Varta V-CDR302US User Manual [ru]

Руководство по эксплуатации

Instruction manual

V-CDR302US

CD/MP3/USB/SD­СТЕРЕОМАГНИТОЛА

CD/MP3/USB/SD
RADIO PLAYER

Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

11
12

13 14 15

1. NEXT button

2. Power indicator

3. Memory card socket

4. LCD display

5. VOL DOWN button

6. STOP/SD CARD button

7. PLAY/PAUSE/USB button

8. CD compartment door

9. Handle

10. TUNING regulator

11. BACK button

12. PROG/REPEAT button

13. FOLDER/SKIP+10 button

2

14. USB port

15. VOL UP button

Not indicated:

Back of the unit: Headphone jack, Tele­scopic FM-antenna, Power socket, AUX
input
Right panel: Function switch (AM/FM
(AUX)/OFF/CD/MP3/USB/SD)
Bottom of the unit: Battery compartment.

www.varta-electronics.ru

Instruction manual

REMOTE CONTROL

1

4

5

2

3

1. Number buttons

2. PLAY/PAUSE/USB button

3. STOP/CARD button

4. PROG/REPEAT button

5. SKIP+10/FOLDER button

6. NEXT button

7. BACK button

All buttons of the RC perform the
same functions as corresponding buttons
on the unit body.

6

7

IMPORTANT SAFEGUARDS

product enclosure.

• Caution: To reduce the risk of electric

shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do
not use the unit in places where it can be
exposed to water, moisture and dust. Make
sure that pins or other foreign objects do
not get inside the unit; they may cause mal­functions, or create safety hazards such as
electrical shock.

POWER SUPPLY

Battery operation

• Open the battery compartment cov-

er. Insert 6 batteries 1.5 V (UM-2/LR14).
Please observe correct battery polarities or
the set will not work.

• Close the battery compartment cover.

AC operation

• Before the first connecting of the ap-

pliance check that voltage indicated on the
rating label corresponds the mains voltage
in your home.

• Connect the power cord to the pow-

er socket of the unit. Insert the plug into
power supply.

Caution:

• When the set is only used with AC or

is not used for 2 weeks or more, please
remove the batteries, to avoid damage to
the set from leakage of batteries.

• Always switch off the unit when not

in use.

• Always unplug the appliance from

power supply, when not in use long time.

• Attention: The owner’s manual

contains important operating and main­tenance instructions. For your safety,
it is necessary to refer to the manual.

• Dangerous voltage: Uninsulated

dangerous voltage that may be of sufficient
magnitude to constitute a risk of electri­cal shock to persons is present within this

www.varta-electronics.ru

RADIO OPERATION

• Set the Function switch to the desired

band (AM or FM).

• Rotate TUNING regulator to tune-in

the desired station. Current frequency will
be displayed.

3

Instruction manual

• Adjust the telescopic antenna (for

FM) and position of the set (for AM) to ob­tain the best reception.

• Press VOL UP/VOL DOWN buttons to

adjust the volume to the desired level.

• To turn off the radio, slide Function

switch to “OFF”.

HEADPHONE CONNECTION

• For private listening, insert 3.5-mm

headphone into the stereo headphone jack
(on the back side of the unit).

• Adjust the sound volume to the ap-

propriate level.

• When the stereo headphone jack is

plugged, speakers will disconnect auto­matically.

AUX INPUT JACK

You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that de­vice through the amplifier of this unit.

• To connect an external audio device

(eg. MP3 player), please use a standard
stereo cable (not included) with 3.5-to-3.5
mm plugs to connect the headphone out
or audio line-out of the external device to
the AUX input of this unit.

• Slide the Function switch to AM/FM/

AUX position.

• Turn on the external device.

CD/MP3/USB/SD OPERATION

Insertion and removal of discs

• When opening the CD-door, always

ensure the disc is not in motion (not spin­ning). Always press STOP/SD CARD button
to stop the disc spinning first.

• Place a CD into the compartment with

the label-side (printed side of disc) facing
upwards. Press down in the center part of

disc until the disc locks onto the center
spindle.

• When the CD has been placed onto

the center spindle, gently lower the CD­door downwards until it locks shut.

• The CD is now ready to be played.

• To remove a disc, follow the same

procedure as described above, except to
remove the CD instead of inserting it into
the compartment, by placing one finger at
the middle of disc (center spindle) and the
other at the edge of the disc and gently
pulling upwards.

Always hold a CD by its edges. Avoid
getting any finger prints, smudges or dirt
onto the surface of a disc. In case this hap­pens, use a special CD-cleaning cloth or
cleaning kit to remove the dirt or smudges.
Please make sure to always fold down the
handle before opening the CD door.

General operation

• Insert a CD as described.

• Slide Function switch to “CD/MP3/

USB/SD” position.

• The CD will spin momentarily and

then the display will show the total number
of tracks (songs) of the disc.

• At anytime during playback, press

PLAY/PAUSE/USB button to pause opera­tion of the unit. Press this button to resume
operation at the same track and position.

• At anytime during playback, press

STOP/SD CARD button to stop operation of
the set. This will reset the player to the first
track (if you press PLAY/PAUSE/USB after
STOP/SD CARD, the first track will always
start playing).

• During playback, press BACK and

NEXT buttons to ski p backwards or for­wards by one track.

• During playback, press and hold

BACK and NEXT buttons to fast-reverse or
fast-forward the currently playing track.

• During playback, press number but-

tons on the RC to select the track number
directly.

4

www.varta-electronics.ru