Vaxcel FN744 series, Stratus series Instructions For Installation And Use Manual

1

INSTRUCTIONS FOR INSTALLATION AND USE

Ceiling Fan Model Stratus (FN744XX)

BEFORE YOU START

Proper use:

- This product is intended exclusively for non-commercial use as ceiling fan.

- The product has to be installed and used in accordance with these instructions.

- Any use of this product that is not in accordance with these instructions will void the legal

warranty of the manufacturer.

Please keep the original carton and packaging material as the warranty will only be honored if product
is returned in complete original packaging.

FOR YOUR OWN SAFETY

General safety instructions:

- For the safe use of this product, you need to have read and understood these instructions
before installing or using the product.

- Please follow all safety instructions! If you ignore these safety instructions, you will endanger
yourself and others.

- Keep these instructions for future reference.

- All parts of this product have to be installed properly in order to ensure safe operation.

- Modification of the product and use of non-approved parts are prohibited.

- This product is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the product by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the product.

Electrical safety:

- The electrical installation must be performed by a qualified electrician and must be in
accordance with national and local regulations.

- Use a fault-current circuit breaker with a rated residual current of no more than 30 mA.

- Make sure to install an all-pole disconnection switch having a contact separation of at least

3mm between poles in the supply wiring to the ceiling fan.

- Before connecting the appliance to the electrical grid, make sure that it will only be operated
within the specified parameters.

- The fan must be properly grounded to avoid the risk of electric shocks.

- Switch off the power before connecting, repairing or cleaning the fan.

Storage and transport:

- Always store the fan in a dry environment.

- Protect the fan from damages during transport.

2

Safety instructions specific to this fan:

- Attach the fan only directly to the ceiling structure. The minimum distance between the blades
of the fan and the floor must be 2.3m.

- The carrying capacity of the ceiling structure from which the fan is hung must be at least three
times the weight of the fan.

- The fan can only be installed horizontally on the ceiling.

- The rotor area has to be kept clear of any objects at all times.

- Never mount the fan outside or in a humid or wet environment. The fan cannot be installed

within proximity of water (e.g. bath tub, swimming pool, water connection).

FAN OVERVIEW

1. Canopy

2. Fan assembly

3. Fan blades

4. Fan light housing

5. Glass shade

UNPACK THE FAN

- Unpack the fan and check that contents are complete.

- Dispose of packaging – see also “Disposal”.

Contents of packaging:

Instructions for installation and use

Assembly kit, incl. screws and washers

Mounting bracket

Transmitter for remote control

Motor housing

Downrod stand cover

Fan light housing

Canopy

Fan blades

Glass shade

Note: In case of damaged or missing parts, please contact your retailer.

INSTALLATION

Risk of electric shock: Switch off the electricity using the switch at the circuit breaker box before

installing the fan.
Risk of electric shock: The electrical installation must be performed by a qualified electrician and

must be in accordance with national and local regulations.
Risk of injury: In case you need to drill holes for mounting the fan, make sure that the drills have

sufficient distance to in-ceiling wiring.

1 2 3 4 5