Energise Pulse
Let’s get started
vax.co.uk
U85-E2-Be/U85-E2-Pe
Project: Energise Pulse UG
Project: Energise Pulse UG
Upload date:
Job No: Model No: U85-E2-BePeRe
Model No: U85-E2-BePeRe
Proof No: 2 Designer: Pete PM: Sarina Size (HxW): A5
Size (HxW): A5
Barcode No.: NA Part No.:
Senior Designer/SM:
Designer/Artworker:
Marketing:
NPD:
Sign o date:
Colours used: CMYK
No. of pages
Vax logo correct size
Brand style consistent
CMYK & Spots used correctly
Icons consistent (if used)
Correct photography used
All links are high resolution
Cutterguide correct
Spell check completed
Kerning check
No double spaces
No widows
Artwork packaged/Hi-res PDF
Low-res PDF created
Mock up produced (if required)
Not
used
In
Progress
Final
Artwork
16
X
X
X
X
X
X
X
X
X
X
NA
X
X
X
FOR STUDIO
FOR SIGN OFF
FOR PRINTER
C
M Y K
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 1 12/09/2014 14:23
Let’s talk safety Let’s talk safety
3 Turn o all controls on the vacuum cleaner before disconnecting or
connecting the plug from the mains socket.
3 Always keep the power cord away from the brushes during use.
After use always wrap the power cord around the cord
clips provided.
3 Always make sure both the pre-motor/post-motor lters are
in place before use.
3 Always ensure the brushbar is switched o when using the
vacuum cleaner on the stairs and take extra care when positioning
the vacuum cleaner on the stairs.
3 Always switch o the vacuum cleaner before disconnecting or connecting the
hose and accessories.
3 Keep all openings clear and free from debris as this may aect the airow/suction.
3 Always replace the fuse in the plug with a British 13amp fuse. Always protect the
power cable from heated surfaces and open ames.
3 Use only CE approved 13amp extension cords, non-approved extension cords may
overheat. Care should be taken to arrange the extension cord as it can be
a trip hazard.
3 Store the vacuum cleaner in a cool, dry area. If lters have been cleaned as per
the user guide instructions ensure they are thoroughly dry before storing away.
Do’s
Please keep instructions for further use and use only as instructed
in this guide.
This vacuum cleaner is intended for household use only and NOT
for commercial or industrial use.
• Only use the vacuum cleaner indoors on dry surfaces and keep
the area you’re cleaning well lit.
• Keep ngers, hair and loose clothing away from moving parts and
openings whilst using the vacuum cleaner.
• This vacuum cleaner can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the vacuum cleaner in a safe way and understand the hazards
involved. Children shall not play with the vacuum cleaner. Cleaning and user
maintenance shall not be made by children without supervision.
• Only Vax recommend tools should be used with this vacuum cleaner, use of
non-branded Vax accessories/tools will invalidate your warranty.
Basic
safety
precautions
8 Don’t use this vacuum cleaner if it has been dropped,
damaged or left outdoors.
8 Don’t run over the power cord or use vacuum cleaner if the power
cord or plug is damaged. Please contact our customer care line on:
0330 026 8455 (Mon-Fri 8:30am-6:30pm, Sat 9:00am-5:00pm).
8 Don’t handle the plug or use the vacuum cleaner with wet hands.
8 Don’t pull or carry this vacuum cleaner by the power cord.
8 Don’t use the power cord as a handle, pull the power cord around
corners, sharp edges or close a door over the power cord.
8 Don’t vacuum up any ammable or combustible materials (lighter
uid, petrol, kerosene etc.) or use the vacuum cleaner in an area
with explosive vapours or liquid.
8 Don’t unplug vacuum cleaner by pulling on the power cord.
8 Don’t vacuum up any ammable or combustible materials (lighter uid, petrol,
kerosene etc.) or use the vacuum cleaner in an area with explosive vapours or
liquid.
8 Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning
items or use in an area where there may be harmful uids (chlorine, bleach, and
ammonia drain cleaner).
8 Don’t attempt to remove blockages with sharp objects as this may cause damage
to the vacuum cleaner. Remove blockages only as instructed in this guide.
8 Don’t vacuum up hard or sharp objects such as glass, nails, screws or coins etc.
8 Don’t use the vacuum cleaner with incorrect voltage as this may result in damage
or injury to the user. The correct voltage is listed on the ratings label.
Don’ts
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 2-3 12/09/2014 14:23
Thank you for buying this Energise Pulse.
Taking care of your carpets and hard oors
The Energise Pulse is designed to make vacuuming carpets and hard oors regularly, as
eective and ecient as possible and this user guide will help you get the most out of
your machine.
Maintaining your carpets and hard oors will ensure they keep their appearance for longer.
You’ve chosen the carpets and hard oors for your home for a reason and Vax will help you take
good care of them.
Taking care of your Energise Pulse
Also inside this guide are instructions on maintaining your new machine, so that it’s always
ready when you are to tackle your carpets and hard oors.
Contents
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
What to do if it goes wrong
Getting in touch
Accessories
Energise Pulse
(Included in all models)
3-in-1 tool (crevice, dust
and upholstery tool)
Included with
your machine
Pre-motor lter
Post-motor lter
TurboTool
Hard oor adaptor
Tool connector
Initial Setup for normal operation
1. Use the base accessories.
– Shortest hose
– Extension tub e set to shortest practicable lengt h.
2. Clean lters installe d.
3. Dust receptacle empt y.
4. All Bleeds m ust be closed.
5. Floor hea ds/tools set to C arpet Mode for carpet cleaning.
6. Mechanical Agitation turn ed ON for carpet c leaning.
7. Floor heads/tools set to Hard Flo or Mode for hard o or cleaning.
8. Mechanic al Agitation turned OFF for hard oor c leaning.
Let us know what you think @VaxUK
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich,
Worcestershire, WR9 0LW, UK
This user guide can be found online at: vax.co.uk/support
Energise Pulse Pet
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 4-5 12/09/2014 14:23
Assembling your upright
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Insert the back panel into
the oorhead.
Insert the lower quick release
cord hook into the hole at the
bottom of the back panel.
Now take the small clip and
push it down between the
post-motor lter cover and
back panel, over the quick
release cord hook to lock
into place.
Insert the short end of the
hose into the tube at the back
of the machine and connect
the hose end to the oorhead.
Attach hose clip to the
air inlet tube.
Place the dirt container onto
the machine and push until it
clicks into place.
Insert the extension tube into
the handle.
Push handle into the top of
the machine until it clicks
into place.
Plug in and switch on
your machine.
Push TurboTool holder on to
the handle.
Clip TurboTool into position.
Handle
TurboTool holder (hidden)
Post-motor lter cover
Hose to
machine
connector
Floor type
adjustor
Handle release button
Separator
Dirt container
Hose holder
Dirt container
release button
Extension tube
Power
On/O button
Hose
Power cord
Quick release
cord hook
Getting to know your machine
Technical Specication
Name Energise Pulse
Voltage Please refer to product rating label
Wattage Please refer to product rating label
Cord length 8m
Weight 7kg
Accessories & Consumables
Filter Kit (Type 98)*
1-1-134233-00
Belt Kit (Type 1)*
1-1-130669-01
TurboTool (Type 6)*
1-1-134173-00
Subject to technical change without notice.
*To purchase consumables and accessories, please visit vax.co.uk
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 6-7 12/09/2014 14:23
Using your machine Using your machine
Extension tube
Remove extension tube
from inside the handle.
Turn the extension tube and
attach to the handle.
Using accessories
Remove hose end from
the oorhead.
Attach hose to the top of
the handle.
Push accessory on to the
extension tube.
Choose an accessory. Attach accessory adapter to
hose end.
If required use
tool connector.
Hold the machine to steady
when using on the stairs.
Always make sure the
brushbar is overhanging the
stair tread during use.
Using your machine on the stairs
This machine has a constantly
rotating brushbar. When using the
machine on stairs, ensure the height
adjuster dial is set to hard oor and
the brushbar is overhanging the
stair tread (as pictured). Always take
extra care when cleaning stairs.
CAUTION
Twist the quick release
cord hook to release the
power cord.
How to use
Before you begin cleaning
• Always switch o and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and
emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o and unplug from electrical
socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool
for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters to fully dry before putting back into
the vacuum).
• Filters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the o position.
IMPORTANT: When the vacuum cleaner is stood in the upright position or when using on stairs and the hose/tools, the
brushbar height adjust dial must be set to hard oor.
Choose your desired carpet
height or hard oor setting.
Plug in your machine and
push On/O button to
switch on.
Don’t over ll the dirt
container to avoid clogging
your lter.
TIP
To ensure the Hard Floor Adaptor
is correctly tted, the wheels
should be towards the back of
the oor tool when attached to
vacuum cleaner.
Lie vacuum cleaner on its
back exposing brushbar.
Align Hard Floor Adaptor
with base of vacuum
cleaner, push until its clicks
into place.
Using the Hard Floor Adaptor
Apply the Hard Floor Adaptor for optimum results on hard oors.
The Hard Floor Adaptor can be used on any oor setting.
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 8-9 12/09/2014 14:24
Removing debris from the brushbar
Taking care of your machine Taking care of your machine
Cleaning the shroud
Turn the dirt container
lid anti-clockwise and lift
to remove.
24hr
MAX
40˚C
Remove the pre-motor lter
to allow access to
the shroud.
Tap the shroud over a bin to
remove dirt and debris.
Wash the shroud under
running water and leave to
fully dry before placing back
into the machine.
Post-motor lter maintenance
Twist post-motor lter
cover anti-clockwise and lift
to remove.
Remove the lter. Check the post-motor lter
for discolouration.
Emptying and cleaning the dirt container
Press dirt container
release button to remove
the dirt container.
Hold dirt container over
a bin and unclip the lock
on the bottom of the dirt
container, allowing the dirt
to fall out.
Close the base of the dirt container, align the
dirt container base back onto the machine
and push until it clicks back into place.
Cleaning the pre-motor lter
Turn the dirt container
lid anti-clockwise
to remove.
Lift the dirt container lid
to remove.
TIP
Wash lters with warm water
(MAX 40°C) at least every 3 months.
Tap the lter over a bin to
remove the dirt.
MAX
40˚C
24hr
Wash the lter under
running water (40°C max).
Leave to fully dry for at
least 24 hours before
placing back in
the machine.
Tap the lter over a bin to
release and dirt.
Always switch the machine o
and unplug before carrying out
any maintenance.
CAUTION
Switch o your vacuum cleaner at the main socket.
Using a pair of scissors cut any hair or debris free
from around the brushbar.
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 10-11 12/09/2014 14:24
Changing the belt
Switch o your vacuum
cleaner at the main socket
and unplug. Unclip the 2
small wheels from the base
of the vacuum to enable you
to remove the screws from
behind. Note: The screw for
the height adjuster dial is
located here.
Remove the 9 screws
from the base of the
oorhead cover.
Remove the oorhead cover.
Lift the brushbar from the
machine to remove the belt.
Note: To remove debris
from the brushbar see
‘Lets talk technical’ on the
previous page.
Place the brushbar through
the belt and hook the belt
onto the metal spindle.
Once the belt has been
replaced attach the
brushbar back onto the
vacuum.
Replace the oorhead
cover, 2 small wheels and
height adjuster dial by
screwing back into place.
What to do if it goes wrong
• Check the ‘This pack contains’ panel on the box to make sure the part
is included with your machine.
• There may be a blockage in the hose. Please remove the hose from the
vacuum cleaner, check and clear any blockages.
• Empty the dirt container and clean lters.
Go to the ‘Taking care of your machine’.
• The brushbar may not be turning. Go to my brushbar isn’t turning below.
• If the accessory/tool will not pick up, check and clear any blockages.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with
a British 13amp fuse.
• The motor thermostat may have tripped. If this has happened, unplug
the vacuum cleaner. Remove and empty the dirt container and check
the hose for blockages.
• Clean the lters and allow the vacuum cleaner to cool for
approximately 1 hour (if you have washed the lters you will need to
wait 24 hours for the lters to fully dry before putting them back into
the vacuum cleaner).
• The brushbar may be clogged, check the brushbar and clear any hair
or debris. Go to ‘Let’s talk technical’.
• The belt may be broken. Go to ‘Let’s talk technical’.
SolutionProblem
IMPORTANT: To reduce the risk of personal injury, unplug the vacuum before performing maintenance
/troubleshooting checks.
There is an
accessory missing
Why does my
vacuum cleaner
have no power?
Why won’t the vacuum
cleaner pick up?
My brushbar
isn’t turning?
Let’s talk technical
Removing blockages from the TurboTool
Push both buttons to open the TurboTool.
Using a pair of scissors, cut
any hair or debris free from
around the brushes.
Remove the rubber ring.
If the air inlet, hose or telescopic
tube is blocked, switch o the
vacuum cleaner and remove the
blockage(s) before re-starting the
vacuum cleaner.
CAUTION
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 12-13 12/09/2014 14:24
Getting in touch Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
TurboTool (Type 6)
1-1-134419
Use the TurboTool for vacuuming your stairs,
upholstery and car interiors. It’s great for picking up
stubborn pet hair.
3-in-1 Tool
1-1-129167-00
3-in-1 tool includes crevice tool for awkward areas
and corner, dusting brush for areas such as skirting
and an upholstery tool for cleaning sofas, curtains,
chair seats and car interiors.
Flexi-crevice Tool
1-1-131393-00
A handy long, exible tool for getting far behind and
around furniture.
Fur ‘n’ Flu Tool
1-1-131392-00
Specically designed to remove extra stubborn pet
hair from upholstery, furniture and carpets.
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 14-15 12/09/2014 14:24
EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility,
declare that the U85-E2-(Be/Pe) is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
© 2014 All rights reserved. VAX®, VAX Lozenge, <add extra trademark/delete as needed> are trade marks or registered trade marks of Techtronic Floor Care
Technology Ltd.
@VaxUK
Vax Ltd., 5th Floor 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN, UK
email: info@vax.co.uk website: vax.co.uk
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 16 12/09/2014 14:24
Loading...