Page 1
Solutions for Demanding Applications
All Weather Series
VT084XA4 · VT084XB4
LCD Monitors
User’s Guide
VT084 All Weather User’s Guide 150-181
1
Page 2
Table Of Contents
Read these instructions completely before attempting to operate your new LCD Color Display.
Section 1 Introduction
1.0 Overview 3 4.1 Touch Screen Introduction 11
1.1 VT084 General Features 3 4.2 Touch Screen Installation 11
1.2 Product Safety Precauti ons 3
Section 2 Displa y Setup Section 5 Troubleshooting
2.1 Inspection 4 5.1 General 12
2.2 Unpacking 4
2.3 Included Parts 4 Section 6 Maintenance
2.4 Installation Guidelines 4-5 6.1 Cleaning 13
2.5 Video Input Connections 6
Section 3 Getting Started
3.1 Adjusting the display 7 Mechanical Drawings 16-17
3.2 OSD Adjustments 8-10
Page
Section 4 Touchscreen
Specifications 14-15
Page
VT084 All Weather User’s Guide 150-181
2
Page 3
INTRODUCTION
SECTION 1
1.1 Overview
VarTech All-Weather series includes waterproof, totally sealed, IP67 NEMA 6 LCD displays. These high resolution,
sunlight readable LCD displays provide exceptional clarity, viewing angles, extensive operational temperatures
(-40°C to +70°C), IP67 (NEMA 6) protection, and offer durable, 5-Wire, resistive touch screens.
1.2 VT084 General Features
o IP67 Fully Enclosed LCD
o Rugged Machined 6061 T6 Aluminum Enclosure
o Solid State LED Backlightin g
o Optical Bonding (VBOND) front overlay (AR)
o Optional Resistive Touch Screens, standard and Armor
o VESA, Flush, RAM, and Panel Mounting Options
o Full Range Manual Dimming
o Push Button OSD (On-Screen Display)
1.3 Product Safety Precautions
• Ensure that sufficient space is available around the display to provide the circulation necessary for cooling.
• Ensure that the ambient air temperature will not exceed the specified maximum temperature.
• Do not attempt to service this display yourself. The rear chassis has a seal so that non qualified personnel
will not expose themselves to dangerous voltages or other risks.
• To protect from electrical shock, unplug the display power supply from the wall before moving.
• Do not place any heavy objects on the power cords. Damage may cause electrical shock.
• Unplug the power supply from the wall or unit if one of the following conditions exists:
Power cord or plug is damaged or frayed.
The display does not operate normally when the operating instructions are followed.
The display has been dropped or the enclosure has been damaged.
The display exhibits a distinct change in performance, indicating a need for service.
VT084 All Weather User’s Guide 150-181
3
Page 4
DISPLAY SETUP
SECTION 2
2.1 Inspection of your VT084 All Weather Display
The Vartech VT084 All Weather display is supplied with different accessories depending on the model
configuration purchase d. Verify that the display and accessories are what were ordered. Contact your Vartech
salesperson should there be any discrepancies.
2.2 Unpacking and setting up your VT084 All Weather Display
Before unpacking the product, inspect the shipping carton for damage. If damage is visible, immediately contact
VarTech and request assistance. Oth erwise, proceed with unpacking. Keep the original packing material in case
you need to return the product for repair or transport it to another location. Use both the inner and outer packing
cartons to provide adequate protection for a unit returned for service.
Your display monitor package will consist of all or some of the components listed below. Open shipping
container and place all the components on a flat clean surface.
2.3 What is included with your VT084 All Weather Display
Installation instructions and cutout template
Panel Mount Screws
Four VESA or RAM mounting screws
Power cable and AC adapter if ordered
Video cable for input ordered (VGA, DVI, BNC)
Touch Interface Cable, Serial or USB (Optional when touch is installed)
CDROM with Touch Screen Drivers (Optional when touch is installed)
2.4 Installation Guidelines
Panel Mounting Guidelines
Observe these guidelines when installing the monitor in a panel.
Cut supporting panels to specifications before installation. Take precautions so metal cuttings do not enter
components already installed in the panel.
Supporting panels should be at least .125” thick in order to provide proper sealing against water and dust and
to provide proper support.
Install the monitor into the panel be careful not to cut hand on metal. Use .125” thick supplied gasket to ensure a
watertight seal. Do not use an adhesive.
Tighten the provided bolts. Do not over tighten as that can damage the helicoil inserts.
VT084 All Weather User’s Guide 150-181
4
Page 5
Mechanical Drawings
Model
Description
Page(s)
VT084XA4/XB4
VESA/RAM Mount Drawing
16
VT084XA4/XB4
Flush Mount
17
VESA Mounting Guidelines
The VESA-mount option is used to install the monitor on an articulated arm using an optional bracket. For
a list of available mounts, please contact your Vartech salesperson.
Mounting Guidelines
Observe these guidelines when installing the monitor on an arm.
The mounting surface and the mounting arm must be strong enough to support both the monitor and the
mounting hardware.
The interface between the arm and the monitor must meet VESA FPMPMI 100 mm standards.
The mounting location must provide adequate clearance for positioning and moving the adjustable unit and
routing cables.
Mount the Monitor on a VESA Interface
Follow these steps to mount the monitor on a VESA interface.
1. Mount the arm to the VESA interface with screws, bolts, or clamps so the monitor cannot tip.
2. Align the monitor over the arm and insert four supplied screws through the arm bracket and into the monitor.
RAM Mounting Guidelines
RAM is the only universal ball-and-socket system that holds excessive amounts of weight in high vibration
applications for military, commercial and private use.
Mounting Guidelines
Observe these guidelines when installing the monitor on the provided RAM.
The mounting surface must be strong enough to support both the monitor and the RAM.
The mounting location must provide adequate clearance for positioning and moving the adjustable unit and
routing cables.
Follow these steps to mount the monitor on a RAM.
1. Mount the Base plate to the mounting surface where the monitor is intended to be permanently mounted
2. Mount the Shaft to the RAM interface by prying open the socket and slipping over the mounting ball.
3. Align the RAM monitor plate, attach using the supplied screws into the 3 RAM mounting holes (triangular
pattern)
4. Loosen the socket and slip the ball into the socket. Secure in place by tightening the socket.
VT084 All Weather User’s Guide 150-181
5
Page 6
2.5 Input Video Connections
Typical Input Assembly
Connect to an Analog Video Source
All of the monitors support analog video. Your monitor is shipped with a high-quality analog video cable.
Use this video cable to connect a computer to the monitor.
Follow these steps to connect the monitor to an analog video source.
1. Connect one end of the 3 m (10 ft), analog video cable to the circular, 10pin VGA video input connector
on the monitor. Careful to align the red lines
2. Connect the other cable end to the VGA port of the computer.
You can use a couple to join to another cable with a maximum combined length of 15 m (50 ft) at lower monitor
resolutions, provided it is a high-quality video cable. Video amplifiers are available for longer distances.
VT084 All Weather User’s Guide 150-181
6
Page 7
On/OFF
Menu
-
+
Select
Input Select
Dimming POT
GETTING STARTED
SECTION 3
3.1 Adjusting the display
Set the monitor type
The VT084XA/XB monitors are not plug n play compatible and require initial setup to begin operation
1. Ensure video and power cables are connected and secure and connected to the source
2. Power on the monitor
3. Toggle through the input select button until your video source is labeled and the video is showing
4. Adjust geometry of screen if necessary by using the advanced On-screen display. Activate the OSD
By pushing the MENU button, move to the necessary sub menus by using the +/- ke ys and enterin g selec t
5. Make adjustments and save by exiting the menu
6. Once the initial setup is complete you will not be required to redo
VT084 All Weather User’s Guide 150-181
7
Page 8
Select the input mode (1280 / 1360 / 1366 / 1368) to recognize and display the correct input
3.2 OSD Adjustments
Selection page
Select input source
Auto Source Seek
Video system selection*
Select input source to Analog RGB
Select input source to DVI
Select input source to S-Vi deo 1
Select input source to Composite 1
Select input source to S-Vi deo 2 (No function now)
Select input source to Composite 2 (No function now)
ON – Auto source select always enable
OFF – Disable auto source select function
Select Auto video system detection
Wide screen mode
information display#
Select PAL video system
Select PAL M video system
Select NTSC video system
Select NTSC 4.43 video system
Select SECAM video system
signal information display on the OSD menu.
1280 : 1280x768 1366: 1366x768
1360 : 1360x768 1368: 1368x768
VT084 All Weather User’s Guide 150-181
8
Page 9
Exit
Exit the OSD menu and save the settings
Brightness and Contrast
Brightness
Increase/decrease brightness level.
Press – or + ( - + ) Total : 256 steps
Contrast
Increase/decrease panel contrast level.
Press – or + ( - + ) Total : 192 steps
Saturation*
Increase/decrease hue level.
Press – or + ( - + ) Total : 256 steps
Hue*
Increase/decrease saturation level
Press – or + ( - + ) Total : 128 steps
Exit
Exit the OSD menu and save the settings
Color
Auto RGB Calibration#
Color Temperature (Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.)
Adjust red color level
Set the color temperature to 4200K
Set the color temperature to 5000K
Set the color temperature to 6500K
Set the color temperature to 7500K
Set the color temperature to 9300K
Gamma adjustment
Adjust Gamma settings (0.4 / 0.6 / 1.0 / 1.6 / 2.2)
Selec t Gamma t o 0.4
Selec t Gamma t o 0.6
Selec t Gamma t o 1.0
Selec t Gamma t o 1.6
Selec t Gamma t o 2.2
Exit
Exit the OSD menu and save the settings
Position#
Auto setup
Auto adjust the positions, phase, frequency
Yes No
Frequency
Adjust the image horizontal size
Phase
Fine tune the data sampling position (adjust image quality)
Image Horizontal Position
Use +/- to move the image horizontally
Image Vertical
Use +/- to move the image vertically
Press – or + ( - + )
Exit
Exit the OSD menu
Yes
Press – or + ( - +) Total :128 steps
Adjust green color level
Press – or + ( - +) Total : 128 steps
Adjust blue color level
Press – or + ( - +) Total : 128 steps
Press SEL UP/ DN button to select item
No
Press – or + ( - + )
VT084 All Weather User’s Guide 150-181
9
Page 10
Utilities
OSD setting
OSD Timeout : 0 / 10 / 20 / 30 / 40 / 50 / 60 seconds (Always on when set to 0)
Press – or + ( - + )
OSD menu horizontal position
Press – or + ( - + )
OSD menu vertical position
Press – or + ( - + )
Load Factory Default
Initialize the setting stored in non-volatile memory
Sharpness
Adjust sharpness level
Exit
Exit the OSD menu
Exit the OSD menu
Press – or + ( - + ) Total : 49 steps
* - Function in Video mode only
# - Function in ARGB mode only
Items marked have sub menus.
Exit the OSD menu to save the setting chosen
Adjust the Brightness
Use the dimming potentiometer located on the front bottom right corner of the display to adjust the brightness level of the
LED backlights.
VT084 All Weather User’s Guide 150-181
10
Page 11
TOUCHSCREEN
SECTION 4
4.1 Introduction
Touch screens are a common means to interface operator inputs to a system. The universal standard of Windows GUI
(Graphical User Interface) has significantly increased the use of touch screens.
The Vartech All Weather series offers two styles of 5 wire resistive technologies. The styles are standard resistive
and the more durable Armor resistive touch.
4.2 Installati on
All Vartech Systems displays configured with a touch screen are supplied with a CDROM which includes user manuals,
application software, and drivers for various operating systems. Insert the supplied CDROM into a CDROM drive and
follow the installation instructions that will appear on the screen.
Technical support is available by contacting Vartech Systems customer support at 800-223-8050.
VT084 All Weather User’s Guide 150-181
11
Page 12
TROUBLESHOOTING
SECTION 5
5.1
General
A general guide to troubleshooting a flat panel display system it is worth considering the system as separate elements,
such as: Controller (jumpers, PC settings) Panel (controller, cabling, connection, panel, PC settings) Backlight (inverter,
cabling,) Cabling Computer system (display settings, operating system) Through step by step cross checking with
instruction manuals and a process of elimination to isolate the problem it is usually possible to clearly identify the
problem area.
No image:
If the panel backlight is not working it may still be possible to just see some image on the display. A lack of
image is most likely to be caused by incorrect connection, lack of power, failure to provide a signal or
incorrect graphic card settings.
Image position:
If it is impossible to position the image correctly, i.e. the image adjustment controls will not move the image far enough,
then test using another graphics card. This situation can occur with a custom graphics card that is not close to standard
timings or if something is in the graphics line that may be affecting the signal such as a signal splitter (please note that
normally a signal splitter will not have any adverse effect).
Image appearance:
A faulty panel can have blank lines, failed sections, flickering or flashing display and
individual pixels, incorrect graphics card refresh rate, resolution or interlaced mode will
probably cause the image to be the wrong size, to scroll, flicker badly or possibly even
no image. Incorrect jumper settings on the controller may cause everything from total
failure to incorrect image. CAUTION: Do not set the panel power input incorrectly.
Sparkling on the display: faulty panel signal cable.
Backlight:
Items to check include: Power input, Controls, cables, and Inverter generally in this order. If half the screen is dimmer
than the other half: Check cabling for the inverter. If adjusting brightness control has no effect the chances are that the
VR rating or method of adjusting brightness is not compatible or correctly connected to the inverter. If system does not
power down when there is a loss of signal
Continued failure:
If unit after unit keeps failing consider and investigate whether you are short circuiting the equipment or doing
something else seriously wrong.
Generally after common sense issues have been resolved we recommend step by step substitution of known working
parts to isolate the problem.
VT084 All Weather User’s Guide 150-181
12
Page 13
MAINTENANCE
SECTION 6
6.1 Cleaning
Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive)
glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated
grit.
Note: The solvent should be applied only to the cloth, and not directly on the monitor screen.
Do not use paper products as they may scratch the surface. To minimize the risk of abrasion, allow the screen to stand
dry. Special care should be taken when cleaning a touch screen or polycarbonate shield that is installed over the screen.
Abrasive and certain chemical cleaners can easily damage the surface. Never use alcoholic or ammoniac cleaners to
clean the polycarbonate shield or a touch screen.
Note: For best results cleaning a monitor with the optional antireflective tempered glass display shield, a solution of
denatured alcohol is recommended to thoroughly clean the display.
Replacing a Line Cord
To avoid shock and fire hazards, the monitor’s power cord should be replaced if the insulation becomes broken or if it
develops a loose internal connection.
Other Maintenance
Qualified service personnel should perform all maintenance, except for the power cord replacement described above.
VT084 All Weather User’s Guide 150-181
13
Page 14
6.709” x 5.031”
170.4mm x 127.8mm
Operating: -20 to 70ºC (optional -40 to 70ºC)
Storage: -40 to 75ºC
Operating: Up to 10,000 ft
Storage: Up to 45,000 ft
SPECIFICATIONS
ENGINEERING SPECIFICA TIONS – VT084XA
Panel Size 8.4” (21cm)
Type Active Matrix Color Thin Film Transistor (TFT)
Native Panel Resolution SVGA
Pixel Format 800 (H) x 600 (V)
Pixel Pitch 0.213 (H) x 0.213 (V) mm
Pixel Arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe
Dot Pitch 0.0071 (H) x 0.213 (V) mm
Active Display Area
Viewing Angle (Left/Right)
Viewing Angle (Up/Down)
Color Gamut 40% (typ.)
Brightness 1200 Nits (typ.)
Contrast Ratio 600:1 (typ.)
Dimming Ratio 5000:1 (min.)
Response Time 25ms (typ.)
Back Lights 1 LED Rail rated 70,000 Hrs.
Video Connectors LEMO IP67
Colors Supported 16,777,216 (8-bit input)
Video Input Analog 0.7v p-p, TTL
Sync Separate H & V, Combined, SOG
Input Voltage 9 to 36VDC (12VDC typ.) – Amperage Draw 2.1A @ 12VDC for 25W
Power consumption 25 Watts (32 Watts with heater)
80/80
80/60
o
(typ.)
o
(typ.)
Temperature
Humidity Operating/Storage: 0 to 100 %NC
Operating Altitude
VT084 All Weather User’s Guide 150-181
14
Page 15
ENGINEERING SPECIFICA TIONS – VT084XB
6.712” x 5.034”
170.496mm x 127.872mm
9 to 36VDC (12VDC typ.) – Amperage Draw 3.0A @ 12VDC for 36W (with
heater)p
Operating: -20 to 70ºC (optional -40 to 70ºC)
Storage: -40 to 75ºC
Operating: Up to 10,000 ft
Storage: Up to 45,000 ft
SPECIFICATIONS
Panel Size 8.4” (21cm)
Type Active Matrix Color Thin Film Transistor (TFT)
Native Panel Resolution XGA
Pixel Format 1024 (H) x 768 (V)
Pixel Pitch 0.1665 (H) x 0.1665 (V) mm
Pixel Arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe
Dot Pitch 0.0555 (H) x 0.1665 (V) mm
Active Display Area
Viewing Angle (Left/Right)
Viewing Angle (Up/Down)
Color Gamut 72% (typ.)
Brightness 1000 Nits (typ.)
Contrast Ratio 400:1 (typ.)
Dimming Ratio 5000:1 (min.)
Response Time 25ms (typ.)
Back Lights 2 LED Rail rated 70,000 Hrs.
Video Connectors LEMO IP67
Colors Supported 16,777,216 (8-bit input)
Video Input Analog 0.7v p-p, TTL
Sync Separate H & V, Combined, SOG
Input Voltage
Power consumption 38 Watts (45 Watts with heater)
85/85
85/85
o
(typ.)
o
(typ.)
Temperature
Humidity Operating/Storage: 0 to 100 %NC
Operating Altitude
VT084 All Weather User’s Guide 150-181
15
Page 16
VT084 All Weather User’s Guide 150-181
16
Page 17
VT084 All Weather User’s Guide 150-181
17
Page 18
Power Cable Diagram
The RED wire with the +V would be connected to the +DC input voltage (like 12VDC or 24VDC)
The BLACK wire with the –V would be connected to the DC input return.
Considering a DC battery, the +V is the positive terminal on the battery while the –V is the negative terminal on the
battery.
The WHITE wire with the SHD would be connected to the chassis of the voltage source. This wire is connected to the
cable SHIELD to help reduce noise from getting into the cable wires and causing any problems within the display. A
customer could elect not to connect the SHIELD wire.
VT084 All Weather User’s Guide 150-181
18
Page 19
VARTECH SYSTEMS INC.
HEADQUARTERS
6399 Amp Drive, Clemmons, NC 27012
Toll-Free: 800.223.8050
International Phone: 001.225.298.0300
Fax: 225.297.2440
E-mail: sales@vartechsystems.com
www.vartechsystems.com
VT084 All Weather User’s Guide 150-181
19
Loading...