Vax S84-P1-B Instruction manual

CHANGE THE WAY
YOU STEAM CLEAN

LET’S GET STARTED.

S84-P1-B

Let’s talk safety

Basic
safety
precautions

Don’ts

This steamer is intended for household use only and NOT
for commercial or industrial use.

Only use the steamer indoors and keep the area you’re cleaning
well lit. Keep ngers, hair and loose clothing away from moving
parts and openings whilst using the steamer.

• This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance.

• Don’t touch any hot areas/accessories on your steamer.
It’s normal for the steamer and accessories to heat up during
use, always allow them to cool down before handling.

• Don’t leave the steamer turned on when unattended.

• Don’t use the steamer if it has been dropped, damaged,
immersed in water or left outdoors.

• Don’t run over the power cord or use steamer if the power cord
or plug is damaged. Please contact our Customer Care Line (UK)
0330 026 8455(ROI) 1-800 928 308.

• Don’t handle the plug or use the steamer with wet hands.

• Don’t pull or carry the steamer by the power cord.

• Please refer to oor manufacturer’s care recommendations before use,
and test your ooring/carpet/rugs/surfaces by running the steamer over
a small hidden area, if no pile distortion or no damage occurs continue
cleaning. Not suitable for use on wax polished oors or furniture, acrylic
surfaces and synthetic, velvet or steam/water sensitive materials.

• This steamer should not be used to clean electrical appliances such
as microwaves, televisions and electrical heating systems etc.

• Only Vax recommended cloths and accessories should be used
with this steamer.

• Don’t use the power cord as a handle, pull the power cord around corners
or sharp edges or close a door over the power cord. Don’t unplug the
steamer by pulling on the power cord.

• Don’t attempt to remove blockages with sharp objects as this may cause
damage to the steamer, remove blockages only as instructed in this guide.

• Don’t aim the steam cleaner at people, animals, plants and electrical
components or wires. Never touch the steam jet (there is a risk of scalding).

• Don’t use the steamer with incorrect voltage as this may result in damage
or injury to the user. The correct voltage is listed on the ratings label.

• Don’t use the steamer to clean or refresh any items of clothing that
are still being worn on the body.

Do’s

• Always make sure the 360⁰ Connector and accessories are
securely connected to the handheld before use.

• Always ll the tank with water only. Never add perfume, stain
remover or products containing alcohol. Filling the tank with
hot or boiling water will damage the steamer and invalidate
the guarantee.

• Always make sure the tanks are tted correctly before
using the steamer.

• Always vacuum your carpets thoroughly and ensure hard oor
areas are free from grit and debris before using your steamer.

• Always carry the steamer by the handle.

• Always unplug the steamer before carrying out any
maintenance or when unattended.

• Turn o all controls on the steamer before disconnecting or connecting
the power cord, after use always wrap the power cord around the cord
clips provided.

• Take extra care when cleaning on the stairs.

• Always replace the fuse in the plug with a British 13amp fuse.

• Always protect the power cord from heated surfaces and near open ames.

• Use only CE approved 13amp extension cords, non-approved extension cords
can overheat. Care should be taken to arrange the extension cord as it could
be a trip hazard.

• Store the steamer in a cool, dry area away from children. Before storing the
steamer please make sure the tank is thoroughly empty and clean.

PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY
AS INSTRUCTED IN THIS GUIDE.

Thank you for buying this Steam Switch

Contents

Steam Switch

Taking care of your sealed hard oors and surfaces

The Steam Switch is designed to make the regular cleaning of your home as eective
and ecient as possible. This user guide will help you get the most out of your machine.

Maintaining your home with the Steam Switch will ensure it is kept looking beautiful
and is hygienically clean.

Taking care of your Steam Switch

Also inside this guide are instructions on maintaining your new machine, so that
it is always ready to tackle your home when you are.

Taking care of you

We’re here if you need us. Instead of taking me back
to the shop, simply visit:

vax.co.uk/support or call:

(UK) 0330 026 8455 (ROI) 1-800 928 308

Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm

Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.

Alternatively, you can write to us at:

Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich,
Worcestershire, WR9 0LW, UK

This user guide can be found online at: vax.co.uk/support

Let’s talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

Notes

Accessories

What to do if it goes wrong

Getting in touch

Included with
your machine

Microbre Pad

Carpet Glider

Accessory Bag

360⁰ Connector

Precision Tool

Soft Scrub Brush

Let us know what you think @VaxUK

Getting to know your machine Getting started

Trigger

Handle

Handheld handle

Handheld trigger

Tank release buttons

Quick release cord hooks

Handheld release button

Steam ready indicator

Main body

Before you Begin
CAUTION: The steamer and accessories get very hot during use, always allow them to cool down before handling.

Always unplug the steamer when assembling. Always unplug the steamer before emptying the tank or changing the
cloths/accessories.

IMPORTANT: Please refer to oor/surface manufacturer’s care recommendations before use and test the steamer
on a hidden area to begin with. Test for colour fastness in a small hidden area of upholstery/fabric to check for colour
removal before use. When using the steamer, basic safety precautions should always be observed.

Don’t aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet or oorhead
from a short distance (there is a risk of scalding). The steamer is equipped with a thermostat and a thermal cut-out.
If for any reason the steamer overheats it will switch o. If this happens unplug the steamer, allow to cool for a least
2 to 4 hours and re-try.

Assembling the steamer

Push the main body down into the
oorhead until it clicks into place.

Stand the stick steamer upright
by pushing the main body
forward to lock into position.

Push the handle into main body
until it clicks into place.

Tank

Floorhead release button

Technical Specication

Name Steam Switch
Voltage Please refer to product rating label
Wattage Please refer to product rating label
Water tank capacity 0.36L
Cord length 7m
Weight 3.5kg

Subject to technical change without notice.

Floorhead

Accessories & Consumables*

Clean & Scrub Kit (Type 1)

1-1-137101

Multi-Surface Kit (Type 1)

1-1-137103

360° Window Pads

1-1-137252

*To purchase consumables and accessories, please visit vax.co.uk

360° Scrub Pads

1-1-137251

360° Flexi-Tool Socks

1-1-137250

Hard Water Filter (Type 7)

1-1-136462

Using your machine Using your machine

IMPORTANT: Don’t over ll the tank. Don’t use the steamer without water in the tank. Always top up with water in good time. WARNING: Always unplug the steamer when tting the microbre cleaning pads.

IMPORTANT: Never use the steamer without a cleaning pad attached to the oorhead. Never leave the steamer on one spot

for an extended period of time or with a damp or wet microbre pad attached as this may damage the oor surface.

Filling the tank Using the steam mop

Grip the handle press the tank
release buttons and pull the
tank to remove.

Line up the tank with the machine,
push the tank until it clicks into place.

Pull the tab on the tank cap to open.
Fill the tank with water. Replace the
cap and push rmly to close.

Important: If the tank is not tted
correctly there will be a reduction
in the amount of steam produced.

Before replacing the tank make
sure the hard water lter which is
located behind the tank is in place.

Place the microbre pad on the
oor with the tab side facing up.
Place the oorhead onto microbre
pad making sure the microbre
pad covers the entire oorhead.

To produce steam squeeze the
trigger in short bursts. Don’t hold
the trigger continuously to prevent
over wetting oors.

Plug into mains. The blue light will
illuminate to indicate power on.
The green light will illuminate to
indicate the steamer is ready to use.

Move the steamer slowly backwards
and forwards across the oor
paying particular attention to high
trac areas. Squeeze/release
trigger as required.

Place your foot onto the
oorhead and pull the
handle backwards to recline.

After cleaning, return steamer
to upright position, lock into place
and unplug the steamer.
Allow the steamer to cool down.
Hold the corner of the microbre
pad down with your foot and lift
steamer to peel away.

If the area you
are cleaning is
becoming too wet,
squeeze the trigger
in short bursts.

TIP

Using your machine Using your machine

IMPORTANT: When using on carpets, always make sure the microbre cleaning pad is used and covers the oorhead entirely
before using the carpet glider. Only use the carpet glider when refreshing carpets.

WARNING: Always unplug the handheld before attaching/detaching the 360⁰ connector and tool to the handheld. The steamer and
accessories get very hot during use, always allow them to cool down before handling.

IMPORTANT: Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.

Refreshing carpets Using the handheld steamer

Place the microbre pad
on the oor with the tab side
facing up. Place steamer onto the
pad making sure the entire pad
covers the oorhead.

Place your foot on oorhead and
pull handle backwards to recline.

With microbre pad attached,
push the oorhead into front
of the carpet glider, then place
back of the oorhead into the clip.
The carpet glider should only
be used when refreshing carpets.

To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger continuously
to prevent over wetting carpet.

Plug into mains. The blue light will
illuminate to indicate power on.
The green light will illuminate to
indicate the steamer is ready to use.

Move the steamer slowly backwards
and forwards across the carpet
paying particular attention to high
trac areas. Squeeze/release
trigger as required.

Press the handheld release
button and gently pull the
handheld from the main body.

Attach the chosen tool to the 360⁰
connector before attaching both the
connector and tool to the handheld.

Before use, remove tank, ll
with water and replace tank
to handheld unit.

Line up the edge of tool with the
360⁰ connector. In a hinge like
manner, push tool on to 360⁰
connector until it clicks
securely into place.

Choose a tool.

Push the 360⁰ connector with tool
attached into the handheld nozzle
until it clicks into place. Make sure
the locking clip is securely attached
by gently pulling the 360⁰ connector.

To release the carpet glider, place
your foot on clip and push down.
Lift steamer to remove.

If the area you
are cleaning is
becoming too wet,
squeeze the trigger
in short bursts.

TIP

Plug into mains. The blue light
will illuminate to indicate power
on. The green light will illuminate
to indicate the steamer is
ready to use.

To produce steam squeeze
the trigger.

Taking care of your machineUsing your machine

CAUTION: Always ensure machine is o before attaching/detaching the, oorhead, accessories and tank.
The steamer and accessories get very hot during use, always allow them to cool down before handling. Taps should
be turned o when steaming around them and sinks should be empty. Don’t steam clean ovens, oven surfaces or grills
when hot, allow to cool to room temperature rst.

Attaching and detaching handheld tools

Attach the chosen tool to the 360⁰
connector before attaching both
connector and the tool
to the handheld.

Hook tool onto 360⁰ connector.
In a hinge like manner, attach tool
to 360⁰ connector until it clicks
securely into place.

1 2 3 4

Using Tools

Precision Tool

Ideal for hard to access areas
such as in corners or around taps.
The concentrated jet of steam
penetrates heavily soiled areas
removing soap scum in baths and
shower enclosures and blasting
away grease and grime from hobs
and cookers.

See the accessories section for additional tools and accessories.

Soft Scrub Brush

Agitates dried on grease and
grime and removes build up of
dirt. Perfect for use on cookers
and hobs, sinks, taps, worktops
and more with minimal eort. The
soft bristles tackle dirt and are
ideal for more delicate surfaces.
The integrated scraper edge helps
remove stubborn dried on stains
without having to change the tool.

Push and twist the rotation collar to select the most suited cleaning angle for the chosen tool. There are four
positions on the rotation collar for easier cleaning.

Reattaching handheld

To remove the tool from the 360⁰
connector lift and push the clip on
the top of the tool (The tools get
very hot during use, always allow
them to cool down before handling).

Press the unlocking button
on the 360⁰ connector and
pull to remove from handheld.

To re-attach the handheld, insert
nozzle in to main body of the
steamer. Slide the handheld back
into the main body until it clicks into
place taking care not to trap the
power cord.

IMPORTANT: Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks.
Don’t leave water in the tank between uses, as this can eect the steamers performance, the tank should be emptied

and rinse with clean water after each use.

Emptying the tank

Grip the tank press the tank release
buttons and pull he water to remove.

Pull the tab on the tank cap to open.
Empty any excess water in the sink.

Rinse the tank with clean water and
replace cap, pushing rmly to close
before replacing the tank back onto
the steamer.

Taking care of your machineTaking care of your machine

Cleaning the microbre cleaning pad

IMPORTANT: Don’t use bleach or fabric softener when washing the microbre cleaning pad. Always allow the steamer
to fully cool down before removing the microbre cleaning pad.

Max 40°C

Hold the corner of the microbre
pad down with your foot and lift
steamer to peel away.

IMPORTANT: Don’t operate the steamer without hard water lter in place. The condition of the lter aects the performance
of your steamer, check and change lter periodically. Depending on water hardness and frequency of use, the lter should
be changed every 2-3 months.

Replacing the hard water lter

The microbre pad is machine
washable (Max 40⁰C), allow
to fully dry before use.

Also available 360° Steam Tools

Order at: www.vax.co.uk/spares-and-solutions

360° Steam tools provide everything you need to clean a multitude of surfaces – rotating at 4 angles through 360°, they
do the twisting so you don’t have to.

Below is a selection of other 360° steam tools for you to enhance your steam cleaning experience. We have also put
together some handy tool kits on the next few pages.

The Pads

Tackle everyday surfaces easily with the 360° cleaning pads. Both are easy to attach and detach, and machine-washable
for re-use.

Microbre Pad

The microbre pad captures dirty water and spills, and is
ideal for cleaning a variety of surfaces.

Uses: worktops, sinks, cupboards, tables, doors, shelves
and much more.

Pro Cleaning Pad

The pro cleaning pad has a textured surface to tackle
stuck-on dirt, and is ideal for those grimier jobs.

Uses: oven doors, hobs, tiles, baths, child seats, work
surfaces and much more.

Grip the tank press the tank release
buttons and pull the tank to remove.

WARNING: Unplug steamer, allow to fully cool down before performing maintenance or troubleshooting checks.
WARNING: To prevent damaging the steamer DO NOT insert any sharp implements into the nozzle on the handheld unit.

Pull to remove the hard water lter,
located on side, behind tank where
the tank would sit.

The hard water lter should
be replaced every 2-3 months.

Blockages

Water may be released through the
bleed valve located on the back of the
handheld when there is a blockage. If
this occurs, refer to the section ‘What
to do if it goes wrong’.

The Brushes

The 360° steam brushes help you tackle dirt and grime. They are easy to attach and detach, with a rounded bristle head
that makes reaching awkward angles and small crevices even easier.

Deep Scrub Brush

The deep scrub brush has tough, strong bristles that
help tackle more stubborn dirt and grime. The specially
designed ‘scraper edge’ helps you to remove stuck-on dirt
without changing tools.

Uses: oven doors and hobs, grills, taps, work surfaces and
much more.

Grout Brush

The grout brush is the tool you need for tackling dirt,
mould and mildew on tile grout. The slim bristle head
design means you can target the grout line with ease.

Uses: tile grout in all areas.

Accessories Accessories

The Window Tool

The window tool is perfect for cleaning glass and other
mirrored surfaces. It is designed to give edge to edge
steam distribution, for a more even steam clean. Use with
the squeegee side rst to clean and wipe away excess
water, and then rotate to use the window pad to dry
the surface. The pad is easy to attach and detach, and
machine-washable for re-use.

Uses: windows, shower screens, tiles, mirrors and other
similar surfaces.

The Flexi-Tool

The exi-tool is our ultimate steam cleaning tool for a
multitude of tasks. The long, thin, exible design helps to
reach into crevices or tackle large at surfaces quickly.
It comes with 2 coloured Microbre Socks (one for
upholstery and one for hard surfaces), allowing you to
easily switch between cleaning tasks.

Uses: between blinds, kitchen appliances and cupboard
door handles, as well as worktops, cupboards, curved
shower screens, curtains, car seats and much more.

IMPORTANT: Always support the handheld by the handle when using the hose.

The Flexible Extension Hose

The exible extension hose attaches to your handheld
to provide some extra cleaning reach. Use with the 360°
connector and steam tools for high or hard to reach areas.

Attaching and detaching the hose

360° Steam Tools

Clean & Scrub Kit (Type 1)
1-1-137101

All you need to clean and scrub at all angles. 360° Steam Tools
provide full rotational cleaning. This kit includes: 1 x Pro Clean pad
and 1 x Microbre pad for general cleaning, 1 x Deep Scrub Brush,
1 x Soft Scrub brush and 1 x Grout Brush for cleaning tough stains
around the home. A free accessory bag is also included.

Multi-Surface Kit (Type 1)
1-1-137102

All you need to tackle awkward crevices and a multitude
of surfaces around the home. 360° Steam Tools provide full
rotational for cleaning at all angles. The kit includes: 1 x Window
tool and pad (for glass, mirrored or shiny surfaces), 1 x Deep
Scrub Brush and 1 x Grout Brush, 1 x Extension Hose (for extra
exible reach) and 1 x Flexi-Tool with 2 x Microbre Socks
(for tackling a multitude of surfaces and awkward nooks and
crannies). A free accessory bag is also included.

360° Window Pads
1-1-137252

Contains 4 x replacement window pads for your
360° Window Tool. Pads are machine washable.

360° Scrub Pads
1-1-137251

Contains 4 x replacement Microbre Pads and
4 x replacement Pro Cleaning pads.
Pads are machine washable.

Push the end of the hose with the
locking clip into the handheld nozzle
until it clicks into place. Make sure
the locking clip on the exi-hose is
securely attached by gently pulling
the exi-hose.

Push and attach the 360⁰ connector
with tool attached into the other end
of the exi-hose until it clicks into
place. Make sure the locking clip is
securely attached by gently pulling
the 360⁰ connector.

360° Flexi-Tool Socks
1-1-137250

Contains 2 x replacement Microbre Socks for your
360° Flexi-Tool. Socks are machine washable.

Press the unlocking button on the
exi-hose and pull to remove the
hose from handheld.

PLEASE NOTE: Actual colours of accessories may vary.

Don’t forget your accessories!

Order at: www.vax.co.uk/spares-and-solutions

AccessoriesAccessories

2x Microbre Cleaning Pads (Type 1)
1-1-131448

Microbre cleaning pads, are ideal to remove dirt and
grime. These cleaning pads attach to the base of the
steam mop, so it’s quick and easy to t and remove.
They capture spillages and are machine washable.

2x Microbre Pet Pads (Type 9)
1-1-133265

Microbre pet pads. Super absorbent and ideal
for picking up pet hairs. These cleaning pads
attach to the base of the steam mop, so they
are quick and easy to t and remove. They are
also machine washable.

Pro Cleaning Pads (Type 6)
1-1-132319

3x Pro Cleaning pads. Their textured surfaces is
ideal for stubborn stain removal throughout your
home. These cleaning pads attach to the base of
the steam mop, so they are quick and easy to t and
remove. They are also machine washable.

Steam Mop Cleaning Pads
1-1-131864

2x microbre cleaning pads, Ideal for removing dirt and grime.
2x coral cleaning pads textured surfaces.
Both are super absorbent and ideal for removing
stubborn stains. They are also machine washable.

Total Home
1-1-132528

8x microbre cleaning pads. Avoid cross
contamination between dierent areas
of your home with this Total Home Cleaning Kit.
Kit contains 8 x coloured machine washable microbre
cleaning pads for all areas of your home.
Kit also contains a free wash bag worth £9.99.

Hard Water Filter (Type 7)
1-1-136462

3x hard water lters to prevent the build-up of lime
scale deposits in ideal for hard water areas. Replace
lters regularly to maintain optimum performance.

What to do if it goes wrong Getting in touch

SolutionProblem

• Check the ‘This pack contains’ panel on the box to make sure
the part is included with your machine.

There is an
accessory missing

• The plug may not be fully pushed into the electrical socket.

• Check the fuse in the plug to see if it needs replacing. Always replace

The steamer
has no power

Why is the steamer
not producing steam?

with a British 13amp fuse.

• There may be no water in tank, ll the tank.

• Check the tank is correctly tted. Go to ‘Using your machine’.

• The water may not yet be at temperature, the green indicator light will
illuminate when it is ready.

• Trigger on handle has not been pressed in mop mode. Go to ‘Using
your machine’.

• Check the hard water lter is in place, not damaged or needs replacing.
Go to ‘Taking care of your machine’.

• The water pipe on tank may be stuck. Shake handheld to release.

• Tools/accessories not correctly tted. Go to ‘using your machine’.

• The cleaning pad may already be saturated or dirty,
wash the cleaning pad. Go to ‘Taking care of your machine’.

Why won’t the cleaning
pad pick up dirt?

• May be a blockage in the handheld.

Why is water being
released from the back

• Check the tools are clean and free from debris. Rinse tools under running
water. Retry machine. If water continues to be released, contact us.

of the handheld unit?

Caution: Always unplug the steam cleaner and allow to cool before performing maintenance/

troubleshooting checks.

†

Registration required. Terms and conditions apply, see vax.co.uk for details.

* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.

NotesNotes

GET IN TOUCH

0330 026 8455 [e-mail] vax.co.uk @Vax UK

EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the
S84-P1-B manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive.
EMC: 2004/108/EC Electromagnetic Compatibility Directive.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice.

© 2015 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge is the property of Techtronic Floor Care
Technology Ltd and is registered in the EU and may be pending or registered in other countries.