Vax U91-P5, C90-MVX, U91-P6, U90-M3, U90-M4 Instruction Manual
...
4
3
2
11
8
7
6
10
1
5
3
2
9
1. Parts Overview
The Unit
1 On/Off Button
Insert the plug into the electrical outlet. Press the
on/off switch on the top of the vacuum cleaner, to
switch the vacuum cleaner on and press the button
again to turn the vacuum cleaner off.
2 Dirt Container
Locked onto the top of the unit.
3 Cyclone Separator
Located inside of the Dirt Container.
4 Dirt Container and Carry Handle
Use the carry handle located on the side of the dirt
bin to move the vacuum cleaner from room to room.
5 Dirt Container Release Button
Press the button on the top of the dirt container. The
dirt container can then be lifted and removed off the
unit.
6 Auto Cord Rewind
To rewind the power cord, press the cord rewind
button, located on the top of the vacuum cleaner.
7 Floor Tool Parking Slot
For convenience there is a parking slot located at the
rear of the vacuum cleaner where the Floor Tool can
be parked for carrying and storage.
8 Plug
9 Dirt Bin Quick Release Button
Hold the dirt container over a bin and press the
release button.
10 Pre-Motor Filter Cover
Located inside the lid of the dirt
bin container.
11 Hose Inlet
12 Post Motor Filter Cover
Located on the base of the unit.
Retain this guide for future reference.
M
A
C
H
MACH
Bagless cylinder
Vax model number: C90-M1/C90-MVX Series
GB
Instruction Manual V2.0
vax.co.uk
What is your serial number?
Note this down in case you need it in future
(on the base of your cleaner)
12
-----
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
What is your model number?
C 9 0 M
--
Vax C90-M1/C90-MVX Series User Guide v2.0.qxd:UG 28/7/10 12:07 Page 1
vax.co.uk
14
1
3a
15
16
1
7
18
The Accessories
13 2-in-1 Tool
a. Dusting Brush: For delicate surfaces.
b. Upholstery Tool: For carpet, upholstery and stairs etc.
14 Crevice Tool
For crevices, corners and cracks.
15 Combination Floor Tool
(Some models only)
For carpet and rug cleaning: Press the rocker switch
on the Combination Floor Head to raise the brushes.
For hard floor cleaning: Press the rocker switch on the
Combination Floor Head to lower the brushes.
16 Telescopic Tube
The telescopic tube can be lengthened or shorted by
pushing the button in and sliding the tube apart or
together as required.
17 TurboTool
(Some models only)
For pet hair, stair and upholstery cleaning.
NOTE: Do not use the Turbo Tool on suede and
leather surfaces.
18 Hose
Tool caddy on handle for tool storage.
19 Stretch Hose
(Some models only)
For full height stair cleaning.
NOTE: This should not be used as the main hose.
The stretch hose is recommended to be used for stair
cleaning. The unit should always be positioned at the
bottom of the stairs
20 Hard Floor Tool
(Some models only)
For parquet and laminate flooring.
21 Turbo Brush
(Some models only)
NOTE: Not recommended for hard floors.
F
or large carpeted areas.
13b
19
21
22 23 24
PLEASE NOTE: some parts may vary according to model. Please check inside flap of box for more details.
To replace or purchase parts for your vacuum
cleaner, please visit our website:
vax.co.uk
If your Vacuum Cleaner or Accessories are Damaged/Faulty
Please Call our Vax Careline on: 0844 412 8455
!
Your Filters:
22 Foam Pre-Motor Filter
23 Fabric Pre-Motor Filter
24 HEPA Post-motor Filter
(Some models only)
Anti bacterial HEPA Post-Motor Filter (Some models only)
IMPORTANT: The condition of the filters affects the performance of your
vacuum cleaner. Please check and wash filters periodically (depending on
level of use). For full cleaning instructions see page 6
.
IMPORTANT: Do not use the vacuum cleaner without all the filters in place.
2
parts overview
2
0
Replacement filter kits are available at vax.co.uk
!
!
KEEP YOUR VAX LIKE NEW!
Vax C90-M1/C90-MVX Series User Guide v2.0.qxd:UG 28/7/10 12:07 Page 2
3
assembly / operation
13
14
17
CLICK!
WARNING: Always
switch off and unplug
the vacuum cleaner from the
electrical outlet before
assembling, opening or
emptying the dirt container,
or before connecting/
disconnecting the attachments.
2. Assembling your vacuum cleaner
3. Choose the attachments for the job:
4. Operating the appliance
5. Packing away and storage
IMPORTANT: Always unplug the vacuum from the electrical
outlet and rewind the power cord as directed before storing.
NOTE: When rewinding the power cord, guide the cord
with one hand, This will prevent the cord from whipping
which could cause damage or injury.
NOTE: For convenience there is a parking slot located at
the rear of the vacuum cleaner where the floor tool and
hose can be parked for carrying and storage.
!
!
1
8
18 16
CLICK!
1
6
1
6
15
15
20
21
NOTE: Fully unwind the
power cord. A yellow mark on
the power cord indicates the
recommended cord length.
Do not exceed the cord
length beyond the red mark.
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Vax C90-M1/C90-MVX Series User Guide v2.0.qxd:UG 28/7/10 12:08 Page 3
vax.co.uk
4
dirt container & filters
6. Dirt Container: Maintenance
Emptying the Dirt Container
Cleaning the Cyclone Separator
When the cyclone separator has been cleaned and dried completely, re-attached the dirt container to the lid of the
separator and return the dirt container to the unit.
7. The Filters: Maintenance
CLICK!
CLICK!
IMPORTANT : Always switch off and unplug the
vacuum cleaner from the electrical outlet before
removing the Dirt Container.
IMPORTANT : Do NOT use the vacuum without ALL
of the filters in place.
NOTE: Do not use any detergents or boiling water to wash
the filters.
IMPORTANT: Remove the Dirt Container from the
unit and dispose of the dirt inside the container
before cleaning.
IMPORTANT : The cyclone separator should not be
submerged in water.
!!!
!
Vax recommends that the pre- and
post-motor filter should be checked and
cleaned periodically depending on the
frequency of use and the volume of dirt
being picked up on each occasion.
NOTE : Both Pre- and Post-Motor Filters
can be rinsed in warm water (max 40°C).
Allow to air dry for 24 hours before
replacing. Do NOTuse any detergents or
boiling water to wash the filters.
Once completely dry, return the premotor filters and case to the vacuum
cleaner. Replace the pre-motor filter
cover before restarting the vacuum
cleaner.
IMPORTANT: Your vax vacuum cleaner is fitted with high performance filters it is essential
that theseare well maintained and cleaned according to the following instructions.
!
Vax C90-M1/C90-MVX Series User Guide v2.0.qxd:UG 28/7/10 12:08 Page 4
Loading...