Varian MICRO-gc User Manual

NOTICE: This document contains references to Varian.
Please note that Varian, Inc. is now part of Agilent
Technologies. For more information, go to

www.agilent.com/chem.

Varian B.V.
Herculesweg 8
4330 EA Middelburg
The Netherlands

Micro-GC

Battery Pack and Charger

User Manual

North/South America
2700 Mitchell Drive
Walnut Creek
94598 California, USA
Tel: ++(1)9259392400
Fax: ++(1)9259452360 or
++(1)9259452344

© 2002-2009 Varian, Inc. All Rights Reserved. Printed in the Netherlands CP501276 Rev:4 November 2009

Europe
P.O. Box 8033
4330 EA Middelburg
The Netherlands
Tel: ++(31)118671000
Fax: ++(31)118623193

Australia/East Asia
679 Springvale Road
Mulgrave, Victoria 3171
Australia
Tel: ++(61)395607133
Fax: ++(61)395607950

Varian Analytical Instrument Warranty

Hardware Products

All analytical instruments sold by Varian are warranted to be free from defects in material and workmanship for the
periods specified and in accordance with the terms on the face of Varian's quotation or as otherwise agreed upon in
writing between Varian and the Customer. The warranty period begins on the date of shipment from Varian to the
original Customer. However, where installation is paid for by the Customer or included in the purchase price, the
warranty period begins upon completion of installation. If the Customer schedules installation to start later than 30 days
after delivery or if such delay is caused through the Customer's inability to provide adequate facilities or utilities or
through failure to comply with Varian's reasonable pre-installation instructions or through other omissions by Customer,
then the warranty period starts on the 31st day from date of shipment. Moreover Varian will charge the Customer for
labor and other expenses involved in making multiple or follow-up installation service calls.

Software Products Where soft

warranty shall be strictly in accordance with the terms of such agreement.
In the absence of a license agreement and unless an alternate warranty period is agreed upon in writing between Varian
and the Customer, the warranty period is as specified on the face of Varian's quotation. Varian warrants such software
products, if used with and properly installed on Varian hardware or other hardware as specified by Varian to perform as
described in the accompanying Operator's Manual and to be substantially free of those defects which cause failure to
execute respective programming instructions; however, Varian does not warrant uninterrupted or error-free operation.

Remedies

The sole and e
opinion are due or traceable to defects in original materials or workmanship or, at Varian's option, replacement of the
respective defective parts, provided that Varian may as an alternative elect to refund an equitable portion of the
purchase price of the instrument or accessory.
Repair or replacement under warranty does not extend the original warranty period.
Repair or replacement under warranty claims shall be made in Varian's sole discretion either by sending a Customer
Support Representative to the site or by authorizing the Customer to return the defective accessory or instrument to
Varian or to send it to a designated service facility. The Customer shall be responsible for loss or damage in transit and
shall prepay shipping cost. Varian will return the accessory or instrument to the Customer prepaid and insured. Claims
for loss or damage in transit shall be filed by the Customer. To correct software operation anomalies, Varian will issue
software revisions where such revisions exist and where, in Varian's opinion, this is the most efficient remedy.

ware is provided within the frame of a license agreement concluded between the Customer and Varian, any

xclusive remedy under hardware warranty shall be repair of instrument malfunctions which in Varian's

Limitation of Warranty

Thi

s warranty does not cover software supplied by the Customer, equipment and software warranted by another
manufacturer or replacement of expendable items and those of limited life, such as but not limited to: Filters, glassware,
instrument status lamps, source lamps, septa, columns, fuses, chart paper and ink, nebulizers, flow cells, pistons, seals,
fittings, valves, burners, sample tubes, probe inserts, print heads, glass lined tubing, pipe and tube fittings, variable
temperature dewars, transfer lines, flexible discs, magnetic tape cassettes, electron multipliers, filaments, vacuum
gaskets, seats and all parts exposed to samples and mobile phases.
This warranty shall be void in the event of accident, abuse, alteration, misuse, neglect, breakage, improper operation
or maintenance, unauthorized or improper modifications or tampering, use in an unsuitable physical environment, use
with a marginal power supply or use with other inadequate facilities or utilities. Reasonable care must be used to avoid
hazards.

This warranty is expressly in lieu of and excludes all other express or implied warranties, including but not
limited to warranties of merchantability and of fitness for particular purpose, use or application, and all other
obligations or liabilities on the part of Varian, unless such other warranties, obligations or liabilities are
expressly agreed to in writing by Varian.

Limitation of Remedies and Liability
The re

medies provided herein are the sole and exclusive remedies of the Customer. In no case will Varian be

liable for incidental or consequential damages, loss of use, loss of production or any other loss incurred.

Spare Parts Availability

It is the policy of Varian to provide operational spare parts for any instrument and
major accessory for a period of seven (7) years after shipment of the final
production run of that instrument. Spare parts will be available after this seven (7)
year period but on an as available basis. Operational spare parts are defined as
those individual electrical or mechanical parts that are susceptible to failure during
their normal operation. Examples include relays, lamps, temperature probes,
detector elements, motors, etc. Sheet metal parts, structural members or
assemblies and castings, printed circuit boards, and functional modules are
normally capable of being rebuilt to like-new condition throughout their useful life
and therefore will be supplied only on an as available basis after the final
production run of the instrument.

Service Availability

Varian provides a variety of
services to support its customers
after warranty expiration. Repair
service can be provided by
attractively priced service
contracts or on a time and
material basis. Technical
support and training can be
provided by qualified personnel
on both a contractual or as­needed basis.

Varian Analytical Instruments Sales Offices

For Sales or Service assistance and to order Parts and Supplies, contact your local Varian
office.

Argentina

Buenos Aires
Tel. [phone]

Australia
Mulgrave, Victoria
Tel. +61.

Austria
Poettelsdorf
Tel. [phone]

Benelux
Middelburg
Tel. [phone]

Brazil and Latin America (S)
São Paulo
Tel. [phone]

Canada
Mississauga, Ontario
Tel. [phone]

China
Beijing
Tel. [phone]

Europe
Middelburg, The Netherlands
Tel. +31.118.671.000

3.9560.7133

France
Les Ulis Cédex
Tel. [phone]

Germany
Darmstadt
Tel. [phone]

India
Mumbai
Tel.
+91.22.2570.8595/97

Italy
Torino
Tel. [phone]

Japan
Tokyo
Tel. [phone]

Korea
Seoul
Tel. [phone]

Mexico and Latin
America (N)

Mexico City
Tel.
+52.5.55.5239465/026

Russian Federation
Moscow
Tel. [phone]

Spain
Madrid
Tel. [phone]

Sweden
Solna
Tel. [phone]

Switzerland
Steinhausen
Tel. +41.848.803.800

Taiwan
Shih-Chi
Tel. [phone]

United Kingdom and
Ireland

Oxford
Tel. [phone]

Venezuela
Caracas
Tel.
+58.212.285.0320/2494

United States

Walnut Creek, California,
USA
Tel. [phone]
(GC and GC/MS)

Tel. [phone] (LC)

http://www.varianinc.com/