DynamoPower
DYNAMIC POWERFUL
PERFORMANCE
LET’S GET STARTED.
C85-Z1-Be
Let’s talk safety
Basic
safety
precautions
Don’ts
This vacuum cleaner is intended for household use only
and NOT for commercial or industrial use.
• Only use the vacuum cleaner indoors on dry surfaces
and keep the area you’re cleaning well lit.
• Keep ngers, hair and loose clothing from moving parts
and openings whilst using the vacuum cleaner.
• This vacuum cleaner can be used by children aged from
8 years and above and persons with reduced physical,
• Don’t use this vacuum cleaner if it has been dropped, damaged
or left outdoors.
• Don’t run over the power cord or use vacuum cleaner if the
power cord or plug is damaged. Please contact our Customer
Service Line on: 0330 026 8455 (Mon-Fri 8:30am to 6:30pm,
Sat 9:00am to 5:00pm).
• Don’t handle the plug or use the vacuum cleaner with wet hands.
• Don’t pull or carry this vacuum cleaner by the power cord.
• Don’t use the power cord as a handle, pull the power cord around
corners, sharp edges or close a door over the power cord.
• Don’t unplug vacuum cleaner by pulling on the power cord.
Do’s
• Turn o all controls on the vacuum cleaner before
disconnecting or connecting the power cord.
• Always make sure both the pre-motor/post-motor lters are
in place before use.
• Always switch o the vacuum cleaner before disconnecting
or connecting the hose and accessories.
• Keep all openings clear and free from debris as this may aect
the airow/suction.
• Always replace the fuse in the plug with a British 13amp fuse.
• Always protect the power cable from heated surfaces and
open ames.
sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the vacuum
cleaner in a safe way and understand the hazards involved. Children shall
not play with the vacuum cleaner. Cleaning and user maintenance shall not
be made by children without supervision.
• Only Vax recommended tools and accessories should be used with this
vacuum cleaner.
• Don’t vacuum up any ammable or combustible materials (lighter uid, petrol,
kerosene etc.) or use the vacuum cleaner in an area with explosive vapours
or liquid.
• Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning
items or use in an area where there may be harmful uids (chlorine, bleach,
and ammonia drain cleaner).
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to your vacuum cleaner.
• Don’t vacuum up hard or sharp objects such as glass, nails, screws or coins etc.
• Don’t use the vacuum cleaner with incorrect voltage as this may result in
damage or injury to the user. The correct voltage is listed on the ratings label.
• Take extra care when positioning and using the vacuum cleaner on the stairs.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it can
be a trip hazard.
• Store your vacuum cleaner in a cool, dry area. If lters have been cleaned
as per user guide instructions ensure they are thoroughly dry before
storing away.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.
Thank you for buying this Dynamo Power.
Taking care of your carpets and hard oors
The Dynamo Power is designed to make vacuuming carpets and hard oors regularly, as eective
and ecient as possible and this user guide will help you get the most out of your machine.
Maintaining your carpets and hard oors will ensure they keep their appearance for longer.
You’ve chosen carpets and hard oors for your home for a reason and Vax will help you take
good care of them.
Taking care of your Dynamo Power
Also inside this guide are instructions on maintaining your new machine, so that it’s always ready
when you are to tackle your carpets and hard oors.
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich,
Worcestershire, WR9 0LW, UK
This user guide can be found online at: vax.co.uk/support
Let us know what you think @VaxUK
Contents
Dynamo Power
(Included with all models)
Included with
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
Accessories
What to do if it goes wrong
your machine
Combination Floorhead
Telescopic
Extension Tube
3-in-1 Tool
Accessory Hose
Getting in touch
Initial Setup for normal operation
1. Use the base accessories.
a. Shortest hose.
b. Extension tube set to shortest practicable length.
2. Clean lters installed.
3. Dust receptacle empty.
4. All Bleeds must be closed.
5. Floorheads/tools set to Carpet Mode for carpet cleaning.
6. Mechanical Agitation turned ON for carpet cleaning.
7. Floorheads/tools set to Hard Floor Mode for hard oor cleaning.
8. Mechanical Agitation turned OFF for hard oor cleaning.
Getting to know your machine
Separator
Hose entry point
Dirt container release button
Dirt bin lid release clip
Dirt container
Carry handle
Power On/O button
Post-motor lter cover
Technical Specication
Name Dynamo Power
Voltage See rating label on machine for details
Wattage See rating label on machine for details
Cord length 6m
Weight 4.5kg
Subject to technical change without notice.
Cord rewind button
Post-motor lter
cover release clip
Accessories & Consumables
TurboTool (Type 6)
1-1-134419-00
Tool connector (Type 1)
1-1-133838-00
*To purchase consumables and accessories, please visit vax.co.uk
Combination oorhead tool (Type 5)
1-1-134341-00
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you begin cleaning
• Always switch o and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters
to fully dry before putting back into the vacuum machine).
• Clean the pre-motor lter every time the dirt container is emptied and replace the post-motor lter every 12 months.
• If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.
Assembling your vacuum cleaner
Press both buttons at the end
of the hose and push hose
into the hose entry point.
Fully unwind the power
cord. A yellow mark on
the cord indicates the
recommended cord length.
Do not exceed the cord
beyond the yellow mark.
Insert the hose grip into the
telescopic extension tube.
Plug into mains and press
the On/O button to
switch the machine on.
Press the button on the
telescopic extension
tube and adjust to
required length.
Insert the other end of
the telescopic extension
tube into the oorhead.
When unwinding the
power cord always pull
out to the yellow marker
but no further.
CAUTION
Using your machine
CAUTION: The base of the vacuum cleaner should always be positioned at on the oor when starting and in use.
The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.
How to use
For use on carpets, click
rocker switch forward.
For use on hard oors
click rocker switch back.
Slide vent cover on hose
grip open to reduce
suction if required.
Raise brushes for carpets.
Lower brushes
for hard oors.
Using accessories
Choose an accessory. Push accessory onto
the telescopic extension
tube or hose.
Storage
CAUTION: Make sure to hold the cord with your other hand to prevent injury when rewinding.
Press the cord rewind
button to retract the cord
into the vacuum cleaner.
Place the oorhead into the parking
slot on the back of the vacuum
cleaner for storage and carrying.
Taking care of your machine
24hr
24hr
24hr
IMPORTANT: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Pre-motor lter needs to be cleaned every time you empty the dirt container. Do not use your vacuum cleaner
without all of the lters in place.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit o.
Emptying and cleaning the dirt container
Don’t over ll the
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Hold dirt container over a bin.
Pull the dirt release clip at the
bottom of the container, the
dirt release door will open
allowing dirt/debris to fall out.
dirt container to
avoid blocking the
air ow through the
vacuum cleaner.
TIP
Cleaning the pre-motor lter and sponge
Lift the dirt bin lid release
clip. In a hinge like manner
lift dirt bin lid.
!
40˚C
40˚C
MAX
MAX
Separate the sponge and lter
and rinse under water
(Max 40°C).
Lift the pre-motor lter and
sponge to remove from the
dirt container.
A
T
Tap the pre-motor lter and
sponge against a bin to remove
any dirt/debris.
Leave to dry for 24 hours or until fully
dry before placing back in the machine.
P
Taking care of your machine
T
AP
Cleaning the separator
CAUTION: Incorrect tting of the separator cap will reduce suction.
Lift the dirt bin lid release
clip. In a hinge like
manner lift dirt bin lid.
Twist grips clockwise
and remove cap
from separator.
Retting the separator
Lift the pre-motor lter and
sponge to remove from the
dirt container.
Tap the separator against
a bin to remove any dirt
or debris.
Using central grips lift
to remove separator
from dirt container.
For any stubborn dirt/
debris remaining in
the separator, use a
soft brush to remove.
TIP
Replace the separator cap,
twist clockwise to lock.
IMPORTANT: Incorrect tting of the separator will reduce suction.
Replace separator into dirt container, make sure
the rectangular hole in the dirt container lines
up with the rectangular hole on the separator.
Let’s talk technical
Post-motor lter maintenance
IMPORTANT: The post-motor lter is designed to oer long life with no maintenance. The lter should be
checked periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush
the lter as this will damage the lter.
Push the post-motor lter cover
release clip to the right to remove
the post motor lter cover.
Pull the post motor lter
to the left and remove the
post motor lter.
Removing blockages from the hose
Remove the hose from the vacuum cleaner and telescopic
extension tube. Insert a broom handle or similar blunt
instrument into the hose to remove blockage.
Check the post motor lter for discolouration.
Do not wash the post motor lter.
To test for a blockage in
the hose, drop a small
ball of paper into the
hose. The paper will
drop through if the
hose is clear.
TIP
Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Pro Cleaning Kit (Type 2)
1-1-133326-00
All our best tools all in one kit that makes cleaning
your home quicker, easier and with even better
results. We’ve taken care of cleaning all of the hard
to reach areas such as on top of cupboards and in
between blinds to the dust that collates behind and
within the radiator.
TurboTool (Type 6)
1-1-134419-00
Use the TurboTool for vacuuming your stairs,
upholstery and car interiors. It’s great for picking
up stubborn pet hair.
Fur ‘n’ Flu Tool
1-1-131392-00
Specically designed to remove extra stubborn
pet hair from upholstery, furniture and carpets.
What to do if it goes wrong
There is an
accessory missing
Why won’t the vacuum
cleaner pick up?
SolutionProblem
• Check the ‘This pack contains’ panel on the box to make sure the part
is included with your vacuum cleaner.
• The dirt container may not be correctly tted, remove the dirt container from
the vacuum cleaner and check it’s assembled correctly, ret ensuring it’s locked
into place.
• The separator is blocked. Go to ‘Taking care of your machine’.
• The separator is incorrectly tted. Go to ‘Taking care of your machine’.
• The lter may be clogged, clean the lter. Go to ‘Taking care of your machine’.
• The dirt container may be blocked, empty the dirt container. Go to ‘Taking care
of your machine’.
• There may be a blockage in the hose/tube. Disconnect from the vacuum cleaner
and carefully remove any blockages. Go to ‘Let’s talk technical’.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with
Why does my vacuum
cleaner have no power?
a British 13amp fuse.
• The motor thermostat may have tripped. If this has happened, unplug the
vacuum cleaner. Remove and empty the dirt container and check the hose
for blockages. Clean the lters and allow the vacuum cleaner to cool for
approximately 1 hour (if you have washed the lters you will need to wait
24 hours for the lters to fully dry before putting them back into the
vacuum cleaner).
• The lters may be clogged, clean the lter. Go to ‘Taking care of your machine’.
Why is dust escaping
from the vacuum?
IMPORTANT: To reduce the risk of personal injury, unplug the vacuum before performing maintenance/
troubleshooting checks.
Getting in touch
†
†
Registration required. Terms and conditions apply, see vax.co.uk for details.
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.
GET IN TOUCH
0330 026 8455 VaxVacuumsinfo@vax.co.uk vax.co.uk @Vax UK
EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the
C85-Z1-Be manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive.
EMC: 2004/108/EC Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice.
© 2015 All rights reserved. VAX®, VAX Lozenge, are trade marks or registered trade marks of Techtronic Floor Care
Technology Ltd.
Loading...