Vax Mach 9 User Manual

Download

---

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 OQH, UK

email: info@vax.co.uk - website: vax.co.uk

Version 1.0

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 12

– – – – –

Get Cleaning...

What’s your Vax model number? (Located on the top flap of the packaging)

What’s your serial number? (Located on the base of the machine)

Note these down in case you need them in future. Please keep instructions for further use.

e.g. U8 8 -M 9 - B

vax.co.uk

Bagless Upright

Mach 9

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

User Guide

Mach 9

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 1

---

Unit

Accessories Filters

Machine Overview

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

Handle 2 On/off button 3 Quick release cord hook 4

Dirt container release button 5 Carry/dirt container handle 6 Dirt container lid 7

Dirt container 8

Primary separator 9 Exhaust filter cover

10 Brushbar height adjust 11 Cord 12 Cord safety hook 13 Hose 14 Extension tube 15 Floor/tool selector dial 16 Crevice tool 17 Dusting brush 18 Unit recline pedal 19 Pre-motor filter

20 HEPA post-motor filter (hidden)

PLEASE NOTE: some parts may vary according to model. Please check inside flap of box for more details.

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 2

FOR HOUSEHOLD USE ONLY.

hen using the vacuum cleaner, basic safety precautions should always

be observed, including the following:

1. Only use the vacuum cleaner indoors on dry surfaces.

2. Turn off the vacuum cleaner controls before disconnecting or connecting from the mains supply.

3. Always unplug the vacuum cleaner before connecting or disconnecting the vacuum hose and accessories.

4. Children should be supervised to ensure that they do not play with t

he appliance.

5. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

6. Use only as described in this manual. Use only Vax recommended attachments.

7. Do not use the vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into water. Do not use the vacuum cleaner with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer or a recommended Service Agent to avoid hazard and invalidating the guarantee.

8. Do not pull or carry by cord/hose. Do not use the cord/hose as a handle, close a door on the cord/hose or pull cord/hose around sharp edges or corners. Do not run the vacuum cleaner over the cord/hose. Keep the cord away from heated surfaces.

9. Do not handle the plug or vacuum cleaner with wet hands. Do not use outdoors or on wet surfaces.

10. Do not put any objects into openings. Do not use with any openings blocked and do not restrict air-flow. Keep all openings free of dust, lint, hair or anything that might reduce airflow.

11. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.

12. Do not pick up hot coals, cigarette butts, matches or any hot, smoking or burning objects.

13. Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene etc.) or use in the presence of explosive liquids or vapours.

14. Do not vacuum up harmful or toxic material (chlorine, bleach, ammonia, drain cleaner etc.).

15. Do not vacuum up hard or sharp objects such as glass, nails, screws, coins, etc.

16. Do not use without ALL of the filters in place.

7. Take extra care when vacuuming on stairs.

18. Keep vacuuming area well lit.

9. Store the vacuum cleaner in a cool, dry area.

0. Turn off the on/off switch before unplugging the vacuum cleaner

21. Use only CE-approved 13 amp extension cords. Non-approved cords may overheat. Care should be taken to arrange the cord so that the cord cannot be tripped over.

WARNING: Always switch off and unplug the vacuum c

leaner from the electrical outlet before assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments.

CAUTION: The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical outlet, make sure the switch is in the ‘off’ position.

IMPORTANT: If the inlet, hose or extension tube is blocked,

switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. See Maintenance; Clearing Blockages.

IMPORTANT: Cleaning filters maintains vacuum

performance. Vax recommends that your filters should be checked and cleaned periodically. If your filters are washable make sure they are completely dry before inserting back into the vacuum cleaner.

IMPORTANT:

The motor is equipped with a thermal cut-out.

If for any reason the unit should overheat, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum cleaner from the electrical outlet and turn off the switch. Remove dirt container and empty. Clean filters. Allow the unit to cool for approximately one (1) hour. To re-start, plug into an electrical outlet and switch back on.

This vacuum cleaner is intended for household use only and NOT for commercial or industrial use.

PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.

!!!!!

General Safety Information

vax.co.uk

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 3

---

Assembling the appliance

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

Operation

Remove cardboard and screw from rear of the handle.

Insert extension tube into holder and push dusting brush into area shown.

Align tabs on hose to slots in lower hose holder.

Rotate hose left until locked into place.

Push hose handle into holding bracket.

Insert handle onto main unit and secure with screw provided using a crosshead screwdriver.

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 4

vax.co.uk

Operating the appliance

Operation

IMPORTANT: Vax recommends that you raise the height of the brushbar to the highest position when using

this cleaner on lino and hard flooring due to constant rotation. Vax cannot be held responsible for damage

to these surfaces if the customer fails to take notice of this recommendation.

IMPORTANT: When the vacuum cleaner is stood in the upright position, or when using the hose and tools, the brushbar height adjust must be set to the highest position.

Twist cord storage hook to release cord.

OOLS

LOOR

When vacuuming floors, ensure the floor/tool selector dial is on the floor position.

Press unit recline pedal with foot while pulling back the handle to recline into operating position.

Turn on vacuum by pressing the button on the handle.

In upright position turn brushbar height adjust to desired setting.

Short carpet pile High carpet pile Hard floor

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 5

---

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

Operation

NOTE: The crevice tool and dusting brush can only be attached to extension tube. NOTE: This unit has a constantly rotating brushbar. Vax recommends you raise the brushbar to high carpet pile

setting before attaching accessories.

Using tools

L O

Turn floor/tool selector dial to the tools position when using tools.

Pull hose out of hose holding bracket using the hose handle.

Remove extension tube from holder. Attach extension tube to hose.

Choose an accessory, then attach to extension tube.

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 6

vax.co.uk

Maintenance (Keep your Vax as good as new)

Emptying the dirt container

Cleaning the pre-motor filter.

24hr

40° C

max

Keep your Vax like new

IMPORTANT: The condition of the filters affects the performance of your machine.

Please check and clean/wash filters periodically (depending on the level of use).

IMPORTANT: Do not use the vacuum cleaner without all of the filters in place.

!!!

IMPORTANT: Wash foam only.

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 7

---

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

Maintenance (Keep your Vax as good as new)

Replacing the HEPA post-motor filter

IMPORTANT: The HEPA post-motor filter will discolour with use. It

should be replaced regularly depending on level of use. For optimum performance we recommend replacing your filter every 9-12 months. The filter CANNOT be washed.

Cleaning the primary separator

40° C

max

24hr

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 8

Removing blockages

WARNING: To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical

outlet before performing maintenance/troubleshooting checks. Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.

Replacing the brushbar belt

vax.co.uk

Maintenance (Keep your Vax as good as new)

Unscrew the 4 screws from the base of the unit using a crosshead screwdriver.

Remove floor nozzle cover. Lift brushbar and remove

belt from the end of the brushbar.

Squeeze tabs to remover dial cover.

Pull dial towards you. Clean and remove any

debris from inside.

Remove lower hose and check for blockages.

Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 9

---

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

FAQs

WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks.

Is there an accessory missing?

• Check the ‘Parts Overview’ page in this guide to make sure the part is definitely included in your unit.

• If it is missing, we’re here to help. Simply call us on

0844 412 8455

Why won’t the vacuum cleaner pick up?

• The dirt container may be incorrectly installed; remove the dirt container from the unit by pressing the dirt container release button and then reattaching it to the unit, ensuring it is locked firmly back into place.

• The filter may be clogged; refer to ‘Maintenance: Cleaning the filters’ on page 7.

• The dirt container may be blocked; refer to ‘Maintenance: Emptying and cleaning the dirt container’ on pages 7 and 8.

• There may be a blockage in the hose/tube; disconnect from the vacuum cleaner. Carefully remove any blockages found and reconnect securely.

Why is dust escaping from the vacuum?

• The filter may be clogged; refer to ‘Maintenance: Cleaning the filters’ on pages 7 and 8.

• The dirt container may be blocked; refer to ‘Maintenance: Emptying and cleaning the dirt container’ on page 7.

What do I do if the unit/an accessory becomes damaged or broken?

• We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk

Why won’t the accessories pick up properly?

• Hose blockages: remove the hose from the unit. Carefully remove any blockages found and reconnect hose securely.

• Accessory blockages: remove accessory from handle/tube. Carefully remove blockage and reattach to the vacuum cleaner.

• The accessory may be faulty. Simply call us on

0844 412 8455 for assistance.

Why will the vacuum cleaner not run?

• It may not be plugged into the electrical outlet correctly; ensure that the plug is pushed in securely.

• The electrical outlet may not be working properly; check the fuse or breaker, or consult an electrician.

• The motor thermostat may have tripped; switch off and unplug the vacuum cleaner, and leave for one hour before switching the cleaner back on.

(UK) 0844 412 8455

(ROI) 1-800 928 308

vax.co.uk

vaxireland.ie

This does not aect your statutory rights

Instead of taking me back

to the shop, simply call:

Vax Mach 9 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual