LED Ball RGBW
50cm 4x8W DMX
User manual
LED ball
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
28.06.2019, ID: 460236
Table of contents
Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 17
4 Installation.................................................................................................................................................. 18
5 Starting up.................................................................................................................................................. 20
6 Connections and controls................................................................................................................... 22
7 Operating.................................................................................................................................................... 27
7.1 Starting the device........................................................................................................................... 27
7.2 System settings................................................................................................................................. 27
7.3 Stand-alone mode........................................................................................................................... 35
7.4 DMX operation.................................................................................................................................. 41
7.5 Menu overview................................................................................................................................. 43
LED Ball RGBW 50cm 4x8W DMX
LED ball
3
Table of contents
7.6 Functions in 2-channel DMX mode........................................................................................... 46
7.7 Functions in 3-channel DMX mode........................................................................................... 46
7.8 Functions in 4-channel DMX mode........................................................................................... 49
7.9 Functions in 7-channel DMX mode........................................................................................... 49
7.10 Functions in 9-channel DMX mode........................................................................................ 52
7.11 Functions in 14-channel DMX mode...................................................................................... 56
8 Technical specications....................................................................................................................... 60
9 Plug and connection assignments.................................................................................................. 63
10 Troubleshooting...................................................................................................................................... 64
11 Cleaning....................................................................................................................................................... 66
12 Protecting the environment.............................................................................................................. 67
LED Ball RGBW 50cm 4x8W DMX
4
LED ball
LED Ball RGBW 50cm 4x8W DMX
LED ball
5
General information
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
LED Ball RGBW 50cm 4x8W DMX
6
LED ball
1.1 Further information
General information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Online guides
Personal consultation For personal consultation please contact our technical hotline.
Service
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Our online guides provide detailed information on technical basics
and terms.
If you have any problems with the device the customer service will
gladly assist you.
LED Ball RGBW 50cm 4x8W DMX
LED ball
7
General information
1.2 Notational conventions
This manual uses the following notational conventions:
Letterings
Displays
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
LED Ball RGBW 50cm 4x8W DMX
8
LED ball
General information
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
LED Ball RGBW 50cm 4x8W DMX
LED ball
9
General information
Warning signs Type of danger
Warning – danger zone.
LED Ball RGBW 50cm 4x8W DMX
10
LED ball
2 Safety instructions
Safety instructions
Intended use
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
LED Ball RGBW 50cm 4x8W DMX
LED ball
11
Safety instructions
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
LED Ball RGBW 50cm 4x8W DMX
12
LED ball
Safety instructions
DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or re. If in doubt, seek advice from a registered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
LED Ball RGBW 50cm 4x8W DMX
LED ball
13
Safety instructions
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
LED Ball RGBW 50cm 4x8W DMX
14
LED ball
Safety instructions
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
LED Ball RGBW 50cm 4x8W DMX
LED ball
15
Safety instructions
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
LED Ball RGBW 50cm 4x8W DMX
16
LED ball
3 Features
Features
n LED ball made of PVC, diameter: 50 cm
n 2 eyelets M10 as suspension and for securing
n 4 × RGBW LEDs, each 8 W
n Control via DMX (six dierent modes), included IR remote control and via buttons and dis‐
play on the unit
n Master / Slave function
n Automatic mode and sound control
n 2 built-in programmes with selectable speed and brightness
n static colour macros with adjustable brightness
n ideal for ambient lighting in clubs, bars and for events
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
LED Ball RGBW 50cm 4x8W DMX
LED ball
17
Installation
4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device hanging from the ceiling.
LED Ball RGBW 50cm 4x8W DMX
18
LED ball
Installation
Inserting the battery into the
remote control
Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to rst use.
LED Ball RGBW 50cm 4x8W DMX
LED ball
19
Starting up
5 Starting up
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
LED Ball RGBW 50cm 4x8W DMX
20
LED ball
Starting up
Connections in DMX mode
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the rst DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).
LED Ball RGBW 50cm 4x8W DMX
LED ball
21
Connections and controls
6 Connections and controls
LED Ball RGBW 50cm 4x8W DMX
22
LED ball
Loading...