brace

Pivot Brace Cover

M2x6 Cap Head

Use screws to adjust the
play of the piviot ball Movement. Do not
overtighten to avoid stripping

M2x6 Cap Head C-02-SC-R2.0x6 x 2

STEP2-5

02

2

Pivot Brace Assembly Part 1

M3x6 Flathead

Pivot Balls

Pivot Balls

BAG MARKED

03© VBC Racing LIGHTNING10M235

M3x10 Flathead C-02-SC-F0310 x 2

M2x6 Cap Head C-02-SC-R2.0x6 x 4

Pivot Brace Assembly Part2

STEP2-5

Lightning Pod Link Set

2

Rear Bulkhead Assembly Part1

3

M3 Locknut C-02-SC-NN03 x 2

Tighten each side screw
slowly, Make sure the lower pod
plate can rotate freely.

03

Note the direction screw in from
the larger hole side

03

M2x6 Cap Head

M2x6 Cap Head

M3x10 Flathead

M3x10 Flathead

M2x6 Cap Head

M2x6 Cap Head

M3 Locknut

M3 Locknut

Lightning Pod Link Set

Make sure direction

Make sure direction

Make sure direction

Make sure direction

M3x6 Flathead

M3x6 Flathead

04

© VBC Racing LIGHTNING10M235

BAG MARKED

STEP2-5

3

4

M3x6 Flathead C-02-SC-F0306 x 2

Chassis Brace Assembly

14mm Aluminum Standoff B-02-VBC-5073 x 2

Side Spring (Medium/Gold) A-03-VBC-1047 x 2

Aluminium Side Spring Retainer B-02-VBC-5074 x 2

M3x6 Roundhead C-02-SC-R0306 x 2

M3x8 Set Screw C-02-SC-SS-0308 x 2

A-01-P51398 Lightning10M Rear Tweak Plate

Aluminium Side Spring Retainer

Aluminium Side Spring Retainer

M3x6 Roundhead

M3x6 Roundhead

M3x8 Set Screw

M3x8 Set Screw

Side Spring

Side Spring

BAG MARKED

05

© VBC Racing LIGHTNING10M235

4

05

STEP2-5

Lightning 10M235 Graphite Rear Shock Mount A-01-P51397 x 1

BAG MARKED

STEP2-5

06

© VBC Racing LIGHTNING10M235

5

06

M3x6 Roundhead C-02-SC-R0306 x 2

M3x6 Roundhead

M3x6 Roundhead

BAG MARKED

STEP6

07

© VBC Racing LIGHTNING10M235

M2.5x4 Roundhead C-02-SC-R2504 x 4

Ball Connector 4.7x12mm A-02-VBC-5015 x 2

Lightning12 Front Axle B-02-VBC-5060 x 2

Pivot Ball B-02-VBC-5068 x 4

M3x15mm Turnbuckle, Black A-02-VBC-5053 x 2

Lightning12 Front Upper Arm Eyelet
A-02-VBC-5092 x 2

M3x10 Roundhead C-02-SC-R0310 x 4

M3x12 Flathead C-02-SC-F0312 x 4

Lightning12 Front Upper Arm Spacer, 1.5mm
A-01-VBC-5048 x 2

M3.3x0.4 Kingpin Shim C-02-VBC-5069 x 22

Lightning12 Kingpin C-02-VBC-5044 x 2

Front Spring (Medium/Gold) C-02-VBC-5042 x 2

6

M2.5x4 Roundhead

Ball Connector 4.7x12mm

Lightning Front Axle

Pivot Ball

Lightning12 Front Upper Arm Eyelet

M3x15mm Turnbuckle, Black

Lightning12 Front Upper Arm

Pivot Ball

Lightning10 ALU7075 Steering Knuckle

Lightning12 Front Lower Arm
A-02-VBC-5067

Lightning12 Front Upper
Arm Spacer, 1.5mm

Lightning12 Aluminum Upper Arm Mount

Lightning12 Aluminum

Front Bulkhead, Right

M3x12 Flathead

M3x10 Roundhead

Make Two (Leff And Right Side)

M3.3x0.4 Kingpin Shim

M2x8 Caphead C-02-SC-R2.0x8 x 2

Lightning12 Kingpin

Front Spring
(Medium/Gold)

M3.3x0.4 Kingpin Shim x 3

M3.3x0.4 Kingpin Shim x 7

M2.5x4 Roundhead

10

5

0

Note : 10 Is The Standard Setup

Note : Lower arm in the same direction,
dot marking should be facing up

<< Front >>

<< Rear >>

Dot Marking

Dot Marking

M2x8 Caphead
Note : Tighten the screw slowly to
adjust the pivot ball movement

Upper Arm Mount Active Caster Setup

OPTIONAL FRONT SPRINGS :
Front Spring (Soft/Silver) C-02-VBC-5041
Front Spring (Hard/Black) C-02-VBC-5043

OPTIONAL FRONT UPPER ARM SPACER SET :

0.5mm/1.0mm Adjust Spacer
(D-05-VBC-0109)

07

Please note the direction of

the Upper Arm Eyelet as they

are offset.

3.5mm

M2.5 x 6 x 0.5 Spacer C02P50259 x 2

M2.5 x 6 x 0.5 Spacer

M3x3 Set Screw C-02-SC-SS-0303 x 2

OPTIONAL LIGHTNING FRONT AXLE :
Lightning Inline Front Axle C-02-P50211

M3x3 Set Screw

BAG MARKED

STEP6

08

© VBC Racing LIGHTNING10M235

Lightning Height Adjust Spacer, 1.5mm
A-01-VBC-5045 x 2

Front Suspension Assembly

6

1.80

1.2mm Spacer

0.8mm Spacer

No Spacer

3.25

6.15

Caster Adjustments

M2x4 Roundhead Screw C-02-SC-R0204 x 2

2mm Upper Hinge Pin C-02-VBC-5054 x 2

Caster Spacer, 0.8mm D-05-VBC-0110 x 2

M3x2mm Set Screw C-02-SC-SS-0302 x 2

Lightning10 Front Hinge Brace A-01-G50229 x 1

Caster Spacer, 1.2mm D-05-VBC-0110 x 2

M3x2mm Set Screw

Caster Spacer,

1.2mm

Caster Spacer,

0.8mm

2mm Upper Hinge Pin

M2x4 Roundhead Screw

OPTIONAL HEIGHT ADJUST SPACER SET :

0.5mm/1.0mm Height Adjuster Spacer
(D-05-VBC-0108)

2mm Upper Hinge Pin

M2x4 Roundhead Screw

M3x2mm Set Screw

Caster Spacer,

1.2mm

Caster Spacer,

0.8mm

M3x8 Roundhead C-02-SC-R0308 x 4

M3x8 Roundhead

M3x8 Roundhead

4

BAG MARKED

STEP7

Ball Differential Assembly

09

© VBC Racing LIGHTNING10M235

Differental Drive Ring B-02-VBC-1001 x 2

Thrust Cone B-02-VBC-5081 x 1

7

Differential Seal O-ring B-02-VBC-5082 x 2

Ball Bearing 3/8”x1/4” C-02-BB-3814 x 1

Bevelled Washer C-02-VBC-5076 x 3

64 Pitch 88T Spur Gear A-03-P50232 x 1

Ball Bearing Flanged 3/8”x1/4”
C-02-BB-3814F x 4

Differential Seal O-ring

Lightning10M235 Steel Rear Axle C-02-G51410 x 1

Ball Bearing Flanged 3/8”x1/4”

Differental Drive Ring

64 Pitch 88T Spur Gear A-03-P50232

1/8” Differential Balls

1/8” Differential Balls C-02-DB-0801S x 16

Ball Bearing 3/8”x1/4”

Lightning10 Rear Diff Hub

B-02-P50214

Ball Bearing Flanged 3/8”x1/4”

Thrust Cone

Bevelled Washers

M4 Nylon Nut

Bevelled Washers
Note : The Direction Of Washers

Diff Grease

M4 Nylon Nuts A-02-VBC-5075 x1

Differental Drive Ring

Differential Seal O-ring

64 Pitch 88T Spur Gear

Ball Bearing Flanged 3/8”x1/4”

Ball Bearing Flanged
3/8”x1/4”

Ball Bearing Flanged 3/8”x1/4”

Ride Height 3.0mm Spacer A-01-P51399 x 4

Lightning 12M Rear Hub Axle Housing B-02-P50666 x 2

Lightning10M235 Carbon Cross Tube A01P51401 x 1

BAG MARKED

STEP7-8

10

© VBC Racing LIGHTNING10M235

M2.5x8 Cap Head Screw C-02-SC-R2508 x 2

7

Ball Differential Assembly

Lightning10 Left Rear Wheel Hub B-02-P50213 x 1

8

Servo And Top Plate Assembly

M3x6x0.5mm Spacer B-02-VBC-5093 x 4

M3x8 Roundhead C-02-SC-R0308 x 4

3 Difference Servo Adaptor
For Sanwa/KO [A) /Futaba [F] /JR/Hitec [H]

Servo Saver Set

Turnbuckle Cup (Long)

3x52mm Hardened SpringSteel Turnbuckle

Turnbuckle Cup (Long)

M3x6x0.5mm Spacer

M3x6x0.5mm Spacer

M3x8 Roundhead

M3x8 Roundhead

Alum Servo Mount

Ball Connector 4.7x17mm

M3 Locknut

Make sure the screw is
correct for your servo

Optional : Tie Rod Wrench Set D-05-VBC-0048

SERVO IS NOT INCLUDED

M3 Locknut C-02-SC-NN03 x 2

Servo Saver Set B-03-VBC-5017 x1

T1 7075 Spacer B-02-VBC-0019-10 x 2

T1 7075 Spacer

Alum Servo Mount for Low Profile Servo B-02-P50262

Ball Connector 4.7x17mm A-02-VBC-5092 x 2

T2 7075 Spacer B-02-VBC-0019-20 x 4

Servo Spacer 2mm A-03-VBC-0033 x 2

Servo Spacer 1mm A-03-VBC-0032 x 2

Servo Spacer 1mm

Servo Spacer 1mm

Servo Spacer 2mm

Servo Spacer 2mm

T2 7075 Spacer

T2 7075 Spacer

<< LEFT >>

<< RIGHT >>

34.30mm

Ball Cups,, Long A-03-VBC-6030 x 4

3x52mm Hardened Springsteel Turnbuckle C-02-VBC-6003 x 2

B02-G-50279 Lightning
2mm Rear Axle Spacer

B02-G-50279 Lightning
2mm Rear Axle Spacer

M2.5x8 Cap Head

M2.5x8 Cap Head

Lightning10 Left Rear Wheel Hub

BAG MARKED

STEP8

Servo And Top Plate Assembly

11

© VBC Racing LIGHTNING10M235

8

LightningF Upper Deck Support Mount B-02-VBC-5096 x 2

M3x6 Flathead

M3x6 Flathead

M3x6 Flathead C-02-SC-F0306 x 4

Firebolt Center Battery Stopper A-03-VBC-6074 x 1

Option :Low CG Brass Weight 23.5gm
C-02-G50222

M3x6 Flathead

LightningF Upper Deck Support Mount

Firebolt Center Battery Stopper

Firebolt Center Battery Stopper

M3x6 Roundhead

Lightning 10M Graphite Front Shock Mount Plate A-01-P51400 x 1

BAG MARKED

STEP9

12

© VBC Racing LIGHTNING10

9

Shock Assembly

BAG MARKED

STEP10-12

Shock Assembly

13

© VBC Racing LIGHTNING10M235

9

10

Front Bumper Assembly

M2x12 Shaft Pin B-02-VBC-0022 x 2

Body Height Adjuster Support A-03-VBC-0015 x 2

Front Body Post A-03-VBC-0013 x 2

Body Height Adjuster Support

Body Height Adjuster Support

Front Body Post

Front Body Post

Lightning10 235 Graphite
Front Bumper A-01-P50273

M2x12 Shaft Pin

M2x12 Shaft Pin

M3x10mm Flat Head Screw C-02-SC-F0310 x 2

M3x10mm Flat Head

M3x8mm Flat Head

M3x10mm Flat Head

M3x8mm Flat Head

Lightning12 Plastic Front Bumper D-05-VBC-0112 x 1

M3x8mm Flat Head Screw C-02-SC-F0308 x 2

M3 Locknut C-02-SC-NN03 x 2

BAG MARKED

STEP18-20

14

© VBC Racing LIGHTNING10M235

11

Installing Front Bumper

12

Rear Body Post Assembly

M2x12 Shaft Pin B-02-VBC-0022 x 2

Body Height Adjuster Support A-03-VBC-0015 x 2

Front Body Post A-03-VBC-0013 x 2

Front Body Post

M3 Locknut C-02-SC-NN03 x 2

M3x10mm Flat Head Screw C-02-SC-F0310 x 2

M3x10mm Flat Head

M3 Locknut

M3x8 Roundhead C-02-SC-R0308 x 2

M3x8 Roundhead

Body Height Adjuster
Support

M2x12 Shaft Pin

BAG MARKED

STEP18-20

Install Wheels And Motor

15

© VBC Racing LIGHTNING10M235

4-40x5/16” Cap Head Screw x 8

Bearing 1/8x5/16, Flanged C-02-BB-1856F x 4

M3 Locknut C-02-SC-NN03 x 2

M3.3x0.4 Kingpin Shim C-02-VBC-5069 x 2

12

M3x8 Roundhead C-02-SC-R0308 x 2

13

Install Motor And Electronics

4-40x5/16” Cap Head

Bearing 1/8x5/16, Flanged

Bearing 1/8x5/16, Flanged

M3 Locknut

M3.3x0.4 Kingpin Shim

M3x8 Roundhead

BAG MARKED

STEP12

16

© VBC Racing LIGHTNING10M235

Install Electronics

15

Install ESC And Receiver

[Items Are Not Included]

Double Side
Tape

Instruction Book P-01-P51438 VBC Racing Lightning10M235 1/10 Pan Car Kit D-05-VBC-CK28

www.vbcracing.com

1/10 SCALE ELECTRIC COMPETITION PAN CAR KIT

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT

Order Number Package Descriptions Parts Number Parts Descriptions Quantity in a pkg

A-01-P51395 Lightning10M Graphite Main Chassis A-01-P51395 Lightning10M Graphite Main Cha ssis 1

A-03-VBC-5007 Pivot Brace (bottom) 1
A-03-VBC-5008 Pivot Brace (cover) 1

A-03-VBC-5009 Pod Link Set A-03-VBC-5009 Pod Link 2

A-03-VBC-1027 Pivot Balls A-03-VBC-1027 5mm Pivot Ball 5

B-02-P51284 FXM Aluminium Motor Mount B-02-P51284 FXM Aluminium Mot

or Mount 1

B-02-P50664 Aluminium Motor Mount B-02-P50664 Aluminium Motor Mou nt 1

B-02-P30890 T2 7075 Spacer (Red) B02P 30890 T2 7075 Spacer (Red) 10

B-02-P30891 T1 7075 Spacer (Red) B02P 30891 T1 7075 Spacer (Red) 10

B-02-P51288 4.7mm Thin Ball Nuts B02P51288 4.7mm Thin Ball Nuts 5

A-01-P51398 Lightning10M Rear Tweak Plate A01P51398 Lightning 10M Rear Tweak Plate 1

A-01-P51397 Lightning10M 235 Graphite Rear Shock Mount Plate A

01P51397 Lightning 10M 235 Graphite Rear Shock Mou nt Plate 1

A-01-P51396 Lightning10M 235 Graphite Lower Pod Plate A01P51396 Lightning 10M 235 Graphite Lower Pod Plate 1

B-02-P50666 Rear Axle Housing B02P50666 Re ar Axle Housing 1

A-01-P51401 Carbon Cross Tu be A01P51401 C arbon Cross Tube 1

A-01-P51399 Ride Height 3mm Spacer A01P51399 Ride Height 3mm Spa cer 4

C-02-VBC-6003 3x52mm Harden ed Springsteel Turnbuckle C-02-VBC-6003 3

x52mm Hardene d SpringSteel Turnbuckle 2

D-06-VBC-0138 P lastic Ball Cups Set A-03-VBC-6029 Ball cups, short 2

A-03-VBC-6030 Ball cups,, long 10
A-03-VBC-6047 Ball cups L Type, long, Right 1
A-03-VBC-6048 Ball cups L Type, long, Left 1

B-02-P-50262 Alum Servo Mount B-02-P-50262 Alum Servo Mount 2

A-03-VBC-0053 Servo Horn Type F (Com posite) 1
A-03-VBC-0054 Servo Horn Type A (C omposite) 1
A-03-VBC-0032 Servo Spacer 1mm 2
A-03-VBC-

0033 Servo Spacer 2mm 2

D-06-VBC-0123 Firebo lt Bumper & Battery Stopper Set A-03-VBC-6011 Front Bumper 1

A-03-VBC-6012 Rear Bumper 1
A-03-VBC-6074 Firebolt Center Battery Stopper 1
A-03-VBC-6075 Firebolt Side Battery Stopper X 1
A-03-VBC-6076 Firebolt Side Battery Stopper Y 1

B-02-VBC-5096 LightningF Upper Deck Suppo rt Mount B- 02-VBC-5096 LightningF Upper Deck Supp ort Mount 2

A-01-P51400 Lightning10M Graphite Front Shock M

ount Plate A01P51400 Lightning10M Graph ite Front Shock Mount Plate 1

B-02-VBC-0045 Ball Connector B-02-VBC-0045 Ball Connector 10

A-02-VBC-5070 Lightning12 Plastic Front Bumper, Left 1
A-02-VBC-5071 Lightning12 Plastic Front Bumper, Right 1

A-03-VBC-0013 Front Body Post 2

A-03-VBC-0014 Rear Body Post 2

A-03-VBC-0015 Body Height Adjuster Supp ort 4

B-02-VBC-0076 Body Clip 8
B-02-VBC-0020-12 M2x12 Shaft Pin 4

B-02-VBC-0076 Body C

lips B-02-VBC-0076 Body Clips 20

B-02-VBC-5015 Ball Connector 4.7x12mm (5pcs) B-02-VBC-5015 Ball Connector 4.7x12mm (5pcs) 5

B-02-VBC-5018 Damper Tube Shaft 1
B-02-VBC-5019 Damper Tube 1

B-02-VBC-5020 4.7mm Ball Nuts B-02-VBC-5020 4.7mm Ball Nuts 5

A-03-VBC-5021 Turnbuckle Cu p (Short) A-03-VBC-5021 Turnbuckle Cu p (Short) 4

B-02-VBC-0120 TBB Shock Body 1

B-02-VBC-0121 TBB Shock Height Adjuster 1

A-03-VBC-0122 TBB Bottom Cap 1

A-03-

VBC-0123 TBB Shock Piston (3 holes) 1

A-03-VBC-0124 TBB Shock Bottom Conn ector 1

B-02-VBC-0125 TBB Shaft Cap 1

A-03-VBC-0126 TBB Shaft Guide 1

B-03-VBC-0127 TBB Shock Shaft 1

B-03-VBC-0128 TBB Sealer O-Ring (Shock Heigh t Adjuster) 1

B-03-VBC-0012 TBB Shaft Sealer O-Ring 1

B-03-VBC-0129 M2 E-Clip 4

A-03-VBC-0130 TBB Shock Top Con nector 1

A-03-VBC-0131 TBB Spring Bottom Support 1

B-03-VBC-0132 TBB Short Oil Sealer Cap (Medium Sof

t) 1

B-02-VBC-0133 TBB Shock Body Cap 1

B-02-VBC-0134 TBB Shock Spring (Red-Me dium Soft) 1

C-02-VBC-5042 Front Springs (Medium) C-02-VBC-5042 Front Springs (Medium) for Lightning 1/12 2

C-02-VBC-5044 Kingpin C-02-VBC-5044 Lightning12 Kingpin 2

A-01-VBC-5045 Lightning12 Height Adjust Spacer, 1.5mm A-01-VBC-5045 Lightning12 Height Adjust Spacer, 1.5mm 2

A-01-VBC-5048 Lightning12 Front Upper Arm Spacer, 1. 5mm A-01-VBC-5048 Li

ghtning12 Front Uppe r Arm Spacer, 1.5mm 2

A-03-G51101 Composite X Silver Front Upper Arm for Lightning Series A03G51101

Composite X Silver Front Upper Arm for Lightning Series

2

A-02-VBC-5052 Front Upper Arm Eyelet A-02-VBC-5052 Lightning12 Front Upper Arm Eyelet 2

A-02-VBC-5053 M3x15 Turnbuckle BK A-02-VBC-5053 M3x15 Turnbuckle, Black 2

C-02-VBC-5054 2mm Uppe r Pin C-02-VBC-5054 2mm Uppe r Hinge Pin 4

A-01-VBC-5055 Lightning12 Caster Spacer. 0.8mm 2

A-01-VBC-5056 Lightning12 Caster Spacer. 1.2mm 2

B

ody Posts Pack

D

amper Tub e Set

D-05-VBC-0101

P

ivot Brace

D-05-VBC-0012

D-05-VBC-0110

C

aster Spacer Set

D-05-VBC-0103

D-05-VBC-0018

W

ildFire Servo Horn Set (Composite)

D-05-VBC-0252

T

rue Big Bore (TBB) Single Shock Set

D-05-VBC-0112

L

ightning12 Plastic Front Bumper

Parts List

Parts List

B-02-VBC-5057 Aluminum Uppe r Arm Mount B-02-VBC-5057 Lightning12 Aluminum Up per Arm Mount 1

B-02-P50233 Lightning10 ALU7075 Steering Knu ckle 2
C-02-P50259 M2.5x0.5 Shim 2

B-02-VBC-5060 Lightning Front Axles B-02-VBC-5060 Lightning Front Axle 2

B-02-VBC-5065 Alum Front Bulkhead L B-02-VBC-5065 Lightning12 Alum Front Bulkhead, Left 1

B-02-VBC-5066 Alum Front Bulkhead R B-02-VBC- 5066 Lightning12 Alum Front Bulkhead, Right 1

A

-03-G51102 Composite X Silver Front Lower Arm for Lightning Series A03G51102

Composite X Silver Front Lower Arm for Lightning Series

2

B-02-VBC-5068 Pivot Ball B-02-VBC-5068 Pivot Ball 4

C-02-VBC-5069 King Pin Shim, M3.3x0.4 C-02-VBC-5069 Lightning12 King Pin Shim, M3.3x0.4 (20pcs) 20

B-02-VBC-5073 14mm Aluminum Standoff B-02-VBC-5073 14mm Aluminum Standoff 4

B-02-VBC-5074 Alum Side Spring Retainer B-02-VBC-5074 Aluminum Side Spring Retainer 2

A-02-VBC-5075 M4 Nylon Nuts for Lightning/Assoc.R5 series A- 02-VBC-5075 M4 Nylon Nuts 2

C-02-VBC-5076 Bevelled W

asher C-02-VBC-5076 Bevelled Washer 6

A-03-P50232 64 Pitch 88T Spur Gear A -03-P50232 64 Pitch 88T Spur Gear 1

B-02-VBC-5081 Thrust Cone for Lightning/Assoc.R5 series B-02-VBC-5081 Thrust Cone 1

C-02-DB-0801S 1/8" Diff Balls for Lightning/Assoc.R5 series C-02-DB-0801S 1/8" Diff Balls 8

B-02-VBC-1001 Diff D Ring B-02-VBC-1001 Diff D Ring 2

B-02-VBC-5082 Diff Seal O-ring B-02-VBC-5082 Diff Seal O-ring 10

C-02-BB-1856F

Bearing 1/8 x 5/16, Flanged for Lightning/Assoc.R5 series

C-02-BB-1856F Bearing 1/8 x 5/16, Flanged 2

C-02-BB-3814 Bearing, 3/8 x 1/4 for Lightning/Assoc.R5 series C-02-BB-3814 Bearing , 3/8 x 1/4 2

C-02-BB-3814F

Bearing, 3/8 x 1/4, Flanged for Lightning/Assoc.R5 series

C-02-BB-3814F Bearing, 3/8 x 1/4, Flanged 2

A-02-VBC-5092 Ball Connector 4.7x17mm A-02-VBC-5092 Ball Connector 4.7x17mm 5

B-02-VBC-0019-20 3x5.5x2 Alum Spacer B-02-VBC-0019-20 3x5.5x2 Alum Spacer 10

B-02-VBC-0019-10 3x5.5x1 Alum Spacer B-02-VBC-0019-10 3x5.5x1 Alum Spacer 10

C-02-SC-C0440 4-40x5/16" Cap Hea d Screw C-02-SC-C0440 4-40x5/16" Cap Head Screw 20
C-02-SC-R2504 M2.5x4mm Round head Screw C-02- SC-R2504 M2.5x4mm Round

head Screw 20
C-02-SC-R2508 M2.5x8mm Cap He ad Screw C-02-SC-R2508 M2.5x8mm Cap He ad Screw 20
C-02-SC-R2.0x6 M2.0x6mm Cap H ead Screw C-02-SC-R2.0x6 M2.0x6mm Cap Head Screw 30
C-02-SC-R2.0x8 M2.0x8mm Cap H ead Screw C-02-SC-R2.0x8 M2.0x8mm Cap Head Screw 20
C-02-SC-R0204 M2x4mm Roundh ead Screw C-02-SC-R0204 M2x4mm Roundh ead Screw 20
C-02-SC-NN03 M3 Locknut C-02-SC-NN03 M3 Locknut 20
B-02-VBC-5093 M3x6x0.5 Spacer B-02-VBC-5093 M3x

6x0.5 Spacer 20
C-02-SC-F0310 M3x10mm Flathead Screw C-02-SC-F0310 M3x10mm Flathead Screw 20
C-02-SC-R0310 M3x10mm Roundh ead Screw C-02- SC-R0310 M3x10mm Roundh ead Screw 20
C-02-SC-F0312 M3x12mm Flathead Screw C-02-SC-F0312 M3x12mm Flathead Screw 20
C-02-SC-F0306 M3x6mm Flathead Screw C- 02-SC-F0306 M3x6mm Flathead Screw 20
C-02-SC-R0306 M3x6mm Roundh ead Screw C-02-SC-R0306 M3x6mm Roundh ead Screw 20
C-02-SC-F0308 M3x8mm Flathe

ad Screw C-0 2-SC-F0308 M3x8mm Flathead Screw 20
C-02-SC-R0308 M3x8mm Roundh ead Screw C-02-SC-R0308 M3x8mm Roundhe ad Screw 20
C-02-SC-SS-0308 M3x8mm Set Screw C-02-SC-SS-0308 M3x8mm Set Screw 20

A-03-VBC-1047 Side Spring (Soft) 2
A-03-VBC-1047 Side Spring (Medium) 2
A-03-VBC-1047 Side Spring (Hard) 2

C-02-G50254 TiN Coated 2mm Up per Pin for Lightning Series C- 02-G-50254 TiN Coated 2mm Upp er Pin for Lightning Series 2

C-02-G50

255 TiN Coa ted Kingpin for Lightning Series C-02-G-50255 TiN Coa ted Kingpin for Lightning Series 2

C-02-G50222 Low CG Brass Weight 23.5gm 2
C-02-SC-F0306 M3x6mm Flathead Screw 2

C-02-P50211 Lightning Inline Front Axle C-02-P50211 Lightning Inline Front Axle 2

C-02-P-50266 3x15mm SuperSteel Turnb uckle C-02-P-50266 3x15mm SuperSteel Turnbu ckle 2

A-01-P-50273 Lightning10-235 Graphite Front Bumpe r A01P 50273 Lightning10-235 G

raphite Front Bumper 1

A-01-P-50274 Lightning10-235 Front Hinge Brace A01P50274 Lightning10-235 Front Hinge Brace 1

A-01-P-50275 Lightning10-235 Front Suspension Plate A01P50274 Lightning10-235 Front Suspension Plate 1

C-02-BB-3814F Bearing, 3/8 x 1/4, Flanged 2
C-02-BB-3814 Bea ring, 3/8 x 1/4 1
A-02-VBC-5075 M4 Nylon Nuts 1
C-02-VBC-5076 Belleville Washer 3
A-03-P50232 64 Pitch 88T Spur Gear 1
C-02-P51410 Lightning10M235 St

eel Rear Axle 1
B-02-P50213 Lightning10 Left Rear Wheel Hub 1
B-02-P50214 Lightning10 Rear Diff Hub 1
B-02-VBC-5081 Thrust Cone 1
C-02-DB-0801S 1/8" Diff Balls 16
B-02-VBC-1001 D-Drive Ring 2
B-02-VBC-5082 Diff Seal O-ring 2
B-02-G50279 Lightning 2mm Rear Axle Spacer 2
B-02-G50280 Lightning 1mm Rear Axle Spacer 2

C-02-P50282 Lightning10-235 Carbon Rear Axle C02P50282 Lightning10-235 Carbo n Rear Axle 1

C-02-P51410 Lightning10M235 Steel Rear Axle C02P51410 Lightning10M235 Steel Rear Axle 1

D-05-VBC-0156 Stee ring Knuckles for Lightning10

A-03-VBC-1047 Side Spring Set for Lightning/Assoc.R5 series

C-02-G50222 Low CG Brass Weight 23.5gm

D-05-VBC-0272 Ba ll Differential Set for Lightning10M235