H85-AC21-B
H85-AC21-P
H85-AC21-BB
CORDLESS, 2-IN-1,
STICK AND HANDHELD
LET’S GET STARTED.
AirTMCordless
SWITCH
Let’s talk safety
Basic
safety
precautions
Don’ts
Do’s
This vacuum cleaner is intended for household use only and
NOT for commercial or industrial use. It is a battery-operated
appliance, the battery being charged outside the appliance.
• Only use the vacuum cleaner indoors and keep the area
you’re cleaning well lit.
• Keep ngers, hair and loose clothing from moving parts
and openings whilst using the vacuum cleaner.
• Keep the charger and battery in a dry place and use them
indoors only.
• Don’t use this vacuum cleaner if it has been dropped,
damaged, immersed in water or left outdoors.
• Don’t handle the charger plug or use the vacuum cleaner
with wet hands.
• Don’t run over the charger cord or use the vacuum cleaner
if the charger cord or plug is damaged. Please contact
our Customer Care Line on: 0330 026 8455 (Mon-Fri 8:30am
to 6:30pm, Sat 9:00am to 5:00pm).
• Always make sure the lter and dirt container are tted
correctly before using your vacuum cleaner.
• Always turn o and unplug the vacuum cleaner from
the charger before carrying out any maintenance.
• Turn o all controls on the vacuum cleaner before
disconnecting or connecting the battery.
• Take extra care when cleaning on the stairs.
• Always replace the fuse in the plug with a British 3amp fuse.
• This vacuum cleaner can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the vacuum cleaner in a safe way and understand the
hazards involved. Children should not play with the vacuum cleaner. Cleaning
and user maintenance should not be made by children without supervision.
• Only Vax recommended tools and accessories should be used with
this vacuum cleaner.
• If the charger cord is damaged, it must be replaced by the manufacturer,
a service agent or similarly qualied persons in order to avoid a hazard.
• Don’t attempt to remove blockages with sharp objects as this may
cause damage to your vacuum cleaner.
• Don’t use the vacuum cleaner with incorrect voltage as this may
result in damage or injury to the user. The correct voltage is listed
on the ratings label.
• Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning
items or use in an area where there may be harmful uids (chlorine, bleach,
and ammonia drain cleaner).
• Don’t try to short the terminals of the battery and the charger.
• Always protect the charger cord from heated surfaces or near open ames.
• Use only CE approved 13amp extension cords, non-approved extension
cords may overheat. Care should be taken to arrange the extension cord
as it can be a trip hazard.
• Always carry the vacuum cleaner/handheld by the correct carry handle.
• Store your vacuum cleaner, charger and battery in a cool, dry area.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.
Thank you for buying this Air™ Cordless Switch.
Taking care of your carpets and hard oors.
The Air™ Cordless Switch is designed to make vacuuming your oors regularly, as eective and
ecient as possible and this user guide will help you get the most out of your machine.
Maintaining your carpets and hard oors will ensure they keep their appearance for longer.
You’ve chosen the carpets and hard oors for your home for a reason and Vax will help you take
good care of them.
Taking care of your Air™ Cordless Switch
Also inside this guide are instructions on maintaining your new machine, so that it’s always ready
when you are to tackle your carpets and hard oors.
Let us know what you think @VaxUK
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich,
Worcestershire, WR9 0LW, UK
This user guide can be found online at: vax.co.uk/support
Contents
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
Accessories
What to do if it goes wrong
Getting in touch
Included with
your machine
Air™ Cordless Switch
LithiumLifeTM Battery*
Battery Charger
Crevice Tool
Stair tool (Comes with
H85-AC21-P only)
*H85-AC21-BB comes
with LithiumLife Extended
Runtime Battery.
Getting to know your machine
Crevice tool holder
Battery
On/O and brushbar control
Handle
Handheld release button
Handheld handle
Handheld On/O control
Dust separator and shroud
Dirt container
Floorhead
Brushbar
Dirt container release button
Subject to technical change without notice.
*To purchase consumables and accessories, please visit vax.co.uk
Technical Specication
Air™ Cordless Switch
H85-AC21-B
Part number 1-1-135227
Air™ Cordless Switch Pet
H85-AC21-P
Part number 1-1-136555
Battery voltage 20V
Battery Model No. BH03100UK
Charge Model No. BH03220UK
Weight 3.5kg
Dirt Container Capacity 0.7L
Air™ Cordless Switch Extra
Battery voltage 20V
Battery Model No BH03120UK
Charge Model No. BH03200UK
Weight 3.68KG
Part number 1-1-136776
Dirt Container Capacity 0.7L
Accessories & Consumables
Battery Charger* 1-1-135343
LithiumLife
TM
Battery 1-1-135310
Crevice Tool 1-1-135635
Stair Tool 1-1-135636
PLEASE READ ‘LET’S TALK SAFETY’ BEFORE USE
CAUTION: The battery used in this device may present a risk of re or chemical burn if mistreated. Do not disassemble
or heat above manufacturer’s maximum temperature limit (60°C/140°F) or incinerate. Replace battery with a Vax battery
only. Use of another battery may present a risk of re or explosion. Dispose of used battery promptly. Keep away from
children. Do not disassemble and do not dispose of in re. Do not attempt to disassemble the battery or remove any
component projecting from the battery terminals. The battery and charger have no user serviceable parts. Fire or injury
may result. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting. The battery
must be recycled or disposed of in an environmentally sound manner.
CAUTION: For best performance terminals on battery,
battery charger and vacuum cleaner must be clean
and free from dust and dirt.
NOTE: The life expectancy of the battery will vary
depending on the usage of the vacuum cleaner.
If you require a replacement battery contact us
- Vax Careline: (UK) 0330 026 8455.
Charging the battery
Fit the battery onto the battery charger. The battery charger light will turn blue when charging.
If a red light appears an error has occurred, remove the battery and re-t. The battery will be fully
charged after 10 hours (1.5 - 3 hours if using charger model No. BH03200UK)” and the charger light will turn o.
Removing the battery from charger
Press the release button on the battery, hold the base of battery charger
and lift the battery to remove.
Getting started with your LithiumLifeTM battery:
IMPORTANT: The battery will need charging before rst use. Do not attempt to charge non rechargeable batteries.
25% Charged
50% Charged
75% Charged
Getting started
TIP
The battery can remain
on the battery charger
once fully charged.
Carrying your 2-in-1 vacuum cleaner
Getting started
Line up handle with main
body and lower into place.
Insert crevice tool
into holder.
Fit the battery onto the vacuum cleaner
(below the crevice tool holder).
The battery will click into position when correctly tted.
Use handle to carry as a
upright vacuum cleaner.
Insert screw through
crevice tool holder.
Line up crevice tool holder
onto back of handle.
Line up nozzle of handheld
onto edge of lower main body.
Use handle to carry
as a handheld vacuum cleaner.
Using a crosshead screw
driver tighten screw, until
crevice tool holder and handle
are secured into place.
Push hand held into main
body until it clicks into place.
Assembling your 2-in-1 vacuum cleaner
CAUTION: Always make sure the pre-motor lter is correctly tted before using the vacuum cleaner.
As an upright vacuum cleaner
Using your machine
CAUTION: When carpet mode is selected on the On/O and brushbar control the brushbar will constantly rotate.
Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the oor surface.
Vax cannot be held responsible for damage to the oor surface if the customer fails to take notice of this recommendation.
For a more detailed clean,
line up crevice tool or stair
tool (some models only) with
the nozzle on the handheld
and push rmly into place.
Place your foot
on the base and pull
the handle back
to recline.
Press the handheld
release button.
Roll the On/O and
brushbar control forward
once for hard oor
cleaning. The brushbar
will NOT spin .
Roll the On/O
and brushbar
control forward
again for carpets.
The brushbar will spin.
Lift to remove handheld
from the main body.
Roll the On/O control forward
to switch the handheld on.
Roll the On/O control back
to switch the handheld o.
Pull to remove tool from nozzle.
Line up and return handheld
to main body.
As a handheld vacuum cleaner
CAUTION: Always take extra care when cleaning stairs.
Always switch the handheld o before connecting or disconnecting the accessories and before returning
the handheld to the main body.
Lift to remove handheld
from the main body.
Lift to remove dirt
container lid.
Press the dirt container
release button.
Taking care of your machine
Hold the battery securely and press
the release button on the top of the battery.
Lift separator tabs on either
side of dirt container.
Lift to remove separator.
Hold dirt container over
a bin allowing dirt/debris
to fall out.
Removing the battery from your vacuum cleaner
Emptying the dirt container
CAUTION: Always switch o the vacuum cleaner and remove the battery before carrying out any maintenance
or troubleshooting.
TIP
Don’t over ll the
dirt container to
avoid blocking the
air ow through the
vacuum cleaner and
replace lters every
6-9 months.
Tap separator over a bin
allowing dirt/debris
to fall out.
Ret the pre-motor lter
and separator.
Pull the lter tab
to remove the pre-motor
lter from the separator.
TA
P
Taking care of your machine
MAX
40˚C
24hr
24hr
Tap the lter over a bin
to remove any dirt/debris.
Wash the lter under running
water (40 degrees max).
Leave for 24hrs or until
fully dry before replacing.
Cleaning the separator and pre-motor lter
CAUTION: For best cleaning results lters require cleaning every 4-6 uses or as needed.
Do not use your vacuum cleaner without the lter in place.
Let’s talk technical
Clearing a blockage from the brushbar
Replacing brushbar
Using a dry cloth or soft
dusting brush remove any
dust/debris from
terminals on battery
charger, battery and
vacuum cleaner.
Remove battery and lie
the vacuum cleaner at,
exposing the brushbar.
Push the plate locks
towards each other.
Remove battery and lie
the vacuum cleaner at,
exposing the brushbar.
Push the plate locks towards
each other. Squeeze the
clips on the brushbar cover
towards the brushbar and lift
o brushbar cover.
Squeeze the clips on the
brushbar cover towards
the brushbar and lift
o brushbar cover.
Remove brushbar rstly
lifting the side of brushbar
not connected to belt.
Unloop the belt from
the brushbar and lift
to remove.
Using a pair of scissors cut any hair
or debris from around the brushbar.
Ret brushbar cover clicking clips
into place and pushing plate locks
apart to secure.
Ret replacement brushbar,
looping the belt around the brush
bar rst. Align both sides of the
brush bar and push into base.
Ret brushbar cover clicking clips
into place and pushing plate locks
apart to secure.
Cleaning terminals
CAUTION: If the brushbar has been obstructed, the Motor Protection Sensor may have been activated.
Remove the battery and dirt container and clear any obstruction from the brushbar.
Wait 30 minutes for the vacuum cleaner to reset itself.
Replace the battery and dirt container. Roll the On/O brushbar control forward to carpet mode.
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Accessories
Stair Tool
1-1-135636
Use the Stair Tool for vacuuming your stairs,
upholstery and car interiors. It’s great for picking up
stubborn pet hair.
Battery Charger
1-1-134171
This battery charger provides a charge time 6x faster
(1.5 hours) with a standard LithiumLifeTM battery*.
This battery charger charges the LithiumLifeTM Extended
Runtime Battery within 3 hours*.
* Included in Extra model.
*Faster charge time in comparison to the battery charger included with this product.
LithiumLifeTM Extended Runtime Battery
1-1-134164
LithiumLifeTM extended runtime doubles the cleaning
time to 40mins.
What to do if it goes wrong
• Check the battery is inserted correctly into the vacuum cleaner.
Go to ‘Getting started’.
• Check the handheld has been correctly tted into the main body.
Go to ‘Getting started’.
• The battery may not be charged, remove and charge battery.
• Check terminals on battery and vacuum cleaner are clean.
Go to ‘Lets talk technical’.
• Battery might be too hot, remove and allow to cool for 30 minutes.
Replace battery.
• The Motor Protection Sensor may have been activated. If this has happened,
switch o the vacuum cleaner. Remove and empty the dirt container and
check for blockages. Clean the lters and allow the vacuum cleaner to cool for
approximately 1 hour (if you have washed the lters you will need to wait 24
hours for the lters to fully dry before putting them back into the vacuum cleaner).
• Empty the dirt container and clean lters. Go to ‘Taking care of your machine’.
• There may be a blockage in the vacuum cleaner. Check the brushbar,
the nozzle of handheld, separator, shroud and tool for blockages.
• The separator has not been tted correctly. Go to ‘Taking care
of your machine’.
• The brushbar may not be turning. Go to ‘My brushbar isn’t turning?’ below.
• If the accessory/tool will not pick up, check and clear any blockages.
Go to ‘let’s talk technical’.
• The brushbar may not be switched on. Check the On/O control brush
bar roll has been turned to carpet mode. Go to ‘Using your machine’.
• The brushbar may be obstructed. Go to ‘Let’s talk technical’.
• Check the battery charger is plugged in.
• Check the battery is inserted correctly into the charger.
• Check terminals on battery and vacuum cleaner are clean.
Go to ‘Lets talk technical’.
• The battery may not be connecting with the charger. Remove battery
and unplug charger, wait 10 seconds then retry.
• The battery is fully charged and the charger light has turned o.
• The battery has not been fully charged. Go to ‘Getting started’.
• Check the battery is inserted correctly into the charger.
• The battery or charger has an error. Remove the battery and unplug charger,
wait 10 seconds then plug charger into the mains and re-insert the battery.
• Check terminals on battery and vacuum cleaner are clean.
Go to ‘Lets talk technical’.
Why does my
vacuum cleaner
have no power?
Why won’t the
vacuum cleaner
pick up?
My brushbar
isn’t turning?
Why isn’t the
battery charger
light lit when
the battery
is charging?
Why does my
battery have
a short run time?
Why is the battery
charger light
continually ashing?
SolutionProblem
CAUTION: To reduce the risk of personal injury, remove the battery before performing maintenance
/troubleshooting checks.
Getting in touch
†
Registration required. Terms and conditions apply.
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.
GET IN TOUCH
0330 026 8455 VaxVacuumsinfo@vax.co.uk vax.co.uk @VaxUK
EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the
H85-AC21-B/P/BB is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive.
EMC: 2004/108/EC Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice.
© 2015 All rights reserved. VAX®, VAX Lozenge LithiumLife™ and Air™ Cordless, are trade marks or registered trade marks of
Techtronic Floor Care Technology Ltd.
Loading...