Steam Fresh Reach
Let’s get started
S85-SF-R
vax.co.uk
Let’s talk safety
Basic
safety
precautions
Don’ts
This steam cleaner is intended for household use only and
NOT for commercial or industrial use.
• Only use the steamer indoors and keep the area you’re
cleaning well lit.
• Keep ngers, hair and loose clothing away from moving parts
and openings whilst using the steamer.
• This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Don’t touch any hot areas/accessories on the steamer.
It’s normal for the steamer and accessories to heat up during
use, always turn o and allow them to cool down before
handling or changing.
• Don’t use on windows with extreme outside temperatures
to avoid stressing the glass surface. Excessive temperature
dierences between the glass window and the steam can
break the window.
• Don’t leave the steamer plugged in when unattended.
• Don’t use the steamer if it has been dropped, damaged,
immersed in water or left outdoors.
• Don’t run over the power cord or use steamer if the power cord
or plug is damaged. Please contact our Customer Care Line (UK)
0330 026 8455 (ROI) 1-800 928 308.
Do’s
• Always stand the steamer using the wall bracket or securely
against a wall/xed structure, alternatively lie at on the oor
in a suitable location so it does not become a trip hazard
or can be stepped on.
• Always ll the twin tank with water/Vax detergent only as per the
instructions in this user guide, never add perfume, stain remover
or products containing alcohol.
• Always vacuum your carpets thoroughly and make sure
hard oor areas are free from grit and debris before using
the steamer.
• Always unplug the steamer before carrying out any maintenance.
• Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Please refer to oor/surface manufacture’s care recommendations before
use, and test your ooring/carpet/rugs/surfaces by running the steamer over
a small hidden area. If no pile distortion or damage occurs continue cleaning.
Not suitable for use on wax polished oors or furniture, acrylic surfaces
and synthetics, velvet or steam/water sensitive materials.
• This steamer should not be used to clean electrical appliances such
as microwaves, televisions, electrical heating systems… etc.
• Only Vax recommended accessories and detergent should be used
with the steamer.
• Don’t handle the plug or use the steamer with wet hands.
• Don’t pull or carry the steamer by the power cord. Don’t use the power
cord as a handle, pull the power cord around corners and sharp edges
or close a door over the power cord. Don’t unplug steamer by pulling
on the power cord.
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to the steamer, remove blockages only as instructed in this guide.
• Don’t aim the steamer at people, animals, plants or electrical
components such as interior of ovens or wires. Never touch the
steam jet or accessories (there is a risk of scalding).
• Don’t use the steamer with incorrect voltage as this may result in damage
or injury to the user. The correct voltage is listed on the rating label.
• Always replace the fuse in the plug with a British 13amp fuse. Always protect
the power cord from heated surfaces or near open ames.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it could
be a trip hazard.
• Always carry the steamer by the handle.
• Store the steamer in a cool, dry area. Before storing the steamer please
ensure the twin tank is thoroughly clean and dry.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY
AS INSTRUCTED IN THIS GUIDE.
Thank you for buying this Steam Fresh Reach
Taking care of your sealed hard oors and surfaces
The Steam Fresh Reach is designed to make the regular cleaning of your home as eective
and ecient as possible. This user guide will help you get the most out of your machine.
Maintaining your home with the Steam Fresh Reach will ensure it is kept looking beautiful,
smell fresh and is hygienically clean.
Taking care of your Steam Fresh Reach
Also inside this guide are instructions on maintaining your new machine, so that
it is always ready to tackle your home when you are.
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd, Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich, WR9 OLW, UK
This User Guide can be found online at: vax.co.uk/support
Let us know what you think @VaxUK
Contents
Steam Fresh Reach
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Accessories
What to do if it goes wrong
Getting in touch
Included with
your machine
Vax Steam Detergent
2x Microbre Pad
Carpet Glider
Tool Storage Bag
Concentration Tool
Large Brush
Small Brush
Metal Brush
Grout Brush
Scraper Nozzle
Detail Nozzle
Upholstery/Window
/Shower Tool
Upholstery Cloth
Getting to know your machine
Control panel
Twin tank release button
Water tank
Detergent tank
Handheld release buttons
Steam reach wand
Handle
Power ON/OFF switch
Handheld
Quick release cord
hooks – Lower cord
hook does not rotate)
Nano head
Floorhead
Steam burst nozzle
Technical Specication
Name Steam Fresh Reach
Voltage Please refer to product rating label
Wattage Please refer to product rating label
Cord length 8m
Weight 5.5kg
Subject to technical change without notice.
Steam reach wand
release pedal
Steam burst button
Accessories & Consumables*
Microbre Cleaning Pads (Type 1)
1-1-131448-00
Hard Water Filter (Type 7)
1-1-133327-00
*To purchase consumables and accessories, please visit vax.co.uk
Getting started
Before you Begin
CAUTION: The steamer and accessories get very hot during use, always allow them to cool down before handling, or changing to
handheld or steam wand mode. Always switch o and unplug the steamer when assembling. Always switch o the steamer before
emptying the twin tank or changing the cloths/accessories.
CAUTION: This steamer is not free standing, always stand using the wall bracket or securely against a wall/xed structure,
alternatively lie the steamer at on the oor in a suitable location so it does not become a trip hazard or can be stepped on.
IMPORTANT: Please refer to oor/surface manufacturer’s care recommendations before use and test the steamer on a hidden
area to begin with. Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
When using the steamer, basic safety precautions should always be observed. Don’t aim the steamer at people, animals, plants,
and electrical components or wires. Never touch the steam jet or oorhead from a short distance (there is a risk of scalding).
The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will switch o.
If this happens switch o and unplug the steamer, allow to cool for a least 2 to 4 hours and re-try.
Assembling the steamer
Grip the steam reach
wand. Push the steam
reach wand down into
the oorhead until
it clicks into place.
Fixing the wall bracket
Grip the steam reach
wand. Push the handheld
down onto the steam
reach wand until it clicks
into place.
The steamer is not free standing and must always be
stood either in the wall bracket or safely and securely
against a wall or xed structure when not in use.
The wall bracket can be xed against
the wall by either adhesive strips or screw
Getting started
Fixing the wall bracket with adhesive strip
Fully assemble the unit and
position it against the wall
where it will be stored.
Stand the unit close and
upright against the wall.
Remove the
adhesive cover.
Firmly press the handheld and wall
storage clip to x the wall storage clip
to the wall in the correct place.
Fixing the wall bracket with screws
Fully assemble the unit
and position it against
the wall where it will
be stored.
Attach the wall
bracket to the handle.
Attach the wall
bracket to the handle.
Using one of the supplied screws,
screw the wall bracket to the wall
using the top screw hole.
Carefully remove
the unit from
the wall bracket
and use the other
screw to secure
the wall bracket
to the wall.
Using your machine
IMPORTANT: Always test on an inconspicuous area of ooring rst before using detergent. Don’t over ll the clean twin tanks
or exceed the maximum amount required. Don’t use the steamer without water in the water tank. Always top up with water
in good time.
CAUTION: This steamer is not free standing, when lling or carrying out any maintenance always stand securely against a wall/
xed structure or lie the steamer at on the oor in a suitable location so it does not become a trip hazard or can be stepped on.
Filling the twin tank
Press the twin tank
release button down,
grip the twin tank
and pull to remove.
Grip the twin tank and pull
the tab on the detergent
tank cap to open.
Grip the twin tank and
pull the tab on the water
tank cap to open.
Fill the detergent tank
up to the ll line with
water and top up with
detergent replace the cap
and push rmly to close.
Fill the water tank with
water. Replace the cap
and push rmly to close.
Before replacing the twin
tank make sure the hard
water lter is in place.
Line up the lip on the base
of twin tank with the main
body. Push in a hinge like
manner to click into place.
Important : If the twin
tank is not tted correctly
there will be a reduction
in the amount of steam/
detergent produced.
Using your machine
IMPORTANT: Never use the steam oor steamer without a microbre cleaning pad attached to the oorhead.
Never leave the oor steamer in one spot for an extended period of time or with a damp or wet microbre pad attached
as this may damage the oor surface.
CAUTION: This steamer is not free standing, always stand using the wall bracket or securely against a wall/xed structure
alternatively, lie the steamer at on the oor in a suitable location so it does not become a trip hazard or can be stepped on.
Using the oor steamer
Place the microbre
pad on the oor white
side facing up. Place the
oor head onto microbre
pad making sure the
microbre pad covers
the entire oorhead.
Press the button in the
centre of the control
panel to select steam
and detergent setting.
The light will illuminate
at the desired setting:
Max steam
Low steam
Max steam + detergent
Low steam + detergent
Plug the steamer into
mains power supply and
slide the On/O switch
to “On”.
Pull handle
backwards to recline.
The orange light will
illuminate to indicate
power on.
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the trigger
continuously to prevent
over wetting oors.
The green light will
illuminate to indicate
the steamer is ready
to use. The steamer
will automatically set to
Max steam (no detergent).
Move the steamer slowly
forwards and backwards
across the oor paying
particular attention
to high trac areas.
Squeeze/release trigger
to release steam
as required.
When the steamer is switched on the control panel will automatically set to max steam (no detergent).
TIP
Using your machine
For more concentrated steam use the steam boost.
For best results use max steam + detergent setting.
Press the steam boost button on the oorhead
to activate. Squeeze the trigger to release steam.
Press the steam burst button to switch o.
CAUTION: The steamer and accessories get very hot during use, always allow them to cool down before handling.
After cleaning, switch o and unplug the steamer.
Allow the steamer to cool down. Hold the corner
of the microbre pad down with your foot and lift
steamer to peel away.
Using the oor steamer with the Nano Head
Place foot on outer
oorhead and lift
steamer to release
the nano head.
To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger
continuously to prevent
over wetting oors.
Move the steamer
forwards and backwards
across the oor,
getting into corners
and awkward places.
For more concentrated steam use the steam boost.
For best results use Max steam + detergent setting.
Press the steam burst button on the oorhead
to activate. Squeeze the trigger to release steam.
Press the steam boost button to switch o.
Re-t the nano head
by lining up with
oorhead and pushing
rmly into place.
For best cleaning
results on stubborn
stains in awkward
places use the nano
head on the Max steam
detergent setting.
TIP
Using your machine
IMPORTANT: When using on carpets, always make sure the microbre cleaning pad covers the oorhead entirely
before using the carpet glider.
Only use the carpet glider when refreshing carpets.
Never leave the oor steamer in one spot for extended period of time or with a damp or wet pad attached
as this may damage the oor surface.
Refreshing carpets
Place the microbre
pad on the oor white
side facing up.
Place steamer onto
pad making sure the
entire pad covers
the oorhead.
Pull handle backwards
to recline.
With microbre pad
attached, slide the
oorhead into the carpet
glider, then push the
back of the oorhead
downwards into the clip
to secure. The carpet
glider should only be used
when refreshing carpets.
To produce steam squeeze
the trigger in short bursts.
To prevent over wetting
carpets avoid holding
the trigger continuously.
Plug the steamer into
mains and slide the
On/O switch to “On”.
The green light will
illuminate when it is ready
to use. The steamer will
automatically set to Max
steam (no detergent).
Move the steamer slowly
backwards and forwards
across the carpet.
To refresh your carpets
press the button on the
control panel to select
Steam only LOW.
Do not use detergent
when refreshing carpets.
Using your machine
When releasing the carpet
glider, ensure the steam
trigger is fully released
rst. To release the carpet
glider, place your foot on
the clip and press down.
Lift steamer out of the
glider to remove.
CAUTION: Always switch o the steamer and allow steamer to cool before attaching/detaching the steam wand, oorhead,
accessories and twin tank.
Always stand steamer securely against a wall/xed structure or lie the steamer at on the oor in a suitable location so it does
not become a trip hazard or can be stepped on.
When using the steam reach wand do not aim towards electrical components such as light ttings, sockets and wiring.
IMPORTANT: Always check the accessories are clean and free from debris, don’t use if damaged, broken or worn.
After refreshing carpets,
switch o and unplug
the steamer. Allow the
steamer to cool down.
Hold the corner of the
microbre pad down
with your foot and lift
steamer to peel away.
Using the steam fresh reach wand
2. ROTATE
1. PUSH
Press the steam wand
release pedal and pull
the steam wand and
handheld out of
the oorhead.
Use the arrows to align
the concentration nozzle
to the end of the steam
wand. Push the
concentration tool onto the
steam wand and
twist clockwise to lock
into position.
Plug the steamer into
mains and slide the
On/O switch to on.
The green light will
illuminate when it is ready
to use. The steamer will
automatically set to Max
steam (no detergent).
Press the centre pad
on the control panel
to select preferred
setting steam/detergent.
Using your machine
To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger
continuously to prevent
over wetting.
The Steam Reach wand can be used at dierent
heights for hard to reach places.
To improve your
comfort, use the
additional handgrip
on the handheld
to support the unit
and help you clean
dicult to reach areas.
TIP
CAUTION: Always switch o the steamer and allow to cool before attaching/detaching the steam wand, oorhead, accessories
and twin tank. Always stand securely against a wall/xed structure or lie the steamer at on the oor. When using the steam reach
wand do not aim towards electrical components such as light ttings, sockets and wiring.
IMPORTANT: Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.
Using the steam fresh reach handheld
2. ROTATE
1. PUSH
Standing behind the
unit, press the handheld
release buttons and
carefully release the
handheld from the
steam wand.
Place the steam wand
safely and securely
to one side against
a wall or xed structure.
Push the concentration
tool onto the handheld
and twist clockwise
to lock into position.
Plug into mains and
slide the On/O switch
to on. The green light will
illuminate when it is ready
to use. The steamer will
automatically set to Max
steam (no detergent).
Using your machine
Press the button
on the control panel
to select preferred
setting steam/detergent.
CAUTION: Always switch o the steamer before attaching/detaching the steam wand, oorhead, accessories and twin tank.
Always stand steamer securely against a wall/xed structure or lie the steamer at on the oor. The steamer and accessories
get very hot during use, always allow them to cool down before handling. Taps should be turned o when steaming around
them. Don’t steam clean ovens, oven surfaces or grills when hot, allow to cool to room temperature rst.
IMPORTANT: Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the
trigger continuously
to prevent over wetting.
To re-attach the handheld
to the reach wand, grip
the top of the steam wand,
remove the concentration
tool and line up handheld
with steam wand and push
down rmly until handheld
clicks into place.
To improve your
comfort, use the
additional handgrip
on the handheld
to support the unit
and help you clean
dicult to reach areas.
Attaching small accessory tools
TIP
Small accessory tools can be attached to the concentration
tool nozzle when using the reach wand or handheld.
First ensure the steam trigger is fully released, no steam
is comming out of the steamer and the concentration
nozzle has cooled down. Use the arrows to align the
accessory tool to the end of the concentration nozzle.
Twist accessory tool clockwise until locked into position
and secure. Turn anti-clockwise to remove.
After attaching your
chosen accessory tool
gently pull to make sure
it’s locked into place
TIP
Using your machine
Using the accessory tools
Concentration nozzle
Concentrated steam ow to lift grime.
Use on any sealed surface in the
home or car to tackle stubborn stains.
The nozzle allows a powerful jet of
steam to remove dirt in hard to reach
places. Use with handheld, wand and
also your connector for other tools.
Upholstery tool
Attach the cloth to the window/
shower tool for use on
upholstery and clothes.
Brushes
Hard-wearing for use on hard
sealed surfaces. Always test
a hidden area before use.
Grout brush
Wide straight brush to tackle grout
on tiled oors and surfaces.
Lifts embedded dirt from in between
tiles, and grouting. Use with the
handheld and wand.
Squeegee tool Window/shower tool
Clean your windows and mirrors
quickly and easily. The Squeegee
disperses steam evenly to clean then
swipe dry to avoid streaks. Use on
any glass surface including shower
doors, oven glass and in your car.
Use with handheld & wand
Carpet Glider
A detachable carpet glider accessory,
which adapts the oorhead and
enables you to make a seamless
transition between cleaning hard
oors and carpets. This can
be used on all carpeted areas
around the home.
Detail nozzle
For those hard to reach places
you can’t get to any other way.
This super-concentrated steam
nozzle ts in small crevices at
a 90 degree angle for easy access.
Use to clean taps, under rails and
radiators quickly and thoroughly.
Use with handheld and wand.
Scraper tool
Perfect for shifting dried on or
stubborn residue from ovens, work
surfaces, bathroom surfaces and
even pots and pans.
Metal Brush
Strong metal bristles to lift resilient
grime from tough surfaces.
Use when deep cleaning your oven,
wire racks or BBQ to make light work
of dicult cleaning tasks.
Not for use on soft or delicate
surfaces or material/upholstery.
Use with handheld and wand.
Taking care of your machine
CAUTION: Switch o the steamer and unplug from the mains. Allow the steamer to fully cool down before performing
any maintenance or troubleshooting checks.
Don’t leave water or detergent in the tanks between uses, as this can eect the steamer performance,
the water/detergent twin tanks need to be emptied and rinsed after each use.
Emptying the twin tank
Press the twin tank release
button, grip the twin tank
and pull to remove tanks.
Turn the twin tank over
to empty any excess
water and detergent
over the sink.
Grip the twin tank and pull
the tab on the water tank
cap to open.
Rinse the detergent tank with
water and replace both caps,
pushing rmly to close before
replacing the twin tank back
onto the steamer.
Cleaning the microbre cleaning pad
IMPORTANT: Don’t use bleach or fabric softener when washing the microbre cleaning pad.
Always switch o the steamer and allow the steamer to fully cool down before removing
the microbre cleaning pad.
Max 40°C
Hold the corner of the
microbre pad down
with your foot and lift
steamer to peel away.
The microbre pad
is machine washable
(Max 40⁰C) allow
to fully dry before use.
After cleaning, ensure
the microbre pad
is thoroughly dried
before using with
the mop steamer again
or storing.
TIP
Taking care of your machine
CAUTION: Switch o the steamer and unplug from the mains. Allow the steamer to fully cool down before performing
any maintenance or troubleshooting checks.
Cleaning the Nano Head
Press the steam wand
release pedal and pull
the steam wand
and handheld out
of the oorhead.
IMPORTANT: Don’t operate the steamer without hard water lter in place. The condition of the lter aects the performance
of your steamer, check and change lter periodically. Depending on water hardness and frequency of use, the lter should
be changed every 3 to 6 months.
Pull to remove
the nano head
from the oorhead.
Remove any dirt /debris
from the brushes and
wash under running water
(max 40 ⁰C) Leave to dry
before re-tting the nano
head onto the steamer.
Replacing the hard water lter
Press the twin tank
release button grip
the twin tank and pull
to remove tanks.
Use your thumb and index
nger to grip the hard
water lter. Pull the hard
water lter towards
you to remove.
Hard water lter
should be replaced
every 3 to 6 months.
Let’s talk technical
CAUTION: Switch o and unplug steamer, allow to fully cool down before performing maintenance or troubleshooting checks.
Clearing blockages from the handheld
Place the handheld on a rm surface and hold securely.
Grip the large end of the de-scaling pin, insert the pin
into the nozzle and push the de-scaling pin through.
Move the pin inwards and outwards to allow the tip
of the pin to unblock the nozzle
TAP
Remove the pin from
the nozzle. Holding the
handheld steamer
vertically, tap the nozzle
on a hard surface
to release any
mineral deposits.
TAP
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
2x Mircrobre Cleaning Pads (Type 1)
1-1-131448-00
Microbre cleaning pads, ideal to remove dirt and
grime. These cleaning pads attach to the base of the
steam mop, so it’s quick and easy to t and remove.
2x Microbre Pet Pads (Type 9)
1-1-133265-00
Microbre pet pads. Super absorbent, touch stain
removal and ideal for picking up pet hairs.
These cleaning pads attach to the base of the
steam mop, so it’s quick and easy to t and remove.
Pro Cleaning Pads (Type 6)
1-1-132319-00
3x pro cleaning pads. Ideal for stubborn stain
removal throughout your home. These cleaning
pads attach to the base of the steam mop, so it’s
quick and easy to t and remove.
Steam Mop Cleaning Pads
(1-1-131864-00)
2x microbre cleaning pads, Ideal to remove dirt and grime.
2x coral cleaning pads for your Steam mop cleaner.
Super absorbent and are ideal for removing stubborn stains.
Total Home
1-1-132528-00
8x microbre cleaning pads. Avoid cross
contamination between dierent areas
of your home with this Total Home Cleaning Kit.
Kit contains 8 x coloured microbre cleaning pads
for all areas of your home. Kit also contains a free
wash bag worth £9.99.
Hard Water Filter (Type 7)
1-1-136462-00
3x hard water lters to prevent the build-up of lime
scale deposits in hard water areas.
Steam Detergent Pet
1-9-132813-00
Vax Pet Steam Detergent cuts through grease and
grime, neutralises pet odours, and leaves your
oors smelling of Apple Blossom.
Steam Detergent Spring Fresh
1-9-132807-00
Vax Spring Fresh Steam Detergent cuts through
grease and grime, neutralises odours and
leaves your oors smelling Spring Fresh.
AccessoriesAccessories
Steam Detergent Lime Zest
1-9-132809-00
Vax Lime Zest Steam Detergent cuts through
grease and grime, neutralises odours, and leaves
your oors smelling of Lime Zest.
Steam Detergent Ocean Breeze
1-9-132811-00
Vax Ocean Breeze Steam Detergent cuts through
grease and grime, neutralises odours, and leaves
your oors smelling of Ocean Breeze.
What to do if it goes wrong
SolutionProblem
• Check the ‘This pack contains’ panel on the box to make sure
the part is included with your machine.
There is an
accessory missing?
• Check the On/O button has been switched to on. The red light
should illuminate when on. The green light will illuminate when
The steamer
has no power?
Why is the steamer
not producing steam?
product is ready to steam.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug. If this needs replacing, always replace
with a British 13amp fuse.
• There may be no water in twin tank. Fill the twin tank.
Go to ‘Using your machine’.
• Check the twin tank is correctly tted. Go to ‘Using your machine’.
• The water may not yet be at temperature, the green indicator light
will be illuminated when it is ready.
• Trigger on handle has not been pressed go to ‘Using your machine’.
The trigger may need to be pumped a few times before steam is visible.
• Check the hard water lter is in place, not damaged or needs replacing.
Go to ‘Taking care of your machine’.
• The oat in twin tank may be stuck. Shake handheld to release.
• Steam path may be blocked. Go to ‘Let’s talk technical’.
• Tools/accessories not correctly tted. Go to ‘Using your machine’.
• Check correct setting has been selected on control panel dial go to
‘Using your machine’.
Why is the steamer not
delivering detergent?
Why won’t the cleaning
• Check the detergent has been diluted to correct strength.
Go to ‘Using your machine’.
• Check the twin tank is correctly tted. Go to ‘Using your machine’.
• There may be no water/detergent mix in twin tank. Fill the twin tank.
Go to ‘Using your machine’.
• The cleaning pad may already be saturated or dirty.
Switch o the steamer, unplug from mains and allow to cool.
Then wash the cleaning pad. Go to ‘Taking care of your machine’.
pad pick up dirt?
Caution: Always unplug the steam cleaner before performing maintenance/troubleshooting checks
Getting in touch
†
Registration required. Terms and conditions apply, see vax.co.uk for details.
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.
@VaxUK
Vax Ltd., 5th Floor 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN, UK
email: info@vax.co.uk website: vax.co.uk
EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility,
declare that the S85-SF-R is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
© 2015 All rights reserved. VAX®, VAX Lozenge, are trade marks or registered trade marks of Techtronic Floor Care Technology Ltd.
Loading...