VariZoom VZCINETRAC User Manual

The VZ-CINETRAC collapsible Dolly for use with the

VZTC100A/C and VZT100A

Features:

• Fully collapsible wheel assembly.

• Swiveling third leg

Assembly:
The dolly can be collapsed for easy storage and transport. When

setting up the dolly, you must unscrew the supplied locking screws
completely, in order to move the legs round till they form a triangle.
After setting the legs in the correct positions, you must take the
locking screws and re-screw them into the legs.

In order to mount the tripod, you must remove the rubber feet till the
tripods pointed inner feet are exposed. You will notice on the dolly a
location which the pointed foot will sit within. Once you have them lined
up and set, you must pull the large rubber section of the dolly leg
upwards and over the lip, tightening it down.

The wheels are designed specifically for the
VZ-TRACK rubber track; the swinging arm will guarantee
smooth motion and control. Due to the design,
the dolly itself does not have brakes,
so use it on a flat and even surface.

The VZ-CINETRAC tripod is covered by a one-year warranty (parts/labor). Please retain your receipt for warranty

verification. All returns and repairs must be accompanied by a Return Merchandise Authorization number

(RMA#). Contact us at 888-826-3399 / 512-219-7722 or at www.varizoom.com

VZ-Cinetrac

VZ-TC100C

Sold separately

VZ-Track

Sold separately