Multi-Clean Complete
Let’s get started
S86-MC-C
vax.co.uk
Let’s talk safety Let’s talk safety
Basic
safety
precautions
Don’ts
This steamer is intended for household use only and NOT for
commercial or industrial use
• Only use the steamer indoors and keep the area you’re
cleaning well lit.
• Keep ngers, hair and loose clothing away from moving parts
and openings whilst using the steamer.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Don’t touch any hot areas/accessories on the steamer. It’s
normal for the steamer and accessories to heat up during
use, always turn o and allow them to cool down before
handling or changing.
• Don’t leave the steamer plugged in when unattended.
• Don’t use the steamer if it has been dropped, damaged,
immersed in water or left outdoors.
• Don’t run over the power cord or use steamer if the power
cord or plug is damaged. Please contact our Customer Care
Line on: 0330 026 8455 (Mon-Fri 8.30am to 6.30pm,
Sat 9.00am to 5.00pm).
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Please refer to oor manufacture’s care recommendations before us, and test
your ooring/carpet/rugs by running the steamer over a small hidden area,
if no pile distortion or no damage occurs continue cleaning. Not suitable for
use on wax polished oors or furniture, acrylic surfaces and synthetic, velvet
or steam/water sensitive materials.
• This steamer should not be used to clean electrical appliances such
as microwaves, televisions and electrical heating systems etc.
• Only Vax recommended tools should be used with the steamer.
Please keep instructions for further use.
• Don’t handle the plug or use the steamer with wet hands.
• Don’t pull or carry the steamer by the power cord. Don’t use the power cord
as a handle, pull the power cord around corners, sharp edges or close a door
over the power cord. Don’t unplug steamer by pulling on the power cord.
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to the steamer, remove blockages only as instructed in this guide.
• Don’t aim the steamer at people, animals, plants and electrical components
such as interior of ovens or wires. Never touch the steam jet or tools from
a short distance (there is a risk of scalding).
• Don’t use the steamer with incorrect voltage as this may result in damage
or injury to the user. The correct voltage is listed on the ratings label.
Do’s
• Always ll the water tank with water only, never add perfume,
stain remover or products containing alcohol.
• Always vacuum your carpets thoroughly and make sure hard
oor areas are free from grit and debris before using the
steamer.
• Always unplug the steamer before carrying out any
maintenance.
• Always replace the fuse in the plug with a British 13amp fuse.
Always protect the power cable from heated surfaces or near
open ames.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it could
be a trip hazard.
• Always carry the steamer by the handle.
• Store the steamer in a cool, dry area. Before storing the steamer please
ensure the water tank is thoroughly clean and dry.
Thank you for buying this Multi-Clean Complete.
Taking care of your oors
The Multi-Clean Complete is designed to make steaming oors, upholstery and surfaces
regularly, as eective and ecient as possible and this user guide will help you get the most
out of your machine.
Maintaining your home with the Multi-Clean Complete will ensure it keeps hygienically clean.
Maintaining your oors will ensure they keep their appearance for longer. You’ve chosen oors
for your home for a reason and Vax will help you take good care of them.
Taking care of your Multi-Clean Complete
Also inside this guide are instructions on maintaining your new machine, so that it’s always
ready when you are to tackle your home.
Contents
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
Multi-Clean Complete
Included with
your machine
Hose
Concentration
nozzle
Grout brush
Large plastic brush
Window squeegee
/Upholstery tool
Accessories connector
Small plastic brush
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK
This User Guide can be found online at: vax.co.uk/support
Let us know what you think @VaxUK
What to do if it goes wrong
Getting in touch
Accessories
Detailer tool
Metal brush
Scraper tool
Shoulder strap
Window cloth
Microbre cleaning
pads x2
Carpet glider
Accessories
storage bag
Measuring jug
Descaling pin
Getting to know your machine Getting started
Handle
Upper cord clip
Lower cord clip
Steam release trigger
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you begin cleaning
• Please refer to oor manufacturer’s care recommendations before use and test the steamer on an hidden area
of ooring/surface to begin with.
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don’t aim the steamer at people, animals, plants and electrical components such as interior of ovens or wires.
Never touch the steam jet or oor head from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will
switch o. If this happens turn o and unplug the steamer, allow to cool for a least 2 to 4 hours and re-start.
• Don’t use hot or boiling water to ll clean water tank.
CAUTION: The steamer oorhead gets very hot during use. Always switch o the steamer before emptying the water
tank or changing the cleaning pads/accessories. To release the handle, press the release button and push up. When
removing the handle please keep your face away from the handle when pulling the handle away from the main body.
Clean water tank
Hard water lter
(hidden)
On/O button
LED indicator
Floor head
Technical Specication
Name Multi-Clean Complete
Voltage 220-240V~50Hz
Water tank capacity 0.4l
Wattage 1600W
Cord length 7m
Weight 2.7kg
Handle release button
Floor head release button
Accessories & Consumables*
Hard Water Filter Kit (Type 1)
1-1-133327-00
Microbre Cleaning Pads (Type 1)
1-1-131448-00
Steam Accessory Brush Kit (Type 3)
1-1-132730-00
Steam Accessory Tool Kit (Type 2)
1-1-132731-00
Carpet Glider (Type 1)
1-1-132671-00
Shoulder Strap
1-1-132373-00
Assembling your steamer
Push the main body down
into the oor head until it
clicks into place.
Stand the steamer upright
by pushing the main body
forward to lock into position.
Insert the handle at the top of the main body
and slide the handle downwards. Press the
handle release button inwards and push
handle down until it clicks into place.
Subject to technical change without notice.
*To purchase consumables and accessories, please visit vax.co.uk
Using your machine
Using your machine
Filling water tank
Press the water tank
release button and pull
tank to remove.
IMPORTANT: Never use the steamer without a cleaning pad attached to the oor head. Never leave the steamer in one
spot for extended periods of time or with a damp or wet pad attached as this may damage the oor surface.
Pull the tab on water tank
cap to open.
Fill tank with 400ml max
of water. Replace cap and
push rmly to close.
To replace water tank, line up
base into ridge of steamer.
Push to click into place.
Using your steamer
IMPORTANT: When using on carpets, always make sure the microbre cleaning pad covers the oor head entirely
before using the carpet glider. Only use the carpet glider when refreshing carpets.
Refreshing carpets
Place the microbre pad on
the oor white side facing
up. Place steamer onto pad
making sure the entire pad
covers the oor head.
With pad attached, place
steamer into the carpet
glider. The carpet glider
should only be used when
refreshing carpets.
Plug into mains and
press the power button
to switch on.
The blue light will illuminate
to show power on and
steamer is heating.
Place the microbre pad on
the oor white side facing
up. Place steamer onto pad
making sure the entire pad
covers the oor head.
Place your foot onto the
oor head and pull handle
backwards to recline.
Plug into mains and
press the power button
to switch on.
To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger
continuously to prevent over
wetting oors.
The blue light will illuminate
to show power on and
steamer is heating.
Move steamer slowly
backward/forward across
oor paying particular
attention to high trac areas.
Squeeze trigger as required.
The green light will illuminate
to show the steamer is ready
to use. The green light will
go o when the steamer is
re-heating.
Allow the steamer to cool
down before removing
pad. Hold corner of pad
down with your foot and lift
steamer to remove pad.
The green light will illuminate
to show the steamer is ready
to use. The green light will
go o when the steamer is
re-heating.
Lift steamer o glider. Allow the steamer to cool
Place your foot onto the
oor head and pull handle
backwards to recline.
down before removing
pad. Hold corner of pad
down with your foot and lift
steamer to remove pad.
To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger
continuously to prevent over
wetting oors.
Move steamer slowly
backward/forward across
oor paying particular
attention to high trac areas.
Squeeze trigger as required.
Using your machine
Using your machine
IMPORTANT: Always switch o the steamer before attaching any tools and accessories. Test for colourfastness in
a small hidden area of upholstery/fabric to check for colour removal before use. Never use the squeegee tool on cold
glass/windows as it may cause damage.
Using the handheld steamer
Push the handle release
button and lift the handle
to remove from main body,
care should be taken as
release button is sti.
Choose an accessory
and line it up with the
concentration nozzle, twist
and push to lock into place.
Push the oor head
release button and lift the
main body from the oor
head to remove.
Press the on/o button to
switch on.
Push the accessory
connector onto the steamer
nozzle until it clicks into
place.
Line up concentration
nozzle with the accessory
connector, twist and push
to lock into place.
Attaching the accessory hose
Push the accessory
connector onto the steamer
nozzle until it clicks into
place.
Choose an accessory
and line it up with the
concentration nozzle, twist
and push to lock into place.
Line up hose with the
accessory connector, twist
and push to lock into place.
Press the on/o button to
switch on.
Line up concentration
nozzle with the hose, twist
and push to lock into place.
Important
• Accessories can only be attached with the concentration nozzle.
• Taps should be turned o when steaming around them.
• Don’t steam clean ovens, oven surfaces or grills when they are
hot, allow them to cool to room temperature rst.
• Test for colour fastness in a small hidden area of upholstery/
fabric to check for colour removal before use.
TIP
After connecting hose,
concentration nozzle and tools
check they are securely tted
and locked in place before
turning on.
Using your machine
Taking care of your machine
CAUTION: Never use the squeegee on cold glass/windows as it may cause damage.
Using the tools
Concentration nozzle
Use to remove soap scum
in baths and shower
enclosures and to clean
stubborn stains in kitchens.
Grout brush
Lifts embedded dirt from
in between tiles.
Brushes
Ideal for any surface from
tiles, sinks, toilets and
oven tops.
Bending nozzle
For hard to reach areas,
e.g. around taps.
Squeegee tool
Great for leaving your
windows, tiles and mirrors
gleaming. Not to be used
on cold glass/windows.
Scraper tool
Ideal for removing dried on residue
from ovens, work surfaces and pans.
Upholstery/cloth tool
Attach the cloth to the
squeegee tool for use on
upholstery and cloth.
IMPORTANT: Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks.
Don’t leave water in the tank between uses as this can eect the steamer’s performance. The water tank should be
emptied and rinsed after each use.
Emptying the water tank
Press the water tank
release button and pull tank
to remove.
IMPORTANT: Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks.
Pull the tab on water tank
cap to open.
Empty any excess water
over the sink. Rinse tank
out with clean water.
Clearing blockages
IMPORTANT: After connecting hose, concentration nozzle and tools, check they are securely tted and locked in place
before turning on.
If there is an obstruction
to the steam ow through
the machine, steam may
be released through the
bleed valve.
Press the oor head
release button on the neck
of the machine to remove
the oor head.
Blockages can be cleared
using the de-scaling pin,
insert the full length of the
pin into the nozzle and
twist if necessary.
Remove the pin from the
nozzle. Holding the steamer
vertically, tap the nozzle
to release any mineral
deposits.
Let’s talk technical
IMPORTANT: Never use bleach or fabric softener when washing the microbre pad. Always allow the steamer to fully
cool down before removing the microbre pad.
Cleaning the microbre pad
!
40˚C
MAX
Notes
Allow the steamer to cool
down before removing
pad. Hold corner of pad
down with your foot and lift
steamer to remove pad.
IMPORTANT: Don’t operate the steamer without the Hard Water lter in place. The condition of the lter aects the
performance of your steamer, check and change the lter periodically. If you live in a hard water area the lter will
discolour or darken over time. Depending on water hardness and frequency of use, the lter should be changed every
3-6 months (or if the lter has discoloured).
All cleaning pads are machine
washable (40°C Max) and
allow time to fully dry.
Changing the Hard Water lter
Remove water tank to
access the hard water lter.
Pull hard water lter
to remove.
New lter (cream coloured).
Hard water lter should be
replaced every 3-6 months or
if discoloured and darkened.
What to do if it goes wrong Getting in touch
There is an
accessory missing.
The steamer has
no power.
Why is the steamer
not producing steam?
SolutionProblem
• Check the ‘This pack contains’ panel on the box to make sure
the part is included with your machine.
• Check the On/O button has been pressed to On. The blue
light should illuminate when On.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always
replace with a British 13amp fuse.
• There may be no water in clean water tank, check the clean
water tank has water.
• Check the clean water tank is correctly tted.
Go to ‘Using your machine’.
• Check the hard water lter is in place, not damaged or blocked
and need replacing. Go to ‘Taking care of your machine’.
• Steam path may be blocked. Go to ‘Let’s talk technical’.
• The cleaning pad may already be saturated or dirty.
Wash the cleaning pad. Go to ‘Taking care of your machine’.
Why won’t the cleaning
pad pick up dirt?
• Steam coming from the side of the machine may indicate a
Why is steam coming
blockage within the steamer. To clear any blockages go to
‘Let’s talk technical’.
from the side of the
steamer?
CAUTION: Always switch o and unplug the steamer safely. Allow steamer to cool before performing maintenance
/troubleshooting checks
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the steamer before calling.
Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Accessories
Steam cleaning pads (Type 2)
1-1-133071-00
3x microbre cleaning pads. Drawstring attachment ideal for
everyday cleaning. Machine washable for continuous use.
Coral cleaning pads (Type 3)
1-1-131643-00
These microbre coral pads are super absorbent and are ideal for
removing stubborn stains. The pads attach to the steam cleaner using
a drawstring, to secure the pad in place over the steamer oorhead.
Pro cleaning pads (Type 6)
1-1-132319-00
3x Pro cleaning pads. Ideal for stubborn stain removal throughout
your home. These cleaning pads attach to the base of the steamer,
so it’s quick and easy to t and remove.
Microbre pet pads (Type 9)
1-1-133265-00
Microbre pet pads with one touch t system. Ideal for picking
up pet hairs. Machine washable for continuous use.
Steamer cleaning pads
1-1-131864-00
A pack of triangular steam cleaning pads for your Vax steam cleaner’s
triangular oorhead. Pack contains: 2x microbre cleaning pads,
2x coral pads.
Total Home pads
1-1-132528-00
Avoid cross contamination between dierent areas of your home with
this Total Home cleaning kit. Kit contains 8x coloured microbre cleaning
pads for all areas of your home.
@VaxUK
Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK
email: info@vax.co.uk website: vax.co.uk
Version 1.0
EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility,
declare that the S86-MC-C is manufactured in compliance with the following Directives: Safety: 2006/95/EC
Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
© 2014 All rights reserved. VAX®, VAX Lozenge are trade marks or registered trade marks of Techtronic Floor Care Technology Ltd.
Loading...