How it Works
Varta
Loading...
V-AVM651F
User Manual
114 pgs1.84 Mb0

Varta V-AVM651F User Manual

V-AVM651F
2 DIN DVD/CD/MP3 RECEIVER WITH BUILT-IN 6.5” TFT DISPLAY
2 DIN МУЛЬТИМЕДИЙНЫЙ DVD/CD/MP3-РЕСИВЕР СО ВСТРОЕННЫМ 6.5” TFT-
ДИСПЛЕЕМ
Instruction manual Руководство по эксплуатации
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.
Table of contents
Table of contents ..........................................................................................................................................................2
Important safeguards ....................................................................................................................................................3
Multizone device description........................................................................................................................................5
Accessories ...................................................................................................................................................................6
Installation/connection..................................................................................................................................................7
Unit controls ...............................................................................................................................................................10
Monitor operations .....................................................................................................................................................16
General operations......................................................................................................................................................19
Radio (digital tuner) operations..................................................................................................................................20
Disc operations ...........................................................................................................................................................23
SD/MMC card ............................................................................................................................................................34
System setup menu .....................................................................................................................................................36
DVD setup menu ........................................................................................................................................................40
Other playback modes ................................................................................................................................................46
Handling and cleaning discs .......................................................................................................................................48
Troubleshooting guide................................................................................................................................................50
Specification ...............................................................................................................................................................52
2
Important safeguards
• Using the device at temperature below -10ºС may cause the breakage of the device.
• Before using, please, heat up the passenger compartment to the recommended temperature!
• Read carefully through this manual to familiarize yourself with this high-quality car stereo system.
• Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a
higher amperage rating may cause serious damage to the unit.
• DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
• Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or
create safety hazards such as electrical shock or laser beam exposure.
• If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
• Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
• Make sure you disconnect the power supply and aerial if you will not be using the system for a long
period or during a thunderstorm.
• Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.
• The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before installation.
• Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.
• Install the unit horizontally. Install the unit more than 30 degree vertically may result in worse performance.
3
• Do not block the cooling fan exit to ensure sufficient heating dissipation of this unit, failure to do this may result in damage to this unit.
4
Multizone device description
Multizone definition means the ability of using the head device as the two synchronous signals source. For example by means of the two different signals distribution the user can listen to the radio or see the navigation information on the screen (the first zone), and the back passengers can look the DVD film at the same time (the second zone). In first case the audio signal will be reproduced by front speaker, and in second case – by rear speaker. The variants of distributing are different and its amount depends on used audio and video sources.
5
Accessories
No. Item Diagram Quantity No. Item Diagram Quantity
1 DVD player
2 ISO power line
3 Harness cable
4
5
6 Rubber cover
Audio output
cable
Navigation
cable
1 7 Glasses cloths
1 8
1 9
1 10
1 11 Warranty card
1 12
Remote control
for front zone
Remote control
for rear zone
Owner’s
manual
Consumer
information
1
1
1
1
1
1
6
Installation/connection
DVD/CD/MP3 receiver V-AVM651F is recommended to be installed in following model of car: Ford Focus 2
and also for cars which have 2-Din slot for the unit.
Parking brake
Rear View Video Camera
7
Installation procedure
1. Ring the assembling rubber sheath to the screw bolt in the back of the unit, plug the power connector and radio
antenna plug into the unit correctly and connect them with the according plugs in your car.
2. Push the unit along the mounting hole until you hear a crack that means the unit has been assembled correctly.
8
Electrical Connection
9
Unit controls
Monitor
1. POWER/MUTE button
2. SRC button
3. VOL/SEL knob
4. MENU button
5. NAVI button
6. Disc slot
7. Infra red sensor
8. EJECT button
9. WIDE/PIC button
10. RESET button
11. TUNE/ENT knob
12. SD slot
10
Remote control 1 (general)
1. EJECT button – Press it to eject the disc.
2. SRC button - Select the playback source.
3. MUTE button - Turn on/off volume output.
4. POWER button - Turn on/off the power.
5. TITLE button - Enter the title menu of the disc (in DVD source).
6. MENU button - Enter the main menu of the disc (in DVD source). Turn
on PBC when playing VCD.
7. AUDIO button - Change the audio language during playback DVD.
Change the channel during playback VCD.
8. SUBTITLE button - Change subtitle language during playback a DVD
disc.
9. ANGLE button - Playback a DVD disc in different angle of a scene.
Playback Picture CD with different angles of picture displayed.
10. DISP button - Display playback information.
11. REPT A-B button - Press to repeat playback from time frame A to time
frame B (in DVD source).
12. REPT button - Press to repeat playback each chapter/title disc (in DVD
mode).
13. DVD button – Enter the DVD mode.
14. WIDE button - Select aspect ratio mode.
15. SD button – Enter the SD mode.
11
16. TUNER button – Enter the radio mode.
17. DISC ▼ button - Select the next disc to playback in DVDC source (Not supported by this unit).
18. DISC ▲button - Select the previous disc to playback in DVDC source (Not supported by this unit).
19. VOL- button - Decrease volume.
20. VOL+ button - Increase volume.
21. STOP/BAND button - stop playback, select FM/AM band.
22. button - Fast forward the current disc in DVD source. During menu setup, move to upper selection.
23. SCN button - Play the first ten second of each chapter in DVD player.
24. RDM button - Play all chapters in random order in DVD player.
25. b utt o n - Select the previous track/chapter for playback. During menu setup, move to left selection.
Searching an available FM/AM radio station by decreasing tuning frequency.
26. PLAY/PAUSE button - Pause playback. Start playback. This button is also used to enter the menu setup. Scan
tuning FM/AM radio station playback.
27. button - Select the next track/chapter to playback. During menu setup, move to the right selection. Searching
an available FM/AM radio station by increasing tuning frequency.
28. SEL button – Enter/Exit the audio adjustment mode.
29. GOTO button – Go to specific time frame and playback.
30.
button - Slow playback the disc in DVD source. Slow rewind playback the disc in DVD source. During menu
setup, move to the lower selection.
31. ZOOM button - Zoom in image during playback DVD/VCD disc.
32. PIC button - Press it to enter setting mode. To adjust the setting press the / buttons. Press it again to exit
the mode.
12
33. Numeric keypad
34. DVD SETUP button - Playback function setup for DVD player.
35. SYS SETUP button - System function setup of the unit.
13
Remote control 2 (kid zone)
1. MUTE button - Turn on/off volume output.
2. R.SRC button - Playing source selection for rear zone.
3. TITLE button - Enter the title menu of the disc (in DVD Player).
4. MENU button - Enter the main menu of the disc (in DVD Source). Turn on
PBC when playing the VCD disc.
5. AUDIO button - Change the audio language during playback DVD. Change
the channel during playback VCD.
6. SUBTITLE button - Language selection for subtitle (in DVD source).
7. button - Select the previous track/chapter for playback. During menu
setup, move cursor to the left selection.
8. button - Select the next track/chapter for playback. During menu setup,
move cursor to the right selection.
9. button - In DVD source, fast forward the disc content.
button - Slow playback (in DVD source). Slow rewind playback (in
10.
DVD source). During menu setup, move to the lower selection.
11. PLAY/PAUSE button - Pause playback. Start playback. Act as ENTER for
menu setup.
12. Numeric keypad
13. REPT button - Setup to repeat playback each chapter/title/disc.
14. GOTO button – Go to specific time frame and playback.
14
Changing the battery
1. Press the catch and at the same time pull out the battery tray.
2. Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped
(+) mark facing upward. Insert the battery tray into the RC.
Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire. Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a fire.
15
Monitor operations
Aspect ratio
The aspect ratio alters according to the following while pressing the WIDE/PIC button on the panel or the WIDE button on the RC: CINEMA => WIDE => NORMAL => STANDBY. CINEMA – The screen is extended horizontally as a whole to the aspect ratio of 16 to 9. The extension ratio is the same at any point of the screen. WIDE – The screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio increases toward the right and left edge of the screen. NORMAL – The conventional display image has a 4 to 3 ratio of horizontal to vertical. In this case, a blank area remains on the right and left sides of the display.
Image setting
The video output format for the each playing source is listed as below:
1. Press the PIC button on the RC or press and hold the WIDE/PIC button on the panel to open the image
adjustment menu.
In RGB mode, only BRIGHT is available for adjustment.
Playing source Video output format
TUNER DVD SD Card NAVI AUX IN CAMERA
RGB mode
CVBS mode
16
In CVBS mode, PICTURE, COLOR, CONTRAST, BRIGHT and TINT are available for adjustment.
2. Press the /
buttons on the remote control to select the needed value.
3. Press the / buttons on the remote control or rotate the TUNE/ENT knob on the panel to adjust the selected
setting.
4. Press the PIC button on the remote control or the WIDE/PIC on the panel to save settings.
Audio Setting
Audio control allows you to easily adjust the audio system to meet the in-car acoustic characteristics that vary depending on the type of car and its measurement.
1. Press and hold the VOL/SEL knob on the panel or press the SEL button on the RC to enter audio setting mode.
2. Rotate the TUNE/ENT knob on the panel or press the / buttons on the RC to select a setting item: EQ –
Bass – Mid – Treble – Bal – Fade – SUB.W – Center. You can also perform this operation by pressing the
corresponding menu item button on the display.
3. To adjust the value rotate the VOL/SEL knob on the panel or press the /
buttons on the RC. You can also
perform this operation by pressing the +/- buttons corresponding to each menu item on the display.
4. Press and hold the VOL/SEL knob on the panel or press the SEL button on the RC to exit audio setting mode.
Notes: EQ modes: User, Flat, Danc, Pop, Latin, Rock, Acou. Bass, Mid and Treble items can be adjusted only in User mode.
17
When parking brake applied
If “PRK SW” cable is connected to hand brake switch, the video picture of the TFT display will be controlled by driving status, system setup and video sources.
• When “Parking” is set to “Off” or the car is parking or the video input source is “Camera”, the video picture of the TFT display will be normal.
• When “Parking” is set to “On” and the car is moving ahead, blue screen will be displayed with warning information to prevent the driver from watching other content when driving. The passengers at the rear can watch normally.
Auto brightness control
To avoid the display being too bright at night time, if the cable for headlight is connected to ILLUMI (for more details, please refer to “Electrical Connection” diagram), turning on the headlight dims the backlight of TFT display and vice versa.
Line mute
If the MUTE is connected, other audio outputs are closed when a call is received by the car phone (for more details, please refer to “Electrical Connection” diagram).
Reverse Driving
If the rear view video camera is connected, the unit automatically switches to CAMERA source during reverse driving. The unit returns to the original work mode after the reverse driving is done.
18
General operations
Reset the unit
When operating the unit for the first time or after replacing the car battery, or if the unit is working abnormally, you should reset the unit. Press the RESET button on the panel to restore the unit to the default factory settings.
Power on/off
Press POWER/MUTE button on the panel or the POWER button on the RC to turn the unit on. Press and hold the POWER/MUTE button or press the POWER button on the RC to turn the unit power off. Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status that you set.
Volume control
Press the VOL +/- on the RC or rotate the VOL/SEL knob on the panel to increase/decrease the volume level.
Mute function
When the unit power is on press the POWER/MUTE button on the panel or the MUTE button on the RC to turn off the sound. Press it again or press the VOL +/- button to resume the volume.
Mode selecting
Short press the SRC button on panel or on the RC to enter playback source menu, and press this button repeatedly to select and enter a playback source (or press the sensor button): TUNER => DVD => SD => NAVI => AUX IN => CAMERA.
19
Radio (digital tuner) operations
Mode selecting
Press the TUNER button on the RC to switch to radio mode directly, or press the SRC button on the panel or on the RC repeatedly to switch to Radio mode, or press the MENU button on the panel or the left top corner of the screen to open the sources menu and then press the TUNER button on the display.
User interface (UI) of Radio mode
When the unit is switched to Radio mode, the following user interface will be displayed:
1. Source name
2. Stereo broadcast indicator
20
3. Current radio band and frequency
4. Local function indictor
5. Clock
6. Enter rear zone
7. Radio function buttons
8. Preset radio station
9. Radio search mode indicator
To return to main menu press the TUNER button in the top left corner of the display. Note: The second window is opened when the multizone function is activated or when the display doesn’t show the video files.
Band selection
Press STOP/BAND button on the RC or press BAND button on the touch screen to switch to the bands among FM1, FM2, FM3, AM1 and AM2 band.
Manual/automatic tuning
• Manual tuning: Rotate the TUNE/ENT knob on the panel, or press /
buttons on the RC repeatedly, or press / buttons on the touch screen repeatedly to select a station upward or downward step by step. Press and hold number buttons (1-6) to store the found station.
• Automatic tuning: Press and hold / buttons on the RC or press / button on the touch screen to start automatic seeking for an available radio station by increasing tuning frequency. Another method is to press the TUNE/ENT knob on the panel to enter the Auto search mode and then rotate the TUNE/ENT knob on the panel. Press and hold number buttons (1-6) to store the found station. Press these buttons again to stop the searching.
21
AMS (Auto Memory Store) function
Select the band. Long press TUNE/ENT knob on the panel or press AS button on the touch screen to tune all the radio stations in range from the current frequency, and auto store 6 radio stations with the strongest radio signals in P1 to P6 respectively according to frequency from low to high. To stop auto store, press AS button again.
Scan preset stations
Press the ►/II button on the RC to scan all the preset stations in the memory of the current band and play
each station for 5 seconds. To stop scanning, press any radio function button.
Local radio station seeking (LOC)
When the LOCAL function is on only the stations with strong radio signal can be received and played. Press LOC button on the touch screen to turn the LOCAL function on or off.
22
Disc operations
Glossary
PBC (PlayBack Control)
PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. And if the disc contains still images, it can playback high definition of still image.
Title
The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2 and Title 3. You can easy use the search functions.
Chapter
A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The chapter contains a unit at least.
Track
It is the biggest component of VCD. Generally, every song of karaoke disc is a track.
23
Discs for playback
• This unit can play disc types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/SD.
• Compatible with formats: DVD/SVCD/VCD/HDCD/MPEG4/MP3/WMA/CDDA/Picture-CD/JPEG.
• The following file types are supported:
Audio files: MP3 (*.mp3)
WMA (*.wma)
Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID)
MPEG 2(*.vob)
MPEG 1(*.dat)
Picture file: JPEG (*.jpg)
• ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters
• Max. Track number is 448
• Max. nested directory is 8 levels
• The max. album number is 99
• The max. length of each track is 99 minutes 59 seconds
• Supported sampling frequency for MP3 disc: 8 KHz – 48 KHz (44.1 KHz preferably)
• Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably).
• Following formats are NOT supported *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, files with DRM.
• Open session discs are NOT supported.
24
Touch screen operations
A - Open front sources menu
B - Display playback information
C - Open rear sources menu
D - Play previous file
E - Play next file
F - Recall the following buttons: ►/II, ■, , , , .
Loading a disc
1. Turn the power on and insert the disc into the slot with the printed side facing upward.
2. The unit will enter DVD mode automatically.
3. Press the EJECT button on the panel or on the RC to eject the disc and the unit will switch to radio mode
automatically.
Play/Pause
It will take some seconds to load the disc. When the playback starts, press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC to stop the playback temporarily. To resume the playback, do the operation again.
Stop playback
During playback, press the STOP/BAND button on the RC, the playback will stop and the current playback point will be memorized. To resume the playback, press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC. Press the STOP/BAND button again to stop playback fully. If you start playback now, the playback will start from the very beginning.
25
Fast Forward (FF)/Fast Reverse (FR)
Press button on the RC repeatedly to select the speed of FF or FR: X2 => X4 => X8 => X20. To resume normal playback, press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC.
Slow Forward (SF)/Slow Reverse (SR)
Press II► button on the RC repeatedly to select the speed of SF or SR: Xl/2 => Xl/4 => Xl/6 => Xl/7. To
resume normal playback, press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC.
Playback the previous/next file
Rotate the TUNE/ENT knob on the panel or press the / button on the RC.
Repeat playback
Press the REPT button on the RC repeatedly to select repeat mode. For DVD: Repeat Chapter => Repeat Title => Repeat Off. For VCD (PBC Off)/CD: Repeat Single => Repeat Off For MP3: Repeat Single => Folder Repeat => Repeat Off.
Repeat A-B function(for DVD/VCD/CD)
During playback, the playback between point A and B is repeated when this function is on. Press the REPT A-B button on the RC to set the start point (A) and repeat this operation to set the end point (B) of the section you want to repeat. Press the REPT A-B button for the third time to cancel the A-B repeat function and normal playback is resumed.
Random playback
During playback, press the RDM button on the RC to start random playback. Press it again to turn off this function.
26
Note: PBC function is closed automatically when random playback is on.
Intro playback
You can play the first 10 seconds of each file. Press the SCN button on the RC to start intro playback. To cancel this function, repeat the operation again.
Note: This function may be unavailable for some disks.
GOTO search function
The unit can go to the track/chapter or the time point you need.
Enter GOTO search mode
Press the GOTO button on the RC and the search menu will be displayed on the screen. For VCD, press the GOTO button repeatedly to select the Track Search or the Disc Search.
For DVD For MPEG4/VCD
Search Track search Disk search
Time --:--:-- Time --:--:-- Time --:--:--
Title/Chapter ---/--- Track ---/--- Track ---/---
Select a type of search
Press cursor buttons on the RC to select search option: Time/Title Chapter/Track.
Search
• For time search
Press the numeric buttons to enter the time you want to start playback from (hh:mm:ss). For example, to enter time 18:20:00, press 1 => 8 => 2 => 0 => 0 => 0.
27
Press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC to start playback.
• For Title/Chapter search
Press the numeric buttons and button on the RC to enter the title and chapter number you need. For example, to search the 8th chapter of the 20th title, press 2 => 0 => => 8. Press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC to start playback.
• For Track search
Press the numeric buttons to enter the track number. For example, to enter the 13th track, press 1 => 3. Press the TUNE/ENT knob on the panel or the PLAY/PAUSE buttons on the RC to start playback.
Exit GOTO search mode
To exit GOTO search mode, press the GOTO button repeatedly until the search menu disappears.
Direct track selection (for CD/VCD)
During playback, press the numeric buttons on the RC to go to the track needed. For example, if you want to play the 15th track, press 1 and then 5.
Audio channel selection
• For DVD
Press the AUDIO button repeatedly on the RC to change the dialogue language.
• For VCD/CD
Press the AUDIO button repeatedly on the RC to select one audio channel output mode: Left, Right and Stereo.
Disc Menu (for DVD only)
1. Disc menu
• Press the MENU button on the RC to enter the disc menu.
28
• Rotate the TUNE/ENT knob on the panel or press cursor buttons on the RC to select the item.
• Press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC to start playback.
2. Title menu
• Press the TITLE button on the RC to enter the disc menu.
• Rotate the TUNE/ENT knob on the panel or press cursor buttons on the RC to select the item.
• Press the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC to start playback.
PBC (Playback Control) function (for VCD only)
If you insert a VCD disc with PBC function, playback starts from the first track automatically. Press the MENU button on the RC to activate PBC menu. If the menu consists of list of tracks, you can select a needed one by pressing the numeric buttons or the cursor buttons on the RC and then pressing the TUNE/ENT knob on the panel or the PLAY/PAUSE button on the RC to start playback. To deactivate PBC function, press the MENU button again.
Note:
• When PBC function is activated, fast playback, slow playback, and previous/next track are available. Repeat playback and direct track selection are invalid.
• When PBC function is activated, if random playback or intro playback is performed, PBC function is deactivated automatically.
Subtitle language selection (for DVD only)
Press the SUBTITLE button on the RC to change the subtitle language among the languages supported by the DVD disc.
29
View angle selection
Press the ANGLE button repeatedly on the RC to play back images in different camera angles. If the disc does not support multi-angle playback, this function will not work.
Zoom
During playback, press the ZOOM button on the RC to zoom in images. Images will be enlarged accordingly: X1 => X2 => X3 => X4 (DVD only) => OFF.
Playback information
During playback, press the DISP button on the RC, the playback information will be displayed on the screen.
For DVD disc
Playback information
1. This DVD has 8 titles and the title playing back now is the 5th title.
2. The current title has 16 chapters and the chapter playing back now is the second chapter.
3. Elapsed time
4. The subtitle of this DVD has been recorded in 6 languages and the language displayed now is the second,
which is English.
Playback status
30
Loading...
+ 84 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use