User manual
FLATBEAM DUO 48x8W
RGBW
2 / 21
Table of contents
1. Safety instructions ............................................................................................................................ 4
1.1. FOR SAFE AND EFFICIENT OPERATION ............................................................................ 4
2. Before usage .................................................................................................................................... 5
2.1. Carton ...................................................................................................................................... 5
2.2. Unpacking ................................................................................................................................ 5
2.3. AC Power ................................................................................................................................. 5
3. Introduction ....................................................................................................................................... 5
3.1. Features ................................................................................................................................... 5
3.2. DMX Channel summery .......................................................................................................... 6
3.3. Product Overview .................................................................................................................... 7
4. Setup ................................................................................................................................................ 8
4.1. Power Supply........................................................................................................................... 8
4.2. Mounting .................................................................................................................................. 8
4.3. Fixture linking........................................................................................................................... 9
4.3.1. Data Cabeling .................................................................................................................. 9
4.3.2. DMX data cable ............................................................................................................... 9
4.3.3. Cable Connectors .......................................................................................................... 10
4.3.4. 3 Pin to 5 Pin conversion chart ...................................................................................... 10
4.3.5. Setting up a DMX serial data link .................................................................................. 10
4.3.6. Master Slave fixture linking ............................................................................................ 11
5. Operating Instructions .................................................................................................................... 11
5.1. Control Options ...................................................................................................................... 11
5.2. Flatbeam Control Quick setup ............................................................................................... 11
5.3. DMX 512 control without ID addresses ................................................................................. 11
5.4. DMX addressing with ID address .......................................................................................... 12
5.5. Setting the DMX address ....................................................................................................... 12
5.6. Control Panel Functions ........................................................................................................ 12
5.6.1. Static Colour .................................................................................................................. 14
5.6.2. Auto ............................................................................................................................... 14
5.6.3. Run ................................................................................................................................ 14
5.6.4. DMX ............................................................................................................................... 14
5.6.5. Personality ..................................................................................................................... 14
5.6.6. ID ................................................................................................................................... 15
5.6.7. Edit custom .................................................................................................................... 15
3 / 21
5.6.8. Setting ............................................................................................................................ 15
5.6.9. RGbW White adjust ....................................................................................................... 16
5.6.10. CAL1 .............................................................................................................................. 16
5.6.11. CAL2 .............................................................................................................................. 16
5.6.12. Key Lock ........................................................................................................................ 16
5.7. DMX 512 channel values ....................................................................................................... 17
6. DMX Primer .................................................................................................................................... 20
4 / 21
1. Safety instructions
• This device is suitable for indoor use only.
• All modifications to the device will void the warranty.
• Repairs are to carry out by skilled personnel only.
• Use only fuses of the same type and original parts as spare parts.
• Protect the unit from rain and humidity to avoid fire and electric shocks.
• Make sure to unplug the power supply before opening the housing.
1.1. FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the device for an extended period of time, be sure to
disconnect the plug from the receptacle
.
5 / 21
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
2. Before usage
2.1. Carton
1 x Flatbeam Duo
1 x Power Cable with Plug
1 x DMX Input Cable
1 x User Manual
2.2. Unpacking
Every Flatbeam Duo has been thoroughly tested and has been transported in perfect operating
condition. Carefully check the carton for damages that may have occurred during the transport. If
the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all
accessories necessary to operate the unit has arrived intact.
2.3. AC Power
This fixture has an auto-switching power supply that can accommodate a wide range of input
voltages. The only thing necessary to do before powering on the unit is to make sure the line
voltage you are applying is within the range of accepted voltage. This fixture will accommodate
between 100V and 240V AC 50~60Hz. All fixtures must be powered directly off a switched circuit
and cannot be run off a rheostat.
3. Introduction
3.1. Features
- 3, 4, 5, 6 or 11 Channel DMX 512 Control Operating Modes.
3 Channel = RGB control
3 Channel = HSV control (hue, saturation and value)
4 Channel = RGB, Dimmer
4 Channel = RGBW Control
5 Channel = RGBW Dimmer
6 Channel = RGBW Dimmer Strobe
11 Channel = RGBW, ID, dimmer, strobe, autospeed, auto, custom programs, aso.
- Light source 48 x 8W 4in1 High Power Leds
- Lens: 51° Standard Lens
- Material: aluminum body
- Protection Rating: IP67
- Power Consumption: 400W
6 / 21
- Voltage: 100V – 240V 50Hz~60Hz
- Power supply: built in and auto switching
- Size: 508 x 196 x 533mm
- Net weight: 23kg
3.2. DMX Channel summery
The Flatbeam has a total of 7 DMX channel configurations, referred to as “personalities” in this
manual and in the fixture onboard control board. The 7 personalities are STAG, Arc1, Ar1.D, Arc2,
Ar2.d, Ar2.s and HSV. Each of the different personalities can be accessed from the control panel.
Please see section about Control Panel Functions for a description and how to accomplish that.
STAG Channel Description
1 Dimmer
2 Red (set the step time when pr. 01~10 is set)
3 Green (set the fade time when pr. 01~10 is set)
4 Blue
5 White
6 Color change / white balance
7 Strobe
8 Auto / custom programme
9 Speed of Auto
10 Dimmer speed
11 ID Address
Arc.1 Channel Description
1 Red
2 Green
3 Blue
Ar.1d Channel Description
1 Dimmer
2 Red
3 Green
4 Blue
Arc.2 Channel Description
1 Red
2 Green
3 Blue
4 White
7 / 21
Ar.2d Channel Description
1 Dimmer
2 Red
3 Green
4 Blue
5 White
Ar.2s Channel Description
1 Dimmer
2 Red
3 Green
4 Blue
5 White
6 Strobe
HSV Channel Description
1 Hue
2 Saturation
3 Value (Brightness)
3.3. Product Overview
Loading...