Vaughan 240022 Instruction Manual

DIGITAL
THERMOMETER
WITH TRICOLOR LCD

INSTRUCTION MANUAL

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS.
FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY
DAMAGE.

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER
SERVICE DEPARTMENT AT 1-800-423-3598. BEFORE YOU CALL, HAVE THE FOLLOWING
INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN
ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU
WOULD LIKE TO MAKE A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT:
[e-mail]. YOUR FEEDBACK IS VITAL TO US.

Model no 240022

Component No. 692650

TABLE OF CONTENTS

INTENDED USE .............................................................. 1

GENERAL SAFETY RULES ...................................................... 1-3

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS ......................... 1

LASER SAFETY ......................................................... 2

TOOL USE AND CARE ................................................... 2-3

FUNCTIONAL DESCRIPTION .................................................... 3-4

LCD INDICATIONS AND SYMBOLS ......................................... 4

BUTTON FUNCTIONS .................................................... 4

BATTERY INSTALLATION/REPLACEMENT ......................................... 4-5

OPERATING INSTRUCTIONS .................................................... 5-8

°C / °F TEMPERATURE UNIT SETTING ...................................... 6

REFERENCE TEMPERATURE SETTING & MEASUREMENT ....................... 6

EMISSIVITY ADJUSTMENT ............................................... 7-8

CLEANING AND STORAGE ...................................................... 9

SPECIFICATIONS ............................................................. 9

1 YEAR LIMITED WARRANTY ................................................... 10

FCC INFORMATION ........................................................... 10

INTENDED USE

This product is intended for consumer use only. It is designed to be used for non-contact temperature measurement
by measuring the amount of infrared energy radiated from the object’s surface.

GENERAL SAFETY RULES

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions in this manual may result in severe personal injury or death. Keep this manual and refer to it
for Safety Instructions, Operating Procedures and Warranty.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in death or serious
injury.

CAUTION indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.

This product contains chemicals known to the State of California to cause
cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.

1

LASER SAFETY

Pointing a laser and interfering with the operation
of an aircraft is a felony punishable by fine and
imprisonment.

The laser guide used in the tool is Class II.

The laser shall be used and maintained in accor­dance with the manufacturer’s instructions.

The use of optical instruments with this product
will increase eye hazard.

Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.

Do not stare into the laser beam.

Never aim the beam at any person or an object other than the work piece.

Avoid indirect exposure via reflective surfaces, such as glass and mirrors.

Store out of reach of children. Equipment should be in a high location or locked up to keep out of reach

of children. It is not a toy.

Do not tamper with the laser output. Changing the performance of the laser to increase its output
is prohibited. Any claim for damages or injuries resulting from not following these instructions will be
refused.

Never operate laser if the unit is defective or the cover or seal is damaged.
There are no user-serviceable parts in the laser device. The laser unit must be returned to the

factory for any service or repair. Service or repair must be handled by authorized factory trained techni­cians.

Be careful with this tool. Striking or jarring it, especially on the laser housing can affect its accuracy.

TOOL USE AND CARE

Use the product only as specified in this manual.

Avoid exposing this device to EMF (electro-magnetic fields) from arc welders, induction
heaters, etc. OR exposing to static electricity.

To prevent sensor damage, do not point the sensor lens directly at the sun or any other
source of strong infrared light.

AVOID EXPOSURE

CAUTION

Laser Radiation is emitted from this aperture

DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS

LASER RADIATION

1 MW MAX OUTPUT AT 630-670 NM
CLASS II LASER PRODUCT

DIODE LASER

Complies with FDA 21CFR, 1040.10 & 1040.11

0601000040

Made in China

Serial No:

XXXXXXXXX

Alltrade Tools LLC

IR Thermometer Label

2

Do not leave the thermometer on or near objects of high temperature exceeding 158°F.

Be certain there is no condensation on the lens prior to taking measurements. Allow 10
minutes for condensation to dissipate as needed.

Shiny surfaces result in lower than actual temperature measurements.

For the most accurate temperature measurements, aim the infrared thermometer perpen­dicular to the target.

The IR thermometer cannot measure through transparent surfaces such as glass and plastic.
It will measure the surface temperature instead.

Steam, dust, smoke and/or vapours can prevent accurate measurement by obstructing the
unit’s optics. For better accuracy, keep the sensor perfectly clean.

Refer to the spot size information on the instrument (and in the manual) for the target spot
size being measured at a given distance.

FUNCTIONAL DESCRIPTION

3

LCD

Laser
pointer

Infrared
(Fresnel)
lens &
Sensor

Battery
housing
cover

Trigger

Shift
Left
Button

2 AA batteries

Set Button

Shift Right
Button