Vax Essentials VEW-01 Instruction Manual

www.vax.co.uk
Please read carefully before using this cleaner.
Always fully extend the mains cable before use.
R
e
tain f
or future reference.
0870 6061248
instruction manual
Carpet washer
Vax model number:
VEW-01
Vax VEW-01 Essentials User Guide.qxd 4/10/07 11:15 Page 1
VEW-01
1. Diagram
www.vax.co.uk
2
parts overview
4
3
9
2
1
14
12
1
3
15
1
0
11
1 Water pump button (green) 2 Power button (red) 3 Carry handle 4 Power cord 5
C
ontainer release clips 6 Casters 7 Hose connection port 8
Solution tube port
9 Exhaust filter
10 Hose 11 Solution tube
12 Hose connector
13 Solution tube to machine connector
14
Solution tube t
o wash head/upholstery tool connector 15 Telescopic tube 16 Fireflow carpet wash head 17
Uphols
t
ery wash t
ool
18 Vax AAAcarpet cleaner
AAA
ANTI
ALLERGEN
ADDITIVE
5
6
7
8
16
17
Fig.1/1
18
Vax VEW-01 Essentials User Guide.qxd 4/10/07 11:15 Page 2
3
Vax Careline 0870 606 1248
safety information
2. Safety Information
FOR HOUSEHOLD USE ONLY.
When using the vacuum cleaner, basic safety precautions should always be observed, including the following:
1. Do not leave the carpet washer unattended when plugged in. Unplug it from socket when not in use.
2. To prevent electric shock do not use outdoors.
3. Not to be used as a toy. Children should be supervised to ensure that they do not play with the appliance.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
5. Use only as described in this manual.
6. Do not use with a damaged cord or plug. If the supply cord and/or plug is damaged, they must be replaced by the manufacturer, a Vax Service Agent or similarly qualified persons in order to avoid hazard.
7. Do not pull or carry by the cord, use the cord as a handle, allow the cord to come into contact with hot or sharp surfaces or close a door on the cord.
8. Do not unplug by pulling on the cord.
9. Do not handle the plug or carpet washer with wet hands.
10. Do not put any objects into openings or operate with openings blocked, keep them free of anything that may reduce airflow.
11. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
12. Do not use the carpet washer on any glowing, burning or smoking particles.
13. Do not use without the solution tank and dirty water tank in place.
14. Do not use the vacuum without the dust bag in place.
15.
Turn off all controls before unplugging.
16. Do not use to pick up flammable or combustible liquids such as petrol, or use in areas where they may be present.
17. Keep the unit on the floor.
18.
Do no
t use an e
xt
ension cord.
19. Do not attempt to remove blockages with sharp objects as they may cause damage.
20. Store indoors put awa
y a
ft
er use t
o prevent tripping
accidents.
21. Using improper voltage may result in damage to the motor and possible injury to the user. The correct voltage is listed on the rating label.
22. A hazard may occur if the carpet washer runs over the power supply cord.
23. To prevent dirty water from running into motor, do not hold the appliance upside-down or lay on its side. Use appliance in normal vacuuming position.
24. Use extra care when cleaning on stairs.
25. Do not carry appliance while motor is running.
NOTE: Carpets should be dry vacuumed thoroughly before washing.
NOTE: The unit must be unplugged from the mains socket outlet after use, and before cleaning or maintaining the unit.
IMPORTANT: This unit is not intended for commercial use.
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER USE.
!
Vax VEW-01 Essentials User Guide.qxd 4/10/07 11:15 Page 3
www.vax.co.uk
4
preparing the carpet / getting ready to wash
3. Preparing the Carpet
IMPORTANT: Do not use the cleaner as a dry vacuum.
1. Vacuum carpet thoroughly. Use a vacuum cleaner with a revolving brushbar for best results.
2. Remove as much furniture from the room as possible. If unable to remove the furniture, place plastic or foil under and around the legs until the carpet has dried completely.
Helpful hints for cleaning carpet:
1. Only use Vax recommended carpet cleaner with this carpet washer.
2. Do not oversaturate carpet with cleaning solution while using the carpet washer.
3. For heavily soiled areas, additional applications may be necessary.
4. Allow plenty of time to dry carpet thoroughly.
5. Wipe cleaning solution from woodwork and wood to prevent any damage.
6. Try not to walk on carpet until it is completely dry.
7. After carpet is thoroughly dry, vacuum the carpet using a vacuum cleaner with a revolving brushbar.
8. Before cleaning, determine where to start and end, making sure not to walk over previously cleaned areas.
Check for colour fastness
Before cleaning carpet, test for colour fastness. Dampen a white cloth with solution. Test on a small inconspicuous area prior to washing. Gently rub the cloth over the area. Check each colour for colour bleeding. If the cloth remains clean, it should be safe to clean the carpet.
After cleaning
• Allow carpet to dry completely. Try not to walk on the
carpet until it is dry.
• If it is necessary to walk on the carpet, place white
towels on the areas to be walked on.
If the carpet is not dry and the furniture must be placed back in the room, use plastic or foil under the furniture to pr
e
v
en
t staining the carpet.
• Thoroughly clean the dirty water tank with warm
(max 40ºC) tap water.
4. Getting Ready to Wash
1. Unclip Container ReleaseClips (A) on both sides of machine (Fig.4/1).
2. Lift off Motor Container to reveal Clean Water Tank (A) situated inside Dirty Water Tank (B) (Fig.4/2).
3. Remove Clean Water Tank (A) from inside the Dirty Water Tank and fill with warm (max 40°C) water to point indicated on the tank. Add 1 capful of Vax AAA solution per litre of water (unless otherwise stated on the bottle) (Fig 4/3).
4. Replace Clean Water Tank (A)inside Dirty Water Tank (B) taking car
e t
o ensur
e tha
t the space to allow the dirty water back into the tank is lined up with the Solution Port (C) (Fig.4/4).
!
Fig.4/1
A
Fig.4/2
A
B
Fig.4/3
A
Vax VEW-01 Essentials User Guide.qxd 4/10/07 11:15 Page 4
Loading...
+ 8 hidden pages