Vauxhall Corsa 2014 User Manual

Owner’s Manual
Model Year 2014.5
Edition: December 2013

KTA-2656/13-VX-en

0 - 1Owner’s Manual Model Year 2014.5 Edition: December 2013 KTA-2656/13-VX-en

VAUXHALL Corsa

Contents

Introduction .................................... 2

In brief ............................................ 6

Keys, doors and windows ............ 19

Seats, restraints ........................... 34

Storage ........................................ 53

Instruments and controls ............. 70

Lighting ........................................ 98

Climate control ........................... 106

Driving and operating ................. 114

Vehicle care ............................... 145

Service and maintenance .......... 194

Technical data ........................... 197

Customer information ................ 222

Index .......................................... 224

2 Introduction

Introduction

Introduction 3

Vehicle specific data

Please enter your vehicle's data on
the previous page to keep it easily
accessible. This information is
available under the sections "Service
and Maintenance" and "Technical
data" as well as on the identification
plate.

Introduction

Your vehicle is a designed
combination of advanced technology,
safety, environmental friendliness
and economy.

This Owner's Manual provides you
with all the necessary information to
enable you to drive your vehicle
safely and efficiently.

Make sure your passengers are
aware of the possible risk of accident
and injury which may result from
improper use of the vehicle.

You must always comply with the
specific laws and regulations of the
country that you are in. These laws
may differ from the information in this
Owner's Manual.

When this Owner's Manual refers to a
workshop visit, we recommend your
Vauxhall Authorised Repairer. For
gas vehicles, we recommend a
Vauxhall Authorised Repairer
licensed to service gas vehicles.

All Vauxhall Authorised Repairers
provide first-class service at
reasonable prices. Experienced
mechanics trained by Vauxhall work
according to specific Vauxhall
instructions.

The customer literature pack should
always be kept ready to hand in the
vehicle.

Using this manual

■ This manual describes all options
and features available for this
model. Certain descriptions,
including those for display and
menu functions, may not apply to
your vehicle due to model variant,
country specifications, special
equipment or accessories.

■ The "In brief" section will give you
an initial overview.

■ The table of contents at the
beginning of this manual and within
each section shows where the
information is located.

■ The index will enable you to search
for specific information.

■ This Owner's Manual depicts left­hand drive vehicles. Operation is
similar for right-hand drive vehicles.

■ The Owner's Manual uses the
factory engine designations. The
corresponding sales designations
can be found in the section
"Technical data".

■ Directional data, e.g. left or right, or
front or back, always relate to the
direction of travel.

■ The vehicle display screens may
not support your specific language.

■ In this manual all display messages
and interior labellings are written in
bold type.

4 Introduction

Danger, Warnings and
Cautions

9 Danger

Text marked 9 Danger provides
information on risk of fatal injury.
Disregarding this information may
endanger life.

9 Warning

Text marked 9 Warning provides
information on risk of accident or
injury. Disregarding this
information may lead to injury.

Caution

Text marked Caution provides
information on possible damage to
the vehicle. Disregarding this
information may lead to vehicle
damage.

Symbols

Page references are indicated with 3.
3 means "see page".

Thank you for choosing a Vauxhall.
We wish you many hours of

pleasurable driving.
Your Vauxhall Team

Introduction 5

6 In brief

In brief

Initial drive information

Vehicle unlocking

Turn the key in the driver's door lock
to the front or press button q to
unlock the doors and load
compartment. Open the doors by
pulling the handles. To open the
tailgate, pull the button under the
tailgate moulding.

Radio remote control 3 20, Central
locking system 3 21, Load
compartment 3 24.

Seat adjustment

Seat positioning

Pull handle, slide seat, release
handle.

Seat adjustment 3 36, Seat position
3 35.

9 Danger

Do not sit nearer than 25 cm from
the steering wheel, to permit safe
airbag deployment.

In brief 7

Seat backrests

Turn handwheel. Do not lean on seat
when adjusting.

Seat adjustment 3 36, Seat position
3 35, Folding front passenger seat
backrest 3 37.

Seat height

Lever pumping motion
up = higher

down = lower

Seats 3 36, Seat position 3 35.

Head restraint adjustment

Press release button, adjust height,
engage.

Head restraints 3 34.

8 In brief

Seat belt

Pull out the seat belt and engage in
belt buckle. The seat belt must not be
twisted and must fit close against the
body. The backrest must not be tilted
back too far (maximum approx. 25 °).

To release belt, press red button on
belt buckle.

Seat belts 3 38, Airbag system
3 41, Seat position 3 35.

Mirror adjustment

Interior mirror

Swivel the lever on the underside to
reduce dazzle.

Interior mirror 3 29, Automatic anti­dazzle interior mirror 3 29.

Exterior mirrors

Setting with four-way switch in vehicles with manual window operation

First select the relevant exterior mirror
then use the control to adjust.

In brief 9

Setting with four-way switch in vehicles with electronic window operation

First select the relevant exterior mirror
then use the control to adjust.

Electric adjustment 3 27, Convex
exterior mirrors 3 27, Folding
exterior mirrors 3 27, Heated
exterior mirrors 3 28.

Steering wheel adjustment

Unlock lever, adjust steering wheel,
then engage lever and ensure it is
fully locked. Do not adjust steering
wheel unless vehicle is stationary and
steering wheel lock has been
released.

Airbag system 3 41, Ignition
positions 3 115.

10 In brief

Instrument panel overview

In brief 11

1 Side air vents ...................... 112

2 Light switch .......................... 98

Instrument illumination ....... 103

Rear fog light ....................... 102

Front fog lights ................... 102

Headlight range

adjustment ........................... 99

3 Turn and lane-change

signals, headlight flash,
low beam and high beam ... 101

Exit lighting .......................... 105

Parking lights ...................... 102

Cruise control ....................... 85

4 Steering wheel controls ........70

5 Horn ...................................... 71

Driver airbag ......................... 44

6 Instruments .......................... 76

7 Windscreen wiper,

windscreen washer system ...72

Trip computer ........................ 91

8 Centre air vents ................... 112

9 Info-Display ........................... 86

Trip computer ........................ 91

Electronic climate control

system ................................. 109

10 Left heated seat .................... 38

Heated steering wheel .......... 71

Tyre deflation detection

system ................................. 175

Parking assist ...................... 132

Hazard warning flashers .....101

Central locking system .......... 21

Electronic stability program . 130

Airbag deactivation ............... 46

Right heated seat .................. 38

Eco button ........................... 116

Fuel selector ........................ 77

11 Front passenger airbag ......... 44

12 Glovebox .............................. 53

13 Climate control system ........ 106

14 Cigarette lighter ..................... 75

Power outlet .......................... 75

15 Ashtray .................................. 75

16 Ignition switch with

steering wheel lock ............. 115

17 Accelerator pedal ................ 115

18 Brake pedal ......................... 128

19 Clutch pedal ........................ 114

20 Steering wheel adjustment ...70

21 Bonnet release lever ........... 147

12 In brief

Exterior lighting

Turn light switch
AUTO = Automatic light control:

Exterior lighting is
switched on and off

m

8
9

Press switch

>
r

automatically

= Activation or deactivation

of the automatic light

control
= sidelights
= low beam

= Front fog lights
= Rear fog light

Lighting 3 98.

Headlight flash, high beam and low beam

headlight flash = pull lever
high beam = push lever
low beam = push or pull lever

High beam 3 99, Headlight flash

3 99, Automatic light control
3 98.

In brief 13

Turn and lane-change signals

right = lever up
left = lever down

Turn and lane-change signals
3 101, Parking lights 3 102.

Hazard warning flashers

Operated with the ¨ button.
Hazard warning flashers 3 101.

Horn

Press j.

14 In brief

Washer and wiper systems

Windscreen wiper

= fast

&

= slow

%

= timed interval wipe or

$

automatic wiping with rain
sensor

= off

§

For a single wipe when the
windscreen wiper is off, press the
lever down.

Windscreen wiper 3 72, Wiper
blade replacement 3 152.

Windscreen and headlight washer systems

Pull lever.
Windscreen and headlight washer

system 3 72, Washer fluid 3 149.

Rear window wiper and washer system

Wiper on = push lever
Wiper off = push lever again
Wash = push lever and hold

Rear window wiper and washer
system 3 73, Wiper blade
replacement 3 152, Washer fluid
3 149.

In brief 15

Climate control

Heated rear window, heated exterior mirrors

Heating is operated by pressing the
Ü button.

Heated rear window 3 31.

Demisting and defrosting the windows

Air distribution to l.
Set temperature control to warmest

level.
Set fan speed to highest level.
Cooling n on.
Press button V.
Climate control system 3 106.

Transmission

Manual transmission

Reverse: with the vehicle stationary,
wait 3 seconds after depressing
clutch pedal and then press the
release button on the selector lever
and engage the gear.

If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.

Manual transmission 3 123.

16 In brief

Manual transmission automated

N = neutral position

= drive position

o

+ = higher gear

- = lower gear
A = switch between automatic and

manual mode

R = reverse gear (with selector

lever lock)

Manual transmission automated
3 124.

Automatic transmission

P = park position
R = reverse gear
N = neutral position
D = drive position

The selector lever can only be moved
out of P or N when the ignition is on
and the foot brake is depressed
(selector lever lock). To engage P or
R, press the release button on the
selector lever.

The automatic transmission is
available in two versions 3 120.

Starting off

Check before starting off

■ Tyre pressure and condition 3 173,
3 217.

■ Engine oil level and fluid levels
3 148.

■ All windows, mirrors, exterior
lighting and number plates are free
from dirt, snow and ice and are
operational.

■ Proper position of mirrors, seats,
and seat belts 3 27, 3 35,
3 39.

■ Brake function at low speed,
particularly if the brakes are wet.

In brief 17

Starting the engine

■ Turn key to position 1

■ move the steering wheel slightly to
release the steering wheel lock

■ operate clutch and brake. If the
clutch pedal is not operated, the
engine might not start and the
control indicator - may illuminate

■ automatic transmission in P or N

■ do not operate accelerator pedal

■ diesel engines, turn the key to
position 2 for preheating and wait
until control indicator !
extinguishes

■ turn key to position 3 and release

Starting the engine 3 115.

Stop-start system

If the vehicle is at a low speed or at a
standstill and certain conditions are
fulfilled, activate an Autostop as
follows:

■ Depress the clutch pedal

■ shift the selector lever to neutral

■ release the clutch pedal
An Autostop is indicated by the

needle at the AUTOSTOP position in
the tachometer.

To restart the engine, depress the
clutch pedal again.

Stop-start system 3 116.

18 In brief

Parking

■ Always apply the parking brake
without pressing the release button.
Apply as firmly as possible on a
downhill slope or uphill slope.
Depress the foot brake at the same
time to reduce operating force.

■ Switch off the engine. Turn the
ignition key to position 0 and
remove it. Turn the steering wheel
until the steering wheel lock is felt
to engage.

For vehicles with automatic
transmission, the key can only be
removed when the selector lever is
in the P position.

■ If the vehicle is on a level surface or
uphill slope, engage first gear or set
the selector lever to P before
switching off the ignition. On an
uphill slope, turn the front wheels
away from the kerb.

If the vehicle is on a downhill slope,
engage reverse gear or set the
selector lever to P before switching
off the ignition. Turn the front
wheels towards the kerb.

■ Lock the vehicle with button p on
the radio remote control.

■ Activate the anti-theft alarm system
3 25.

■ Do not park the vehicle on an easily
ignitable surface. The high
temperature of the exhaust system
could ignite the surface.

■ Close windows and sunroof.

■ The engine cooling fans may run
after the engine has been switched
off 3 146.

■ After running at high engine speeds
or with high engine loads, operate
the engine briefly at a low load or
run in neutral for approx.
30 seconds before switching off, in
order to protect the turbocharger.

Keys, locks 3 19.
Laying the vehicle up for a long period

of time 3 145.

Keys, doors and windows 19

Keys, doors and windows

Keys, locks ................................... 19

Doors ........................................... 24

Vehicle security ............................ 25

Exterior mirrors ............................ 27

Interior mirrors ............................. 29

Windows ...................................... 29

Roof ............................................. 32

Keys, locks

Keys

Replacement keys

The key number is specified in the
Car Pass or on a detachable tag.

The key number must be quoted
when ordering replacement keys as it
is a component of the immobiliser
system.

Locks 3 191.
The code number of the key adapter

for the locking wheel bolts is specified
on a card. It must be quoted when
ordering a replacement key adapter.

Wheel changing 3 183.

Lock cylinders

Designed to free-wheel if they are
forcefully rotated without the correct
key or if the correct key is not fully
inserted. To reset, turn cylinder with
the correct key until its slot is vertical,
remove key and then re-insert it. If the
cylinder still free-wheels, turn the key
through 180° and repeat operation.

Key with foldaway key section

Press button to extend. To fold the
key, first press the button.

Car Pass

The Car Pass contains security
related vehicle data and should
therefore be kept in a safe place.

When the vehicle is taken to a
workshop, this data is needed in order
to perform certain operations.

20 Keys, doors and windows

Radio remote control

Used to operate:

■ Central locking system,

■ Anti-theft locking system,

■ Anti-theft alarm system,

■ Power windows.
The radio remote control has a range

of approx. 5 metres. This range can
be affected by outside influences.
The hazard warning flashers confirm
operation.

Handle with care, protect from
moisture and high temperatures and
avoid unnecessary operation.

Fault

If the central locking system cannot
be operated with the radio remote
control, it may be due to the following:

■ Range exceeded,

■ Battery voltage too low,

■ Frequent, repeated operation of the
radio remote control while not in
range, which will require re­synchronisation,

■ Overload of the central locking
system by operating at frequent
intervals, the power supply is
interrupted for a short time,

■ Interference from higher-power
radio waves from other sources.

Unlocking 3 21.

Radio remote control battery replacement

Replace the battery as soon as the
range is noticeably diminished.

Batteries do not belong in household
waste. They must be disposed of at
an appropriate recycling collection
point.

Key with foldaway key section

Keys, doors and windows 21

Extend the key and open the unit.
Replace the battery (battery type
CR 2032), paying attention to the
installation position. Close the unit
and synchronise.

Key with fixed key section
Have the battery replaced by a
workshop.

Radio remote control synchronisation

After replacing the battery, unlock the
door with the key in the driver's door
lock. The radio remote control will be
synchronised when you switch on the
ignition.

Memorised settings

Whenever the vehicle is locked, the
following settings are automatically
memorised by the key being used:

■ Electronic climate control,

■ Info-Display,

■ Infotainment system,

■ Instrument panel illumination.

The saved settings are automatically
used the next time that key is used to
unlock the vehicle.

Central locking system

Unlocks and locks doors, load
compartment and fuel filler flap.

A pull on an interior door handle
unlocks the entire vehicle and opens
the door.

Note
In the event of an accident of a
certain severity, the vehicle unlocks
automatically.

Note
A short time after unlocking with the
remote control the doors are locked
automatically if no door has been
opened.

Unlocking

Central locking system with key activation

Turn the key in the driver's door lock
to the front.

22 Keys, doors and windows

Central locking system with radio remote control

Press button q.
Two settings are possible:

■ To unlock only the driver's door:
Press button q once. To unlock the
entire vehicle: Press button q
twice.

■ To unlock the entire vehicle: Press
button q once.

Settings can be changed in the Driver
Information Centre.

Vehicle personalisation 3 95.

Locking

Close doors, load compartment and
fuel filler flap. If the driver's door is not
closed properly, the central locking
system will not work.

Central locking system with key activation

Turn the key in the driver's door lock
rearwards.

Central locking system with radio remote control

Press button p.

Keys, doors and windows 23

Central locking button

Press button m: the doors are locked
or unlocked.

The LED in the button m illuminates
for approx. 2 minutes after locking
with the radio remote control.

If the doors are locked from the inside
whilst driving, the LED remains
illuminated.

Fault in radio remote control

Unlocking

Turn the key in the driver's door lock
as far as it will go. The entire vehicle
is unlocked when the driver's door is
opened. To unlock the other doors,
switch on the ignition and press the
central locking button.

Locking
Close the driver's door, open the
passenger door, then press central
locking button m. The vehicle is
locked. Close the passenger door.

Fault in central locking system

Unlocking
Turn the key in the driver's door lock
as far as it will go. The other doors can
be opened by pulling the interior
handle (not possible if the anti-theft
locking system is active). The load
compartment and fuel filler flap
remain locked. To deactivate the anti­theft locking system, switch on the
ignition 3 25.

Locking

24 Keys, doors and windows

Insert the key into the opening above
the lock on the inside of the door and
operate the lock by lifting until it clicks.
Then close the door. The procedure
must be carried out for each door. The
driver's door can also be locked from
the outside with the key. The fuel filler
flap and tailgate cannot be locked.

Automatic locking

This security feature can be
configured to automatically lock all
doors, load compartment and fuel
filler flap as soon as the vehicle is
driven. Vehicle personalisation
3 95.

Child locks

9 Warning

Use the child locks whenever
children are occupying the rear
seats.

Using a key or suitable screwdriver,
turn button on rear door lock to the
horizontal position. The door cannot
be opened from inside.

Doors

Load compartment

Opening

After unlocking, push the button
below the handle and open the
tailgate.

9 Danger

Do not drive with the tailgate open
or ajar, e.g. when transporting
bulky objects, since toxic exhaust
gases, which cannot be seen or

Keys, doors and windows 25

smelled, could enter the vehicle.
This can cause unconsciousness
and even death.

Note
The installation of certain heavy
accessories onto the tailgate may
affect its ability to remain open.

Closing

Use the interior handle.
Do not press the button under the

moulding while closing as this will
unlock the tailgate again.

Vehicle security

Anti-theft locking system

9 Warning

Do not use the system if there are
people in the vehicle! The doors
cannot be unlocked from the
inside.

The system deadlocks all the doors.
All doors must be closed or the
system cannot be activated.

If the ignition was on, the driver's door
must be opened and closed once so
that the vehicle can be secured.

Unlocking the vehicle disables the
mechanical anti-theft locking system.
This is not possible with the central
locking button.

Activating with the remote control

Press button p again within
10 seconds of locking.

Anti-theft alarm system

The anti-theft alarm system is
operated in conjunction with the
central locking system.

It monitors:

■ Doors, load compartment, bonnet,

■ Ignition.
Unlocking the vehicle deactivates the

anti-theft alarm system.

26 Keys, doors and windows

Light-emitting diode (LED)

During the first 10 seconds of anti­theft alarm system activation:

LED illu‐
minates
LED
flashes
quickly

After the first 10 seconds of anti-theft
alarm system activation:

LED flashes
slowly

Seek the assistance of a workshop in
the event of faults.

= Test, ignition delay,

= Door, load

compartment or bonnet
open, or system fault.

= System active.

Alarm

When triggered, the alarm gives off
an acoustic signal (horn) and a visual
signal (hazard warning flashers). The
number and duration of which are
stipulated by legislation.

The alarm siren can be silenced by
pressing any button of the radio
remote control or by switching on the
ignition. The anti-theft alarm system is
deactivated at the same time.

If the vehicle's battery is to be
disconnected (e.g. for maintenance
work), the alarm siren must be
deactivated as follows: switch the
ignition on then off, then disconnect
the vehicle's battery within
15 seconds.

Immobiliser

The system checks whether the
vehicle is allowed to start with the key
being used. If the transponder in the
key is recognised, the engine can be
started.

The immobiliser activates itself
automatically after the key has been
removed from the ignition switch.

If control indicator A flashes when
the ignition is on, there is a fault in the
system; the engine cannot be started.
Switch off the ignition and then repeat
the start attempt.

If control indicator A continues
flashing, attempt to start the engine
using the spare key and seek the
assistance of a workshop.

If control indicator A illuminates after
the engine has started, there is a fault
in the engine electronics or
transmission electronics 3 81,
3 122, 3 127, or there is water in the
diesel fuel filter 3 90.

Note
The immobiliser does not lock the
doors. You should always lock the
vehicle after leaving it and switch on
the anti-theft alarm system 3 21,
3 25.

Keys, doors and windows 27

Exterior mirrors

Convex shape

The convex exterior mirror contains
an aspherical area and reduces blind
spots. The shape of the mirror makes
objects appear smaller, which will
affect the ability to estimate
distances.

Electric adjustment

Setting with four-way switch in vehicles with manual window operation

First select the relevant exterior mirror
then use the control to adjust.

Setting with four-way switch in vehicles with electronic window operation

First select the relevant exterior mirror
then use the control to adjust.

Folding mirrors

For pedestrian safety, the exterior
mirrors will swing out of their normal
mounting position if they are struck
with sufficient force. Reposition the
mirror by applying slight pressure to
the mirror housing.

28 Keys, doors and windows

Corsa VXR: For pedestrians safety,
the exterior mirrors of the Corsa VXR
are released from the holder if they
are struck with sufficient force. Fit
mirror housing to holder with latching
lugs and engage by striking gently.

Manual

The exterior mirrors can be folded in
by pressing gently on the outer edge
of the housing.

Heated mirrors

Operated by pressing the Ü button.
Heating works with the engine

running. It is switched off
automatically after a short time.

Keys, doors and windows 29

Interior mirrors

Manual anti-dazzle

To reduce dazzle, adjust the lever on
the underside of the mirror housing.

Automatic anti-dazzle

Dazzle from following vehicles at
night is automatically reduced.

Windows

Windscreen

Heat-reflecting windscreen

The heat-reflecting windscreen has a
coating which reflects solar radiation.
Also data signals, e.g. from toll
stations, might be reflected.

The marked areas on the windscreen
are not covered with the coating.
Devices for electronic data recording
and fee payment must be attached in
these areas. Otherwise data
recording malfunctions may occur.

30 Keys, doors and windows

Windscreen stickers

Do not attach stickers such as toll
road stickers or similar on the
windscreen in the area of the interior
mirror. Otherwise the detection zone
of the sensor and the view area of the
camera in the mirror housing could be
restricted.

Manual windows

The door windows can be opened or
closed with the window winders.

Power windows

9 Warning

Take care when operating the
power windows. Risk of injury,
particularly to children.

Keep a close watch on the
windows when closing them.
Ensure that nothing becomes
trapped in them as they move.

Power windows can be operated:

■ with the ignition on,

■ within 5 minutes of switching the
ignition off,

■ within 5 minutes of turning the
ignition key to position 1.

After switching off the ignition, the
window operation is disabled when
the driver's door is opened, then
closed and locked.

Operate the control to open or close
the window.

For vehicles with automatic feature,
pull or press the switch again to stop
window movement.

Safety function

If the window glass encounters
resistance during automatic closing, it
is immediately stopped and opened
again.

In the event of closing difficulties due
to frost or the like, operate the switch
several times to close the window in
stages.

Keys, doors and windows 31

Operating windows from outside

Depending on the equipment level,
the windows can be operated
remotely from outside the vehicle.

Press q or p until all windows have
opened or closed.

Overload

If the windows are repeatedly
operated at short intervals, the
window operation is disabled for
some time.

Fault

If the windows cannot be opened or
closed automatically, activate the
window electronics as follows:

1. Close doors.

2. Switch on ignition.

3. Close the window completely and
operate the button for
5 more seconds.

4. Open the window completely and
operate the button for
1 more second.

5. Repeat this for each window.

Heated rear window

Operated by pressing the Ü button.
Heating functions with the engine

running and is switched off
automatically after a short time.

Depending on the engine type, the
heated rear window comes on
automatically when the diesel particle
filter is being cleaned.

Sun visors

The sun visors can be folded down or
swivelled to the side to prevent
dazzling.

32 Keys, doors and windows

If the sun visors have integral mirrors,
the mirror covers should be closed
when driving.

Roof

Sunroof

9 Warning

Take care when operating the
sunroof. Risk of injury, particularly
to children.

Keep a close watch on the
movable parts when operating
them. Ensure that nothing
becomes trapped in them as they
move.

Sunroof can be operated with ignition
on.

Operated via a rocker switch in the
roof console.

Press the button briefly for activation
in steps. Hold down the button for
longer for automatic opening.

Raise

With the sunroof closed, press ü.
The sunroof is raised at the rear.

Open

Press ü again with the sunroof in the
raised position. The sunroof opens
automatically until it reaches its end
position.

To close: press d.

Keys, doors and windows 33

Caution

When using a roof rack, check the
free movement of the sunroof in
order to avoid damage. It is only
permitted to raise the sunroof.

Note
If the top of the roof is wet, tilt
sunroof, allow water to run off and
then open sunroof.

Do not affix any stickers to sunroof.

Close

Hold down d until the sunroof is
completely closed.

Sunblind

The sunblind is manually operated.
Close or open the sunblind by sliding.

When the sunroof is open, the
sunblind is always open.

Overload

If the system is overloaded, the power
supply is automatically cut-off for a
short time. The system is protected by
fuses in the fuse box 3 166.

Initialising the sun roof

If the sunroof cannot be operated,
activate the electronics as follows:
with ignition on, close the sunroof and
hold d depressed for at least
10 seconds.

Seek the assistance of a workshop to
have the cause of the fault remedied.

34 Seats, restraints

Seats, restraints

Head restraints ............................ 34

Front seats ................................... 35

Seat belts ..................................... 38

Airbag system .............................. 41

Child restraints ............................. 48

Head restraints

Position

9 Warning

Only drive with the head restraint
set to the proper position.

The upper edge of the head restraint
should be at upper head level. If this
is not possible for extremely tall
people, set to highest position, and
set to lowest position for small people.

Adjustment

Head restraints on front seats

Press release button, adjust height,
engage.

Seats, restraints 35

Head restraints on rear seats

The height of the head restraints can
be set in two positions.

To set to the first position, pull the
head restraint upwards. To set to the
second position press the spring
marked in the illustration and push the
head restraint right up to the top.

To adjust downwards, press the
spring marked in the illustration and
push the head restraint downwards.

Active head restraints

In the event of a rear-end impact, the
active head restraints tilt slightly
forwards. The head is more
effectively supported so the risk of
whiplash injury is reduced.

Note
Approved accessories may only be
attached to the front passenger seat
head restraint if the seat is not in use.

Front seats

Seat position

9 Warning

Only drive with the seat correctly
adjusted.

Sit with buttocks as far back against

■
the backrest as possible. Adjust the
distance between the seat and the
pedals so that legs are slightly
angled when pressing the pedals.
Slide the front passenger seat as
far back as possible.

36 Seats, restraints

■ Sit with shoulders as far back
against the backrest as possible.
Set the backrest to an angle so that
it is possible to reach the steering
wheel with arms slightly bent.
Maintain contact between
shoulders and the backrest when
turning the steering wheel. Do not
tilt the backrest too far back. We
recommend a maximum angle of
approx. 25°.

■ Adjust the steering wheel 3 70.

■ Set the seat high enough to have a
clear field of vision on all sides and
on all display instruments. There
should be at least one hand of
clearance between head and the
roof frame. Thighs should rest
lightly on the seat without pressing
into it.

■ Adjust the head restraint 3 34.

■ Adjust the height of the seat belt
3 39.

Seat adjustment

9 Danger

Do not sit nearer than 25 cm from
the steering wheel, to permit safe
airbag deployment.

9 Warning

Never adjust seats while driving as
they could move uncontrollably.

Seat positioning

Pull handle, slide seat, release
handle.

Seat backrests

Turn handwheel. Do not lean on
backrest when adjusting.

Seats, restraints 37

Seat height

Lever pumping motion
up = higher

down = lower

Seat folding

Lift release lever and tilt backrest
forwards. Lower release lever and
backrest engages in lowered position.
Slide seat forwards.

To return backrest to its original
upright position: Lift the release lever,
move the backrest back to upright,
lower lever, backrest engages.

Folding the backrest forwards is
possible only when the backrest is in
an upright position.

Do not operate handwheel to adjust
backrest with backrest tilted forward.

Corsa VXR

Remove seat belt from belt mount on
backrest.

Pull release lever on rear of backrest,
tilt backrest forwards and release
lever. Slide seat forwards.

To move the backrest upright, slide
seat back, pull release lever and
move backrest upright. Release
lever, backrest engages.

Folding the backrest forwards is
possible only when the backrest is in
an upright position.

Do not operate handwheel to adjust
backrest with backrest tilted forward.

38 Seats, restraints

Heating

Activate heating by pressing ß button
for the seat with the ignition on.

LED in button ß on: relevant front
seat heating on.

Seat heating is operational when the
engine is running and during an
Autostop.

Seat belts

The belts are locked during heavy
acceleration or deceleration of the
vehicle for the safety of the
occupants.

9 Warning

Fasten seat belt before each trip.
In the event of an accident, people

not wearing seat belts endanger
their fellow occupants and
themselves.

Seat belts are designed to be used by
only one person at a time. Child
restraint system 3 48.

Periodically check all parts of the belt
system for damage, pollution and
proper functionality.

Have damaged components
replaced. After an accident, have the
belts and triggered belt tensioners
replaced by a workshop.

Note
Make sure that the belts are not
damaged by shoes or sharp-edged
objects or trapped. Prevent dirt from
getting into the belt retractors.

Seat belt reminder X 3 80.

Belt force limiters

In the front seats, stress on the body
is reduced by the gradual release of
the belt during a collision.

Seats, restraints 39

Belt tensioners

In the event of a head-on or rear-end
collision of a certain severity, the front
seat belts are tightened.

9 Warning

Incorrect handling (e.g. removal or
fitting of belts) can trigger the belt
tensioners with risk of injury.

Deployment of the belt tensioners is
indicated by illumination of control
indicator v 3 80.

Triggered belt tensioners must be
replaced by a workshop. Belt
tensioners can only be triggered
once.

Note
Do not affix or install accessories or
other objects that may interfere with
the operation of the belt tensioners.
Do not make any modifications to
belt tensioner components as this
will invalidate the vehicle type
approval.

Three-point seat belt

Fastening seat belt

Withdraw belt from retractor, guide it
untwisted across the body and insert
the latch plate in the buckle. Tension
the lap belt regularly whilst driving by
tugging the shoulder belt.

With the Corsa VXR: Feed seat belt
through belt mount on backrest when
fastening seat belt.

Loose or bulky clothing prevents the
belt from fitting snugly. Do not place
objects such as handbags or mobile
phones between the belt and your
body.

40 Seats, restraints

9 Warning

The belt must not rest against hard
or fragile objects in the pockets of
your clothing.

Height adjustment

1. Pull belt out slightly.

2. Press button.

3. Adjust height and engage audibly.

Adjust the height so that the belt lies
across the shoulder. It must not lie
across the throat or upper arm.

Do not adjust while driving.

Removing seat belt

To release belt, press red button on
belt buckle.

Seat belts on the rear outer seats

When not in use or to fold forward the
rear backrests, feed seat belts
through belt mount.

Using the seat belt while pregnant

9 Warning

The lap belt must be positioned as
low as possible across the pelvis
to prevent pressure on the
abdomen.

Seats, restraints 41

Airbag system

The airbag system consists of a
number of individual systems
depending on the scope of
equipment.

When triggered the airbags inflate
within milliseconds. They also deflate
so quickly that it is often unnoticeable
during the collision.

9 Warning

If handled improperly the airbag
systems can be triggered in an
explosive manner.

Note
The airbag systems and belt
pretensioner control electronics are
located in the centre console area.
Do not put any magnetic objects in
this area.

Do not stick anything on the airbag
covers and do not cover them with
other materials.

Each airbag is triggered only once.
Have deployed airbags replaced by
a workshop. Furthermore, it might be
necessary to have the steering
wheel, the instrument panel, parts of
the panelling, the door seals,
handles and the seats replaced.

Do not make any modifications to
the airbag system as this will
invalidate the vehicle type approval.

When the airbags inflate, escaping
hot gases may cause burns.

Control indicator v for airbag systems
3 80.

Child restraint systems on front
passenger seat with airbag
systems

Warning according to ECE R94.02:

EN: NEVER use a rearward-facing
child restraint on a seat protected by
an ACTIVE AIRBAG in front of it;
DEATH or SERIOUS INJURY to the
CHILD can occur.

DE: Nach hinten gerichtete
Kindersitze NIEMALS auf einem Sitz
verwenden, der durch einen davor
befindlichen AKTIVEN AIRBAG
geschützt ist, da dies den TOD oder
SCHWERE VERLETZUNGEN DES
KINDES zur Folge haben kann.

FR: NE JAMAIS utiliser un siège
d'enfant orienté vers l'arrière sur un
siège protégé par un COUSSIN
GONFLABLE ACTIF placé devant lui,

42 Seats, restraints

sous peine d'infliger des
BLESSURES GRAVES, voire
MORTELLES à l'ENFANT.

ES: NUNCA utilice un sistema de
retención infantil orientado hacia
atrás en un asiento protegido por un
AIRBAG FRONTAL ACTIVO. Peligro
de MUERTE o LESIONES GRAVES
para el NIÑO.

RU: ЗАПРЕЩАЕТСЯ
устанавливать детское
удерживающее устройство лицом
назад на сиденье автомобиля,
оборудованном фронтальной
подушкой безопасности, если
ПОДУШКА НЕ ОТКЛЮЧЕНА! Это
может привести к СМЕРТИ или
СЕРЬЕЗНЫМ ТРАВМАМ
РЕБЕНКА.

NL: Gebruik NOOIT een achterwaarts
gericht kinderzitje op een stoel met
een ACTIEVE AIRBAG ervoor, om
DODELIJK of ERNSTIG LETSEL van
het KIND te voorkomen.

DA: Brug ALDRIG en bagudvendt
autostol på et forsæde med AKTIV
AIRBAG, BARNET kan komme i
LIVSFARE eller komme ALVORLIGT
TIL SKADE.

SV: Använd ALDRIG en bakåtvänd
barnstol på ett säte som skyddas med
en framförvarande AKTIV AIRBAG.
DÖDSFALL eller ALLVARLIGA
SKADOR kan drabba BARNET.

FI: ÄLÄ KOSKAAN sijoita taaksepäin
suunnattua lasten turvaistuinta
istuimelle, jonka edessä on
AKTIIVINEN TURVATYYNY, LAPSI
VOI KUOLLA tai VAMMAUTUA
VAKAVASTI.

NO: Bakovervendt
barnesikringsutstyr må ALDRI brukes
på et sete med AKTIV
KOLLISJONSPUTE foran, da det kan
føre til at BARNET utsettes for
LIVSFARE og fare for ALVORLIGE
SKADER.

PT: NUNCA use um sistema de
retenção para crianças voltado para
trás num banco protegido com um
AIRBAG ACTIVO na frente do

mesmo, poderá ocorrer a PERDA DE
VIDA ou FERIMENTOS GRAVES na
CRIANÇA.

IT: Non usare mai un sistema di
sicurezza per bambini rivolto
all'indietro su un sedile protetto da
AIRBAG ATTIVO di fronte ad esso:
pericolo di MORTE o LESIONI
GRAVI per il BAMBINO!

EL: ΠΟΤΕ μη χρησιμοποιείτε παιδικό
κάθισμα ασφαλείας με φορά προς τα
πίσω σε κάθισμα που προστατεύεται
από μετωπικό ΕΝΕΡΓΟ ΑΕΡΟΣΑΚΟ,
διότι το παιδί μπορεί να υποστεί
ΘΑΝΑΣΙΜΟ ή ΣΟΒΑΡΟ
ΤΡΑΥΜΑΤΙΣΜΟ.

PL: NIE WOLNO montować fotelika
dziecięcego zwróconego tyłem do
kierunku jazdy na fotelu, przed
którym znajduje się WŁĄCZONA
PODUSZKA POWIETRZNA.
Niezastosowanie się do tego
zalecenia może być przyczyną
ŚMIERCI lub POWAŻNYCH
OBRAŻEŃ u DZIECKA.

Seats, restraints 43

TR: Arkaya bakan bir çocuk emniyet
sistemini KESİNLİKLE önünde bir
AKTİF HAVA YASTIĞI ile
korunmakta olan bir koltukta
kullanmayınız. ÇOCUK ÖLEBİLİR
veya AĞIR ŞEKİLDE
YARALANABİLİR.

UK: НІКОЛИ не використовуйте
систему безпеки для дітей, що
встановлюється обличчям назад,
на сидінні з УВІМКНЕНОЮ
ПОДУШКОЮ БЕЗПЕКИ, інакше це
може призвести до СМЕРТІ чи
СЕРЙОЗНОГО ТРАВМУВАННЯ
ДИТИНИ.

HU: SOHA ne használjon hátrafelé
néző biztonsági gyerekülést előlről
AKTÍV LÉGZSÁKKAL védett ülésen,
mert a GYERMEK HALÁLÁT vagy
KOMOLY SÉRÜLÉSÉT okozhatja.

HR: NIKADA nemojte koristiti sustav
zadržavanja za djecu okrenut prema
natrag na sjedalu s AKTIVNIM
ZRAČNIM JASTUKOM ispred njega,
to bi moglo dovesti do SMRTI ili
OZBILJNJIH OZLJEDA za DIJETE.

SL: NIKOLI ne nameščajte otroškega
varnostnega sedeža, obrnjenega v
nasprotni smeri vožnje, na sedež z
AKTIVNO ČELNO ZRAČNO
BLAZINO, saj pri tem obstaja
nevarnost RESNIH ali SMRTNIH
POŠKODB za OTROKA.

SR: NIKADA ne koristiti bezbednosni
sistem za decu u kome su deca
okrenuta unazad na sedištu sa
AKTIVNIM VAZDUŠNIM
JASTUKOM ispred sedišta zato što
DETE može da NASTRADA ili da se
TEŠKO POVREDI.

MK: НИКОГАШ не користете детско
седиште свртено наназад на
седиште заштитено со АКТИВНО
ВОЗДУШНО ПЕРНИЧЕ пред него,
затоа што детето може ДА ЗАГИНЕ
или да биде ТЕШКО ПОВРЕДЕНО.

BG: НИКОГА не използвайте
детска седалка, гледаща назад,
върху седалка, която е защитена
чрез АКТИВНА ВЪЗДУШНА
ВЪЗГЛАВНИЦА пред нея - може да
се стигне до СМЪРТ или
СЕРИОЗНО НАРАНЯВАНЕ на
ДЕТЕТО.

RO: Nu utilizaţi NICIODATĂ un scaun
pentru copil îndreptat spre partea din
spate a maşinii pe un scaun protejat
de un AIRBAG ACTIV în faţa sa;
acest lucru poate duce la DECESUL
sau VĂTĂMAREA GRAVĂ a
COPILULUI.

CS: NIKDY nepoužívejte dětský
zádržný systém instalovaný proti
směru jízdy na sedadle, které je
chráněno před sedadlem AKTIVNÍM
AIRBAGEM. Mohlo by dojít k
VÁŽNÉMU PORANĚNÍ nebo ÚMRTÍ
DÍTĚTE.

SK: NIKDY nepoužívajte detskú
sedačku otočenú vzad na sedadle
chránenom AKTÍVNYM AIRBAGOM,
pretože môže dôjsť k SMRTI alebo
VÁŽNYM ZRANENIAM DIEŤAŤA.

LT: JOKIU BŪDU nemontuokite atgal
atgręžtos vaiko tvirtinimo sistemos
sėdynėje, prieš kurią įrengta AKTYVI
ORO PAGALVĖ, nes VAIKAS GALI
ŽŪTI arba RIMTAI SUSIŽALOTI.

LV: NEKĀDĀ GADĪJUMĀ
neizmantojiet uz aizmuguri vērstu
bērnu sēdeklīti sēdvietā, kas tiek
aizsargāta ar tās priekšā uzstādītu

44 Seats, restraints

AKTĪVU DROŠĪBAS SPILVENU, jo
pretējā gadījumā BĒRNS var gūt
SMAGAS TRAUMAS vai IET BOJĀ.

ET: ÄRGE kasutage tahapoole
suunatud lapseturvaistet istmel, mille
ees on AKTIIVSE TURVAPADJAGA
kaitstud iste, sest see võib
põhjustada LAPSE SURMA või
TÕSISE VIGASTUSE.

MT: QATT tuża trażżin għat-tfal li
jħares lejn in-naħa ta’ wara fuq sit
protett b’AIRBAG ATTIV quddiemu;
dan jista’ jikkawża l-MEWT jew
ĠRIEĦI SERJI lit-TFAL.

Beyond the warning required by
ECE R94.02, for safety reasons
never use a forward-facing child
restraint system on the passenger
seat with an active front airbag.

9 Danger

Do not use a child restraint system
on the passenger seat with active
front airbag.

The airbag label is located on both
sides of the front passenger sun visor.

Airbag deactivation 3 46.

Front airbag system

The front airbag system consists of
one airbag in the steering wheel and
one in the instrument panel on the
front passenger side. These can be
identified by the word AIRBAG.

The front airbag system is triggered in
the event of an accident of a certain
severity. The ignition must be on.

The forward movement of the front
seat occupants is decelerated,
thereby considerably reducing the
risk of injury to the upper body and
head.

9 Warning

Optimum protection is only
provided when the seat is in the
proper position.

Seat position 3 35.
Keep the area in which the airbag

inflates clear of obstructions.

Seats, restraints 45

Fit the seat belt correctly and
engage securely. Only then is the
airbag able to protect.

Side airbag system

The side airbag system consists of an
airbag in each front seat backrest.
This can be identified by the word
AIRBAG.

The side airbag system is triggered in
the event of an accident of a certain
severity. The ignition must be on.

The risk of injury to the upper body
and pelvis in the event of a side-on
collision is considerably reduced.

9 Warning

Keep the area in which the airbag
inflates clear of obstructions.

Note
Only use protective seat covers that
have been approved for the vehicle.
Be careful not to cover the airbags.

Curtain airbag system

The curtain airbag system consists of
an airbag in the roof frame on each
side. This can be identified by the
word AIRBAG on the roof pillars.

The curtain airbag system is triggered
in the event of an accident of a certain
severity. The ignition must be on.

46 Seats, restraints

Airbag deactivation

Front airbag and side airbag systems
for the front passenger seat must be
deactivated if a child restraint system
is to be fitted on this seat. The curtain
airbag system, the belt tensioners
and all driver airbag systems will
remain active.

The risk of injury to the head in the
event of a side impact is considerably
reduced.

9 Warning

Keep the area in which the airbag
inflates clear of obstructions.

The hooks on the handles in the
roof frame are only suitable for
hanging up light articles of
clothing, without coat hangers. Do
not keep any items in these
clothes.

There is a warning label on the side
of the instrument panel, visible when
the front passenger door is open.

Control indicator W and LEDs in the
button not on:

Airbag systems for the front
passenger are active. No child
restraint systems can be installed.

Control indicator W and LEDs in
button on:

Front passenger airbags are
deactivated and will not inflate in the
event of a collision. A child restraint
system according to the chart Child
restraint installation locations can be
installed 3 49.

Seats, restraints 47

9 Danger

Risk of fatal injury for a child using
a child restraint system on a seat
with activated front passenger
airbag.

Risk of fatal injury for an adult
person on a seat with deactivated
front passenger airbag.

Deactivation:

■ switch on ignition, control indicator
W flashes,

■ press button W within 15 seconds
and hold down,

■ after about 2 seconds, you will hear
a confirmation buzzer. Release
button W after another 4 seconds
at the latest.

Activation:

■ switch on ignition, control indicator
W flashes,

■ press button W within 15 seconds
and hold down,

■ after approx. 2 seconds, you will
hear a confirmation buzzer.
Release button W after another
4 seconds at the latest.

The airbag systems for front
passenger seat will inflate in the event
of a collision only if control indicator
W does not illuminate.

Change status only when the vehicle
is stopped with the ignition off.

Status remains up to the next change.

Control indicator for airbag
deactivation 3 80.

Note
Starting the engine terminates
changing of the setting.

The setting can then only be
changed once the ignition has been
switched off and back on again.

48 Seats, restraints

Child restraints

Child restraint systems

We recommend the Vauxhall child
restraint system which is tailored
specifically to the vehicle.

When a child restraint system is being
used, pay attention to the following
usage and installation instructions
and also those supplied with the child
restraint system.

Always comply with local or national
regulations. In some countries, the
use of child restraint systems is
forbidden on certain seats.

9 Warning

When using a child restraint
system on the front passenger
seat, the airbag systems for the
front passenger seat must be
deactivated; if not, the triggering of
the airbags poses a risk of fatal
injury to the child.

This is especially the case if rear­facing child restraint systems are
used on the front passenger seat.

Airbag deactivation 3 46.
Airbag label 3 41.

Selecting the right system

The rear seats are the most
convenient location to fasten a child
restraint system.

Children should travel facing
rearwards in the vehicle as long as
possible. This makes sure that the
child's backbone, which is still very
weak, is under less strain in the event
of an accident.

Suitable are restraint systems that
comply with valid UN ECE
regulations. Check local laws and
regulations for mandatory use of child
restraint systems.

Ensure that the child restraint system
to be installed is compatible with the
vehicle type.

Ensure that the mounting location of
the child restraint system within the
vehicle is correct, see following
tables.

Allow children to enter and exit the
vehicle only on the side facing away
from the traffic.

When the child restraint system is not
in use, secure the seat with a seat belt
or remove it from the vehicle.

Note
Do not stick anything on the child
restraint systems and do not cover
them with any other materials.

A child restraint system which has
been subjected to stress in an
accident must be replaced.

Seats, restraints 49

Child restraint installation locations

Permissible options for fitting a child restraint system

On front passenger seat

Weight and age class

Group 0: up to 10 kg

X

1

U

or approx. 10 months

Group 0+: up to 13 kg

X

1

U

or approx. 2 years

Group I: 9 to 18 kg

X

1

U

or approx. 8 months to 4 years

Group II: 15 to 25 kg

X X U X

or approx. 3 to 7 years

Group III: 22 to 36 kg

X X U X

or approx. 6 to 12 years

1

= If the child restraint system is being secured using a three-point seat belt, move seat height adjustment to uppermost

position and ensure that vehicle seat belt runs forwards from the upper anchorage point. Adjust seat backrest

inclination as far as necessary to a vertical position to ensure that the belt is tight on the buckle side.
U = Universal suitability in conjunction with three-point seat belt.
X = No child restraint system permitted in this weight class.

On rear outboard seats On rear centre seatactivated airbag deactivated airbag

U X

U X

U X

50 Seats, restraints

Permissible options for fitting an ISOFIX child restraint system

Weight class Size class Fixture On front passenger seat

Group 0: up to 10 kg
or approx. 10 months

Group 0+: up to 13 kg
or approx. 2 years

Group I: 9 to 18 kg
or approx. 8 months to 4 years

Group II: 15 to 25 kg
or approx. 3 to 7 years

Group III: 22 to 36 kg
or approx. 6 to 12 years

E ISO/R1 IL IL X

E ISO/R1 IL IL X

D ISO/R2 X X X

C ISO/R3 X X X

D ISO/R2 X X X

C ISO/R3 X X X

B ISO/F2 IL, IUF IL, IUF X

B1 ISO/F2X IL, IUF IL, IUF X

A ISO/F3 X X X

X IL X

X IL X

On rear outboard
seats On rear centre seat

Seats, restraints 51

IL = Suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.

The ISOFIX restraint system must be approved for the specific vehicle type (Not available on the front passenger
seat in the Corsa VXR).

IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this mass group

(Not available on the front passenger seat in the Corsa VXR).

X = No ISOFIX child restraint system approved in this weight class.

ISOFIX size class and seat device

A – ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg.
B – ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
B1 – ISO/F2X = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
C – ISO/R3 = Rear-facing child restraint system for children of maximum size in the weight class up to 18 kg.
D – ISO/R2 = Rear-facing child restraint system for smaller children in the weight class up to 18 kg.
E – ISO/R1 = Rear-facing child restraint system for young children in the weight class up to 13 kg.

U = Universal suitability in conjunction with three-point seat belt.
X = No child restraint system permitted in this weight class.

52 Seats, restraints

Isofix child restraint systems

Fasten vehicle-approved ISOFIX
child restraint systems to the
mounting brackets.

When using ISOFIX mounting
brackets for seat mounting,
universally approved child restraint
systems for ISOFIX may be used.

ISOFIX mounting brackets are
indicated by a label on the backrest.

Closely follow the installation
instructions accompanying the
ISOFIX child restraint system.

Top-tether child restraint systems

Depending on country-specific
equipment, the vehicle might have
two or three fastening eyes.

Fasten Top-tether child restraint
systems to the fastening eyes on the
back of the rear seat and to the
passenger seat rail in the rear foot
well. The strap must run between the
two guide rods of the head restraint.

On the pillar trim of the rear roof and
on the attachment points are symbols
indicating the attachment eyes on
which to mount the child restraint
system.

When using Top-tether for seat
mounting, universally approved child
restraint systems for Top-tether may
be used.

Closely follow the installation
instructions accompanying the
Top-tether child restraint system.

Storage 53

Storage

Storage compartments ................ 53

Load compartment ....................... 63

Roof rack system ......................... 67

Loading information ..................... 68

Storage compartments

9 Warning

Do not store heavy or sharp
objects in the storage
compartments. Otherwise, the
storage compartment lid could
open and vehicle occupants could
be injured by objects being thrown
around in the event of hard
braking, a sudden change in
direction or an accident.

Glovebox

The glovebox features:

■ a card holder in cheque card format

■ a pen holder

■ pocket torch holder

■ a key adapter for the locking wheel
bolts

The glovebox should be closed whilst
driving.

Cupholders

A cupholder is located in the front of
the centre console.

In the 3-door passenger vehicle: also
located on the side of the rear seat.

54 Storage

Underseat storage

Lift at recessed edge and pull out.
Maximum load: 1.5 kg. To close, push
in and engage.

Rear carrier system

The rear carrier system (Flex-Fix
system) allows bicycles to be
attached to a pull-out carrier
integrated into the vehicle floor. The
transportation of other objects is not
permitted.

The maximum load of the rear carrier
system is 40 kg.The maximum load
per bicycle is 20 kg.

If not in use, the carrier system can be
slid back into the vehicle floor.

There must not be any objects on the
bicycles that could become loose
during transportation.

Caution

Do not attach bicycles with carbon
pedal cranks to bicycle carriers.
The bicycles might get damaged.

Extending

Open the tailgate.

9 Warning

No persons may remain in the
extension zone of the rear carrier
system, risk of injury.

Storage 55

Pull release lever up. The system
disengages and travels quickly out of
the bumper.

Completely pull out the rear carrier
system until you hear it engage.

Ensure that it is not possible to push
in the rear carrier system without
pulling the release lever again.

9 Warning

It is only permissible to fit objects
to the rear carrier system if the
system has been correctly
engaged. If the rear carrier system

will not engage correctly, do not fit
objects to the system and slide the
system back. Seek the assistance
of a workshop.

Install the tail lamps

First remove the rear (
front (2) tail lamp from the recesses.

1), then the

Open out the lamp support on the
back of the tail lamp completely until
it engages.

56 Storage

Push the clamping lever down and
push the lamp support into the
retainer until it engages.

Perform this procedure for both tail
lamps.

Check the cable and lamp position to
make sure these are correctly
installed and are securely located.

Lock the rear carrier system

Swivel the left clamping lever (1) first,
followed by the right clamping lever
(2) until they stop. Both clamping
levers must point backwards,
otherwise safe functionality is not
guaranteed.

Note
Close the tailgate.

Unfold pedal crank recesses

Fold one or both pedal crank
recesses upwards until the diagonal
support engages.

Adapting the rear carrier system to a bicycle

Storage 57

Remove the pedal crank mounts from
the pedal crank recesses.

Push the release lever on the strap
retainer and remove the strap
retainer.

Press the release lever and withdraw
the wheel recesses.

58 Storage

Prepare the bicycle for attachment

Note
The maximum width for the pedal
crank is 38.3 mm and the maximum
depth is 14.4 mm.

Rotate the left pedal (without a chain
cog) vertically downwards. The pedal
on the left pedal crank must be
horizontal.

The front bicycle must have its front
wheel facing left.

The rear bicycle must have its front
wheel facing right.

Attaching a bicycle to the rear carrier system

If the bicycle has curved pedal
cranks, screw in the pedal crank unit
all the way (position 1).

With the rotary lever on the pedal
crank recess, roughly adapt the
adjustable pedal crank unit to the
protrusion of the pedal crank.

If the bicycle has straight pedal
cranks, unscrew the pedal crank unit
completely (position 5).

Storage 59

Put on the bicycle. The pedal crank
here must be placed in the pedal
crank recess opening as shown in the
illustration.

Caution

Make sure that the pedal does not
touch the surface of the rear end
carrier. Otherwise the crankset
might be damaged during the
transport.

Insert pedal crank mount into outer
rail of each pedal crank recess from
above and slide downwards until at
least underneath the notching.

Attach the pedal crank by rotating the
attachment screw on the pedal crank
mount.

Place the wheel recesses so that the
bicycle is roughly horizontal. Here,
the distance between the pedals and
the tailgate should be at least 5 cm.

Both bicycle tyres must be in the
wheel recesses.

Caution

Make sure to pull out the wheel
recesses as far as necessary to
have both bicycle tyres placed in
the recesses. Otherwise a
horizontal mounting of the bicycle
is not ensured. Disregard could
lead to damage of the bicycle
wheels caused by hot exhaust
fumes.

60 Storage

Align the bicycle in the longitudinal
direction of the vehicle: Slightly
loosen the pedal mount.

Place the bicycle upright using the
rotary lever on the pedal crank
recess.

If the two bicycles obstruct one
another, the relative positions of the
bicycles can be adapted by adjusting
the wheel recesses and the rotary
lever on the pedal crank recess until
the bicycles no longer touch one
another. Make sure there is sufficient
clearance from the vehicle.

Tighten the attachment screw for the
pedal bearing mount to its maximum
point by hand.

Secure both bicycle wheels to wheel
recesses using strap retainers.

Check the bicycle to make sure it is
secure.

Caution

Ensure gap between bicycle and
vehicle is at least 5 cm. If
necessary, loosen handlebar and
swivel sideways.

The settings for the wheel recesses
and on the rotary lever on the pedal
crank recess should be noted and
saved for each bicycle. Correct
presetting will facilitate refitting of the
bicycle.

Note
It is recommended to attach a
warning sign at the rearmost bicycle
to increase visibility.

Removing a bicycle from the rear carrier system

Undo strap retainers on both bicycle
tyres.

Storage 61

Hold on to the bicycle, loosen the
attachment screw for the pedal
bearing mount, then lift the pedal
bearing mount to remove it.

Retracting the rear carrier system

Push the pedal crank mounts into the
pedal crank recess as shown in the
illustration.

Press release lever and slide in wheel
recesses all the way as far as they will
go.

Insert the strap retainer and pull
tightly downwards as far as possible.

Disengage the locking lever on the
diagonal support and fold both pedal
crank recesses down.

9 Warning

Risk of pinching.

62 Storage

Push the clamping lever down and
pull both lamp supports out of the
recesses.

Swivel first the right clamping lever
(1) forwards, followed by the left
clamping lever (2), until they can be
engaged in their respective recesses.

Fold in the lamp supports on the
backs of the tail lamps.

First place the front tail lamp (1), then
the rear tail lamp (2) in the recesses
and push down as far as possible.
Push cables all the way into all guides
in order to prevent damage.

Open the tailgate.

Push the release lever up and hold.
Lift the system slightly and push it into
the bumper until it engages.

Release lever must return to original
position.

9 Warning

If the system cannot be correctly
engaged, please seek the
assistance of a workshop.

Storage 63

Load compartment

Load compartment extension

The rear backrest, in a single unit or
split, can be locked in an upright
position for transporting bulky items.

Pull the release handle, pull the
backrest forwards to the vertical
position and engage.

When unlocking, a red marking
appears next to the release lever. The
backrest is only engaged correctly
when the red bolt is no longer
protruding.

If the backrest is split, unlock the
relevant side, and unlock at both
sides if it is a single unit.

Folding down rear backrests

Remove load compartment cover as
necessary.

Push head restraints down by
pressing the catch.

Guide the seat belts through side
supports to protect them against
damage. When folding the backrests,
pull the seat belts along with them.

Disengage the backrest (single or
split) using the release lever and fold
it down onto the seat cushion.

If the backrest is split, unlock the
relevant side, and unlock at both
sides if it is a single unit.

If the vehicle is to be loaded via a rear
door, take the seat belt out of the seat
backrest guide, roll it up and insert the
latch plate into the side shade
retainer.

64 Storage

Move rear seat backrests upright and
allow locking mechanisms to engage
audibly at both sides. Once the
backrests are locked the red mark
must no longer protrude.

The rear seat backrests can be
locked in two positions.

Do not trap the seat belt when moving
the backrest to the upright position.

Install the load compartment cover.

9 Warning

Only drive the vehicle when the
backrests are securely locked into
position. Otherwise there is a risk
of personal injury or damage to the
load or vehicle in the event of hard
braking or a collision.

The seat belt of the centre seat could
be blocked when the backrest is
folded up too quickly. To unlock the
retractor, push in the seat belt or pull
it out by approx. 20 mm and then let
go.

Load compartment cover

Do not place any objects on the cover.

5-door passenger vehicle

Lift the cover backwards, until it
unlatches, then remove.

Fit in reverse order.

Storage 65

3-door passenger vehicle

Lift the cover backwards until it
unlatches, set at an angle, then
remove.

Fit in reverse order.

Stowing

When the load compartment is fully
loaded, stow the load compartment
cover behind the rear seat backrests:

Lift the cover backwards until it
unlatches, then slide down in guides
behind the seat backrests.

Van

The load compartment cover consists
of four segments which can be
individually removed and inserted.

The rear segment (1) has identical
functionality (removal and
installation) to that of the 3-door
passenger vehicle 3 64.

To remove the three other segments
(order 2 to 4) lift at the rear,
disengage, twist and remove.

Install the segments in the order 4 to

1. Engage segments in recesses at

the side.
The segments overlap at the

connecting points when they are
closed.

66 Storage

Rear floor storage cover

The double load-bay floor can be
inserted in the load compartment in
two positions:

■ directly beneath the cover for the
spare wheel recess or the floor
cover,

■ or in the upper openings in the load
compartment.

To remove, lift the load-bay floor
using the lever and pull backwards.

To insert, push the load-bay floor
forwards in the corresponding guide,
then lower.

If mounted in the upper position, the
space between the load-bay floor and
the spare wheel well cover can be
used as a stowage compartment.

In this position, if the rear seat
backrests are folded forwards, an
almost completely flat load bay is
created.

The double load-bay floor is able to
withstand a load of no more than
100 kg.

In models with a tyre repair kit, the
spare wheel recess may be used as
an additional stowage compartment.

Lashing eyes

The lashing eyes are designed to
secure items against slippage, e.g.
using lashing straps or luggage net.

Storage 67

Warning triangle

Store warning triangle in rear load
compartment wall: first fit warning
triangle into recess on left and then
insert in guide on right.

To remove the warning triangle, lift to
the right and pull out to the right.

First aid kit

Stow the first-aid kit (cushion) in the
compartment in the left wall of the
load compartment.

To open the compartment, disengage
cover and open it.

Roof rack system

Roof rack

For safety reasons and to avoid
damage to the roof, the vehicle
approved roof rack system is
recommended.

Follow the installation instructions
and remove the roof rack when not in
use.

Fitting on model without sun roof

Push covers for concealing roof rack
mounts down and push backwards
with a valve cap key 3 170.

68 Storage

Fitting on model with sun roof

Disengage covers concealing roof
rack mounts by pushing sliders in
direction of arrow (e.g. with coin) and
remove upwards. To close roof rack
mounts, first insert covers at front and
engage sliders at rear.

Attach roof rack at appropriate points,
see enclosed roof rack system
instructions.

Loading information

■ Heavy objects in the load
compartment should be placed
against the seat backrests. Ensure
the backrests are securely
engaged. If objects can be stacked,
the heavier objects should be
placed at the bottom.

■ Secure objects with lashing straps
attached to lashing eyes.

■ Secure loose objects in load
compartment to prevent sliding.

■ When transporting objects in the
load compartment, the backrests of
the rear seats must not be angled
forward.

■ Do not allow the load to protrude
above the upper edge of the
backrests.

■ Do not place any objects on the
load compartment cover or the
instrument panel, and do not cover
the sensor on top of the instrument
panel.

■ The load must not obstruct the
operation of the pedals, parking
brake and gear selector, or hinder
the freedom of movement of the
driver. Do not place any unsecured
objects in the interior.

■ Do not drive with an open load
compartment.

9 Warning

Always make sure that the load in
the vehicle is securely stowed.
Otherwise objects can be thrown

Storage 69

around inside the vehicle and
cause personal injury or damage
to the load or car.

■ The payload is the difference
between the permitted gross
vehicle weight (see identification
plate 3 197) and the EC kerb
weight.

To calculate the payload weight,
enter the data for your vehicle in the
Weights table at the front of this
manual.

The EC kerb weight includes
weights for the driver (68 kg),
luggage (7 kg) and all fluids (tank
90 % full).

Optional equipment and
accessories increase the kerb
weight.

■ Driving with a roof load increases
the sensitivity of the vehicle to
cross-winds and has a detrimental
effect on vehicle handling due to
the vehicle’s higher centre of
gravity. Distribute the load evenly
and secure it properly with retaining
straps. Adjust the tyre pressure and

vehicle speed according to the load
conditions. Check and retighten the
straps frequently.

Do not drive faster than 75 mph.
The permissible roof load is 75 kg.

The roof load is the combined
weight of the roof rack and the load.

70 Instruments and controls

Instruments and controls

Controls ....................................... 70

Warning lights, gauges and indi‐

cators ........................................... 76

Information displays ..................... 86

Vehicle messages ........................ 90

Trip computer ............................... 91

Vehicle personalisation ................ 95

Controls

Steering wheel adjustment

Unlock lever, adjust steering wheel,
then engage lever and ensure it is
fully locked.

Do not adjust steering wheel unless
vehicle is stationary and steering
wheel lock has been released.

Steering wheel controls

The Infotainment system and the
Info-Display can be operated via the
controls on the steering wheel.

Further information is available in the
Infotainment system manual.

Instruments and controls 71

Heated steering wheel

Activate heating in combination with
the seat heating by pressing ß*
button once or several times with the
ignition on.

LED ß on: driver seat heating on.
LED ß and * on: driver seat heating

and steering wheel heating on.
LED * on: steering wheel heating on.

The steering wheel is heated in the
areas shown in the illustration when
the engine is running and during an
Autostop.

Horn

Press j.

72 Instruments and controls

Windscreen wiper/washer

Windscreen wiper

The lever always springs back to its
original position.

= fast

&

= slow

%

= interval wiping

$

= off

§

For a single wipe when the
windscreen wiper is off, press the
lever down.

Run through the windscreen wiper
stages by pushing the lever past the
resistance point and holding it. An
acoustic signal sounds at §.

Do not use if the windscreen is frozen.
Switch off in car washes.

Adjustable wiper interval
To set the wiper interval to a value
between 2 and 15 seconds: Switch on
ignition, move lever down from
position §, wait desired time interval
and raise lever to $.

After turning on the ignition and
setting the lever to $, the interval is
set to 6 seconds.

Automatic wiping with rain sensor

= Automatic wiping with rain

$

sensor

The rain sensor detects the amount of
water on the windscreen and
automatically regulates the frequency
of the windscreen wiper.

Instruments and controls 73

Keep the sensor free from dust, dirt
and ice.

Windscreen washer

Pull lever. Washer fluid is sprayed
onto the windscreen and the wiper
wipes a few times.

Rear window wiper/washer

Push lever forwards. The rear window
wiper wipes in interval mode. Switch
off by pushing lever forwards again.

Do not use if the rear window is
frozen.

Switch off in car washes.
If the lever is held forwards, washer

fluid is sprayed onto the rear window.

The rear windscreen wiper comes on
automatically when the windscreen
wiper is switched on and reverse gear
is engaged. Activation or deactivation
of this function can be changed.
Vehicle personalisation 3 95.

Outside temperature

A drop in temperature is indicated
immediately and a rise in temperature
after a time delay.

If the outside temperature drops to
3 °C, the symbol : illuminates in the
Triple-Info-Display or the
Board-Info-Display as a warning for

74 Instruments and controls

icy road conditions. : remains
illuminated until the temperature
reaches at least 5 °C.

In vehicles with Graphic-Info-Display
or Colour-Info-Display, a warning
message appears in the display as a
warning for icy road conditions. There
is no message below -5 °C.

9 Warning

The road surface may already be
icy even though the display
indicates a few degrees above
0 °C.

Clock

Date and time are shown in the
Info-Display.

Graphic-Info-Display,
Colour-Info-Display 3 86.

Set date and time in Triple-Info-Display

The Infotainment system must be off.
Activate setting mode by holding the
Ö button depressed for approx.
2 seconds. The flashing value is
adjusted using the ; button. The Ö
button is used to switch to the next
mode and to exit setting mode.

Automatic time synchronisation
The RDS signal of most VHF
transmitters automatically sets the
time, identified by } in the display.

Some transmitters do not send a
correct time signal. In such cases, it is
recommend to switch off automatic
time synchronisation.

Activate setting mode and set it to
year setting. Hold the Ö button
depressed for approx. 3 seconds
until } flashes in the display and "RDS
TIME" appears. The function is
activated (RDS TIME 1) or
deactivated (RDS TIME 0) with
the ; button. Exit setting mode using
the Ö button.

Instruments and controls 75

Power outlets

The power outlet is located in the
centre console.

Caution

Do not damage the outlet by using
unsuitable plugs.

Connecting electrical accessories
while the engine is off will discharge
the battery. Do not exceed the
maximum power consumption of
120 Watts. Do not connect any

current-delivering accessories, e.g.
electrical charging devices or
batteries.

Electrical accessories that are
connected must comply with the
electromagnetic compatibility
requirements laid down in
DIN VDE 40 839.

If the tyre repair set is in operation, no
consumers may be connected to the
auxiliary outlet.

Stop-start system 3 116.

Cigarette lighter

The cigarette lighter is located in the
centre console.

Press in cigarette lighter. It switches
off automatically once the element is
glowing. Pull out lighter.

Ashtrays

Caution

To be used only for ash and not for
combustible rubbish.

Portable ashtray

76 Instruments and controls

The portable ashtray can be placed in
the cupholders. Open cover to use.

Warning lights, gauges and indicators

Instrument cluster

In some versions, the needles of the
instruments briefly rotate to the end
position when the ignition is switched
on.

Speedometer

Indicates vehicle speed.

Speed warning

With the "Personalised key" function,
P6 a particular top speed can be
assigned to each vehicle key. When
this speed is exceeded, a warning
buzzer sounds. Vehicle
personalisation 3 95.

Odometer

The bottom line displays the recorded
distance.

Instruments and controls 77

Trip odometer

The top line displays the recorded
distance since the last reset.

To reset, hold the reset knob
depressed for a few seconds with the
ignition on.

Tachometer

Displays the engine speed.
Drive in a low engine speed range for

each gear as much as possible.
Upshift when indicated by the control

indicator [ 3 82.

Caution

If the needle is in the red warning
zone, the maximum permitted
engine speed is exceeded. Engine
at risk.

Fuel gauge

Displays the fuel level or gas level in
the tank depending on the operation
mode.

Control indicator Y illuminates if the
level in the tank is low. Refuel
immediately if it flashes.

During liquid gas operation, the
system automatically switches over to
petrol operation when gas tanks are
empty 3 77.

Never run the tank dry.
Because of the fuel remaining in the

tank, the top-up quantity may be less
than the specified tank capacity.

Fuel selector

Pressing button LPG switches
between petrol and liquid gas
operation. The LED 1 status shows
the current operating mode.

78 Instruments and controls

1 off = petrol operation
1 illumi‐

nates
1 flashes = no switching is

As soon as the liquid gas tanks are
empty, petrol operation is
automatically engaged until the
ignition is switched off.

Fuel for liquid gas operation 3 135.

= liquid gas operation

possible, one type
of fuel is empty

Service display

The message InSP appears when it
is time for servicing. Further
information 3 194.

Transmission display

The mode or selected gear is shown
in the transmission display.

P = Automatic transmission

park position
R = Reverse gear
N = Neutral position
A = Manual transmission

automated automatic mode
D = Drive position

1, 2,3= Selected gear, automatic

transmission

1 - 5 = Current gear, manual

transmission automated,
manual mode

Control indicators

The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. When the ignition is
switched on, most control indicators
will illuminate briefly as a functionality
test.

The control indicator colours mean:
red = danger, important

reminder
yellow = warning, information, fault
green = confirmation of activation
blue = confirmation of activation

Control indicators in the instrument

Instruments and controls 79

80 Instruments and controls

Turn signal

O illuminates or flashes green.

Illuminates

The control indicator illuminates
briefly when the parking lights are
switched on.

Flashes

The control indicator flashes if a turn
signal or the hazard warning flashers
are activated.

Rapid flashing: failure of a turn signal
light or associated fuse, failure of turn
signal light on trailer.

Bulb replacement 3 153. Fuses
3 166. Turn signals 3 101.

Seat belt reminder

X illuminates or flashes red.

Illuminates

After the ignition is switched on until
the seat belt is fastened.

Flashes

After starting off until the seat belt is
fastened.

Fastening the seat belt 3 39.

Airbag and belt tensioners

v illuminates red.
When the ignition is switched on, the

control indicator illuminates for
approx. 4 seconds. If it does not
illuminate, does not go out after
4 seconds or illuminates whilst
driving, there is a fault in the belt
tensioner or the airbags. In this case
the LEDs in the button W will also
flash. The airbags and belt tensioners
may fail to trigger in the event of an
accident.

Deployment of the belt tensioners or
airbags is indicated by continuous
illumination of v.

9 Warning

Have the cause of the fault
remedied immediately by a
workshop.

Airbag system, belt tensioners 3 41,
3 38.

Airbag deactivation

W illuminates together with the LEDs
in the button W: airbag deactivated
3 46.

W flashes: the system can be
activated or deactivated within
15 seconds of switching on the
ignition 3 46.

Charging system

p illuminates or flashes red.
Illuminates when the ignition is

switched on and extinguishes shortly
after the engine starts.

Instruments and controls 81

Illuminates when the engine is running

Stop, switch off engine. Battery is not
charging. Engine cooling may be
interrupted. In diesel engines, power
to the brake servo unit may be cut.
Seek the assistance of a workshop.

Flashes during or after engine start

Battery voltage too low. Have
electrical system tested by a
workshop.

Malfunction indicator light

Z illuminates or flashes yellow.
Illuminates when the ignition is

switched on and extinguishes shortly
after the engine starts.

Illuminates when the engine is running

Fault in the emission control system.
The permitted emission limits may be
exceeded. Immediately seek the
assistance of a workshop.

Flashes when the engine is running

Fault that could lead to catalytic
converter damage. Ease up on the
accelerator until the flashing stops.
Seek the assistance of a workshop
immediately.

Service vehicle soon

A illuminates or flashes yellow.

Illuminates when the engine is running

Fault in engine or transmission
electronics. The electronics switch to
an emergency running programme.
Fuel consumption may be increased
and the vehicle handling may be
impaired.

If the fault persists after restarting the
vehicle, consult a workshop.

Illuminates together with InSP4 in the service display

Seek the assistance of a workshop for
draining the diesel fuel filter.

Flashes with switched on ignition

Fault in the immobiliser system. The
engine cannot be started 3 26.

Brake and clutch system

Brake and clutch fluid level

R illuminates red.
Illuminates when the parking brake is

released if the brake and clutch fluid
level is too low 3 150.

9 Warning

Stop. Do not continue your
journey. Consult a workshop.

Illuminates after the ignition is
switched on if the parking brake is
applied 3 129.

Apply parking brake

R flashes red.
On vehicles with manual transmission

automated, R flashes for a few
seconds when the ignition is switched
off if the parking brake is not applied.

82 Instruments and controls

On vehicles with manual transmission
automated, R flashes when the
driver's door is opened if no gear is
engaged and the parking brake is not
applied.

Apply clutch pedal

- illuminates yellow.
Clutch pedal needs to be operated to

start the engine.
Stop-start system 3 116.

Antilock brake system (ABS)

u illuminates red.
Illuminates for a few seconds after the

ignition is turned on. The system is
ready for operation when the control
indicator extinguishes.

If the control indicator does not go out
after a few seconds, or if it illuminates
while driving, there is a fault in the
ABS. The brake system remains
operational but without ABS
regulation.

Antilock brake system 3 128.

Upshift

[ illuminates green when upshifting
is recommended for fuel saving
reasons.

Sport mode

1 illuminates yellow.
The symbol is illuminated when Sport

mode is on 3 126.

Winter mode

T illuminates yellow.
The symbol is illuminated when

Winter mode is on 3 121, 3 126.

Power steering

p illuminates yellow.
Fault in power steering system. The

power steering may have failed. The
vehicle can be steered but
considerably more force is required.
Contact a workshop.

Ultrasonic parking assist

r illuminates or flashes yellow.

Illuminates

Fault in system. Have the cause of the
fault remedied by a workshop.

Flashes

Fault due to sensors that are dirty or
covered by ice or snow.

or
Interference due to external sources

of ultrasound. Once the source of
interference is removed, the system
will operate normally.

Ultrasonic parking assist 3 132.

Electronic Stability Program

v flashes or illuminates yellow.
Illuminates for a few seconds when

the ignition is switched on.

Instruments and controls 83

Flashing during driving

The system is actively engaged.
Engine output may be reduced and
the vehicle may be braked
automatically to a small degree
3 130.

Illuminates while driving

The system is switched off or a fault
is present. Continued driving is
possible. Driving stability, however,
may deteriorate depending on road
surface conditions.

Have the cause of the fault remedied
by a workshop.

Electronic stability program 3 130.

Engine coolant temperature

W illuminates red.

Illuminates when the engine is running

Stop, switch off engine.

Caution

Coolant temperature too high.

Check coolant level immediately
3 149.

If there is sufficient coolant, consult a
workshop.

Preheating and diesel particle filter

! illuminates or flashes yellow.

Illuminates

Preheating activated. Only activates
when outside temperature is low.

Flashes

(in vehicles fitted with a diesel particle
filter).

Control indicator ! flashes if the filter
requires cleaning and previous
driving conditions did not permit
automatic cleaning. Continue driving
and if possible do not allow engine
speed to drop below 2000 rpm.

The control indicator ! extinguishes
as soon as the self-cleaning
operation is complete.

Diesel particle filter 3 119, Stop-start
system 3 116.

Deflation detection system and tyre pressure monitoring system

w illuminates red or yellow.

Deflation detection system

Illuminates red
Deflation detected. Stop immediately
and check tyre pressure.

Illuminates yellow
Fault in system. Consult a workshop.

Deflation detection system 3 175.

Tyre pressure monitoring system

w illuminates or flashes yellow.

84 Instruments and controls

Illuminates yellow
Deflation detected. Stop as soon as
possible and check tyre pressure.

Flashes yellow for 1 minute then illuminates continuously

Fault in system. Consult a workshop.
Tyre pressure monitoring system

3 174.

Engine oil pressure

I illuminates red.
Illuminates for a few seconds after the

ignition is switched on.

Illuminates when the engine is running

Caution

Engine lubrication may be
interrupted. This may result in
damage to the engine and/or
locking of the drive wheels.

1. Depress clutch.

2. Select neutral gear, set selector
lever to N.

3. Move out of the flow of traffic as
quickly as possible without
impeding other vehicles.

4. Switch off ignition.

9 Warning

When the engine is off (except
during an Autostop), considerably
more force is needed to brake and
steer.

Do not remove key until vehicle is
stationary, otherwise the steering
wheel lock could engage
unexpectedly.

Check oil level before seeking the
assistance of a workshop 3 148.

Low engine oil level

S illuminates yellow.
Engine oil level is checked

automatically.

Illuminates when the engine is running

Low engine oil level. Check engine oil
level and top up as necessary
3 148.

Low fuel

Y illuminates or flashes yellow.

Illuminates

Level in fuel tank too low.

Flashes

Fuel used up. Refuel immediately.
Never run the tank dry.

Erratic fuel supply can cause catalytic
converter to overheat 3 120.

Bleeding the diesel fuel system
3 152.

Apply footbrake

j illuminates yellow.

Instruments and controls 85

With manual transmission
automated, the engine can only be
started if the foot brake is depressed.
If the foot brake is not depressed, the
control indicator illuminates 3 124.

Exterior light

8 illuminates green.
Illuminated when the exterior lights

are on 3 98.

High beam

P illuminates blue.
Illuminated when high beam is on and

during headlight flash 3 99.

Adaptive forward lighting

B illuminates yellow.

Illuminates when the engine is running

Fault in system.
Seek the assistance of a workshop.

Illuminates after ignition is switched on

Control indicator B illuminates for
approx. 4 seconds as a functionality
test.

Control indicator B illuminates for
approx. 8 seconds as a reminder that
the headlights have been set to
symmetrical low beam 3 100.

Fog light

> illuminates green.
Illuminated when the front fog lights

are on 3 102.

Rear fog light

r illuminates yellow.
Illuminated when the rear fog light is

on 3 102.

Cruise control

m illuminates or flashes green.

Illuminates

Illuminates when the system is on
3 131.

Flashes

Cruise control was enabled without
depressing the brake pedal
beforehand.

86 Instruments and controls

Information displays

Triple-Info-Display

Displays time, outside temperature
and date or Infotainment system
(when it is on).

When the ignition is off, the time, date
and outside temperature can be
displayed by briefly pressing one of
the two buttons below the display.

Graphic-Info-Display, Colour-Info-Display

Displays time, outside temperature,
date or Infotainment system (when it
is on) and electronic climate control
system.

The Colour-Info-Display displays the
information in colour.

The type of information and how it is
displayed depends on the equipment
of the vehicle and the settings made.

Selecting functions

Functions and settings of the
Infotainment system and electronic
climate control system are accessed
via the display.

Selections are made via the menus
and buttons or the left adjuster wheel
of the steering wheel.

Selecting with the Infotainment system buttons

Select menu items via the menus and
by using the Infotainment system
buttons. The OK button is used to
select the highlighted item or confirm
a command.

Instruments and controls 87

To exit a menu, press the right or left
arrow button until Return or Main
appear and select.

Selecting with the left adjuster wheel on the steering wheel

Rotate to select a menu item.
Press the adjuster wheel to select the

highlighted item or confirm a
command.

Function areas

For each function area there is a main
page (Main), which is selected at the
top edge of the display (only with trip
computer and Mobile Phone Portal):

■ Audio,

■ Telephone,

■ Trip computer.

System settings

Press the Settings button on the
Infotainment system. For
Infotainment system CD 30, no menu
may be selected.

88 Instruments and controls

Setting date and time

Select menu item Time, Date from the
Settings menu.

Select the required menu items and
make settings.

Changing the time setting will also
change the time setting of the
navigation system.

Automatic time synchronisation
The RDS signal of most VHF
transmitters automatically sets the
time.

Some transmitters do not send a
correct time signal. In such cases, we
recommend to switch off automatic
time synchronisation.

The function is activated by
highlighting the field in front of
Synchron. clock automatical. in the
Time, Date menu.

Language selection

Selection is indicated by a 6 in front
of the menu item.

When the language setting of the
display is changed, the system will
ask whether the announcement
language of the Mobile Phone Portal
should also be changed - see
Infotainment system manual.

The display language for some
functions can be selected.

Select menu item Language from the
Settings menu.

Select the desired language.

Instruments and controls 89

Setting units of measure

Select menu item Units from the
Settings menu.

Select the desired unit.
Selections are indicated by a o in

front of the menu item.

Adjusting contrast (Graphic-Info-Display)

Select menu item Contrast from the
Settings menu.

Confirm the required setting.

Setting display mode
Display brightness is dependent on
vehicle lighting. Additional settings
can be made as follows:

Select menu item Day / Night from the
Settings menu.

Automatic The colours are adapted to
the exterior lights.

Always day design black or coloured
text on light background.

Always night design white or coloured
text on dark background.

Selection is indicated by a o in front
of the menu item.

Ignition logic
See Infotainment system manual.

Smartphone controller

The smartphone controller allows a
smartphone to access vehicle data
via WLAN or Bluetooth connection.
This data can then be displayed and
analysed on the smartphone.

90 Instruments and controls

Vehicle messages

Messages are given via the
instrument panel display or as
warning and signal buzzers. Check
control messages appear on the
Info-Display. Some appear in an
abbreviated form. Confirm warning
messages with the multifunction knob
3 86.

Warning chimes

When starting the engine or whilst driving

■ If seat belt is not fastened.

■ If a door or the tailgate is not fully
closed when starting-off.

■ If a certain speed is exceeded with
the parking brake applied.

■ If the speed programmed at the
factory is exceeded.

■ If the vehicle has manual
transmission automated and the
driver's door is opened when the

engine is running, a gear is
engaged and the foot brake is not
depressed.

■ Warning signal sounds three times
if the rear carrier system is
extended and reverse gear is
selected.

When the vehicle is parked and the driver's door is opened

■ When the key is in the ignition
switch.

■ With exterior lights on.

■ For manual transmission
automated, if the parking brake is
not applied and no gear is engaged
when the engine is switched off.

During an Autostop

■ If the driver's door is opened.

Battery voltage

Low battery voltage in the radio
remote control. On vehicles without
check control, the message InSP3
appears in the instrument panel
display. Replace the battery 3 20.

Brake light switch

Brake light does not come on during
braking. Have the cause of the fault
remedied immediately by a
workshop.

Drain diesel fuel filter

If there is water in the diesel fuel filter,
the message InSP4 appears in the
instrument panel. In some models
InSP4 illuminates together with A in
the instrument. Consult a workshop.

Lighting

Important exterior lighting lamps,
including cables and fuses, are
monitored. In trailer mode, trailer
lighting is also monitored. Trailers
with LED lighting must have an
adapter that enables lamp monitoring
as with conventional bulbs.

Trip computer

Instruments and controls 91

The failed lighting will be indicated in
the information display or the
message InSP2 will appear in the
instrument panel display.

The trip computer provides
information on driving data, which is
continually recorded and evaluated
electronically.

The functions can be selected via the
buttons on the wiper lever.

Turn the adjuster wheel to select:

■ Range

■ Instantaneous consumption

■ Distance travelled

■ Average speed

■ Absolute consumption

■ Average consumption

■ Stop watch

92 Instruments and controls

Range

Range is calculated from current fuel
tank content and current
consumption. The display shows
average values.

After refuelling, the range is updated
automatically after a brief delay.

When the fuel level in the tank is low,
a message appears on the display.
Confirm the warning message by
pressing 7 on the wiper lever.

Instantaneous consumption

Display of the instantaneous
consumption. At low speeds,
consumption per hour is displayed.

Distance travelled

Display of distance travelled.

Average speed

Display of average speed. The
measurement can be reset at any
time.

Absolute consumption

Display of fuel consumed.

Average consumption

Display of average consumption. The
measurement can be reset at any
time.

Stop watch

Measurement of the time from
activation to deactivation.

Press the 7 button to start and stop
the measurement.

Reset trip computer

The measurement or calculation of
the following trip computer
information can be restarted:

■ Distance,

■ Average speed,

■ Absolute consumption,

■ Average consumption.

Select the desired function. To reset
a value to zero, hold down the button
7 for more than three seconds.

To reset all functions, hold down the
button 7 for more than 6 seconds.

Trip computer in Graphic­Info-Display or Colour­Info-Display

The main page of the trip computer
provides information on range,
current consumption and average
consumption of BC 1.

To display other trip computer data,
press the BC button on the
Infotainment system, select the trip
computer menu from the display or
press the left adjuster wheel on the
steering wheel.

Select BC 1 or BC 2 from the trip
computer menu.

Range

Instruments and controls 93

Range is calculated from current fuel
tank content and current
consumption. The display shows
average values.

After refuelling, the range is updated
automatically after a brief delay.

When the fuel level in the tank is low,
the message Range appears in the
display.

When the fuel tank is nearly empty,
the message Please refuel! appears
in the display.

Instantaneous consumption

Displays the instantaneous
consumption. At low speeds,
consumption per hour is displayed.

Distance

Display of distance travelled. The
measurement can be reset at any
time.

Average speed

Display of average speed. The
measurement can be reset at any
time.

Stoppages in the journey with the
ignition off are not included in the
calculations.

94 Instruments and controls

Absolute consumption

Displays fuel consumed. The
measurement can be reset at any
time.

Average consumption

Displays average consumption. The
measurement can be reset at any
time.

Restart trip computer

The measurement or calculation of
the following trip computer
information can be restarted:

■ Distance,

■ Average speed,

■ Absolute consumption,

■ Average consumption.
Select BC 1 or BC 2 from the Board

Computer menu.

The information of the two trip
computers can be reset separately,
making it possible to evaluate data
from different time periods.

Select the required trip computer
information and confirm.

To reset all information of a trip
computer, select menu item All
values.

Instruments and controls 95

Stop watch

Select menu item Stop Watch from
the Board Computer menu.

To start, select menu item Start. To
stop, select menu item Stop.

To reset, select menu item Reset.
The relevant stop watch display can

be selected in the Options menu:

Driving Time excl. Stops

The time the vehicle is in motion is
recorded. Stationary time is not
included.

Driving Time incl. Stops

The time the vehicle is in motion is
recorded. The time the vehicle is
stationary with the ignition switched
on is included.

Travel Time

Measurement of the time from
manual activation via Start to manual
deactivation via Reset.

Vehicle personalisation

The vehicle-specific functions P1 to
P7 can be activated and deactivated.

The setting selected is automatically
stored depending on the vehicle key
used.

Different settings are stored for each
vehicle key. Use of a specific vehicle
key will activate the settings
associated with it.

A total of up to five vehicle keys can
be programmed separately.

Programming permits the technical
prerequisite of the relevant function.
To activate and deactivate the
functions and set the functions,
please see the relevant sections.

Programming

■ Turn the ignition off, the key must
be in the ignition switch.

96 Instruments and controls

■ Pull turn signal stalk and wiper stalk
simultaneously to the steering
wheel until you hear a confirmation
signal (approx. 3 seconds).

■ The miles display shows P1.

■ Push the turn signal stalk (left) up
or down and select the desired
function P1 - P7.

■ Push the wiper stalk (right) up or
down and select status On or OFF,
or input a value for speed (P6) or
value for volume (P7).

■ Pull turn signal stalk (left) and wiper
stalk (right) simultaneously to the
steering wheel until you hear a
confirmation signal (approx.
3 seconds).

The selected settings are now stored
for the key in the ignition switch. To
activate and deactivate the functions
and set the functions selected, please
see the relevant sections.

Repeat the procedure to programme
additional keys.

Programmable functions

P1: Switch on the external lighting
using the remote control (Entry
lighting). Entry lighting 3 105.

P2: Automatic rear windscreen wiper
when reverse gear is selected. Rear
window wiperwasher 3 73.

P3: Lane change indication: three
flashes when the lever is moved
slightly. Turn and lane-change
signals 3 101.

P4: Automatic locking 3 24.
P5: Selective unlocking 3 21.
P6: Speed warning 3 76.
P7: Volume of the acoustic turn signal

3 101.

Instruments and controls 97

98 Lighting

Lighting

Exterior lighting ............................ 98

Interior lighting ........................... 103

Lighting features ........................ 105

Exterior lighting

Light switch

Turn light switch:
AUTO = Automatic light control:

Exterior lighting is
switched on and off
automatically depending
on external lighting

m

conditions.

= Activation or deactivation

of the automatic light
control. Switch turns back
to AUTO

8
9

When switching on the ignition,
automatic light control is active.

Control indicator 8 3 85.

= sidelights
= low beam

Tail lights

Tail lights are illuminated together
with low beam and sidelights.

Automatic light control

Lighting 99

Automatic light control function

When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
light and low beam depending on
external lighting conditions.

Daytime running light
Daytime running light increases
visibility of the vehicle during daylight.

Tail lights are not on.

Automatic low beam activation
During poor lighting conditions the
low beam is switched on.

Tunnel detection
When a tunnel is entered the low
beam is switched on.

Adaptive forward lighting 3 100.

High beam

To switch from low to high beam,
push lever.

To switch to low beam, push lever
again or pull.

Headlight flash

To activate the headlight flash, pull
lever.

Headlight range adjustment

Manual headlight range adjustment

To adapt headlight range to the
vehicle load to prevent dazzling: Turn
thumb wheel ? until the required
setting is shown on the miles display.

0 = Front seats occupied
1 = All seats occupied
2 = All seats occupied and load

compartment laden

3 = Driver's seat occupied and load

compartment laden