VariZoom VZD100 User Manual

The VZD100 collapsible dolly for use with the

VZTC100A/C and VZT100A

WARNING: Do not leave the wheel brakes engaged when in storage or grooves may form in the wheel

rubber.

Features:

• Fully collapsible wheel assembly.

Assembly:
The VZD100 is designed for use with the VZT100A, VZTC100A/C

The dolly can be collapsed for easy storage and
transport. When setting up the dolly, you must
unscrew the supplied locking screws completely, in
order to move the legs round till they form a triangle.
After setting the legs in the correct positions, you
must take the locking screws and re-screw them into
the legs.

In order to mount the tripod, you must remove the rubber
feet till the tripods pointed inner feet are exposed. You
will notice on the dolly a little spot which that pointed foot
will sit within. Once you have them lined up and set, you
must pull the large rubber section of the dolly leg upwards
and over the lip, tightening it down.

Each of the wheels comes with a brake, in order to lock
down movement and prevent the dolly from drifting. Just
press down on the brake firmly with foot to lock.

The VZ-D100 tripod is covered by a one-year warranty (parts/labor). Please retain your receipt for warranty

verification. All returns and repairs must be accompanied by a Return Merchandise Authorization number

(RMA#). Contact us at 888-826-3399 / 512-219-7722 or at www.varizoom.com