Varad i-Security-Touch VS-702 User Manual

1

Varad International, Inc.

VS-702 USER MANUAL

Product Name: i-security-touch

Model Name:VS-702
1-Way Remote :4751VS

2-Way Transceiver / Antenna :3621VS,

Remote function table:

Remote command Buttons Key Conditions

Arm

P1K1

Disarm

P1K2

Lock

P1K1 Ignition on

Unlock

P1K2 Ignition on

Silent Arm

P0K1

Silent Disarm

P0K2

Car finder

P1K1 Arm state

Anti-hijack

P0K4 Ignition on

Panic

hold 2 sec

P0K4 Ignition off

Two stage unlock

hold 2 sec / press times

P1K2 See function program

Shock bypass

P1K1

Activate Channel 1

hold 2 sec

P1K3 See function program

Activate Channel 2

hold 2 sec

P1K1 See function program

Activate Channel 3

P11K1 See function program

Activate Channel 4

P11K2 See function program

Activate Channel 5

P11K3 See function program

Activate Channel 6

P11K4 See function program

Remote engine start

hold 2 sec

P1K4

Remote engine shut

down

P1K4

Arm with engine

running

P8K1

Engine run (by ignition

key)

2

Outside view:

MAIN PAGE:

Press KEY to display Page 0: press anywhere in touch area to display PAGE ONE

PAGE ONE:

3

Press Forward or Backward button display other page

Other PAGES:

Button define is same as PAGE ONE,such as : P11K3 is CH5 button in p11

When transmitter received the car alarming will play trigger movies and sound voice:
The move will be stopped,if the key pressed

Cancel count down: set count down =00:00
Cancel alert time: set alert time =00:00
Cancel PIN code: set PIN code =000000

4

Button in other page function table:

Buttons Key Explain Buttons Key Explain

P2K1 Set park time

P2K2

Set park
position

P7K2 Set car loge in p0

P2K3

Set count down

time

P7K3 Set English menu

P2K4 Clear trigger

P7K4 Set Spain menu

P3K1 Set alert time

P8K1 Engine run

P3K2 Set time display

P8K2

Get

vehicle battery volt

P3K3

Set VIBR.

Melody and key

tone

P3K4 Show DEMO

P8K4 Get the outside temperature

P4K1 Set backlight

P9K1 Set daily start

P4K2 Set light delay

P9K2 Set count down start time

P4K3

Set currently

time

P9K3 Power save on

P4K4

Set handset PIN

code

P9K4 Power save off

P6K1

Set currently

car to 1st and set

car name

P10K1 Silent arm key

P6K2

Set currently

car to 2nd and

set car name

P10K2 Silent disarm key

P6K3

Set currently

car to 3rd and

set car name

P10K3 Arm without ZONE

P6K4

Set currently

car to 4th and

set car name

P10K4 car jack key

5

1. Arm

Press

button once, system will chirp once, parking lights flash once, lock the doors,

starter disabled, window close output 1 sec. (if CH4 programmed), status LED start to flash
slowly, will chirp 4 times and parking lights flash 4 times if door or hood or trunk isn’t closed
well while arming, and will not detect the door (hood, trunk) open until there are full closed

well. The system can be triggered 5 second after armed if choosing “off” in program feature
A-3. In other case see program feature table description.
Shock sensor can be trigged after armed in program feature A-3.

2. Disarm

Press button once, system will chirp and flash twice, unlock the door, turn on dome
light, LED flash rapidly 30 sec. (if rearm function ON and off when door or trunk open or
ignition turn ON). IF system was alarmed in arm mode (except warning zone of shock sensor)
then if disarm siren chirps 4 times.
IF system was alarmed in arm mode, Transmitter will chirp 4 times and show triggered detail
record include trigger zone name, time, date.

3. Silent Arm

Press button , system will arming without chirp.

4. SILENT DISARM

Press button , system will disarm without chirp.

5. Alarm mode

The siren will sound, parking lights flash 30 sec. if door or hood or trunk is opened or ignition
key is turned on or triggered main zone of shock sensor. If trigged warning zone of shock
sensor siren chirps 6 times.

To stopping alarm press button or .
Number of alarm hasn’t to be more than 5 times for each zone.

6. Trigger zone display

6

When system is alarming or after disarming, if the LED quick flashes several times and then 1
second pauses, it indicates the system has been triggered, and the times the LED flashes
indicate the zone that was triggered, as below:

Twice: AUX 4 PIN 1 heavy trigger
3 times: AUX 4 PIN 2 heavy trigger
4 times: TRUNK
5 times: DOOR
6 times: HOOD
7 times: IGN

7. Arm without ZONE

Press button

, once to set arming, siren chirp, parking lights flash once,

build in shock sensor will be bypassed, other sensor is normal.
Aux sensor 1 and sensor 2 will be bypassed, other sensor is normal.

8. Arm with engine running

While engine is running and the key at ignition ON position press button , parking
lights flash, transmitter sounds. Then get out ignition key (engine goes on running! hand brake

must be pull up). Press button system will chirp once, parking lights flash once. Engine
will be running 15, 30, 45 or unlimited time period (according the program features F-3) then
shut down and system. Shock sensor is bypassed at this period.

Press button once to shut down engine. Parking flash once for confirm.
Engine also shut down when alarm.

9. Auto rearm

System will be rearm and relock if no any door (or trunk) opens or ignition key turn on within
30 seconds after disarmed. It’s programmable function – see program features B-1.

10. Passive arming / Arming reminder

Ignition is off after driving, open the door, leave out and close it. the system will
automatically armed after 30 sec. Passive arming still no lock door. It’s programmable
function – see program features B-2

11. Immobilizer

At immobilizer mode system automatically enter starter disable relay (w/o arm) after 30 sec
from ignition turn off. At this mode LED flash when ignition ON.

12. Two-Stage unlock

Press button will unlock driver’s door only. Hold button for 2 seconds or press