www.vax.co.uk
Please read carefully before using this cleaner.
Always fully extend the mains cable before use.
R
e
tain f
or future reference.
Vax careline
0870 6061248
instruction manual
Bagless cylinder
Vax model number:
V-111
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 1
V-111
1. Diagram
www.vax.co.uk
2
parts overview
1
8
79
2
3 4
5
6
Fig.1/2
Fig.1/1
1 Carry handle
2 On/off button / Variable power dial
3 Dirt container locking button
4 Dirt container handle
5 Floor tool parking slot
6 Auto cord rewind
7 Wheel
8 Post-motor filter
9 Dirt container full indicator
10 Telescopic tube
11 Combination floor head
12 Dusting brush
13 Crevice tool
14 Upholstery tool
15 Flexible hose
11
12
10
13 14
15
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 2
3
Vax Careline 0870 606 1248
safety information
2. Safety Information
For Household Use Only
When using the vacuum cleaner, basic safety precautions
should always be observed, including the following:
1. Only use the vacuum cleaner indoors on dry
surfaces.
2. Turn off the vacuum cleaner controls before
connecting or disconnecting from the mains supply.
3. Always unplug the vacuum cleaner before
connecting or disconnecting the vacuum hose and
accessories.
4. Children should be supervised to ensure that they
do not play with the appliance.
5. The appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
6. Use only as described in this manual.
Use only the manufacturer’s recommended
attachments.
7. Do not use the vacuum cleaner if it has been
dropped, damaged, left outdoors or dropped into
water. Do not use the vacuum cleaner with a
damaged cord or plug. If the supply cord or plug is
damaged, return the vacuum cleaner to a Vax
Authorised Service Agent or suitably qualified
person for examination, repair or adjustment.
8. Do not pull or carry by the cord. Do not use the cord
as a handle, close a door on the cord or pull the cord
around sharp edges or corners. Do not run the
vacuum cleaner over the cord. Keep the cord away
from heated surfaces.
9. Do not handle the plug or vacuum cleaner with wet
hands. Do not use outdoors or on wet surfaces.
10. Do not put any objects into openings. Do not use
with any openings blocked and do not restrict air
flo
w. K
eep all openings fr
ee of dust, lint, hair or
anything that may reduce airflow.
11. Keep hair, loose clothing, fingers and all parts of the
body away from openings and moving parts.
12. Do not pick up hot coals, cigarette butts, matches or
any hot, smoking or burning objects.
13. Do not pick up flammable or combustible materials
(lighter fluid, petrol, kerosene, etc) or use in the
presence of explosive liquids or vapours.
14. Do not vacuum up harmful or toxic material (chlorine
bleach, ammonia, drain cleaner, etc).
1
5. Do not vacuum up hard or sharp objects such as
glass, nails, screws, coins, etc.
16. Do not use without the filters in place.
17. Take extra care when vacuuming stairs.
18. Keep vacuuming area well lit.
19. Store the vacuum cleaner indoors in a cool, dry area.
20. Turn off the on/off switch before unplugging the
vacuum cleaner.
21. Use only CE-approved 13 amp extension cords.
Non-approved extension cords may overheat. Care
should be taken to arrange the cord so that the cord
cannot be pulled or tripped over.
WARNING: Always switch off and unplug the
vacuum cleaner from the electrical outlet
before assembling, opening or emptying the dirt
container, or before connecting/disconnecting the
attachments.
CAUTION: The vacuum cleaner is a very
powerful unit. Before plugging the cord into
the electrical outlet, make sure the switch is in the
‘off’ position.
IMPORTANT: If the inlet, hose or telescopic
tube is blocked, switch off the vacuum cleaner
and remove the blockage(s) before re-starting the
vacuum cleaner.
IMPORTANT: Cleaning filters improves vacuum
performance. Make sure all the filters are
completely dry before inserting back into the vacuum
cleaner.
This vacuum cleaner is intended for household use only
and not for commercial or industrial use.
!!!
!
Motor Thermostat
IMPORTANT: The motor is equipped with a thermal
cut-out. If for any reason, the vacuum cleaner should
o
v
er-hea
t, the thermostat will automatically turn the
unit o
ff. Should this occur, unplug the vacuum cleaner
from the electrical outlet and turn off the switch.
Remove the dirt container and empty. Clean the
filters. Allow the cleaner to cool for approximately one
(1) hour. To re-start, plug into an electrical outlet and
switch back on.
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 3
www.vax.co.uk
4
assembly / operation
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
1. Insert the flexible hose into the inlet on the main body
of the vacuum cleaner. Push in until it clicks into
position (Fig.3/1).
2. Push the telescopic extension tube on to the end of
the handle (Fig.3/2).
3. The telescopic extension tube can be lengthened or
shortened by pushing the button in and sliding the
tube apart or together as required (Fig.3/3).
4.
Fit the combination floor head by pushing onto the
e
xtension tube (Fig.3/4).
4. How to Operate
Cord Release
Fully unwind the power cord. A yellow mark on the power
cord indicates the recommended cord length. Do not
exceed the cord length beyond the red mark.
On/Off Button
Insert the power plug into the electrical outlet. Ensure the
vacuum cleaner is switched off.
Press the on/off button located on the top of the vacuum
cleaner and press the button again to turn the vacuum
cleaner off.
Carpet Cleaning
For carpet and rug cleaning press the rocker switch on the
combination floor head to raise the brushes.
Hard floor cleaning
For hard floor cleaning, press the rocker switch on the
combination floor head to lower the brushes.
Cord Rewind
To rewind the power cord, press the cord rewind button,
located at the rear of the vacuum cleaner, and guide the
power cord with one hand. This will prevent the cord from
whipping which could cause damage or injury.
Variable Power
Located on the top of the machine and incorporated in the
on/off button is the variable power dial. Rotate the dial
clockwise to increase the power and anti-clockwise to
reduce.
Carry Handle
Use the carry handle located in front of the on/off button
to move the vacuum cleaner from room to room.
Hose Storage
For convenience there is a slot located located on the rear
of the vacuum cleaner where the floor tool and hose can
be parked for carrying and storage.
Dirt Container Full Indicator
The indicator is located on the top of the machine. When
illuminated, the dirt container must be emptied.
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/4
!
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 4
5
Vax Careline 0870 606 1248
accessories / dirt container &filter
5. Accessories
The accessories can be attached directly to the handle by
removing the telescopic tube and pushing in the desired
accessory.
The accessories can also be attached to the telescopic
tube for extra reach. Remove the combination floor head
and push on the desired accessory.
Dusting brush: for delicate surfaces.
Upholstery tool: for carpets, upholstery, stairs, etc.
Crevice Tool: for crevices, corners and cracks, etc.
6. Dirt Container: Removal
and Replacement
WARNING: Always unplug the vacuum cleaner
from the electrical outlet before removing the
dirt container.
W
ARNING: Do NOT use the vacuum cleaner
without ALL of the filters and dirt container in
place.
NOTE: For best performance, replace filters annually.
Emptying the Dirt Container
NOTE: The dirt container must be emptied every time
the dirt reaches the max line.
After removing the flexible hose, press the dirt containerlocking button on the top of the machine (Fig.6/1)
Remove the dirt container from the unit and position over
a rubbish bin and press the dirt container release button
(Fig.6/2)
When all the dirt has fallen the dirt container may be wiped
with a damp cloth to clean. Allow to air dry completely
be
f
or
e closing the dirt c
on
tainer bo
tt
om and r
eplace back
in the unit until a click is heard.
Fig.6/1
Fig.6/2
!
!
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 5
www.vax.co.uk
6
dirt container &filter / storage
7. Cleaning the Pre- and
Post-motor filters
NOTE: The pre-motor filter and post-motor filter
should be cleaned at least twice a year or when they
become discoloured. Vax reccomends frequently
cleaning the filters to optimize the performance of
the vacuum cleaner.
NOTE: Do not use any detergents or boiling water to
wash the filters.
Cleaning the pre-motor filter
Remove the dirt container as previously directed.
Remove the filters as shown (Fig.7/1).
The pre-motor and foam filter may be rinsed in luke warm
water max (40°C). Allow to air dry for at least 24 hours
before replacing (Fig. 7/2).
Return the pre-motor and foam filter to the unit before
r
eplacing the dirt c
on
tainer
.
Cleaning the post-motor filters
NOTE: These are located on both sides of the vacuum
cleaner
.
Release the post-motor cover catch by pressing in the
catch at the bottom of the cover (Fig.7/3).
The post-motor filter can be removed from the unit then
may be rinsed in luke warm water max (40°C). Allow to
air dry for at least 24 hours before replacing (Fig.7/4).
Replace the post-motor filters back in the vacuum
cleaner.
8. Storage
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet and rewind the power
cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
Fig.7/1
Fig.7/3
Fig.7/2
Fig.7/4
!
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 6
7
Vax Careline 0870 606 1248
troubleshooting / uk service & help / technical specification
9. Troubleshooting
WARNING: To reduce the risk of personal injury,
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Vacuum cleaner won't run
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in securely.
Cause: No electricity in the electrical outlet.
Solution: Check fuse or breaker.
Cause: On/off switch not turned on.
Solution: Push on/off switch to ‘on’.
Cause: Motor thermostat has tripped.
Solution: Switch off and unplug the vacuum cleaner.
Leave for one (1) hour before switching the
vacuum cleaner back on.
Cause: Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won’t pick up/loss of suction.
Cause:
Dirt container not installed properly.
Solution: Review dirt container replacement.
Cause: Dirt container full or blocked.
Solution: Empty dirt container.
Cause: Clogged filters.
Solution: Remove, clean and replace filters.
PROBLEM: Accessories won’t pick up.
Cause:
Accessories are not attached correctly.
Solution: Refer to section 5.
Cause: Hose is not installed correctly.
Solution: Refer to section 7.
PROBLEM: Dust escaping from the vacuum cleaner.
Cause:
Dirt container full.
Solution: Emp
ty dirt c
ontainer.
Cause: Dirt container not installed correctly.
Solution: Review dirt container replacement.
Cause: Hose is not installed correctly.
Solution: Review installation.
Cause: Filter no
t ins
talled completely.
Solution: Remove, clean and replace filters.
10. UK Service & Help
Vax Care 0870 6061248
Monday-Friday 9.00am to 5.00pm.
An answerphone is available outside of these hours. Any
queries or concerns about using the Vax, call the Vax
Careline. Calls are charged at the UK national rate.
Please make a note of the serial number and model
number of the carpet cleaner before calling. There are
over 400 approved Vax Service Agents in the UK. For the
nearest Service Agent, please call the Vax Careline.
www.vax.co.uk
11. Technical Specification
Voltage: 220-240V ~50Hz
Wattage: 2000W
Capacity: 2 litres
Filters: Pre-motor filter - washable
Post-motor filter - washable
Dirt container - wipeable
Cord length: 6.5m
Weight: 7.0kg approx
Subject to technical change without notice.
!
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 7
---
EEC STATEMENT OF COMPLIANCE
Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that
the V-111 G:3 is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive
EMC: 89/336/EEC Electromagnetic Compatibility Directive
W
aste electrical products should not be disposed of with household waste. Please recycle where
facilities e
xist. Check with your Local Authority or retailer for recycling advice.
Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 OQH, UK
email: info@vax.co.uk - website: www.vax.co.uk
Vax V-111 User Guide.qxd 14/6/07 16:15 Page 8
Loading...