VARILIGHT
PowerGrid
®
Fitting instructions
VARILIGHT
Grid Dimmers
Maximum
Important:
dimmer modules,
maximum loads permitted per plate.
The loadings below are for LED and Halogen loads.
Maximum
Maximum
Single (1 and 2
-
Gang) 400W 400W
Twin (3 and 4
-
Gang) 800W 800W
Double Twin
(6 and 8
-
1200W
800W
Triple Twin (9 and 12
-
1800W
800W
WARNING:
Do not apply products with metal faceplates
If in doubt, consult a qualified electrician.
1. Always disconnect the mains before beginning any
electrical work
2. Clip grid modules into grid plate
3. Make electrical connections making sure any bare
wires are covered by appropriate sleeving
4. The grid plate must be earthed using the earth
terminal provided
5. Screw grid plate to wall using larger fixing screws
supplied
6. Attach faceplate using smaller fixing screws
supplied
7. Switch on the mains supply.
directly to freshly plastered or damp surfaces as product may
tarnish. If in doubt, use polythene as a temporary gasket to
protect the product. Do not use masking tape on metal plates.
Guarantee: If the unit becomes faulty within 10 years of purchase,
you may return it for replacement to:- Service Department, Carylls
Lea, Faygate, Horsham, West Sussex, RH12 4SJ. This guarantee
states Varilight’s entire liability, which does not extend to cover
consequential loss or damage or installation costs arising from a
defective product. This guarantee does not in any way affect the
statutory rights of the purchaser and is offered so that you may
have the benefit of our technical facilities.
DOYLE & TRATT PRODUCTS LTD PGRID002
Loads Per Grid Faceplate
Before using this product with
read the guidance below on
Plate Size
Gang)
Gang)
Loading
(Per Plate)
Loading
(Per Row)
Loading...