Varytec Theaterspot Pro 300 fresnel, Theaterspot Pro 500 fresnel User Manual

User’s manual

Theaterspot Pro 300/500 fresnel/antihalo

2 / 5

Table of content

1. Safety instructions........................................................................................................................... 3

2. Applications..................................................................................................................................... 4

3. Function..........................................................................................................................................4

Angle....................................................................................................................................................4

4. Install or Change the lamp..............................................................................................................4

Focus ................................................................................................................................................... 4

5. Note ................................................................................................................................................ 4

6. Technical parameter:...................................................................................................................... 4

3 / 5

1. Safety instructions

FOR SAFE AND EFFICIENT OPERATION

Be careful with heat and extreme temperatureAvoid exposing it
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.

Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.

Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.

To avoid placing on un-stable location
Select a level and stable location to avoid vibration.

Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.

If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.

Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
be sure to disconnect the plug from the receptacle

.

4 / 5

2. Applications

Stage, TV station, theatre, exhibition, saloon, auditoria, gymnasium, etc.

3. Function

face light, top light, ear light or long distance soft light, centralized light, back light, side light, effect

light, etc.

Angle

Can install in any angle

4. Install or Change the lamp

Make sure the power is off before install or change the lamp. Loose the 2-M4 safe scre w with
screwdriver. And then press down and go round the outside quincunx screw 90°to open the bottom
cover. At last pull out the lamp and change the lamp vertically.

Focus

Loose the quincunx screw in the center of bottom cover and adjust focus from front to back. Please
tighten the screw after adjusting.

5. Note

1.Lens, reflector ,or lamp holder support with breakage should not be used any more. Cut off the

power and change it.

2.Don’t use the damaged protective net. Make sure the parts are very well before installation.

3.The damaged or deformed lamp should be changed prompt. Do not touch the bulb directly with

hand. Use the alcoholic cloth to brush fingerprint.

4.Using the same model lamp to replace the used one.

5.Clean the light periodically.

6.Make sure the light is hung safely. Check firmware and screw periodically.

7.Please contact our factory if the magnetic base, socket or plug is oxygenated (black oxygenation).

Can be used only after changing.

8.The groundwire should touch the earth when installing the light.

9.Qualified personnel carry out installation, repairs, and maintenance.

6. Technical parameter:

Model: A/B- 05PC/AN/FR
Power supply: AC220V±10%/50-60Hz
Light sources: Tungsten Halogen 220V 300/ 500W GY9.5
Size:310mm×270mm×220mm

★ Weight: 4.5 Kg

5 / 5

Importeur:

B & K Braun GmbH

Industriestraße 1

D-76307 Karlsbad

www.bkbraun.com

[e-mail]