Laminating & Mounting System
A Brady Business
USER’S GUIDE
Technology
us 5,580,417 us5,584962 Other Patents Pending
Product Feet
No. Description Applications Per Roll
14554-00 Mounting Adhesive Paste-ups, comps, storyboards 300
Application – High Tack & presentations on foam core
14556-00 Mounting Adhesive Paste-ups, comps, storyboards 300
Application – Low Tack & presentations on foam core
14553-01 Dual-Sided Lamination Posters, inkjet & thermal 300
Direct Thermal Compatible prints & banners
14557-01 1 Side Laminate/1 Side Mounting Paste-ups, comps, storyboards & 300
Adhesive – High Tack presentations on foam core,
Direct Thermal Compatible provides protection to top surface
14558-01 1 Side Laminate/1 Side Mounting Paste-ups, comps, storyboards & 300
Adhesive – Low Tack presentations on foam core,
Direct Thermal Compatible provides protection to top surface
Replacement Cartridges
Please follow the attached directions carefully.
The ProFinish™ System is an economical and easy to use document finishing system.
This versatile and non-electric system has been designed to laminate or apply
mounting adhesive to a variety of media. The same system is capable of laminating,
selectively applying adhesive or laminating and applying adhesive at the same time.
With the ProFinish™ System, documents are easily laminated or can be transformed
into signs, stickers or labels instantly. The machine and supplies are compatible with all
types of computer-printed media including laser, inkjet, color and thermal in a wide
range of material sizes and thickness.
Technology
us 5,580,417 us5,584962 Other Patents Pending
Upper Idle Bar
Lower Idle Bar
Paddle
Used to
lock document
in place
Feed Tray
Used to guide and
align documents
into the machine
Top Cover
Removes to
install/remove
supplies
Crank Handle
Used to advance
documents and film
thru machine
Lower Cut
Guide
Rubber Rollers
Lower Supply Roll
Upper Supply Roll
Lower
Access Door
Open to install
and remove
supplies
Slots for
Supply
Installation
Cut Blade
Used to trim output as it
exits –
the machine will
cut when moved to
either direction
Upper
Cut Bar
Understanding the ProFinish™ System
Parts and Functions
Remove the machine from the packaging
and place on a level surface. Locate
the crank handle which is
taped to the bottom
inside of the machine.
Install the crank
handle by carefully
threading clockwise
(direction of the arrows)
into the lower rubber roller.
Cut the tie wraps holding
the upper cut bar and lower
guide together.
Step 1:
•
Remove the top cover of the machine
by lifting upward.
•
Grasp the handle on the lower
access door; pull to open.
Step 2:
•
Match the colored dots on the end of
each supply roll with the corresponding
dots on the side of the machine.
Note which roll is identified as
“top” and “bottom”.
•
Slide the supply rolls into the
grooves in the sides of the machine,
making certain that the roll is
inserted completely.
Setting Up
Loading Supply Rolls
Loading...