Black Hawk
Professional Heavy-duty Dual-dynamic
Stabilizer Manual
Please read the instruction manual thoroughly before
operating your Black Hawk stabilizer for the first time to
avoid injuring yourself or damaging the unit.
The robust construction of the Black Hawk makes it an
excellent long-term investment, but its precision design also
means that you must exercise care in the storage, transport,
and operation of the unit to ensure optimal long-term
performance.
You should also review the instructional DVD before
attempting to shoot usable footage with the Black Hawk.
The Black Hawk consists of the vest, dual-dynamic arm,
and sled:
The System also
includes a 7” 16:9 monitor, 11” Dovetail plate, padded rolling
case, DVD, Tool Kit, BNC video cable, Lemo power cable,
handle extension, & balancing plate. NO BATTERY OR
CHARGER INCLUDED.
Page 2
Subsystems
The Vest
The purpose of the vest is to comfortably distribute the
weight of the camera and stabilizing system on your body.
To achieve optimal results, you should adjust the vest so
that it fits snugly.
Adjust the vertical fit by
adjusting the straps, pulling the
chrome release pin and sliding
the chest plate up or down until
you find the right position.
-The arm bridge has been
replaced by the MX Trim
adjuster – see instructions for
the MX-TA.
- Adjust the tightness of the vest around your waist using
the Velcro strap, drawing
it around evenly on both sides of the
lower vest pad.
-Adjust the tightness around your torso by positioning the
Velcro straps across the back of the vest and securing the
buckles to the chest plate. Make the vest as tight as
possible to maximize operational quality and comfort. Once
you’ve adjusted the vest, remove it for easy re-suiting by
unclipping the buckles and strap on one side only.
Complete System
Weight
Arm Weight
Vest Weight
Sled Weight
Vertical Range of Arm
Camera Weight Range
LCD Monitor
Components List
Arm / Sled Dimensions
Case Dimensions
Packed Weight
Black Hawk w/ V-lock
23 lbs
10.5 lbs
6.2 lbs
6.3 lbs (w/ monitor)
38"
10-25 lbs (w/ free optional weight plate, 15-25
lbs w/o)
7" 16:9 NTSC (16:9/4:3 switchable); PAL
version available on request
Sled, 11" Dovetail, Monitor, Arm, Vest,
Extension Grip, Balancing Plate, Tool kit, Low
Mode Cage, DVD, Manual
39.5" x 3.5" x 2.75" / 29.5" x 12.5" x 4.5"
H 33" W 20.5" D 17"
Approx. 46 lbs
Add 1" sled length, Extra attachable
counterweight (2lbs, non-integral)