Vauxhall Vivaro 2013 User Manual

Owner’s Manual
Model Year 2013
Edition: November 2012
TS 1693-A-13

0 - 1Owner’s Manual Model Year 2013 Edition: November 2012 TS 1693-A-13

VAUXHALL Vivaro

Contents

Introduction .................................... 2

In brief ............................................ 6

Keys, doors and windows ............ 18

Seats, restraints ........................... 32

Storage ........................................ 53

Instruments and controls ............. 58

Lighting ........................................ 77

Climate control ............................. 82

Driving and operating ................... 91

Vehicle care ............................... 112

Service and maintenance .......... 143

Technical data ........................... 146

Customer information ................ 159

Index .......................................... 162

2 Introduction

Introduction

Introduction 3

Vehicle specific data

Please enter your vehicle's data on
the previous page to keep it easily
accessible. This information is
available under the sections "Service
and maintenance" and "Technical
data" as well as on the identification
plate.

Introduction

Your vehicle is a designed
combination of advanced technology,
safety, environmental friendliness
and economy.

This Owner's Manual provides you
with all the necessary information to
enable you to drive your vehicle
safely and efficiently.

Make sure your passengers are
aware of the possible risk of accident
and injury which may result from
improper use of the vehicle.

You must always comply with the
specific laws and regulations of the
country that you are in. These laws
may differ from the information in this
Owner's Manual.

When this Owner's Manual refers to a
workshop visit, we recommend your
Vauxhall Authorised Repairer.

All Vauxhall Authorised Repairers
provide first-class service at
reasonable prices. Experienced
mechanics trained by Vauxhall work
according to specific Vauxhall
instructions.

The customer literature pack should
always be kept ready to hand in the
vehicle.

Using this manual

■ This manual describes all options
and features available for this
model. Certain descriptions,
including those for display and
menu functions, may not apply to
your vehicle due to model variant,
country specifications, special
equipment or accessories.

■ The "In brief" section will give you
an initial overview.

■ The table of contents at the
beginning of this manual and within
each section shows where the
information is located.

■ The index will enable you to search
for specific information.

■ This Owner's Manual depicts left­hand drive vehicles. Operation is
similar for right-hand drive vehicles.

■ The Owner's Manual uses the
factory engine designations. The
corresponding sales designations
can be found in the section
"Technical data".

■ Directional data, e.g. left or right, or
front or back, always relate to the
direction of travel.

■ The vehicle display screens may
not support your specific language.

■ Display messages and interior
labelling are written in bold letters.

Danger, Warnings and
Cautions

9 Danger

Text marked 9 Danger provides
information on risk of fatal injury.
Disregarding this information may
endanger life.

4 Introduction

9 Warning

Text marked 9 Warning provides
information on risk of accident or
injury. Disregarding this
information may lead to injury.

Caution

Text marked Caution provides
information on possible damage to
the vehicle. Disregarding this
information may lead to vehicle
damage.

Symbols

Page references are indicated with 3.
3 means "see page".

Thank you for choosing a Vauxhall.
We wish you many hours of

pleasurable driving.
Your Vauxhall Team

Introduction 5

6 In brief

In brief

Initial drive information

Vehicle unlocking

Unlocking with key

Turn the key in the driver's door lock.
Open the doors by pulling the
handles.

Unlocking with remote control

Press button c (or press and hold) to
unlock vehicle.

Radio remote control 3 18, Central
locking system 3 20, Load
compartment 3 25.

In brief 7

Seat adjustment

Seat positioning

Pull handle, slide seat, release
handle.

Seat position 3 33, Seat adjustment
3 34.

9 Danger

Do not sit nearer than 25 cm from
the steering wheel, to permit safe
airbag deployment.

Seat backrests

Pull lever, adjust inclination and
release lever. Allow the seat to
engage. Do not lean on backrest
when adjusting.

Seat position 3 33, Seat adjustment
3 34.

Seat height

Lift lever and adjust body weight on
seat to raise or lower it.

Seat position 3 33, Seat adjustment
3 34.

8 In brief

Head restraint adjustment

Raise or lower head restraint to the
desired height.

Head restraints 3 32.

Seat belt

Pull out the seat belt and engage in
belt buckle. The seat belt must not be
twisted and must fit close against the
body. The backrest must not be tilted
back too far (maximum approx. 25°).

To release belt, press red button on
belt buckle.

Seat position 3 33, Seat belts
3 39, Airbag system 3 42.

Mirror adjustment

Interior mirror

To reduce dazzle, adjust the lever on
the underside of the mirror housing.

Interior mirror 3 29.

In brief 9

Exterior mirrors

Manual adjustment

Swivel mirror in required direction.
Exterior mirrors 3 28.

Electric adjustment

Select the relevant exterior mirror and
adjust it.

Convex exterior mirrors 3 28,
Electric adjustment 3 28, Folding
exterior mirrors 3 28, Heated
exterior mirrors 3 29.

Steering wheel adjustment

Unlock the lever, adjust the steering
wheel, then engage the lever and
ensure it is fully locked.

Do not adjust the steering wheel
unless vehicle is stationary and the
steering wheel lock has been
released.

Airbag system 3 42, Ignition
positions 3 92.

10 In brief

Instrument panel overview

In brief 11

1 Ashtray .................................. 63

Cupholders ........................... 53

Fuse box ............................. 126

2 Fixed air vents ....................... 89

3 Side air vents ........................ 88

4 Light switch .......................... 77

Rear fog light ......................... 80

Front fog lights ..................... 79

Exit lighting ............................ 81

Turn and lane-change

signals ................................... 79

Sidelights .............................. 77

Headlight flash, low beam

and high beam ...................... 78

5 Instruments .......................... 63

Driver Information Centre ..... 72

Transmission display ............ 66

6 Horn ...................................... 59

Driver airbag ......................... 43

7 Steering column controls ...... 59

8 Windscreen wiper,

windscreen washer system ..59

Rear window wiper, rear

window washer system ........ 60

Trip computer ....................... 74

9 Centre air vents ..................... 88

10 Triple-Info-Display ................. 72

11 Tachograph ........................... 76

12 Front passenger airbag ......... 43

13 Storage tray ......................... 53

14 Coin tray ............................... 53

15 Storage tray ......................... 53

16 Glovebox .............................. 53

17 Utility hook ........................... 10

18 Climate control system .......... 82

19 Hazard warning flashers ....... 79

20 Central locking system .......... 20

Heated exterior mirrors ......... 29

Heated rear window .............. 31

Manual transmission
automated,

Winter and Laden modes ...... 97

Cruise control and speed

limiter ................................. 102

21 Gear lever, Manual

transmission .......................... 94

Manual transmission

automated ............................. 95

22 Power outlet .......................... 62

Cigarette lighter ..................... 62

23 Ignition switch with

steering wheel lock ............... 92

24 Steering wheel adjustment ...58
25 Remote control on

steering wheel ...................... 58

Cruise control ..................... 102

26 Ultrasonic parking assist .... 105

Headlight range

adjustment ........................... 78

Electronic Stability

Program ............................. 101

Traction Control system ...... 100

12 In brief

27 Auxiliary heater ..................... 85

28 Bonnet release lever ........... 113

Exterior lighting

Turn light switch

= Off

7

= Sidelights

0

= Headlights

9P

= Front fog lights

>

= Front and rear fog lights

>r

Lighting 3 77, Automatic light
control 3 77, Headlight warning
device 3 73.

Front and rear fog lights

Turn light switch

= Front fog lights

>

= Front and rear fog lights

>r

In brief 13

Headlight flash, high beam and low beam

Pull lever.
High beam 3 78, Headlight flash

3 78.

Turn and lane-change signals

lever up = right turn signal
lever down = left turn signal

Turn and lane-change signals
3 79.

Hazard warning flashers

Operated with the ¨ button.
Hazard warning flashers 3 79.

14 In brief

Horn

Press j.

Washer and wiper systems

Windscreen wiper

K

= timed interval wiping
1 = slow
2 = fast

Windscreen wiper 3 59, Wiper
blade replacement 3 120.

Windscreen and headlight washer systems

Pull lever.
short

pull
long
pull

Windscreen and headlight washer
system 3 59, Wiper blade
replacement 3 120, Washer fluid
3 117.

= wiper swipes once

= wiper swipes for a few

strokes and washer fluid is
sprayed onto the
windscreen

In brief 15

Rear window wiper and washer system

Turn lever.
0 = off

e

= wiper

f

= washer

Rear window wiper and washer
system 3 60, Wiper blade
replacement 3 120, Washer fluid
3 117.

Climate control

Heated rear window, heated exterior mirrors

Heating is operated by pressing the
Ü button.

Heated exterior mirrors 3 29,
Heated rear window 3 31.

Demisting and defrosting the windows

Air distribution to V.
Set temperature control to warmest

level.
Set fan speed to highest level.
Cooling AC on.
Heated rear window Ü on.
Climate control system 3 82.

16 In brief

Transmission

Manual transmission

Reverse: with the vehicle stationary,
wait 3 seconds after depressing
clutch pedal and then pull up the
collar on the selector lever and
engage the gear.

If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.

Manual transmission 3 94.

Manual transmission automated

N = neutral

= drive

o

+ = higher gear

- = lower gear
A/M = switch between automatic

and manual mode

R = reverse gear

Manual transmission automated
3 95.

Starting off

Check before starting off

■ Tyre pressure and condition 3 128,
3 157.

■ Engine oil level and fluid levels
3 114.

■ All windows, mirrors, exterior
lighting and number plates are free
from dirt, snow and ice and are
operational.

■ Proper position of mirrors, seats
and seat belts 3 28, 3 33,
3 40.

■ Brake function at low speed,
particularly if the brakes are wet.

In brief 17

Starting the engine

■ Turn key to position A

■ move the steering wheel slightly to
release the steering wheel lock

■ operate clutch and brake

■ do not operate accelerator pedal

■ diesel engines: turn the key to
position M for preheating and wait
until control indicator !
extinguishes in the Driver
Information Centre.

■ turn key to position D and release.

Starting the engine 3 92.

Parking

■ Always apply parking brake without
pushing the release button. Apply
as firmly as possible on a downhill
or uphill slope. Depress foot brake
at the same time to reduce
operating force.

■ Switch off the engine. Turn the
ignition key to position St and
remove it. Turn the steering wheel
until the steering wheel lock is felt
to engage.

■ If the vehicle is on a level surface or
uphill slope, engage first gear
before switching off the ignition. On
an uphill slope, turn the front
wheels away from the kerb.

If the vehicle is on a downhill slope,
engage reverse gear before
switching off the ignition. Turn the
front wheels towards the kerb.

■ Lock the vehicle and activate the
anti-theft alarm system 3 26 with
button e on the remote control.

■ Do not park the vehicle on an easily
ignitable surface. The high
temperature of the exhaust system
could ignite the surface.

■ Close the windows.

■ The engine cooling fans may run
after the engine has been switched
off 3 113.

■ After running at high engine speeds
or with high engine loads, operate
the engine briefly at a low load or
run in neutral for approx.
30 seconds before switching off, in
order to protect the turbocharger.

Keys, locks 3 18.
Laying the vehicle up for a long period

of time 3 112.

18 Keys, doors and windows

Keys, doors and windows

Keys, locks ................................... 18

Doors ........................................... 24

Vehicle security ............................ 25

Exterior mirrors ............................ 28

Interior mirrors ............................. 29

Windows ...................................... 29

Keys, locks

Keys

Replacement keys

The key number is specified on the
key or on a detachable tag.

The key number must be quoted
when ordering replacement keys as it
is a component of the immobiliser
system.

Locks 3 139.

Lock cylinders

Designed to free-wheel if they are
forcefully rotated without the correct
key or if the correct key is not fully
inserted. To reset, turn cylinder with
the correct key until its slot is vertical,
remove key and then re-insert it. If the
cylinder still free-wheels, turn the key
through 180° and repeat operation.

Car Pass

The Car Pass contains security
related vehicle data and should
therefore be kept in a safe place.

When the vehicle is taken to a
workshop, this vehicle data is needed
in order to perform certain operations.

Radio remote control

Used to operate:

■ Central locking system

■ Anti-theft locking system

■ Anti-theft alarm system
Depending on model, the vehicle may

use a 2 button or 3 button remote
control.

Keys, doors and windows 19

The remote control has a range of
approx. 5 metres. It can be restricted
by external influences. The hazard
warning flashers confirm operation.

Handle with care, protect it from
moisture and high temperatures and
avoid unnecessary operation.

Fault

If the central locking system cannot
be operated with the remote control,
it may be due to the following:

■ Range exceeded

■ Battery voltage too low

■ Frequent, repeated operation of the
remote control while not in range,
which will require reprogramming
by a workshop

■ Interference from higher-power
radio waves from other sources

Unlocking 3 20.

Remote control battery replacement

Replace the battery as soon as the
range reduces.

Batteries do not belong in household
waste. They must be disposed of at
an appropriate recycling collection
point.

2-button remote control

Open battery compartment by
inserting a coin into the slot and
twisting.

Replace the battery (battery type
CR 2016), paying attention to the
installation position.

Reattach both halves of the cover,
ensuring they engage correctly.

3-button remote control

Remove screw and open battery
compartment by inserting a coin into
the slot and twisting.

Replace the battery (battery type
CR 2016), paying attention to the
installation position.

Reattach both halves of the cover,
ensuring they engage correctly.

20 Keys, doors and windows

Replace screw and tighten.

Central locking system

Unlocks and locks the front doors,
sliding side doors, load compartment
and fuel filler flap.

With the 3-button remote control, the
front doors and sliding side doors/
load compartment can be unlocked
and locked separately.

For safety reasons, the vehicle
cannot be locked if the key is in the
ignition switch.

Unlocking the vehicle

Unlocking with key
Turn key in driver's door lock towards
the front of the vehicle.

Unlocking with 2-button remote control

Depending on vehicle configuration:

■

Press button c: All doors and the
load compartment are unlocked.

■

Press button c once to unlock the
front doors, and press c twice to
unlock all doors and the load
compartment.

Unlocking with 3-button remote control

Depending on vehicle configuration:

■

Press button c: Front doors are
unlocked. Press and hold button c:
All doors and the load compartment
are unlocked.

Keys, doors and windows 21

■

Press button c: Front doors and
sliding side doors are unlocked.
Press and hold button c: All doors
and the load compartment are
unlocked.

■

Press button c: Driver's door only is
unlocked. Press and hold c: All
doors and the load compartment
are unlocked.

If no door is opened within approx.
30 seconds after the vehicle has been
unlocked, the vehicle is re-locked
automatically.

Locking the vehicle

Close doors, load compartment and
fuel filler flap. If the doors are not
closed properly, the central locking
system will not work.

Locking with key
Turn key in driver's door lock towards
the rear of the vehicle.

Locking with 2-button remote control

Depending on vehicle configuration:

■

Press button e briefly: All doors and
the load compartment are locked.

■

Press button e once to lock the front
doors, and press e twice to lock all
doors and the load compartment.

Locking with 3-button remote control

Press button e briefly: All doors and
the load compartment are locked.

Note
Where fitted, alarm monitoring of the
passenger compartment 3 26 is
switched off by pressing and holding
button e (which is confirmed by an
audible signal).

If this was done unintentionally,
unlock the doors again and press
button e briefly to lock the vehicle.

22 Keys, doors and windows

Load compartment

Locking and unlocking load compartment with 2-button remote control

Depending on vehicle configuration:

■

Press button e or c once: Load
compartment is locked or unlocked.

■

Press button e or c twice: Load
compartment is locked or unlocked.

Locking and unlocking load compartment with 3-button remote control

Depending on vehicle configuration:

■ Press button G: Load

compartment is locked or unlocked.

■ Press button G: Load

compartment and sliding side doors
are locked or unlocked.

Central locking switch

Locks or unlocks the doors, load
compartment and fuel filler flap from
the passenger compartment.

Press switch:

= lock

e

= unlock

y

Slam door locks

Certain models feature load
compartment locks which are isolated
for added security.

With slam door locks, while the doors
can be locked and unlocked using the
remote control, the load compartment
must be manually opened by turning
the key in the lock.

Keys, doors and windows 23

Automatic locking

Automatic locking after driving off

This security feature can be
configured to automatically lock the
doors, load compartment and fuel
filler flap as soon as the vehicle is
driven.

Activation
With the ignition switched on, press
and hold e on the central locking
switch for approx. 5 seconds. An
audible signal confirms activation.

Deactivation
With the ignition switched on, press
and hold y on the central locking
switch for approx. 5 seconds. An
audible signal confirms deactivation.

Child locks

9 Warning

Use the child locks whenever
children are occupying the rear
seats.

The child safety lock for the sliding
door is located on its rearward facing
edge.

Using a key or suitable screwdriver,
turn the child lock in the rear door to
the horizontal position. The door

cannot be opened from the inside. For
deactivation, turn the child lock to the
vertical position.

24 Keys, doors and windows

Doors

Sliding door

Ensure the side door is fully closed
and secure before driving the vehicle.

The door can be locked from inside
the vehicle with the interior lock
switch.

Rear doors

To open the left hand rear door pull
the outside handle. The door is
opened from inside the vehicle by
pulling the interior handle.

The right hand rear door is released
using the lever.

9 Warning

The rear lights may be obscured if
the rear doors are open and the
vehicle is parked on the roadside.

Make other road users aware of
the vehicle, by using a warning
triangle or other equipment
specified in the road traffic
regulations.

The doors are retained in the 90º
position by locking stays. To open the
doors to 180º or further, pull the door
release handles and swing open to
the desired position.

9 Warning

Ensure extended opening doors
are secured when fully opened.

Opened doors may slam closed
due to the force of the wind!

Always close the right hand door
before the left hand door.

Keys, doors and windows 25

Load compartment

Tailgate

Opening

After unlocking with the remote
control, press tailgate button and lift
tailgate to the fully open position.

The tailgate can be also opened from
inside the vehicle by pushing down
the tailgate interior release.

Note
In very cold climates, the opening
assistance provided by the tailgate
hydraulic struts may be reduced.

Central locking system 3 20.

Closing
Close tailgate using the interior strap.
Ensure tailgate is fully closed.

Central locking system 3 20.

General hints for operating tailgate

9 Warning

Do not drive with the tailgate open
or ajar, e.g. when transporting
bulky objects, since toxic exhaust
gases, could enter the vehicle.

Caution

Ensure there is adequate
clearance both above (at least

2.15 m) and behind when opening
tailgate.

Vehicle security

Anti-theft locking system

9 Warning

Do not use the system if there are
people in the vehicle! The doors
cannot be unlocked from the
inside.

The system deadlocks all doors and
the tailgate.

All doors and the tailgate must be
closed or the system cannot be
activated.

Note
The anti-theft locking system cannot
be activated when the hazard
warning lights or sidelights are
switched on.

Activation and deactivation are not
possible with the central locking
switch.

26 Keys, doors and windows

Activation

Press button e twice.

- or ­Turn key in driver's door lock towards

rear of vehicle twice.

Deactivation

Unlock the doors with the key or
button c on the remote control.

Anti-theft alarm system

The anti-theft alarm system is
operated in conjunction with the
central locking system.

It monitors:

■ Doors, tailgate, bonnet

■ Passenger compartment,

■ Load compartment,

■ Vehicle inclination, e.g. if it is raised

■ Ignition

■ Interruption of alarm siren power
supply.

Activation

All doors and the bonnet must be
closed.

Press button e to activate anti-theft
alarm system. Hazard warning lights
flash twice to confirm activation.

If the hazard warning lights do not
flash upon activation, a door or the
bonnet is not fully closed.

Deactivation

Unlocking the vehicle or switching on
the ignition deactivates the anti-theft
alarm system. Hazard warning lights
flash once to confirm deactivation.

Note
If the alarm has been triggered,
unlocking the vehicle with the key
will not stop the alarm siren. To stop
the siren, switch on the ignition. The
hazard warning lights will not flash
upon deactivation if the alarm has
been triggered.

Activation without monitoring of passenger compartment

Disable monitoring of the passenger
compartment e.g. when animals are
being left in the vehicle, or if the
auxiliary heater 3 85 has been set
for a timed or remote controlled start.

Keys, doors and windows 27

Press and hold button e; an audible
signal will sound as confirmation.

The status will remain until the doors
are unlocked.

Alarm

When triggered, the alarm sounds via
a separate battery-backed power
sounder, and the hazard warning
lights flash simultaneously. The
number and duration of alarm signals
are stipulated by legislation.

If the vehicle battery is disconnected
or its power supply is interrupted, the
alarm siren will be triggered. First

deactivate the anti-theft alarm system
if the vehicle battery must be
disconnected.

To silence the alarm siren (if
triggered) and therefore deactivate
the anti-theft alarm system, reconnect
vehicle battery and unlock vehicle
with remote control button c (or
switch on the ignition).

Immobiliser

The system is part of the ignition
switch and checks whether the
vehicle is allowed to be started with
the key being used.

The immobiliser is activated
automatically after the key has been
removed from the ignition switch and
also if the key is left in the ignition
switch when the engine is turned off.

If the engine cannot be started, switch
off the ignition and remove key, wait
approx. 2 seconds and then repeat
the start attempt. If start attempt is
unsuccessful, attempt to start the
engine using the spare key and seek
the assistance of a workshop.

Note
The immobiliser does not lock the
doors. You should always lock the
vehicle after leaving it and switch on
the anti-theft alarm system 3 20,
3 26.

28 Keys, doors and windows

Exterior mirrors

Convex shape

The convex exterior mirror contains
an aspherical area and reduces blind
spots. The shape of the mirror makes
objects appear smaller, which will
affect the ability to estimate
distances.

Manual adjustment

Adjust mirrors by swivelling in
required direction.

The lower mirrors are not adjustable.

Electric adjustment

Select the relevant exterior mirror by
switching the control to the left or
right, then swivel the control to adjust
the mirror.

No mirror is selected when the control
is in the centre position.

The lower mirrors are not adjustable.

Folding

For pedestrian safety, the exterior
mirrors will swing out of their normal
mounting position if they are struck
with sufficient force. Reposition the
mirror by applying slight pressure to
the mirror housing.

Keys, doors and windows 29

Heated

Operated by pressing the Ü button.
Heating functions with the engine

running. It is switched off
automatically after a short time.

Climate control system 3 82.

Interior mirrors

Manual anti-dazzle

To reduce dazzle, adjust the lever on
the underside of the mirror housing.

Windows

Windscreen

Heat-reflecting windscreen

The heat-reflecting windscreen has a
coating which reflects solar radiation.
Also data signals, e.g. from toll
stations, might be reflected.

The marked areas on the windscreen
are not covered with the coating.
Devices for electronic data recording
and fee payment must be attached in
these areas. Otherwise data
recording malfunctions may occur.

30 Keys, doors and windows

Windscreen stickers

Do not attach stickers such as toll
road stickers or similar on the
windscreen in the area of the interior
mirror.

Manual windows

The door windows can be opened or
closed with the window winders.

Power windows

9 Warning

Take care when operating the
power windows. Risk of injury,
particularly to children.

Keep a close watch on the
windows when closing them.
Ensure that nothing becomes
trapped in them as they move.

Power windows can be operated with
the ignition on.

Operate the switch for the respective
window by pushing to open or pulling
to close.

For vehicles with automatic feature
pull or press the switch again to stop
window movement.

In the event of closing difficulties due
to frost or the like, operate the switch
several times to close the window in
stages.

Rear windows

Sliding side windows

To open, pull up catch and slide open.
To close, pull up catch and slide

window until catch engages.

Note
During window opening or closing,
keep the catch raised to allow the
glass sufficient clearance.

Heated rear window

Operated by pressing the Ü button.
Heating functions with the engine

running and is switched off
automatically after a short time.

Climate control system 3 82.

Sun visors

The sun visors can be folded down or
swivelled to the side to prevent
dazzling.

If the sun visors have integral mirrors,
the mirror covers should be closed
when driving.

Keys, doors and windows 31

32 Seats, restraints

Seats, restraints

Head restraints ............................ 32

Front seats ................................... 33

Rear seats ................................... 36

Seat belts ..................................... 39

Airbag system .............................. 42

Child restraints ............................. 45

Head restraints

Position

9 Warning

Only drive with the head restraint
set to the proper position.

The upper edge of the head restraint
should be at upper head level. If this
is not possible for extremely tall
people, set to highest position, and
set to lowest position for small people.

Adjustment

Pull the head restraint upwards or
push the head restraint downwards.

Note
Approved accessories may only be
attached to the front passenger seat
head restraint if the seat is not in use.

Seats, restraints 33

Head restraint removal

To remove the head restraints, pull
lock tab and pull the restraint
upwards.

Stow head restraints securely in load
compartment. Do not drive with head
restraints removed if the seat is
occupied.

Front seats

Seat position

9 Warning

Only drive with the seat correctly
adjusted.

Sit with buttocks as far back against

■
the backrest as possible. Adjust the
distance between the seat and the
pedals so that legs are slightly
angled when pressing the pedals.
Slide the front passenger seat as
far back as possible.

■ Sit with shoulders as far back
against the backrest as possible.
Set the backrest rake so that it is
possible to reach the steering
wheel with arms slightly bent.
Maintain contact between
shoulders and the backrest when
turning the steering wheel. Do not
angle the backrest too far back. We
recommend a maximum rake of
approx. 25°.

■ Adjust the steering wheel 3 58.

■ Set seat height high enough to
have a clear field of vision on all
sides and of all display instruments.
There should be at least one hand
of clearance between head and the
roof frame. Thighs should rest
lightly on the seat without pressing
into it.

■ Adjust the head restraint 3 32.

■ Adjust the height of the seat belt
3 40.

■ Adjust the lumbar support so that it
supports the natural shape of the
spine 3 34.

34 Seats, restraints

Seat adjustment

9 Danger

Do not sit nearer than 25 cm from
the steering wheel, to permit safe
airbag deployment.

9 Warning

Never adjust seats while driving as
they could move uncontrollably.

Seat positioning

Pull handle, slide seat, release
handle.

Seat backrests

Pull lever, adjust inclination and
release lever. Allow the backrest to
engage audibly.

Do not lean on seat when adjusting.

Seat height

Lift lever and adjust body weight on
seat to adjust height.

Seats, restraints 35

Lumbar support

Adjust lumbar support using
handwheel to suit personal
requirements.

Rotate handwheel to increase and
decrease support.

Armrest

Adjust armrest support to suit
personal requirements.

■ Raise armrest in increments to
desired height.

■ To reposition, fully raise armrest
before lowering.

Heating

Press the ß button for the respective
seat. Press the ß button again to
switch off.

Seat heating is thermostatically
controlled and switches off
automatically when seat temperature
is sufficient.

Control indicator in the button
illuminates when the system is on, not
just when heating is active.

Prolonged use of the highest setting
for people with sensitive skin is not
recommended.

36 Seats, restraints

Seat heating is operational when the
engine is running.

Rear seats

Second row seats

9 Warning

Never adjust seats while driving as
they could move uncontrollably.

To enable long items to be stored
under the seats the centre seat trim
cover can be unclipped.

When folding or removing the rear
seat ensure the armrests are folded
away in their most upright position.

Also remove the lower seat trim side
pocket by disconnecting it from the
fixings.

Seats, restraints 37

Rear seat access

To facilitate access to the rear seats,
fold the seat backrest forwards. If
necessary release the two-latch seat
belt from its buckles.

9 Warning

Ensure that the backrest returns to
its correct position and the seat
belt buckles engage securely.

Fitting seat belt 3 40.

Folding seats

On some variants, the cargo area can
be increased by folding up the rear
seats.

Remove the head restraints 3 32.
Push the seat backrest rearwards 1,

then pull the side handle to release 2.
Fold the backrest forward onto the

seat base 3, if necessary release the
two-latch seat belts from their
buckles.

Release both locking bars at the rear
base of the seat by pulling rearwards

4.

Lift and fold the seat assembly, until
the seat frame rests in place.

9 Warning

When folding the seat use caution

- beware of moving parts. Ensure
the seat is secure when
completely folded.

To return the folding seat to the
upright position, support the seat
assembly and release the bar by
pulling the bar directly towards you.

38 Seats, restraints

Gradually lower the seat assembly,
allowing the rear support legs to fold
down. Lower the seat completely,
ensuring the rear support legs are
located, and latched.

Raise the backrest, reinstall head
restraints and connect the seat belts.

9 Warning

When installing the seat, ensure
that the seat is properly located on
the anchor points and that the
locking catches are fully engaged,
the backrest is returned to the
correct position and the seat belts
are engaged securely.

Removable rear seats

On some variants, the cargo area can
be increased by removing the rear
seats.

Release the seats by pressing down
and sliding forward the locking catch
located on the left and right hand seat
mountings.

With both catches raised, push the
seat unit towards the rear and release
them from the floor anchor points.
The seat can then be lifted out.

The seats must be removed through
the sliding door only.

9 Warning

Removable seats are heavy! Do
not attempt to remove without
assistance.

When installing the seats, ensure
that the seats are properly located
on the anchor points and that the
locking catches are fully engaged.

Seats, restraints 39

9 Warning

When re-installing seats always
ensure that the row with the folding
access seat B is positioned
correctly in front of the fixed seat
row A.

If the seats are incorrectly
positioned, access for passengers
is seriously impeded.

Seat belts

The seat belts are locked during
heavy acceleration or deceleration of
the vehicle holding the occupants in
the sitting position. Therefore, the risk
of injury is considerably reduced.

9 Warning

Fasten seat belt before each trip.
In the event of an accident, people

not wearing seat belts endanger
their fellow occupants and
themselves.

Seat belts are only designed for use
by one person at a time. Child
restraint system 3 45.

Periodically check all parts of the belt
system for damage and proper
functionality.

Have damaged components
replaced. After an accident, have the
belts and triggered belt tensioners
replaced by a workshop.

Note
Make sure that the belts are not
damaged by shoes or sharp-edged
objects or trapped. Prevent dirt from
getting into the belt retractors.

Seat belt reminder X 3 68.

Belt force limiters

On the front seats, stress on the body
is reduced by the gradual release of
the belt during a collision.

Belt tensioners

In the event of a head-on or rear-end
collision of a certain severity, the front
seat belts are tightened.

40 Seats, restraints

9 Warning

Incorrect handling (e.g. removal or
fitting of belts) can trigger the belt
tensioners with risk of injury.

Deployment of the belt tensioners is
indicated by continuous illumination
of control indicator v 3 68.

Triggered belt tensioners must be
replaced by a workshop. Belt
tensioners can only be triggered
once.

Note
Do not affix or install accessories or
other objects that may interfere with
the operation of the belt tensioners.
Do not make any modifications to
belt tensioner components as this
will invalidate the vehicle type
approval.

Three-point seat belt

Fitting

Withdraw the belt from the retractor,
guide it untwisted across the body
and insert the latch plate into the
buckle. Tighten the lap belt regularly
whilst driving by pulling the shoulder
belt.

Seat belt reminder 3 68.

Loose or bulky clothing prevents the
belt from fitting snugly. Do not place
objects such as handbags or mobile
phones between the belt and your
body.

9 Warning

The belt must not rest against hard
or fragile objects in the pockets of
your clothing.

Seats, restraints 41

Height adjustment

Slide adjuster up or down to desired
position:

■ Press button on adjuster then slide
downwards.

■ Pull up adjuster without pressing
button.

Adjust the height so that the belt lies
across the shoulder. It must not lie
across the throat or upper arm.

Do not adjust while driving.

Removing

To release belt, press red button on
belt buckle.

Seat belts on the rear seats

Two-latch belt

Before fitting the belt, first insert lower
latch plate into the buckle on the
outside of the seat.

The belt can now be used in the same
way as a standard seat belt.

42 Seats, restraints

9 Warning

The seat belt will not be effective
in the event of an accident if the
lower latch is not correctly fitted.

When releasing the seat belt,
ensure that the central buckle is
always released before the buckle
on the side of the seat.

Always remove the lower latch
plate from the outside buckle
before removing seats from the
vehicle or to facilitate access to the
rear seats.

Second row seats 3 36.

Using the seat belt while pregnant

9 Warning

The lap belt must be positioned as
low as possible across the pelvis
to prevent pressure on the
abdomen.

Airbag system

The airbag system consists of a
number of individual systems
depending on the scope of
equipment.

When triggered the airbags inflate
within milliseconds. They also deflate
so quickly that it is often unnoticeable
during the collision.

9 Warning

If handled improperly the airbag
systems can be triggered in an
explosive manner.

Note
The airbag systems and belt
tensioner control electronics are
located in the centre console area.
Do not put any magnetic objects in
this area.

Do not stick anything on the airbag
covers and do not cover them with
other materials.

Seats, restraints 43

Each airbag is triggered only once.
Have deployed airbags replaced by
a workshop.

Do not make any modifications to
the airbag system as this will
invalidate the vehicle type approval.

In the event of airbag deployment
have the steering wheel, the
instrument panel, all panelling parts,
the door seals, the handles and the
seats removed by a workshop.

When the airbags inflate escaping hot
gases may cause burns.

Control indicator v for airbag systems
3 68.

Front airbag system

The front airbag system consists of
one airbag in the steering wheel and
one in the instrument panel on the
front passenger side. These can be
identified by the word AIRBAG.

The front airbag system is triggered in
the event of an accident of a certain
severity. The ignition needs to be
switched on.

The inflated airbags cushion the
impact, thereby reducing the risk of
injury to the upper body and head of
the front seat occupants
considerably.

9 Warning

Optimum protection is only
provided when the seat is in the
proper position 3 33.

Keep the area in which the airbag
inflates clear of obstructions.

Fit the seat belt correctly and
engage securely. Only then the
airbag is able to protect.

Side airbag system

The side airbag system consists of an
airbag in each front seat backrest.
This can be identified by the word
AIRBAG.

The side airbag system is triggered in
the event of an accident of a certain
severity. The ignition needs to be
switched on.

44 Seats, restraints

The inflated airbags cushion the
impact, thereby reducing the risk of
injury to the upper body and pelvis in
the event of a side-on collision
considerably.

9 Warning

Keep the area in which the airbag
inflates clear of obstructions.

Note
Only use protective seat covers that
have been approved for the vehicle.
Be careful not to cover the airbags.

Curtain airbag system

The curtain airbag system consists of
an airbag in the roof frame on each
side. This can be identified by the
word AIRBAG on the headlining trim.

The curtain airbag system is triggered
in the event of an accident of a certain
severity. The ignition needs to be
switched on.

The inflated airbags cushion the
impact, thereby reducing the risk of
injury to the head in the event of a
side-on impact considerably.

9 Warning

Keep the area in which the airbag
inflates clear of obstructions.

Airbag deactivation

Front airbag and side airbag systems
for the front passenger seat have to
be deactivated if a child restraint
system is to be fitted on this seat. The
curtain airbag system, the belt
tensioners and all driver airbag
systems will remain active.

Seats, restraints 45

The airbag deactivation system is
indicated by a label on the side of the
instrument panel, visible when the
front passenger door is open.

Front passenger airbag system can
be deactivated via a switch located on
the front passenger door.

With the front passenger door open,
press switch in and rotate anti­clockwise to the OFF position.

Front passenger seat airbags are
deactivated and will not inflate in the
event of a collision. Control indicator
W illuminates continuously in the
instrument cluster. A child restraint

system can be installed in
accordance with the installation
locations chart 3 47.

9 Danger

Risk of fatal injury for a child using
a child restraint system together
with activated front passenger
airbag.

Risk of fatal injury for an adult
person with deactivated front
passenger airbag.

As long as control indicator W is not
illuminated, the airbag systems for
the front passenger seat will inflate in
the event of a collision.

Change status only when the vehicle
is stopped with the ignition off. Status
remains until the next change.

If control indicator W remains
illuminated together with v, this
indicates a fault within the system.
Seek the assistance of a workshop.

Control indicator for airbag
deactivation 3 68.

Child restraints

Child restraint systems

We recommend the Vauxhall child
restraint system which is tailored
specifically to the vehicle.

When a child restraint system is being
used, pay attention to the following
usage and installation instructions
and also those supplied with the child
restraint system.

Always comply with local or national
regulations. In some countries, the
use of child restraint systems is
forbidden on certain seats.

9 Warning

When using a child restraint
system on the front passenger
seat, the airbag systems for the
front passenger seat must be

46 Seats, restraints

deactivated; if not, the triggering of
the airbags poses a risk of fatal
injury to the child.

This is especially the case if rear­facing child restraint systems are
used on the front passenger seat.

Airbag deactivation 3 44.

Selecting the right system

The rear seats are the most
convenient location to fasten a child
restraint system.

Children should travel facing
rearwards in the vehicle as long as
possible. This makes sure that the
child's backbone, which is still very
weak, is under less strain in the event
of an accident.

Suitable are restraint systems that
comply with ECE 44-03 or
ECE 44-04. Check local laws and
regulations for mandatory use of child
restraint systems.

Ensure that the child restraint system
to be installed is compatible with the
vehicle type.

Ensure that the mounting location of
the child restraint system within the
vehicle is correct.

Allow children to enter and exit the
vehicle only on the side facing away
from the traffic.

When the child restraint system is not
in use, secure the seat with a seat belt
or remove it from the vehicle.

Note
Do not stick anything on the child
restraint systems and do not cover
them with any other materials.

A child restraint system which has
been subjected to stress in an
accident must be replaced.

Child restraint installation locations

Permissible options for fitting a child restraint system

Front seats - All variants

Single seat - front passenger side

Weight and age class

Group 0: up to 10 kg
or approx. 10 months
Group 0+: up to 13 kg
or approx. 2 years

Group I: 9 to 18 kg
or approx. 8 months to 4 years

Group II: 15 to 25 kg
or approx. 3 to 7 years
Group III: 22 to 36 kg
or approx. 6 to 12 years

without airbag with airbag

U

U

U

2)

U

2)

U

2)

U

Seats, restraints 47

1)

Bench seat - front passenger side

without airbag with airbag

centre outer centre outer

X U X

UF U UF

UF U UF

2)

U

2)

U

2)

U

1)

If adjustable, ensure seat is in its rearmost position. Make sure vehicle seat belt is as straight as possible between
shoulder and upper anchorage point.

2)

Ensure the front passenger airbag system is deactivated when installing a child restraint in this position.

48 Seats, restraints

Combi - rear seats

2nd row seats 3rd row seats

Weight and age class

Driver side
outer seat Centre

Passenger side
outer seat Outer Centre

Group 0: up to 10 kg
or approx. 10 months
Group 0+: up to 13 kg

U, < U, <

U X X

or approx. 2 years

Group I: 9 to 18 kg

U, < U, <

U X X

or approx. 8 months to 4 years

Group II: 15 to 25 kg
or approx. 3 to 7 years
Group III: 22 to 36 kg

U U U X X

or approx. 6 to 12 years

3)

It is only permissible to install a universal child seat to the third seat row as long as the second row seats have been
removed and the seat belts are of sufficient length for the child seat type.

4)

On vehicles with a 2-seat bench only in the second row, it is permissible to install a universal child restraint on the third
seat row but only on the passenger side outer seat (i.e. nearest the sliding side door), due to the increased clearance
in front of it.

3)4)

Seats, restraints 49

Tour - rear seats

2nd row seats 3rd row seats

Weight and age class

Driver side
outer seat Centre

Passenger side
outer seat Outer Centre

Group 0: up to 10 kg
or approx. 10 months
Group 0+: up to 13 kg

U, < U, <

U X X

or approx. 2 years

Group I: 9 to 18 kg

U, < U, <

U X X

or approx. 8 months to 4 years

Group II: 15 to 25 kg
or approx. 3 to 7 years
Group III: 22 to 36 kg

U U U X X

or approx. 6 to 12 years

3)

It is only permissible to install a universal child seat to the third seat row as long as the second row seats have been
removed and the seat belts are of sufficient length for the child seat type.

4)

On vehicles with a 2-seat bench only in the second row, it is permissible to install a universal child restraint on the third
seat row but only on the passenger side outer seat (i.e. nearest the sliding side door), due to the increased clearance
in front of it.

3)4)

50 Seats, restraints

U = Suitable for universal category restraint systems for use in this weight and age class, in conjunction with three-point

seat belt.

UF = Suitable for universal category forward-facing restraint systems for use in this weight and age class, in conjunction

with three-point seat belt.

= Suitable for ISOFIX child restraint system with mounting brackets and anchorage points, where fitted. When

<

mounting an ISOFIX child restraint system, only systems that have been approved for the vehicle may be used.
Refer to "Permissible options for fitting an ISOFIX child restraint system".

X = Seat position not suitable for children in this weight and age class.

ISOFIX size class and seat device

A - ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg.
B - ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
B1 - ISO/F2X = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
C - ISO/R3 = Rear-facing child restraint system for children of maximum size in the weight class up to 13 kg.
D - ISO/R2 = Rear-facing child restraint system for smaller children in the weight class up to 13 kg.
E - ISO/R1 = Rear-facing child restraint system for young children in the weight class up to 13 kg.

Seats, restraints 51

Permissible options for fitting an ISOFIX child restraint system

Weight class Size class Fixture Front seats 2nd row seats 3rd row seats

Driver side
outer seat Centre

Group 0: up to 10 kg E ISO/R1 X IL IL X X

Group 0+: up to 13 kg E ISO/R1 X IL IL X X

D ISO/R2 X IL IL X X

C ISO/R3 X IL

IL

Group I: 9 to 18 kg D ISO/R2 X IL IL X X

C ISO/R3 X IL

IL

B ISO/F2 X IL, IUF IL, IUF X X

B1 ISO/F2X X IL, IUF IL, IUF X X

A ISO/F3 X IL, IUF IL, IUF X X

IL = Suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.

The ISOFIX restraint system must be approved for the specific vehicle type.
IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight class.
X = No ISOFIX child restraint system approved in this weight class.

Passenger side
outer seat

5)

X X

5)

X X

5)

An ISOFIX child restraint system in this size class can only be fitted on this seat in vehicles with a single front passenger
seat.

52 Seats, restraints

Isofix child restraint systems

Fasten vehicle-approved ISOFIX
child restraint systems to the ISOFIX
mounting brackets.

When using ISOFIX mounting
brackets for seat mounting,
universally approved child restraint
systems for ISOFIX may be used.

Permissible mounting location
positions for ISOFIX child restraint
systems are marked in the tables by
<, IL and IUF.

Top-tether fastening eyes

Top-Tether fastening eyes are
located on the back of the seat.

In addition to the ISOFIX mounting,
fasten the Top-Tether strap to the
Top-Tether fastening eyes. The strap
must run between the two guide rods
of the head restraint.

ISOFIX child restraint systems of
universal category positions are
marked in the table by IUF.

Storage 53

Storage

Storage compartments ................ 53

Load compartment ....................... 54

Roof rack system ......................... 56

Loading information ..................... 56

Storage compartments

Instrument panel storage

Storage compartments, pockets and
trays are located in the instrument
panel.

A coin holder and/or a phone holder
are located on the top of the
instrument panel.

Glovebox

The glovebox features a sunglasses
holder.

Close the glovebox while driving.

Cupholders

Cupholders are located at either end
of the instrument panel.

To use cupholders remove the
ashtray unit.

Front storage

Two coat hooks are located on the
cabin bulkhead.

The front door pockets contain bottle
holders.

54 Storage

Overcab storage

The total weight in this compartment
must not exceed 30 kg.

Load compartment

Load compartment cover

Do not place any objects on the cover.

Removing

Lift cover and disconnect from the
side guides.

Load rails and hooks

Load anchorage rails mounted in the
load compartment provide adjustable
anchorage points for securing cargo.

■ Release centre pin of the
anchorage point by pulling out
against spring tension,

■ slide the anchorage point to the
required position, directly over a
suitable locking hole,

Storage 55

■ release the centre pin of the
anchorage point, ensuring the pin is
located correctly and the
anchorage point is securely locked,

■ cargo can then be secured in
position using lashing straps
attached to the anchorage point.

The maximum load of each
anchorage point is 75 kg. To prevent
the possibility of exceeding this
maximum, the use of ratchet type
lashing straps is to be avoided.

Lashing eyes

The lashing eyes are designed to
secure items against slippage, e.g.
using lashing straps or a luggage floor
net.

The maximum force applied to the
lashing eyes should not exceed
5000 N at 30°.

Safety net

The safety net can be installed behind
the front seats or the rear seats.

Passengers must not be transported
behind the safety net.

Installing (front or rear position)

Lift the covers to access the
mountings, insert the load
compartment net rod into the mounts
and secure. Attach the straps to the
lashing eyes behind the front seats; or
to the rings on the rear seat frame,
then tension the straps.

Removal

Tilt strap length adjuster upwards and
unhook strap.

Warning triangle

The warning triangle can be
accommodated in the space under
the front seats.

First aid kit

The first aid kit can be accommodated
in the space under the front seats.

56 Storage

Roof rack system

Roof rack

For safety reasons and to avoid
damage to the roof, the vehicle
approved roof rack system is
recommended.

Note
The front roof rack fixing points
located above the cab area are for
installation of the full roof rack
system only and must not be used to
attach roof bars.

Follow the installation instructions
and remove the roof rack when not in
use.

Further information 3 56.

Loading information

■ Heavy objects in the load
compartment should be evenly
distributed and placed as far
forward as possible. If objects can
be stacked, the heavier objects
should be placed at the bottom.

■ Secure objects with lashing straps
attached to lashing eyes.

■ Secure loose objects in load
compartment to prevent sliding.

■ Do not place any objects on the
load compartment cover or the
instrument panel.

■ The load must not obstruct the
operation of the pedals, parking
brake and gear selector, or hinder
the freedom of movement of the
driver. Do not place any unsecured
objects in the interior.

■ Do not drive with an open load
compartment. In addition, the
number plate is only
distinguishable and illuminated
correctly if the doors are closed.

■ The payload is the difference
between the permitted gross
vehicle weight (see identification
plate 3 147) and the EC kerb
weight.

To calculate the EC kerb weight,
enter the data for your vehicle in the
Weights table at the front of this
manual.

The EC kerb weight includes
weights for the driver (68 kg),
luggage (7 kg) and all fluids (tank
90 % full).

Optional equipment and
accessories increase the kerb
weight.

■ Driving with a roof load increases
the sensitivity of the vehicle to
cross-winds and has a detrimental
effect on vehicle handling due to
the vehicle’s higher centre of
gravity. Distribute the load evenly
and secure it properly with retaining
straps. Adjust the tyre pressure and
vehicle speed according to the load
conditions. Check and retighten the
straps frequently.

Do not drive faster than 75 mph.

The permissible roof load (which
includes the weight of the roof rack)
is 280 kg for standard roof variants
and 210 kg for high roof variants
(excludes Platform cab
conversions). The roof load is the
combined weight of the roof rack
and the load.

The permissible roof load on the
approved full length roof rack
system is 210 kg for standard roof
variants and 140 kg for high roof
variants (excludes Platform cab
conversions). The roof load is the
combined weight of the roof rack
and the load.

Storage 57

58 Instruments and controls

Instruments and controls

Controls ....................................... 58

Warning lights, gauges and

indicators ..................................... 63

Information displays ..................... 72

Vehicle messages ........................ 73

Trip computer ............................... 74

Tachograph .................................. 76

Controls

Steering wheel adjustment

Unlock lever, adjust steering wheel,
then engage lever and ensure it is
fully locked.

Do not adjust steering wheel unless
vehicle is stationary and steering
wheel lock has been released.

Steering wheel controls

The cruise control and speed limiter
can be operated via the controls on
the steering wheel.

Cruise control and speed limiter
3 102.

Instruments and controls 59

Horn

Press j.
The horn will sound regardless of

ignition switch position.

Steering column controls

The Infotainment system can be also
operated via the controls on the
steering column.

Further information is available in the
Infotainment manual.

Windscreen wiper/washer

Windscreen wiper

K

= timed interval wipe
1 = slow
2 = fast

Do not use if the windscreen is frozen.
Switch off in car washes.

Automatic wiping with rain sensor

K

= automatic wiping with rain

sensor

The rain sensor detects the amount of
water on the windscreen and
automatically regulates the frequency
of the windscreen wipers.

Automatic wiping will need to be
reselected whenever the ignition has
been switched off.

60 Instruments and controls

Adjustable sensitivity of the rain sensor

Turn the adjuster wheel to adjust the
sensitivity:

low
sensitivity
high
sensitivity

Keep the sensor free from dust, dirt
and ice.

= turn adjuster wheel

downwards

= turn adjuster wheel

upwards

Windscreen washer

Pull lever. Washer fluid is sprayed
onto the windscreen.

short
pull
long pull = wiper swipes for a few

= wiper swipes once

strokes

Rear window wiper/washer

Turn:
0 = off

e

= wiper operation

f

= washer fluid is sprayed onto the

rear window

Instruments and controls 61

Outside temperature

A drop in temperature is indicated
immediately and a rise in temperature
after a time delay.

If outside temperatures drop to 3 °C,
the °C flashes in the information
display as a warning for icy road
conditions. This will continue to flash
until temperatures rise above 3 °C.

9 Warning

The road surface may already be
icy even though the display
indicates a few degrees above
0 °C.

Clock

Depending on vehicle, the current
time may appear in the information
display and/or the Driver Information
Centre.

Information display:

Hours and minutes can be adjusted
by pressing the appropriate buttons
by the display or with the Infotainment
system controls.

For further information, refer to the
Infotainment system manual.

Driver Information Centre:

Display the clock function by pressing
the button repeatedly on the end of
the wiper lever. When the time
flashes (after approx. 2 seconds),
press and hold the button:

■ Hours flash,

■ Press button repeatedly to change
hours,

■ Press and hold button to set hours,

■ Minutes flash,

■ Press button repeatedly to change
minutes,

■ Press and hold button to set
minutes.

62 Instruments and controls

Power outlets

12 V power outlets are located in the
instrument panel and in the rear of the
vehicle.

Connecting electrical accessories
while the engine is off will discharge
the battery. Do not exceed the
maximum power consumption of
120 watts. Do not connect any
current-delivering accessories, e.g.
electrical charging devices or
batteries.

Electrical accessories that are
connected must comply with the
electromagnetic compatibility
requirements laid down in
DIN VDE 40 839.

Do not connect any current-delivering
accessories, e.g. electrical charging
devices or batteries.

Caution

Do not damage the outlet by using
unsuitable plugs.

Cigarette lighter

The cigarette lighter is located in the
instrument panel.

Press in cigarette lighter. It switches
off automatically once the element is
glowing. Pull out lighter.

Instruments and controls 63

Ashtrays

Caution

To be used only for ash and not for
combustible rubbish.

Portable ashtray

Ashtray container for mobile use in
the vehicle. To use, open cover.

Warning lights, gauges and indicators

Speedometer

Indicates vehicle speed.
Maximum speed may be restricted by

a speed regulator. As a visible
indication of this, a warning label is
located on the instrument panel.

A warning buzzer will sound for
10 seconds if the vehicle briefly
exceeds the set limit.

Note
Under certain conditions (e.g. steep
inclines) the vehicle speed may
exceed the set limit.

Odometer

Displays the recorded distance.

Trip odometer

The trip odometer appears below the
odometer and displays the distance
travelled since the last reset.

To reset, with the trip odometer
displayed, press and hold the button
on the end of the wiper lever for a few

64 Instruments and controls

seconds with the ignition on. The
display will flash and the value will
reset to zero.

Tachometer

Displays the engine speed.
Drive in a low engine speed range for

each gear as much as possible.

Caution

If the needle is in the red warning
zone, the maximum permitted
engine speed is exceeded. Engine
at risk.

Fuel gauge

Displays fuel level in the tank.
The illumination of bars corresponds

to fuel level.

When the tank is full, all bars are
illuminated, except the low fuel
warning bar (furthest to the left of the
fuel gauge), which remains hollow.

When the low fuel warning bar
illuminates in the fuel gauge (i.e.
changes from hollow to solid), control
indicator Y also illuminates in lower
part of instrument cluster 3 66; fuel
level is very low: refuel immediately
3 108.

Never run the tank dry. Diesel fuel
system, bleeding 3 119.

Note
To ensure the fuel level is displayed
correctly, the ignition must be
switched off before refuelling. Avoid
minor fuel top-ups (e.g. less than
5 litres) to ensure accurate readings.

Instruments and controls 65

Because of the fuel remaining in the
tank, the top-up quantity may be less
than the specified tank capacity.

Engine oil level monitor

The engine oil level monitor is correct
only if the vehicle is parked on a level
surface with a cold engine.

If the minimum engine oil level is
reached, the message OIL is
displayed in the Driver Information
Centre for 30 seconds after the
ignition is switched on. Check and top
up engine oil 3 114.

If the engine oil level is correct when
the ignition is switched on, the
message OIL LEVEL CORRECT
appears briefly in the Driver
Information Centre.

If the engine oil is above the minimum
level, press the trip computer button
on the end of the wiper lever within
30 seconds of switching on the
ignition. The message OIL LEVEL is
displayed in combination with
squares that correspond to the oil
level.

As the oil level diminishes, the
squares in the oil level display are
replaced with dashes:

▢▢▢▢▢▢ = Maximum level
▢▢▢- - - = Intermediate level

- - - - - - = Minimum level.

To exit the oil level monitor display,
press the trip computer button.

Trip computer 3 74.

Service display

When the ignition is switched on, the
remaining distance before the next
service is due may be shown briefly in
the Driver Information Centre. Based
on driving conditions, the interval at
which a service will be indicated can
vary considerably.

When the remaining distance before
the next service is less than
1800 miles or 2 months, SERVICE
IN appears in the Driver Information
Centre.

When the distance reaches 0 miles or
the service date is due, control
indicator A and F illuminate in the

instrument cluster and the Driver
Information Centre respectively, and
the corresponding message
SERVICE DUE appears in the Driver
Information Centre.

The vehicle needs a service. Seek the
assistance of a workshop.

Resetting the service display

After a service, the service display
must be reset. If available, select the
distance before service display in the
Driver Information Centre, then press
and hold the button on the end of the
wiper lever until the distance before
service is displayed continuously.
Trip computer 3 74.

Driver Information Centre 3 72.
Service information 3 143.

66 Instruments and controls

Transmission display

The mode or selected gear of the
manual transmission automated is
shown in the Driver Information
Centre.

R = Reverse gear
N = Neutral
A = Automatic mode
kg = Laden mode

= Winter mode

V

= Apply foot brake

T

= Transmission electronics

W

Manual transmission automated
3 95.

Control indicators

The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions.

Depending on the equipment the
position of the control indicators may
vary.

When the ignition is switched on,
most control indicators will illuminate
briefly as a functionality test.

The control indicator colours mean:
red = danger, important

reminder
yellow = warning, information, fault
green = confirmation of activation
blue = confirmation of activation

Control indicators in the instrument cluster

Instruments and controls 67

68 Instruments and controls

Turn signal

O flashes green.
Flashes if a turn signal or the hazard

warning flashers are activated.
Rapid flashing: failure of a turn signal

light or associated fuse.
An audible warning can be heard

when the turn signals are on. When
towing a trailer, the pitch of the
audible warning changes.

Bulb replacement 3 120.
Fuses 3 125.
Turn signals 3 79.

Seat belt reminder

X illuminates in red.
If the seat belt is not fastened, X will

flash when vehicle speed exceeds
approx. 10 mph. An audible warning
also sounds for approx. 90 seconds.

9 Warning

Fasten seat belt before each trip.
In the event of an accident, people

not wearing seat belts endanger
their fellow occupants and
themselves.

Airbag and belt tensioners

v illuminates yellow.
When the ignition is switched on, the

control indicator illuminates briefly. If
it does not illuminate or illuminates
whilst driving, there is a fault in the
belt tensioner or the airbag system.
The airbags and belt tensioners may
fail to trigger in the event of an
accident.

Deployment of the belt tensioners or
airbags is indicated by continuous
illumination of v.

9 Warning

Have the cause of the fault
remedied immediately by a
workshop.

Belt tensioners, airbag system 3 39,
3 42.

Airbag deactivation

W illuminates yellow when the
ignition is switched on and remains
illuminated when the front passenger
airbag has been deactivated.

If control indicator W is illuminated in
conjunction with v or A, seek the
assistance of a workshop.

Instruments and controls 69

9 Danger

Risk of fatal injury for a child using
a child restraint system together
with activated front passenger
airbag.

Risk of fatal injury for an adult
person with deactivated front
passenger airbag.

Airbag system 3 42, belt tensioners
3 39, airbag deactivation 3 44.

Charging system

p illuminates red.
Illuminates when the ignition is

switched on and goes out shortly after
the engine starts.

Illuminates when the engine is running

Stop, switch off engine. Battery is not
charging. Engine cooling may be
interrupted. Power to the brake servo
unit may be cut. Seek the assistance
of a workshop.

Malfunction indicator light

Z illuminates or flashes yellow.
Illuminates when the ignition is

switched on and goes out shortly after
the engine starts.

Illuminates when the engine is running

Fault in the emission control system.
The permitted emission limits may be
exceeded. Seek the assistance of a
workshop immediately.

Flashes when the engine is running

Fault that could lead to catalytic
converter damage. Ease up on the
accelerator until the flashing stops.
Seek the immediate assistance of a
workshop.

Service vehicle soon

A illuminates in yellow.
Illuminates when the ignition is

switched on and goes out shortly after
the engine starts.

May illuminate in combination with
another control indicator or a
message in the Driver Information
Centre. Seek the assistance of a
workshop immediately.

Stop engine

C illuminates in red.
Illuminates together with p, I, W or

R; stop engine immediately and seek
the assistance of a workshop.

Brake system

R illuminates red.
Illuminates when the parking brake is

released if the brake fluid level is too
low 3 118.

9 Warning

Stop. Do not continue your
journey. Consult a workshop.

Illuminates after the ignition is
switched on if the parking brake is
applied 3 99.

70 Instruments and controls

If the message BRAKING FAULT
appears in the Driver Information
Centre there is a fault in the braking
system. Seek the assistance of a
workshop immediately.

Brake system 3 98.

Antilock brake system (ABS)

u illuminates yellow.
Illuminates briefly after the ignition is

switched on. The system is ready for
operation when u goes out.

If control indicator u does not go out
after a few seconds, or if it illuminates
while driving, there is a fault in the
ABS. Control indicator A may also
illuminate in the instrument cluster
together with the messages CHECK
ABS and CHECK ESP in the Driver
Information Centre. The brake
system remains operational but
without ABS regulation.

If control indicators u, A, R and
C illuminate, the ABS and ESP are
deactivated and the message
BRAKING FAULT appears in the

Driver Information Centre. Seek the
assistance of a workshop
immediately.

Antilock brake system 3 99.

Upshift

k or j illuminates green.
It is recommended to shift gear when

illuminated to improve fuel economy.

Electronic Stability Program

v flashes or illuminates yellow.
Illuminates for a few seconds when

the ignition is switched on.

Flashing during driving

The system is actively engaged.
Engine output may be reduced and
the vehicle may be braked
automatically to a small degree.

Illuminates while driving

The system is switched off. The
message ESP OFF will also appear in
the Driver Information Centre.

Plus

ESP®

3 101.

Engine coolant temperature

W illuminates red.

Illuminates when the engine is running

Stop, switch off engine.

Caution

Coolant temperature too high.

Check coolant level 3 116.
If there is sufficient coolant, consult a

workshop.

Preheating

! illuminates yellow.
Preheating is activated. Only

activates when outside temperature
is low.

Instruments and controls 71

Diesel particle filter

8 illuminates yellow.
Illuminates when the diesel particle

filter requires cleaning 3 93.

Engine oil pressure

I illuminates red.
Illuminates when the ignition is

switched on and goes out shortly after
the engine starts.

Illuminates when the engine is running

Caution

Engine lubrication may be
interrupted. This may result in
damage to the engine and/or
locking of the drive wheels.

1. Depress clutch.

2. Select neutral gear, set selector
lever to N.

3. Move out of the flow of traffic as
quickly as possible without
impeding other vehicles.

4. Switch off ignition.

9 Warning

When the engine is off,
considerably more force is needed
to brake and steer.

Do not remove key until vehicle is
stationary, otherwise the steering
wheel lock could engage
unexpectedly.

Check oil level before seeking
assistance of a workshop 3 114.

Low fuel

Y illuminates yellow.
Illuminates when level in fuel tank is

too low; refuel immediately 3 108
Catalytic converter 3 93.
Bleeding the diesel fuel system

3 119.

Exterior light

9 illuminates green.
Illuminated when the exterior lights

are on 3 77.

High beam

P illuminates blue.
Illuminated when high beam is on and

during headlight flash 3 78.

Fog light

> illuminates green.
Illuminated when the front fog lights

are on 3 79.

Rear fog light

r illuminates yellow.
Illuminated when the rear fog light is

on 3 80.

Cruise control

m, U illuminates green.

72 Instruments and controls

m illuminates green when a certain
speed is stored.

U illuminates green when the system
is on.

Speed limiter

U illuminates yellow.
U illuminates yellow when the

system is on.
Cruise control, Speed limiter 3 102.

Information displays

Driver Information Centre

Depending on vehicle configuration,
the following items appear in the
display:

■ Odometer, trip odometer 3 63

■ Fuel gauge 3 64

■ Engine oil level monitor 3 65

■ Service display 3 65

■ Transmission display 3 66

■ Vehicle messages 3 73

■ Trip computer 3 74

Triple-Info-Display

Displays time, outside temperature
and Infotainment system information.

■ Outside temperature 3 61

■ Clock 3 61
For further information, refer to the

Infotainment system manual.

Instruments and controls 73

Vehicle messages

Messages are shown in the Driver
Information Centre, in combination
with illumination of control indicator
A or C in the instrument cluster.

Information messages

Information messages

BATTERY MODE: ECONOMY

ESP OFF

AUTO LIGHTS DEACTIVATED

OIL LEVEL CORRECT

Fault messages

Will be displayed in combination with
control indicator A. Drive with
caution and seek the assistance of a
workshop.

To remove fault message, press the
button on the end of the wiper lever.
After a few seconds the message
may disappear automatically and A

remains illuminated. The fault will
then be stored in the on board
system.

Fault messages

CHECK ESP

CHECK FUEL FILTER

CHECK GEARBOX

CHECK AUTO LIGHTS

Warning messages

These appear with control indicator
C. Stop engine immediately and
seek the assistance of a workshop.

Warning messages

INJECTION FAULT

ENGINE OVERHEATING

GEARBOX OVERHEATING

Warning chimes

When starting the engine or whilst driving:

■ During operation of the turn and
lane-change signals.

■ If seat belt is not fastened.

■ If the parking assist detects an
object.

■ If the vehicle has manual
transmission automated and the
clutch temperature is too high.

■ In vehicles with manual
transmission automated; when a
door is open while neutral is not
selected. A corresponding
message appears in the Driver
Information Centre.

■ If the vehicle speed briefly exceeds
a set limit.

74 Instruments and controls

When the vehicle is parked and/ or the driver's door is opened:

■ When the key has been left in the
ignition.

■ With exterior lights on.

■ If the vehicle has manual
transmission automated; neutral is
not selected or the foot brake has
not been depressed.

Engine oil level

If the minimum engine oil level is
reached, the message OIL is
displayed in the Driver Information

Centre for 30 seconds after the
ignition is switched on. Check oil level
3 114.

The oil level message will only be
reset if the ignition has been switched
off for more than 2 minutes.

To gain a more accurate indication of
the oil level, press the button on the
end of the wiper lever within
30 seconds of switching on the
ignition. Engine oil level monitor
3 65.

Trip computer

The trip computer provides
information on driving data, which is
continually recorded and evaluated
electronically.

Depending on vehicle, the following
functions can be selected by pressing
the button repeatedly on the end of
the wiper lever:

■ Fuel used

■ Average consumption

■ Instantaneous consumption

■ Range

Instruments and controls 75

■ Distance travelled

■ Average speed

■ Distance before service

■ Clock

■ Cruise control and speed limiter
stored speed

■ Fault and information messages

Fuel used

Displays the amount of fuel
consumed since the last reset.

The measurement can be restarted at
any time by pressing and holding the
button.

Average consumption

The value is displayed after driving a
distance of 0.25 miles.

Average consumption is displayed,
taking into consideration the distance
travelled and the fuel used since the
last reset.

The measurement can be restarted at
any time.

Instantaneous consumption

The value is displayed after reaching
a speed of 20 mph.

Range

The value is displayed after driving a
distance of 0.25 miles.

The range is calculated from the
current contents of the fuel tank and
the average consumption since the
last reset.

The range will not display if control
indicator Y is illuminated in the
instrument cluster 3 71.

The measurement can be restarted at
any time.

Distance travelled

Displays the distance driven since the
last reset.

The measurement can be restarted at
any time.

Average speed

The value is displayed after driving a
distance of 0.25 miles.

The average speed since the last
reset is displayed.

The measurement can be restarted at
any time.

Interruptions in the journey with the
ignition off are not included in the
calculations.

Reset trip computer information

To reset the trip computer, select one
of its functions then press and hold
the button on the end of the wiper
lever.

The following trip computer
information will be reset:

■ Fuel used

■ Average consumption

■ Range

■ Distance travelled

■ Average speed
The trip computer will reset

automatically when the maximum
value of any of the parameters is
exceeded.

76 Instruments and controls

Interruption of power supply

If the power supply has been
interrupted or if the battery voltage
has dropped too low, the values
stored in the trip computer will be lost.

Tachograph

The tachograph is operated as
described in the operating
instructions supplied. Observe
regulations regarding use.

Lighting 77

Lighting

Exterior lighting ............................ 77

Interior lighting ............................. 80

Lighting features .......................... 81

Exterior lighting

Light switch

Turn light switch:

= Off

7

= Sidelights

0

= Headlights

9P

High beam control indicator P 3 71.
Low beam control indicator 9 3 71.

Automatic light control

When the automatic light control
function is activated and the engine is
running, the system switches
between daytime running lights and
headlights depending on the lighting
conditions.

To activate:

1. Switch on the ignition.

2.

Turn light switch to 0 and return
to 7.

78 Lighting

3. Repeat step 2 within approx.
5 seconds.

4. A double acoustic signal sounds
for confirmation.

Repeat the operation to deactivate.
For reasons of safety, it is advisable

to have the automatic light control
function activated.

Daytime running lights

Daytime running lights increase
visibility of the vehicle during daylight.
The lights operate automatically
when the ignition is switched on.

Automatic headlight activation

During poor lighting conditions the
headlights are switched on.

High beam

To change between low and high
beam, pull lever until a click is felt.

Headlight flash

To activate the headlight flash, pull
lever.

Headlight range adjustment

Manual headlight range adjustment

Adapt the headlight range to suit the
vehicle load to prevent dazzling of
oncoming traffic.

Turn knurled wheel to required
position:

0 = No load
4 = Loaded up to permissible

maximum weight

Lighting 79

Headlights when driving abroad

The asymmetrical headlight beam
extends visibility at the edge of the
road at the passenger side.

However, when driving in countries
where traffic drives on the opposite
side of the road, adjust the headlights
to prevent dazzling of oncoming
traffic.

Have the headlights adjusted by a
workshop.

Hazard warning flashers

Operated with the ¨ button.

Turn and lane-change signals

Lever up = right turn signal
Lever down = left turn signal

When the steering wheel is turned
back, the lever automatically returns
to its original position and the
indicator is deactivated. This will not
happen when making a minor
steering manoeuvre such as lane
changing.

When lane changing, move lever part
way to first stop. When released,
lever will spring back.

If the lever is moved past the first stop,
the indicator is switched on
constantly. Switch the indicator off
manually by moving the lever to its
original position.

Front fog lights

Turn inner switch to position >.
Front fog lights will only operate when

the ignition and headlights are
switched on.

80 Lighting

Rear fog lights

Turn inner switch to position >r.
Rear fog light comes on in

conjunction with front fog lights and
will only operate when the ignition and
headlights are switched on.

Reversing lights

The reversing lights come on when
the ignition is on and reverse gear is
selected.

Misted light covers

The inside of the light covers may mist
up briefly in poor, wet and cold
weather conditions, in heavy rain or
after washing. The mist disappears
quickly by itself; to help, switch on the
headlights.

Interior lighting

Interior lights

Depending on vehicle, the interior
lights may be operated with a switch
or by tilting the lens to one of
3 positions, i.e.:

■ On

■ Courtesy lights

■ Off
With the switch or lens in its central

position, the light functions as a
courtesy light and illuminates when
the front doors are opened.

When the front doors are closed, the
courtesy light extinguishes after
approx. 20 seconds or immediately
after the ignition is switched on.

Load compartment lighting

Load compartment lighting can be set
to illuminate when the side and rear
doors are opened, or switched on
constantly.

Lighting 81

Operated by tilting the lens to one of
3 positions, i.e.:

■ On

■ Controlled by the function of the
front interior light

■ Off

When the front interior light is
functioning as a courtesy light, move
the lens of the load compartment light
to its central position; the load
compartment light functions as a
courtesy light and also illuminates
when the side or rear doors are
opened.

When the doors are closed, the
courtesy light extinguishes after
approx. 20 seconds or immediately
after the ignition is switched on.

Reading lights

A separate spotlight for the front
passenger side may be located
alongside the front interior light.
Operated with the switch.

Lighting features

Exit lighting

Headlights come on for approx.
30 seconds after the vehicle is parked
and the system is activated.

Activating

1. Switch off ignition.

2. Remove ignition key.

3. Open driver's door.

4. Pull turn signal lever towards
steering wheel.

This action can be repeated up to four
times to a maximum period of
2 minutes.

The lighting is turned off immediately
by switching on the ignition or turning
the light switch.

82 Climate control

Climate control

Climate control systems ............... 82

Air vents ....................................... 88

Maintenance ................................ 89

Climate control systems

Heating and ventilation system

Controls for:

■ Temperature

■ Fan speed

■ Air distribution
Heated rear window Ü 3 31.

Temperature

red = warm
blue = cold

Heating will not be fully effective until
the engine has reached normal
operating temperature.

Fan speed

Adjust the air flow by switching the fan
to the desired speed.

Air distribution

= to head area

M

= to head area and foot well

L

= to foot well

K

= to windscreen, front door

J

windows and foot well

= to windscreen and front door

V

windows

Intermediate settings are possible.

Demisting and defrosting the windows

■ Set temperature control to warmest
level.

■ Set fan speed to highest level.

■

Set air distribution control to V.

■

Switch on heated rear window Ü.

Climate control 83

■ Open side air vents as required and
direct them towards door windows.

■ For simultaneous warming of the
foot well, set air distribution control
to J.

Air conditioning system

Additional to the heating and
ventilation system, the air
conditioning system has:

AC = cooling

= air recirculation

4

Cooling (AC)

Operated with the AC button and
functional only when the engine and
fan are running.

The air conditioning system cools and
dehumidifies (dries) the air when
outside temperature is a little above
the freezing point. Therefore
condensation may form and drip from
under the vehicle.

If no cooling or drying is required,
switch the cooling system off to save
fuel.

Air recirculation system 4

Operated with the 4 button.

9 Warning

The exchange of fresh air is
reduced in air recirculation mode.
In operation without cooling the air
humidity increases, so the
windows may mist up. The quality
of the passenger compartment air
deteriorates, which may cause the
vehicle occupants to feel drowsy.

In warm and very humid ambient air
conditions, the windscreen might mist
up from outside when cold air is
directed towards it. If windscreen
mists up from outside, activate
windscreen wiper and avoid the use
of air distribution settings J and V.

Maximum cooling

Briefly open the windows so that hot
air can disperse quickly.

■ Cooling AC on.

■

Air recirculation system 4 on.

■

Set air distribution control to M.

■ Set temperature control to coldest
level.

■ Set fan speed to highest level.

■ Open all air vents.

84 Climate control

Rear heating system

The rear passenger compartment
heating fan assists air flow to the rear
passenger compartment via the rear
air vents.

Note
Country-specific version: Heating
will cease to operate if the vehicle
fuel level drops below 11 litres.

The rate of air flow is determined by
the fan. Air temperature is controlled
using the temperature control on the
instrument panel.

The fan has 3 speeds:
0 = off

3 = high speed

Rear air conditioning system

The rear air conditioning system is
actuated in conjunction with the front
passenger compartment air
conditioning system.

Rear air conditioning fan switch

The rear air conditioning fan assists
air flow to the rear passenger
compartment via the rear air vents.

Switch on the fan while the air
conditioning system is operating to
allow cooled and dehumidified (dried)
air to be distributed.

The rate of air flow is determined by
the fan.

The fan has 3 speeds:
0 = off

3 = high speed

Climate control 85

Auxiliary heater

Coolant heater

The Eberspächer engine­independent, fuel-powered coolant
heater provides rapid heating of the
engine coolant to enable heating of
the vehicle interior without the engine
running.

9 Warning

Do not operate the system when
refuelling, when dust or
combustible vapours are present
or in enclosed spaces (e.g.
garage).

Before starting or programming the
system to start, turn the vehicle's
climate control system to heat and the
air distribution to V.

Switch off when not required. Heating
stops automatically after the
programmed runtime. It will also
cease to operate if the vehicle fuel
level drops too low.

During operation, power from the
vehicle battery is used. The driving
time should therefore be at least as
long as the heating time. For short
journey times, check the battery
regularly and recharge if necessary.

To ensure efficient performance,
briefly operate the auxiliary heater
once a month.

Control units

The timer or remote control unit turns
the system on and off, and is used to
programme specific departure times.

Timer

1 X
Activation
button

2 q Back
button

3 Menu bar = Displays the

4 r Next
button

5 OK button = Confirms selection

Remote control

= Switches the

control unit on/off
and changes
displayed
information

= Selects functions in

the menu bar and
adjusts values

selectable functions
Y, x, P, Ö and Y

= Selects functions in

the menu bar and
adjusts values

86 Climate control

The control buttons operate
identically to the timer unit described
previously.

To activate the remote control, press
activation button X and release it
when the menu bar appears in the
display. The signal indicator and
SENd appear briefly in the display,
followed by the temperature.

9 Warning

When refuelling, switch off the
remote control unit as well as the
heater!

To switch off, press and hold
activation button X to prevent
inadvertent operation.

The remote control has a maximum
range of 600 metres. The range may
be reduced due to environmental
conditions and as the battery
becomes weaker.

In addition to the remote control unit,
the heating can also be switched on
for 30 minutes, or off, using the button
on the instrument panel.

Battery replacement
Replace the battery when the range
of the remote control is reduced or
when the battery charge symbol
flashes.

Open the cover using a coin and
replace the battery (CR 2430 or
equivalent), ensuring the new battery
is correctly installed with the positive
(<) side facing the positive terminals.
Replace the cover securely.

Dispose of old batteries in
accordance with environmental
regulations.

Batteries do not belong in household
waste. They must be disposed of at
an appropriate recycling collection
point.

Remote control fault displays
cobA = Poor signal –

adjust position
conP = No signal – move closer
bALo = Battery low –

change battery
Err = System error –

Add,
AddE

consult workshop

= System in learning

mode

Climate control 87

Teach remote control
If the vehicle battery is reconnected,
the LED in the instrument panel
button illuminates and the system
configures the remote control menu
automatically. If the LED flashes,
press OK button on remote control,
select Add or AddE and confirm.

Additional remote control units may
also be configured. Press the button
until LED flashes, switch on the
remote control, select Add and
confirm.

AddE teaches the current remote
control unit exclusively and blocks all
previously configured units. Add
teaches up to 4 remote control units,
but only one unit can operate the
system at any one time.

Operation

Heating Y
Select Y in the menu bar and confirm.

The predetermined heating duration,
e.g. L 30, flashes in the display. The
factory setting is 30 minutes.

To temporarily adjust the heating
duration, adjust with the q or r
button and confirm. The value can be
set from 10 to 120 minutes. Due to the
power consumption, note the heating
duration.

To switch off, select Y in the menu bar
again and confirm.

Ventilation x
Select x in the menu bar and confirm.

The ventilation duration can be
accepted or adjusted. The duration
shown is accepted without
confirmation.

To switch off, select x in the menu bar
again and confirm.

Programming P
Up to 3 preset departure times can be
programmed, either during one day or
over one week.

■ Select P in the menu bar and
confirm

■ Select desired preset memory
number 1, 2 or 3 and confirm

■ Select day and confirm

■ Select hour and confirm

■ Select minutes and confirm

■

Select Y or x and confirm

■ If necessary, adjust the runtime
duration prior to departure and
confirm

The next preset memory number to
be activated is underlined and the
weekday is displayed. Repeat the
procedure to programme the other
preset memory numbers.

Pressing button X during the
procedure will exit without storing
programme adjustments.

To delete a preset departure time,
follow the steps for programming until
heating symbol Y flashes. Press
button q or r until oFF appears in
the display and confirm.

Heating stops automatically
5 minutes after the programmed
departure time.

Note
The remote control system features
a temperature sensor which
calculates the runtime according to
the ambient temperature and the

88 Climate control

desired heating level (ECO or
HIGH). The system starts
automatically between 5 and
60 minutes prior to the programmed
departure time.

Set weekday, time and heating
duration Ö
If the vehicle battery is disconnected
or its voltage is too low, the unit will
need to be reset.

■

Select Ö and confirm

■ Select weekday and confirm

■ Change hours and confirm

■ Change minutes and confirm

■ Change the default heating
duration and confirm

Heating level Y
The preferred heating level for

programmed departure times can be
set to either ECO or HIGH.

Select Y and confirm. ECO or HIGH
flashes in the display. Adjust using
the q or r button and confirm.

Air vents

Adjustable air vents

At least one air vent must be open
while cooling is on in order to prevent
the evaporator from icing up due to
lack of air movement.

Centre air vents

To open or close the vent, turn the
adjuster wheel left or right.

Direct the flow of air by tilting and
swivelling the slats.

Side air vents

To open or close the side air vents,
turn the adjuster wheel left or right.

Direct the flow of air by tilting and
swivelling the slats.

Depending upon the position of the
temperature control, air will be
directed into the vehicle via the side
air vents.

Climate control 89

9 Warning

Do not attach any objects to the
slats of the air vents. Risk of
damage and injury in case of an
accident.

Fixed air vents

Additional air vents are located
beneath the windscreen and door
windows and in the foot wells.

Rear passenger compartment air vents

The air flow is biased towards the
central and right hand air vents for
optimum distribution.

Maintenance

Air intake

The air intake in front of the
windscreen in the engine
compartment must be kept clear to
allow air intake. Remove any leaves,
dirt or snow.

Pollen filter

The pollen filter cleans dust, soot,
pollen and spores from the air
entering the vehicle through the air
intake.

Air conditioning regular operation

In order to ensure continuously
efficient performance, cooling must
be operated for a few minutes once a
month, irrespective of the weather
and time of year. Operation with
cooling is not possible when outside
temperature is too low.

90 Climate control

Service

For optimal cooling performance, it is
recommended that the climate control
system be checked annually, starting
three years after initial vehicle
registration, including:

■ Functionality and pressure test

■ Heating functionality

■ Leakage check

■ Check of drive belts

■ Cleaning of condenser and
evaporator drainage

■ Performance check

Driving and operating 91

Driving and operating

Driving hints ................................. 91

Starting and operating ................. 91

Engine exhaust ............................ 93

Manual transmission .................... 94

Manual transmission

automated .................................... 95

Brakes .......................................... 98

Ride control systems ................. 100

Cruise control ............................. 102

Object detection systems ........... 105

Fuel ............................................ 107

Towing ....................................... 110

Driving hints

Control of the vehicle

Never coast with engine not running

Many systems will not function in this
situation (e.g. brake servo unit, power
steering). Driving in this manner is a
danger to yourself and others.

Pedals

To ensure the pedal travel is
uninhibited, there must be no mats in
the area of the pedals.

Power steering

Never leave the steering wheel on full
lock when the vehicle is stationary as
this may damage the power steering
pump.

Starting and operating

New vehicle running-in

Do not brake unnecessarily hard for
the first few journeys and after new
disc brake pads have been fitted.

During the first drive, smoke may
occur because of wax and oil
evaporating off the exhaust system.
Park the vehicle in the open for a
while after the first drive and avoid
inhaling the fumes.

During the running-in period fuel and
engine oil consumption may be
higher and the cleaning process of
the diesel particle filter may take
place more often.

Diesel particle filter 3 93.

92 Driving and operating

Ignition switch positions

St = Ignition off
A = Steering wheel lock released,

ignition off

M = Ignition on. Diesel engines:

preheating

D = Starting

Starting the engine

Manual transmission: operate clutch.
Manual transmission automated:

operate brake; transmission
automatically shifts to N.

Do not accelerate.
Diesel engines: turn the key to

position M for preheating until control
indicator ! extinguishes from the
Driver Information Centre.

Turn key to position D and release.

The increased engine speed
automatically returns to normal idling
speed as the engine temperature
rises.

Start attempts should not last longer
than 15 seconds. If engine does not
start, wait 15 seconds before
repeating starting procedure. If
necessary, depress accelerator
before repeating starting procedure.

Before restarting or to switch off the
engine, turn key back to St.

Overrun cut-off

The fuel supply is automatically cut off
during overrun, i.e. when the vehicle
is driven with a gear engaged but
accelerator is released.

Parking

■ Do not park the vehicle on an easily
ignitable surface. The high
temperature of the exhaust system
could ignite the surface.

■ Always apply parking brake without
pressing release button. Apply as
firmly as possible on a downhill or

Driving and operating 93

uphill slopes. Operate the foot
brake at the same time to reduce
operating force.

■ Switch off the engine and ignition.
Turn the steering wheel until the
steering wheel lock is felt to
engage.

■ If the vehicle is on a level surface or
uphill slope, engage first gear
before switching off the ignition. On
an uphill slope, turn the front
wheels away from the kerb.

If the vehicle is on a downhill slope,
engage reverse gear before
switching off the ignition. Turn the
front wheels towards the kerb.

■ Lock the vehicle and activate the
anti-theft locking and anti-theft
alarm systems.

Engine exhaust

9 Danger

Engine exhaust gases contain
poisonous carbon monoxide,
which is colourless and odourless
and could be fatal if inhaled.

If exhaust gases enter the interior
of the vehicle, open the windows.
Have the cause of the fault
rectified by a workshop.

Avoid driving with an open load
compartment, otherwise exhaust
gases could enter the vehicle.

Diesel particle filter

The diesel particle filter system filters
harmful soot particles out of the
exhaust gases. The system includes
a self-cleaning function that runs
automatically during driving without
any notification. The filter is cleaned
by periodically burning off the soot
particles at high temperature. This

process takes place automatically
and the emission of smells and
smoke during this process is normal.

If cleaning of the filter is required and
automatic cleaning does not occur, it
will be indicated by the illumination of
control indicator A and 8 in the
instrument cluster. Seek the
assistance of a workshop
immediately.

Catalytic converter

The catalytic converter reduces the
amount of harmful substances in the
exhaust gases.

Caution

Fuel grades other than those listed
on pages 3 107, 3 149 could
damage the catalytic converter or
electronic components.

Unburnt petrol will overheat and
damage the catalytic converter.
Therefore avoid excessive use of

94 Driving and operating

the starter, running the fuel tank
dry and starting the engine by
pushing or towing.

In the event of misfiring, uneven
engine running, a reduction in engine
performance or other unusual
problems, have the cause of the fault
rectified by a workshop as soon as
possible. In an emergency, driving
can be continued for a short period,
keeping vehicle speed and engine
speed low.

If control indicator Z flashes, the
permitted emission limits may be
exceeded. Lift your foot off the
accelerator until Z stops flashing and
is steadily illuminated. Contact a
workshop immediately.

Malfunction indicator light 3 69

Manual transmission

To engage reverse, with the vehicle
stationary depress the clutch pedal,
pull up the collar on the selector lever
and engage the gear against the
resistance.

If the gear does not engage, set the
lever in neutral, release the clutch
pedal and depress again; then repeat
gear selection.

Do not grind the clutch unnecessarily.
When operating, depress the clutch

pedal completely. Do not use the
pedal as a foot rest.

Caution

It is inadvisable to drive with hand
resting on the selector lever.

Driving and operating 95

Manual transmission automated

This transmission permits manual
(manual mode) or automatic gear
shifting (automatic mode), both with
automatic clutch control.

Transmission display

Shows the mode and current gear.

Starting the engine

Depress the foot brake when starting
the engine. If the foot brake is not
depressed, T illuminates in the
transmission display and the engine
cannot be started.

When the foot brake is depressed, the
transmission automatically shifts to
N (neutral); "N" appears in the
transmission display and the engine
can be started. There may be a slight
delay.

Selector lever

Always move the selector lever in the
appropriate direction as far as it will
go. Upon release, it automatically
returns to the centre position.

N = Neutral.
A/M= Switch between automatic

and manual mode.
The transmission display

shows "A" when in automatic
mode.

R = Reverse gear.

Engage only when vehicle is
stationary. The transmission
display shows "R" when
reverse gear is engaged.

+ = Shift to a higher gear.

- = Shift to a lower gear.

Starting off

When the engine is started, the
transmission is in automatic mode.
Depress the foot brake and move the
selector lever towards + to engage
first gear. If R is selected,
reverse gear is engaged. The vehicle
starts to move when the foot brake is

96 Driving and operating

released. To start off quickly, release
the foot brake and accelerate
immediately after engaging a gear.

In automatic mode the transmission
shifts to other gears automatically,
dependent on driving conditions.

To engage manual mode, move the
selector lever towards A/M. The
current gear will appear in the
transmission display. To engage
first gear, depress foot brake and
move selector lever towards + or -.
Shift to a higher or lower gear by
moving selector lever to + or -. Gears
can be skipped by moving the
selector lever repeatedly at short
intervals.

Stopping the vehicle

In automatic or manual mode,
first gear is engaged and the clutch is
released when the vehicle is stopped.
In R, reverse gear remains engaged.

When stopping on gradients, engage
parking brake or depress the foot
brake. To prevent overheating of the
clutch, an intermittent audible

warning may sound as a signal to
depress the foot brake or apply the
parking brake.

Switch off engine if stopping for a
lengthy period, e.g. in traffic jams.

When the vehicle is parked and the
driver's door is opened, a warning
chime will sound if neutral is not
selected or the foot brake has not
been depressed.

Engine braking

Automatic mode
When driving downhill, the manual
transmission automated does not
shift into higher gears until a fairly
high engine speed has been reached.
It shifts down in good time when
braking.

Manual mode
To utilise the engine braking effect,
select a lower gear in good time when
driving downhill.

Rocking the vehicle

Rocking the vehicle is only
permissible if the vehicle is stuck in
sand, mud, snow or a hole. Move the
selector lever between R and A/M (or
between + and -) in a repeat pattern,
while applying light pressure to the
accelerator pedal. Do not race the
engine and avoid sudden
acceleration.

Parking

Apply the parking brake. The most
recently engaged gear (see
transmission display) remains
engaged. With N, no gear is engaged.

When the ignition is switched off, the
transmission no longer responds to
movement of the selector lever.

Manual mode

If a higher gear is selected when the
engine speed is too low, or a lower
gear when the speed is too high, the
shift is not executed. This prevents
the engine from running at too low or
too high an engine speed.

Driving and operating 97

If engine speed is too low, the
transmission automatically shifts to a
lower gear.

If engine speed is too high, the
transmission only switches to a higher
gear via kickdown.

Electronic driving programmes

Winter mode V

Activate the Winter mode if you have
problems starting off on a slippery
road surface.

Activation
Press the V button. V is shown in the

transmission display. The
transmission switches to automatic
mode and the vehicle starts off in a
suitable gear.

Deactivation
The Winter mode is switched off by:

■

pressing the V button again,

■ turning off the ignition,

■ switching to manual mode.
In order to protect the transmission at

extremely high clutch temperatures,
an intermittent audible warning may
sound. In such cases, depress the
foot brake, select "N" and apply the
parking brake to allow the clutch to
cool down.

Laden mode kg

It is possible to use the Laden mode
in both manual and automatic modes.
In both cases, the gear shifting
patterns are adapted automatically
for carrying an increased payload.

Activation
Press the kg button. kg is shown in the
transmission display. The
transmission will then select
optimized gear shift patterns.

98 Driving and operating

Deactivation
The Laden mode is switched off by:

■ pressing the kg button again,

■ turning off the ignition.

Kickdown

If the accelerator pedal is pressed
past the pressure point, the
transmission shifts to a lower gear
depending on engine speed. Full
engine power is available for
acceleration.

If engine speed is too high the
transmission switches to a higher
gear, even in manual mode. Without
kickdown this automatic shift is not
effected in manual mode.

Fault

In the event of a fault, W is shown in
the transmission display. Continued
driving is possible provided the
vehicle is driven with care and
anticipation.

Have the cause of the fault remedied
by a workshop.

Interruption of power supply

The clutch is not disengaged if there
is an interruption of the power supply
when a gear is engaged. The vehicle
cannot move.

If the battery is discharged, start the
vehicle using jump leads 3 135.

If the cause of the fault is not a
discharged battery, seek the
assistance of a workshop.

If neutral cannot be selected, the
vehicle must only be towed with the
drive wheels raised off the ground.

Towing the vehicle 3 138.

Brakes

The brake system comprises two
independent brake circuits.

If a brake circuit fails, the vehicle can
still be braked using the other brake
circuit. However, braking effect is
achieved only when you depress the
brake pedal firmly. You need to use
considerably more force for this. The
braking distance is extended. Seek
the assistance of a workshop before
continuing your journey.

When the engine is not running, the
support of the brake servo unit
disappears once the brake pedal has
been depressed once or twice.
Braking effect is not reduced, but
braking requires significantly greater
force. It is especially important to bear
this in mind when being towed.

If control indicator R illuminates in
the instrument cluster while driving
and the message BRAKING FAULT
appears in the Driver Information
Centre there is a fault in the braking
system. Seek the assistance of a
workshop immediately.

Driving and operating 99

Control indicator R 3 69.
Vehicle messages 3 73.

Antilock brake system

Antilock brake system (ABS)
prevents the wheels from locking.

ABS starts to regulate brake pressure
as soon as a wheel shows a tendency
to lock. The vehicle remains
steerable, even during hard braking.

ABS control is made apparent
through a pulse in the brake pedal
and the noise of the regulation
process.

For optimum braking, keep the brake
pedal fully depressed throughout the
braking process, despite the fact that
the pedal is pulsating. Do not reduce
the pressure on the pedal.

Control indicator u 3 70.

Fault

If control indicator u does not go out
a few seconds after the ignition is
switched on, or if it illuminates while
driving, there is a fault in the ABS.
Control indicator A may also

illuminate in the instrument cluster
together with the messages CHECK
ABS and CHECK ESP in the Driver
Information Centre. The brake
system remains operational but
without ABS regulation.

9 Warning

If there is a fault in the ABS, the
wheels may be liable to lock due
to braking that is heavier than
normal. The advantages of ABS
are no longer available. During
hard braking, the vehicle can no
longer be steered and may
swerve.

If control indicators u, A, R and
C illuminate, the ABS and ESP are
deactivated and the message
BRAKING FAULT is shown in the
Driver Information Centre. Seek the
assistance of a workshop.

Have the cause of the fault remedied
by a workshop.

Vehicle messages 3 73.

Parking brake

Always apply parking brake firmly
without operating the release button,
and apply as firmly as possible on a
downhill or uphill slope.

To release the parking brake, pull the
lever up slightly, press the release
button and fully lower the lever.

To reduce the operating forces of the
parking brake, depress the foot brake
at the same time.

Control indicator R 3 69.