Page 1
Easy Move XS HP
Wash 7x8W RGBW
moving head
User manual
Page 2
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
18.10.2017, ID: 301511
Page 3
Table of contents
1 General notes............................................................................................................................................... 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions.................................................................................................................................. 10
3 Features....................................................................................................................................................... 17
4 Installation.................................................................................................................................................. 18
5 Starting up.................................................................................................................................................. 21
6 Connections and controls................................................................................................................... 24
7 Operating.................................................................................................................................................... 27
7.1 Starting the device........................................................................................................................... 27
7.2 Operating modes............................................................................................................................. 28
7.3 System settings................................................................................................................................. 30
7.4 Menu overview................................................................................................................................. 33
7.5 Functions in 8-channel DMX mode........................................................................................... 34
Table of contents
Easy Move XS HP Wash 7x8W RGBW
3
moving head
Page 4
7.6 Functions in 13-channel DMX mode........................................................................................ 35
8 Technical specifications....................................................................................................................... 39
9 Plug and connection assignments.................................................................................................. 40
10 Troubleshooting...................................................................................................................................... 41
11 Cleaning....................................................................................................................................................... 43
12 Protecting the environment.............................................................................................................. 44
Table of contents
4
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 5
1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
Easy Move XS HP Wash 7x8W RGBW
5
moving head
Page 6
1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search
Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service
If you have any problems with the device the customer service will
gladly assist you.
General notes
6
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 7
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General notes
Easy Move XS HP Wash 7x8W RGBW
7
moving head
Page 8
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos-
sible dangerous situation that can result in death or serious
injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos-
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos-
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
General notes
8
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 9
Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
Easy Move XS HP Wash 7x8W RGBW
9
moving head
Page 10
2 Safety instructions
This device is intended to be used as moving-head spotlight. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this
user manual. Any other use or use under other operating conditions is considered to be
improper and may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
10
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 11
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
Easy Move XS HP Wash 7x8W RGBW
11
moving head
Page 12
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
12
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 13
WARNING!
Risk of injury by falling off
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
The carrying capacity of the truss or other mounting must be sufficient for the
intended number of devices. Note that the movement of the head may additionally stress the load-bearing structures.
Safety instructions
Easy Move XS HP Wash 7x8W RGBW
13
moving head
Page 14
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright
light. This is also valid immediately after you turn on the device, when the device
operates in automatic mode or under remote control and when you turn off a
DMX controller that is connected to the device. Persons staying near the device
could be injured or frightened.
Before you turn on the device and during the operation, always ensure that
nobody stays close to the device. If work has to be performed in the area of movement or in the near vicinity of the device, it must remain turned off.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
14
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 15
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
The device must not be moved while it is in use.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
Easy Move XS HP Wash 7x8W RGBW
15
moving head
Page 16
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
Safety instructions
16
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 17
3 Features
Compact and powerful moving head for small venues and mobile use.
Special features of the device:
n
7 × RGBW LEDs (each 8 W)
n
Control via DMX (seven or twelve channels) as well as buttons and display on the unit
n
Auto mode with eight preprogrammed show programmes
n
Sound control with eight preprogrammed show programmes
n
Master/Slave mode
n
Strobe effect
n
Movement resolution 8 Bit or 16 Bit
Features
Easy Move XS HP Wash 7x8W RGBW
17
moving head
Page 18
4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Lift the device only at the base. When lifted at the rotatable mounting, the device may be damaged.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Installation
18
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 19
WARNING!
Risk of injury by falling off
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
The carrying capacity of the truss or other mounting must be sufficient for the
intended number of devices. Note that the movement of the head may additionally stress the load-bearing structures.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
Easy Move XS HP Wash 7x8W RGBW
19
moving head
Page 20
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or amplifiers.
Installation
20
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 21
5 Starting up
Establish all connections as long as the unit is switched off. Use the shortest possible highquality cables for all connections.
Starting up
Easy Move XS HP Wash 7x8W RGBW
21
moving head
Page 22
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).
The flashing ‘DMX’ LED indicates an incoming DMX signal.
Connections in DMX mode
Starting up
22
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 23
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
Connections in master/slave
mode
Starting up
Easy Move XS HP Wash 7x8W RGBW
23
moving head
Page 24
6 Connections and controls
Connections and controls
24
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 25
1 Spotlight head with LEDs.
2 Display with function buttons.
[MODE/ESC]
Activates the main menu and toggles between menu items. Closes an opened submenu.
[UP]
Increases the displayed value by one.
[DOWN]
Decreases the displayed value by one.
[ENTER]
Selects an option of the respective operating mode.
3 [POWER / FUSE]
IEC chassis plug for power supply with fuse holder.
Connections and controls
Easy Move XS HP Wash 7x8W RGBW
25
moving head
Page 26
4 [INPUT]
DMX input
5 [OUTPUT]
DMX output
Connections and controls
26
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 27
7 Operating
7.1 Starting the device
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright
light. This is also valid immediately after you turn on the device, when the device
operates in automatic mode or under remote control and when you turn off a
DMX controller that is connected to the device. Persons staying near the device
could be injured or frightened.
Before you turn on the device and during the operation, always ensure that
nobody stays close to the device. If work has to be performed in the area of movement or in the near vicinity of the device, it must remain turned off.
Connect the device to the power supply to start operation. After a few seconds, the fans start
to work, the head moves to the home positions for rotation (pan) and inclination (tilt), the
screen displays a start message. After a few more seconds, the device operates in the last set
mode.
Operating
Easy Move XS HP Wash 7x8W RGBW
27
moving head
Page 28
7.2 Operating modes
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting takes effect only when the device is not
operated under DMX control.
Press [MODE/ESC] repeatedly until the display shows ‘NAFA’ or ‘NAFL’. Use [UP] or [DOWN] to
toggle between the both options ‘NAFA’ (fast auto mode) and ‘NAFL’ (slow auto mode).
Confirm with [ENTER]. Depending on the sub mode the display shows ‘Fast’ (fast auto mode)
or ‘SloU’ (slow auto mode). To close the sub menu and the main menu without making
changes, press [MODE/ESC] or wait for several seconds.
Sound control can only be activated when the unit is operating in stand alone mode or as
master in a master / slave combination. This setting takes effect only when the device is not
operated under DMX control. In this operating mode, the device responds to acoustic pulses
which are recorded by the integrated microphone.
Press [MODE/ESC] repeatedly until the display shows ‘NStS’ . Confirm with [ENTER]. The display
shows ‘SrUn’ , the unit is now in sound control mode.
To close the sub menu and the main menu without making changes, press [MODE/ESC] or wait
for several seconds.
Auto mode
Sound control
Operating
28
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 29
This setting takes effect only when the device is not operated under DMX control.
Press [MODE/ESC] repeatedly until the display shows ‘SLAu’ . Confirm with [ENTER]. The display
shows ‘Son’ , the unit is now in slave mode.
To close the sub menu and the main menu without making changes, press [MODE/ESC] or wait
for several seconds.
Press [MODE/ESC] repeatedly until the display shows ‘8CH’ or ‘13CH’. Use [UP] or [DOWN] to
toggle between the both options ‘8CH’ (five channels) and ‘13CH’ (twelve channels).
Make sure that the DMX address matches the configuration of your DMX controller. The following table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
8 channels 505
13 channels 500
Confirm with [ENTER]. To close the sub menu and the main menu without making changes,
press [MODE/ESC] or wait for several seconds.
Slave mode
DMX mode
Operating
Easy Move XS HP Wash 7x8W RGBW
29
moving head
Page 30
7.3 System settings
This menu can be used to set the maximum rotation angle.
Press [MODE/ESC] repeatedly until the display shows ‘PA18’ , ‘PA36’ or ‘PA54’. Use [UP] or
[DOWN] to toggle between the available options.
n ‘PA18’ , maximum rotation angle 180°
n
‘PA36’ , maximum rotation angle 360
°
n
‘PA54’ , maximum rotation angle 540
°
Confirm with [ENTER]. To close the sub menu and the main menu without making changes,
press [MODE/ESC] or wait for several seconds.
This menu can be used to set the maximum inclination angle.
Press [MODE/ESC] repeatedly until the display shows ‘t.9’ or ‘t.18’. Use [UP] or [DOWN] to
toggle between the available options.
n ‘t.9’ , maximum inclination angle 90°
n
‘t.18’ , maximum inclination angle 180
°
Confirm with [ENTER]. To close the sub menu and the main menu without making changes,
press [MODE/ESC] or wait for several seconds.
Maximum rotation angle
Maximum inclination angle
Operating
30
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 31
Press [MODE/ESC] repeatedly until the display shows ‘Pan’ or ‘rPan’. Use [UP] or [DOWN] to
toggle between the available options.
n ‘Pan’ , normal rotation direction
n
‘rPan’ , reversed rotation direction
Confirm with [ENTER]. To close the sub menu and the main menu without making changes,
press [MODE/ESC] or wait for several seconds.
Press [MODE/ESC] repeatedly until the display shows ‘t.L’ or ‘rt.L’. Use [UP] or [DOWN] to toggle
between the available options.
n ‘t.L’ , normal tilt direction
n
‘rt.L’ , reversed tilt direction
Confirm with [ENTER]. To close the sub menu and the main menu without making changes,
press [MODE/ESC] or wait for several seconds.
Reverse pan
Reverse tilt
Operating
Easy Move XS HP Wash 7x8W RGBW
31
moving head
Page 32
Press [MODE/ESC] repeatedly until the display shows ‘d.s’ or ‘rd.s’. Use [UP] or [DOWN] to
toggle between the available options.
n ‘d.s’ , normal display
n
‘rd.s’ , inverted display
Confirm with [ENTER]. To close the sub menu and the main menu without making changes,
press [MODE/ESC] or wait for several seconds.
Press [MODE/ESC] repeatedly until the display shows ‘rEST’ . Confirm with [ENTER] to reset the
user settings.
Press [MODE/ESC] repeatedly until the display shows ‘LoAD’ . Confirm with [ENTER] to reset the
unit to factory defaults.
Invert the display
Resetting user settings
Reset to factory defaults
Operating
32
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 33
7.4 Menu overview
Operating
Easy Move XS HP Wash 7x8W RGBW
33
moving head
Page 34
7.5 Functions in 8-channel DMX mode
Channel Value Function
1 0…255 Rotation (pan)
2 0…255 Inclination (tilt)
3 0…7 all LEDs off
8…134 Dimmer (0 % to 100 %)
135…239 Strobe effect (0 Hz to 40 Hz)
240…255 open
4 0…255 Intensity red (0 % to 100 %)
5 0…255 Intensity green (0 % to 100 %)
6 0…255 Intensity blue (0 % to 100 %)
7 0…255 Intensity white (0 % to 100 %)
8 0…255 Increasing rotation and inclination speed
Operating
34
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 35
7.6 Functions in 13-channel DMX mode
Channel Value Function
1 0…255 Rotation (pan)
2 0…255 Fine adjustment rotation (pan)
3 0…255 Inclination (tilt)
4 0…255 Fine adjustment inclination (tilt)
5 0…255 Increasing rotation and inclination speed
6 0…7 all LEDs off
8…134 Dimmer (0 % to 100 %)
135…239 Strobe effect (0 Hz to 40 Hz)
240…255 open
7 0…255 Intensity red (0 % to 100 %)
8 0…255 Intensity green (0 % to 100 %)
Operating
Easy Move XS HP Wash 7x8W RGBW
35
moving head
Page 36
Channel Value Function
9 0…255 Intensity blue (0 % to 100 %)
10 0…255 Intensity white (0 % to 100 %)
11 Basic colours
1…15 Red
16…63 Yellow
64…79 Green
80…127 Cyan
128…143 Blue
144…175 Purple
176…191 Bright blue
192…223 White
106…119 Pink
224…237 Colour fade, increasing speed
Operating
36
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 37
Channel Value Function
238…255 Colour change, increasing speed
12 Auto and Sound programmes
0…7 No function
8…22 Auto programme 1
23…37 Auto programme 2
38…53 Auto programme 3
54…67 Auto programme 4
68…82 Auto programme 5
83…97 Auto programme 6
98…112 Auto programme 7
113…127 Auto programme 8
128…142 Sound programme 1
143…157 Sound programme 2
Operating
Easy Move XS HP Wash 7x8W RGBW
37
moving head
Page 38
Channel Value Function
158…172 Sound programme 3
173…187 Sound programme 4
188…202 Sound programme 5
203…217 Sound programme 6
218…232 Sound programme 7
233…255 Sound programme 8
13 0…254 No function
255 Reset
Operating
38
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 39
8 Technical specifications
Illuminant 7 × 4-in-1-LED RGBW, 8 W each
Number of DMX channels 8 or 13 channels
Operating supply voltage
AC 230 V 50 Hz
Power consumption 75 W
W × D × H 177 mm × 238 mm × 176 mm
Weight 5 kg
Technical specifications
Easy Move XS HP Wash 7x8W RGBW
39
moving head
Page 40
9 Plug and connection assignments
This chapter will help you select the right cables and plugs to connect your valuable equipment so that a perfect light experience is guaranteed.
Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug
fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a
short circuit or ‘just’ a not working light show!
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for the pin assignment of a suitable XLR plug.
Pin Configuration
1 Ground, shielding
2 Signal inverted (DMX–, ‘cold signal’)
3 Signal (DMX+, ‘hot signal’)
Introduction
DMX connections
Plug and connection assignments
40
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 41
10 Troubleshooting
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or amplifiers.
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Troubleshooting
Easy Move XS HP Wash 7x8W RGBW
41
moving head
Page 42
Symptom Remedy
The unit does not work, no light,
the fan does not run
Check the mains power connection and the main fuse.
No response to DMX controller 1. The LED ‘DMX’ should be flashing on data transmis-
sion. If it doesn't, check the DMX connectors and cables
for proper connection.
2. If the LED ‘DMX’ lights up without response, check the
address settings and DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside
to high voltage cables that may cause damage or inter-
ference to DMX interface circuits.
If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at www.thomann.de.
Troubleshooting
42
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 43
11 Cleaning
Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the
light output. The frequency of cleaning depends on the operating environment: wet, smoky or
particularly dirty surroundings can cause more accumulation of dirt on the optics of the
device.
n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n
Always dry the parts carefully.
The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before
cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lintfree damp cloth for cleaning. Never use solvents or alcohol for cleaning.
Optical lenses
Fan grids
Cleaning
Easy Move XS HP Wash 7x8W RGBW
43
moving head
Page 44
12 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE). Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Disposal of the packaging material
Disposal of your old device
Protecting the environment
44
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 45
Notes
Easy Move XS HP Wash 7x8W RGBW
45
moving head
Page 46
Notes
46
Easy Move XS HP Wash 7x8W RGBW
moving head
Page 47
Page 48
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
Loading...