User Guide
ZOOM
Performance is everything.
vax.co.uk
C87-ZM-B/ C87-ZM-P/ C87-ZM-R/ C87-ZM-PF
Designed in the UK
Contents
1
2
3
4
5
6
7
8
9
Contents
Machine Overview
General Safety Information
Getting Started
Looking After Your Machine — Filters
Looking After Your Machine — Filters
FAQs
Other Information
Guarantee
vax.co.uk
1
9
8
Machine Overview
Dirt container handle
Dirt container lid
Power on/o button
Main body
Dirt container
Hose connector
Base
Cord rewind button (hidden)
Dirt container release button
Variable power dial
Wheel outer
Wheel inner
Inner separator
Outer cyclone
Dirt container release latch
Upholstery tool
Crevice tool
Dusting brush
Turbo Tool
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
NOTE: Some parts may vary according to model. Please check inside ap of box for more details.
2vax.co.uk
5
1
2
6
18
11
3
4
10
15
12
16
17
14
13
7
19
General Safety Information
This vacuum cleaner is intended for household use only and NOT for commercial or industrial use.
Please keep instructions for further use. When using the vacuum cleaner, basic safety precautions should always be observed,
including the following:
1. Do not leave the vacuum cleaner unattended when plugged in. Unplug the appliance from the socket when not in use.
2. Only use the vacuum cleaner indoors on dry surfaces.
3. Turn o the on/o switch on the vacuum cleaner controls before disconnecting or connecting from the mains supply.
4. Always unplug the vacuum cleaner before connecting or disconnecting the vacuum hose and accessories.
5. Children should be supervised to ensure that they do not play with the appliance.
6. This appliance is not intended for use by children under eight years of age and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance in a safe way and understands the hazards involved.
7. Cleaning and maintenance shall not be made by children without supervision.
8. The appliance should only be used as described in the quick start guide or in the full online user guide.
9. Only Vax recommended attachments should be used with this appliance.
10. Do not use this vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into water. Do not use
this vacuum cleaner with a damaged cord or plug. If the supply cord is damaged return the vacuum cleaner to a
Vax authorised Service Agent or a suitably qualied person for examination, repair or adjustment.
11. Do not pull or carry this appliance by the cord. Do not use the cord as a handle, close a door on the cord or pull
the cord around sharp edges or corners. Do not run the vacuum cleaner over the cord. Keep the cord away from
heated surfaces.
12. Do not handle the plug or the vacuum cleaner with wet hands.
13. Keep hair, loose clothing, ngers and all parts of the body away from openings and moving parts.
14. Do not pick up any hot coals, cigarette butts, matches or any hot, smoking or burning objects.
15. Do not pick up any ammable or combustible materials (lighter uid, petrol, kerosene etc.) or use in the presence
of explosive liquids or vapours.
16. Do not vacuum up harmful or toxic material (chlorine, bleach, ammonia, drain cleaner etc.)
17. Do not vacuum up hard or sharp objects such as glass, nails, screws, coins etc.
18. Store the vacuum cleaner in a cool, dry area.
19. Use only CE approved 13 amp extension cords. Non-approved cords may overheat. Care should be taken to arrange
the cord so that the cord cannot be tripped over.
20. Do not put any objects into openings. Do not use with any openings blocked and do not restrict airow.
Keep all openings free of dust, lint, hair or anything that might reduce airow.
21. Do not use without all of the lters in place.
22. Take extra care when vacuuming on the stairs.
23. Please ensure that the brushbar is turned o when you are vacuuming on the stairs.
24. Keep vacuuming area well lit.
vax.co.uk
3
Getting Started
Insert the end of the hose
into the unit. Ensure the
hose has clicked into place.
Slot the metal telescopic
extension tube and hose handle
together. All accessories can
be tted to the end of the metal
telescopic extension tube and
hose handle.
PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Assembling your cylinder
Fully unwind the power
cord. A yellow mark on the
cord indicates the
recommended cord length.
Do not exceed the cord
beyond the yellow mark.
Before plugging the cord into the electrical socket, make sure the switch is in the ‘o’ position.
Plug in and switch the
unit on by pressing the
power button.
How to use
Adjust the power by rotating
the dial for dierent surfaces
as required.
Hard Floors
Carpets
For use on carpets click rocker
switch forward. For use on hard
oors click rocker switch back.
Packing away and storage
Cable rewind button is located
at the rear of the machine.
After unplugging press the
cable rewind until the cord is
fully retracted.
For convenience there is a parking slot located at the rear of
the vacuum cleaner where the oor head and tubes can be
attached for storage and carrying.
4vax.co.uk
vax.co.uk
5
Looking After Your Machine – Filters
Emptying and cleaning the dirt container
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Hold the dirt container over a bin and press the dirt release latch
(located at the rear of the dirt container).
Tap excess dirt from the lter. Rinse under a tap and leave to dry for 24 hours.
1
2
3
Hold the dirt container and
twist the lid anti-clockwise.
Lift the lid to reveal the
pre-motor lter.
Lift out the pre-motor lter.
T
A
P
4
MAX
40˚C
5
24hr
6
Cleaning the pre-motor lter
IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch o the vacuum cleaner and remove the
blockage(s) before re-starting the vacuum cleaner.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat
will automatically turn the unit o. Should this occur, unplug the vacuum cleaner from the electrical socket and turn o
the switch. Remove and empty the dirt container. Check the hose for blockages. Clean the lters. Allow the unit to cool
for approximately one hour (if you have cleaned the lters you will need to wait twenty four hours for the lters to dry
before putting them back in the machine). To re-start the machine, plug it into an electrical socket and switch it back on.
6vax.co.uk
Looking After Your Machine – Filters
1
2
3
Hold the dirt container and twist
the lid anti-clockwise.
Hold the container and twist the
inner separator anti-clockwise.
Lift the lid to reveal the
pre-motor lter.
Remove the inner separator
from the container.
Lift out the pre-motor lter.
Dislodge any excess dirt by gently
tapping the inner separator over
a container.
4
5
T
A
P
6
Cleaning the shroud
1
Unlock
1
2
2
T
A
P
3
Tabs
3
Post motor lter is located in the
left side wheel. Hold the centre of
the wheel and twist wheel cover
anti-clockwise.
With the wheel cover o
the post-motor lter is
easily removed.
Tap all excess dirt o the lter.
Do not wash.
Cleaning the HEPA post-motor lter
Removing blockages from the TurboTool
FAQs
vax.co.uk
7
Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks.
Is there an accessory missing?
• Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is denitely included in
your unit.
• If it is missing, we’re here to help. Simply call us on 0844 412 8455
Why won’t the vacuum cleaner pick up?
• The lters may need cleaning, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p5-6)
• The separator may be clogged, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p5-6)
• There may be a blockage in the hose, please check the hose and remove the blockage
• The dirt container may be full or blocked, please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’ page of
this user guide (p5)
• The dirt container may be incorrectly installed, please ensure the dirt container is locked in place
Why won’t the accessories pick up properly?
• The TurboTool may be blocked, please refer to the ‘Looking After Your Machine – Removing Blockages’ page in this user guide (p6)
• The accessory may be broken
What do I do if an accessory/the unit becomes damaged or broken?
• Please check if the damage is with the accessory or the unit. To do this, rstly remove the accessory from the unit and check if there
is suction from the hose. If there is suction from the hose this conrms that the damage is with the accessory. Please visit ‘spares shop
website’ – vax.co.uk/support
• If having done the above checks, checked the hose for blockages and cleaned the lters there is still no suction/limited suction from the
hose, please call our Vax Careline 0844 412 8455
Why is dust escaping from the vacuum?
• The lters may not be installed correctly, please refer to the ‘Looking After Your Machine – Filters’ page of the user guide (p5-6)
• The dirt container may be full or blocked, please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’
page of this user guide (p5)
• The lters may need cleaning, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p5-6)
• There may be a blockage in the hose, please check the hose and remove the blockage
Why does my vacuum cleaner have no power?
• It may not be plugged into the electrical socket correctly. Ensure that the plug is pushed into the electrical socket securely
• The electrical socket may not be working. Check the fuse or breaker and consult an electrician
• The motor thermostat may have tripped. Switch o and unplug the vacuum cleaner. Check the unit for blockages, clean the lters – please
refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6) and clean the separator – please refer to the ‘Looking After
Your Machine – Emptying and cleaning dirt container’ page of this user guide (p5). Leave the vacuum cleaner for 24 hours before switching
the vacuum cleaner back on
Why does the vacuum cleaner cut out?
• The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit o.
Should this occur, unplug the vacuum cleaner from the electrical socket and turn o the switch. Remove and empty the dirt container.
Check the hose for blockages. Clean the lters. Allow the unit to cool for approximately 1 hour (if you have cleaned the lters you will need
to wait 24 hours for the lters to dry before putting them back in the machine)
What do I do if the unit becomes damaged or broken?
• We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk
UK Service & Help
Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the
Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model
number of the vacuum cleaner before calling.
Vax Careline:
(UK) 0844 412 8455
(ROI) 1-800 928 308
Monday-Friday 8.30am to 6.30pm
Saturday-Sunday 9.00am to 5.00pm
Consumables
To purchase spares and accessories, please visit vax.co.uk
The use of genuine vax spare parts helps to maintain optimised
performance and validates your guarantee
Filter Kit (Type 65): 1-1-132164-00
Upholstery tool (Type 3): 1-1-132116-00
Crevice tool (Type 9): 1-3-128633-00
Dusting Brush (Type 5): 1-9-127512-00
Technical Specication
Voltage: 220-240V -50Hz
Filters: Pre-motor lter (washable)
H12 HEPA (anti-bacterial) Post-motor lter (dependant on model)
Subject to technical change without notice.
EEC Statement of Compliance
Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the
C87-ZM series is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive
EMC: 2004/108/EC Electromagnetic Compatibility Directive
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Other Information
8vax.co.uk
Machine Overview
FREE 2 year guarantee
Instead of taking me back to the shop, simply visit:
vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308
Let us know what you think @VaxUK
we’re here if you need us
UK based customer care centre — Open 7 days a week
Monday-Friday 8:30am-18:30pm
Saturday and Sunday 9:00am-17:00pm
Please retain your original receipt for proof of purchase.
It’s quick and easy to register for your
online at: vax.co.uk/guarantees
Designed in the UK
vax.co.uk
9
Guarantee
vax.co.uk
vax.co.uk
Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK
email: info@vax.co.uk website: vax.co.uk
Performance is everything.
vax.co.uk
Loading...