Varytec Strobe Mini LED20 User Manual

Manual
Strobe Mini LED20
2 / 12
Table of contents
1. Safety instructions ............................................................................................................................ 3
1.1. FOR SAFE AND EFFICIENT OPERATION ............................................................................ 3
1.2. Further safety instructions ....................................................................................................... 4
2. Introduction ....................................................................................................................................... 9
3. Connections ..................................................................................................................................... 9
3.1. Electrical connections .............................................................................................................. 9
3.2. DMX connections .................................................................................................................... 9
3.3. DMX connection with terminator.............................................................................................. 9
4. Control ............................................................................................................................................ 10
4.1. Structure of the menu ............................................................................................................ 10
5. DMX Chart ...................................................................................................................................... 10
6. Technical data ................................................................................................................................ 11
3 / 12
1. Safety instructions
This device is suitable for indoor use (not outdoors) only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
Use only fuses of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
1.1. FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /35°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust. Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not using the device for an extended period of time, be sure to disconnect the plug from the receptacle
.
Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified perso
connections have to be carried out according to the European safety standards.
1.2.
Further safety instructions
IMPORTANT
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
a
ccept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
the European safety standards.
IMPORTANT
Keep
away from water and humidity!
Make sure to unplug the power supply before opening the housing!
Please read careful through this manual before the first start
All persons which are entrusted with installation, start
device have to:
Show a corresponding competence.
Follow the lines of this manual.
Face this manual as part of the product.
Keep this manual over the lifetime of the product.
Pass this manual to new owners of the device.
Download the latest version of the manual.
Safety-related red flags
IMPORTANT!
Handle with the dangerous electric voltages carefully.
With this voltage there is the danger to get a life
Always observe
After taken the
device from a cold room to a warm room, it is not allowed to activate the device.
It is possible that thereby emerged condensed water damages the device. Activate the device not until
it reached ambient temperature.
4 / 12
nnel. All electrical and mechanical
-up.
-
up, operation, maintenance and
-
threatening electric shock.
repair of this
Loading...
+ 8 hidden pages