Vantech HD-CVI User Manual
VP-454CVI
VP-854CVI
VP-1654CVI
INDEX
Chapter 1 Products Introduce .................................................................................................................... 3
1.1 Technical Parameter .......................................................................................................................................................... 3
1.2 Performance .......................................................................................................................................................................... 4
Chapter 2 Hardware ........................................................................................................................................ 5
2.1 H.264 standalone 4CH/8CH DVR .................................................................................................................................. 5
Chapter 3 Operation ....................................................................................................................................... 9
3.1 Operation instruction ........................................................................................................................................................ 9
3.2 Powering On ....................................................................................................................................................................... 11
3.3 Shutdown ............................................................................................................................................................................. 13
3.4 Multi Channel ..................................................................................................................................................................... 14
3.5 Preview ................................................................................................................................................................................. 14
3.6 Recording operation ....................................................................................................................................................... 14
3.7 Playback video .................................................................................................................................................................... 15
3.8 How to control PTZ ......................................................................................................................................................... 16
3.9 Alarm control ...................................................................................................................................................................... 18
3.10 Display Adjust.................................................................................................................................................................. 18
Chapter 4 Menu Operation Guide ........................................................................................................ 19
4.1 Recording Setup ................................................................................................................................................................ 19
4.2 Camera .................................................................................................................................................................................. 21
4.3 Network Setup ................................................................................................................................................................... 24
4.4 System Setup ...................................................................................................................................................................... 29
4.5 System Management ...................................................................................................................................................... 32
Chapter 5 IE Preview ................................................................................................................................... 35
5.1 Logging on interface ....................................................................................................................................................... 35
5.2 System Settings ................................................................................................................................................................. 36
5.3 State control ........................................................................................................................................................................ 39
Chapter 6 QMEYE phone software for use ..................................................................................... 43
6.1 Instructions of Android.................................................................................................................................................. 43
6.2 Instructions of IPhone .................................................................................................................................................... 61
Chapter 7 FAQ (Frequently Asked Questions) ............................................................................. 77
Power
This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine.
If do not use the machine for a lon g time, ple as e turn off the p ower of DVR machine, and let the electric plug
away from power socket.
Safety
This DVR only for in door use, as for pr event shor t circuit or elec tric d anger, please do not let the D VR in the
raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified
technician check it before reboot the DVR;
The DVR is the precision machine, there is nothing for repair by customers thems elves in it, when it break
down, please ask the qualified technician to check and repair, or contact with the agents of it.
Installation
Please keep the DVR in level for installation.
Pay attention to equipment ground.
For the first time to install the DVR, please make sure if the hard disk drive install or not.
Prevent to open the case and change the hard disk drive in electrified.
Propose to select the performance of hard disk drive will be 7200 rotating speed person second.
Please select the appropriate ins tallation site, so let t he air can be free flow inside the DVR, prev ent the
machine overheating.
Please do not install the DVR nearb y the radiator, air chute etc. heat s ource,or where the direct s unlight, too
much dust, or mechanical vibration or attack.
Chapter 1 Products Introduce
1.1 Technical Parameter
Compression standard
H.264 baseline profile@L3.1
Video input
Composite 1.0Vp-p/75Ω,BNC×4/ BNC×8
Video output
Composite 1.0Vp-p/75Ω,HDMI×1, VGA×1
Resolution Preview SDI 1080P（PAL）， 1080P（NTSC）
CIF 352×288（PAL）， 320×240（NTSC）
Recording SDI 1080P（PAL）， 1080P（NTSC）
CIF 352×288（PAL），320×240（NTSC）
Frate rate Preview/ recording
4ch 100fps(PAL), 120fps(NTSC
8ch 200fps(PAL), 240fps(NTSC)
Audio input
-8dB~22k,RCAx4(4ch)
Audio output
-8dB~92dB,RCAx1
Audio decode
ADPCM
Alarm input Input low level alarm, user setting normal open or normal close, Varies
according to the model
Alarm output 1ch output; Varies according to the model
Recording mode Manual recording, timing recording , motion detection recording and external
alarm recording
Simplex/duplex/ triplex
triplex(recording, playback , LAN transmission)
LAN
RJ45(10M/100M self-adapting)
PTZ control
Yes
Communication
RS485×1，USB2.0×2
USB
USB mouse control
Hard disk drive
4x SATA（4TB or bellow）
Remote control unit
Yes
Dimension
Main board size : 230mm x 110mm
Power supply
AC110-230V
1.2 Performance
Real-time
monitoring
Turn-by-turn analog video output and
VGA interface, according to TV monitor
or VGA monitor to live view in 1/4/8/9 or
more video channel to monitoring the
recording streaming and the record file
capacity in Every hours every channel, to
presentation the status of video channel,
recording, dynamic detection, v ideo los s,
monitoring lock-
up. You can view the
system log in local DVR.
Storage
function
Internal 4 SATA interface, MAX
4TB hard disk drive, the file of har d disk
drive include cover mode circulation
recording and none cyclical recording,
the storage data to use the proprietary
format, can not falsify the data, make
sure the data safety.
Compression
format
Video compression format:: H.264
Support 8ch video and audio signal,
video and audio maintaining stability in
synchronous.
Backup
function
Through USB interface to backup. ( for
example USB drive and mobile hard
disk drive etc.) The video file can be
downloaded by Client software through
LAN to laptop hard disk drive.
Recording
and
playback
function
* Multiplex, to achieve real time recording
to be independent at the same time to
single channel playback, research and
backwards, network monitoring, network
search download etc.
* Multiple recording mode: Manual,
normal, alarm, linkage, dynamic
detection recording etc. turn-by-turn
pre-recording function.
* Can playback the record file in DVR
through network, to achieve quick-search
the recording file and recording type,
multiple playback type: SLOW, Fast
Forward, Backwards, step Forward.
Display the exact time of event occurred
while recording file playback.
Network
Operation
function
* through network to real time remote
monitoring;
* PTZ control
* recording research and real time
playback;
* system setting parameter modify and
the system software upgrade;
* remote monitoring alarm pr ocess and
view the system log message;
* to use embedded TCP/IP protocol and
Embedded Operation System, can
access the DVR through client software
program bundle in the package;
*Management Model: use enhancement
user management, password mode to
make sure the valid user to login the
system, flexible convenient and fast to
set the different permission user
requirement.
Alarm
linkage
function
4ch alarm input (alarm event mode can
be set normal open or normal close
selection), and turn-by-turn video loss
alarm, dynamic detection alarm, the
alarm device may be smoke detection
censer, temperature
detector, IR
detector. Possess 4ch relay switch
alarm output, flexible convenient and
fast to achieve alarm linkage and
lighting control at site.
They’re possess protective circuit in
Alarm input and alarm output port,
make sure the device not to damaged.
Communication
port
* Possess specific interface, achieve
alarm input and PTZ control;
* possess a standard Ethernet interface,
achieve the ne
twork remote
monitoring.
PTZ
control
* Support PTZ decoder through RS485
communicate
* scalable multiple decoder protocol,
easy to achieve to control the pan
driver and speed dome camera
function.
Intelligent
operation
* mouse operation function;
* In menu for same setting and to
process shortcut copy operation
Chapter 2 Hardware
2.1 H.264 standalone 4CH/8CH/16CH
2.1.1 Hard disk Installation
For the first use, please install the hard disk
○
1
E
ARemove the screws on both A○
2
E
Aextracted from the next cover up A○
3
E
Aconnect hard disk and mother board
sides of shell
A○
4
E
Afix the screw of hard disk A○
5
E
Aclose cover A ○
6
E
Ainstall the screws on both sides of shell
2.1.2 Rear panel
4CH
Item
Interface
Description
1
VIDEO-IN
4ch video input 2 AUDIO IN
4ch audio input
3
HD-OUT
HDMI output 4 A/V OUT
AUDIO and VIDEO output
5
VGA
VGA monitor 6 NETWORK
RJ45 for internet
7 USB First USB for backup or upgrade s ystem of DVR; Second
USB for mouse 8 ON/OFF
Power supply switcher
9
DC-12V
Power adaptor port
10
ALARM IN：1 2 3 4 alarm input port
RS-485：A, B
ALARM OUT: N1 alarm output port, every channel connect
GND
、OUT、COM;
every two channel OUT, COM port is for GND;
8CH
Item
Interface
Description
1
VIDEO-IN
8ch video input 2 AUDIO IN
8ch audio input
3
HD-OUT
HDMI output 4 VGA
VGA monitor
5
NETWORK
RJ45 for internet
6 USB First USB for backup or upgrade system of DVR; Sec ond
USB for mouse
7 ON/OFF Power supply switcher
8
DC-12V
Power adaptor port
9
ALARM IN：1 2 3 4 alarm input port
RS-485：A, B
ALARM OUT: N1 alarm output port, every channel connect
GND
、OUT、COM;
every two channel OUT, COM port is for GND;
16CH
Item
Interface
Description
1
VIDEO-IN
8ch video input 2 AUDIO IN
8ch audio input
3
HD-OUT
HDMI output 4 VGA
VGA monitor 5 NETWORK
RJ45 for internet
6 USB First USB for backup or upgrade system of DVR; Sec ond
USB for mouse
7 ON/OFF Power supply switcher
8
DC-12V
Power adaptor port
9
ALARM IN：1 2 3 4 alarm input port
RS-485：A, B
ALARM OUT: N1 alarm output port, every channel connect
GND
、OUT、COM;
every two channel OUT, COM port is for GND;
2.1.3 Alarm input port
4chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);
The GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by
external power supply;
The ground terminal of alarm detector join-up in parallel with DVR;
The NC of alarm detector connect with the input end (alarm) of DVR;
When you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR,
for example, smoke detector.
When you select the external power supply, please share the GND with DVR;
Alarm input circuit:
Alarm inlet connection:
2.1.4 Alarm output port
4 way switching value alarm output, selectable in normally open contact, also selectable in
normally closed
contact, the external
alarm device should
be need VCC;
Chapter 3 Operation
3.１Operation instruction
3.1.1 Remote control AND Front panel keypad
Table
：
S/
N
Keypad
Name
Operating
instruction
S/
N
Keypad
Name
Operating
instruction
1
【
】
Power ON/OFF
13
【 ENTER 】
【OK】
This button is used as “ enter ”
and “ ok ” key in most
circumstances
2
【REC】
To mode of recording
3
【MENU】
Access main menu
4 【ESC】
Exit operation or enter upper
menu
Close soft keyboard
Close current window
Exit from current control
Return to last menu
Exit from PTZ control under
preview state
14 【PTZ】
Access/exit from PTZ control
under preview state
5
【 】
Switching of 1/4/8/9 Preview
mode
15 【+/-】
Volume or number
increase/reduction Select item
of the list
6 【FN】 Short cut 16
【 ZOOM/ ▲
/▼】
Lens control
7
【
】
Slow playback,1/2×, 1/4×,
1/8× and single frame play
17
【 FOCUS/
▲/▼】
Aperture control
8
【
】
Fast playback, 2×,4× and 8×
playback
18 【0~9 10+】
Digital input Corresponding;
Channel is magnified in full
screen under preview state
19
【】 delete
20
【--】 Single and double switch
9
【 】 Playback stop 21
【 】
Mute sound
【 】
Play / Pause
22
【 Display
】
Display setup
【 ▲.▼.
】
Four-way to move the focal
point in main menu, up and
down to move in the normal
window, to control pan driver
to move in
the PTZ control windows
【 】
Speed normal 23
【Backup】 backup
10 【WIZARD】 The wizard menu
24
【SEQ】 start/stop SEQ display
11 【DEV】
Selection of equipment, such
as modify the address of
remote control
25
【ALARM】 Alarm reset
12
【
SEARCH】
Search for playback time
choosing
26
【CLEAR】 Clear alarm
3.1.2 How to use mouse of DVR (for right hand mouse)
1 Left key single click
To any function menu icon click the mouse left key into the menu
To run the control point out operation
Change again select frame or motion detection piece mode
Click the assemble frame popping to pull down the list
In the input frame, can select digit, character, lowercase, block letter, left click
mouse on the keyboard of character input, that’s. ← say move back,
＿ say
blank，Shift say switch case .
2 Right click mouse
Right click mouse, popping the shortcut menu, as follows;
Through the menu can be switching preview screen window mode, start
replays, PTZ control. Four pictur es pla yback m ode, the point of the rig ht m ouse
button, Can in a single pic ture, four pictures, eight pic tures (8 road playback)
, ,
broadcast control switch view show or hide broadcast control bar.
3
Double click left
button
To run the ActiveX Control Activ eX s pec ial operation, F or exam ple, do uble click
the certain item of record listed file, then the system will playback the segment
record video.
4
Dragging the mouse
Depress the left key and dragging the mouse, banding selec t Motion detection
area, depress right key of mouse and Dragging, cancel the banding select area.
Dragging playback Progress Bar back and forth to dolly m oves, to achieve the
playback position adjustment. Dragging the audio and video regulation
parameter bar dolly moves, to achieve the parameter adjustment.
3.2 Powering On
Boot-strap
If【POWER】pilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR begin to start, by now, if the
DVR still inactive, to enter the next step;
Second step: turn on the power supply of the DVR at the back panel, DVR begins to start.
If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR begins to start.
set user：admin Password：Don't need to input
The video output mode of DVR ’s the defa ult s etting is m ulti p ic ture channel mode after starting the D V R , if th e
time of start the DVR is in the Timing Recording Setting, the DVR will automatically to start the Timing Recording
function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.
Button
Description
Button
Description
Main Menu
PTZ control
Wizard language
Alarm control
Multi channel
Display setup
Recording Control
Exit
Playback Back up
If before starting, the s ystem not to ins tall hard disk, into the s ystem, will tip: s ystem didn't de tect any ha rd disk
connection!
Note:
In this dialog you can select language and quickly set lots of parameters.
Generally，the hisilicon system includes the following 22 kinds of languages:
simplified Chinese, English, Italian,
Turkish, Thai,
Russian, Japanese, French, Portuguese, Spanish, Hebrew, Traditional Chinese, Polish, Korean,
Persian, German, Srpski, Czech, Greek, Arabic, Indonesia, Vietnamese language and so on.
3.3 Shutdown
There are two safety mode for Shutdown
Enter【Exit】,select【Power Down】.
Abnormal shutdown
Through the rear panel to shutdown
During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much
as possible to do it. (especially while the DVR recording).
Directly to pull up the power cable of DVR
While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it.
(especially while the DVR recording).
Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operat ion, the
DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply .
3.4 Multi Channel
1/4/8/9 preview screen mode switch
3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on
the picture, re setting the dat e. There is a alarm input mode icon. (the meaning of ever y kind of icon as following
table)
Channel picture attention
3.6 Recording operation
Customer according needs to select t he dif f erent k ind of reco rding mo de in th is sy stem. F or the
different kind of recording mode you set, the channel w ill be showed the mark on everyone channel.
Manual recording
Note: Manual recording operational requirement the user should have “recording” permission.
Please make sure the hard disk drive has been installed and it has been formatted.
1
）
Input manual recording operation menu
Single click right key of mouse or In main menu=> r ecording control can into manual recording operation menu.
Under preview mode, press REC key or on the Remote controller unit k ey into recording control operation m enu, as
follows:
1
Channel is video when channel
video pictures showed this symbol
2
Channel happen when dynamic
test, channel video pictures
showed this symbol
3
Channel open sound, the channel
video pictures showed this symbol
2) The explanation of manual recording operation menu
【Manual Rec】 Priority level highest, no matter currently what status of every channel, after carry out the
manual press, corresponding channel will be record common in progress;
【Automatically】Setting channel recording by setting condition to record under Timing, Motion detection and Alarm
in Recording Setting;
【Stop Rec】All video channel stop recording;
3.7 Playback video
Button Description Button Description
Synchronous/asynchronous play
Hide / display list
Speed slow
recording date
Speed normal Recording Date
Speed fast Select Playback Time
Sound off/on Play/pause/stop
Voice adjustment
rewind
1/4/8/9/16/24/32 screen(switch
image)
Note:
1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc.
information in the Playback control panel;
2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;
3) Can drag the Playback Speed toolbar by mouse;
4) In this dialog you can select the video precise to the second.
3.8 How to control PTZ
【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control.
【Focus】Slight adjusting the focal length
【Iris】Aperture size adjustment
【Speed】Through the slider adjust rotation step interval, PTZ mainly used to control direction operation, the step
length of turning the faster PTZ.
【Preset】Adjust the camera Angle, direction , the corresponding input and clicking on 【setup】 button, preset points
will be set in the present PTZ.
Input preset points and click on【Transfer】button, the camera will be transferred to the preset point corresponding
position. Click【clear】button, this preset points will be cleared
【Setup】Click 【Pattern Start】 the trajectory of said no corresponding, click the 【 Add Preset 】 and 【 Delete
Preset】, 【Clear Tour】 the cruise lines.
【Pattern Start】begin to track record, was registered date 【Pattern S top】，thus set up from the corresponding track
circuit.
【Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit
scanning.
【Add Preset】Add preset points to the cruise lines.
【Delete Preset】Cruise lines from deleting preset points.
【Clear Tour】Remove the cruise line designated.
Note: some equipment doesn't fully support all function, depending on the specific PTZ equipment
【Control】PTZ Control
【Tour Scan】Point between cruise control.
【Pattern Scan】Track patrol control.
【PTZ Reset】Remove all Settings, original reset to the original state.
【Limit Scan】PTZ boundary scan control.
【Auto Pan】Remove the cruise line designated
Note: some equipment doesn't fully support all function, depending on the specific PTZ equipment.
3.9 Alarm control
【Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status
【Clear Alarm】Remove protection condition, not alarm input to react
【Alarm Output】Open the alarm output. In the prem ise of no trigger alarm input, user can operate the output. for
example, some alarm switch is connected with a lamp, lamp is open when alarm is triggered
【All】Can choose all the channels
3.10 Display Adjust
(1)
Video
【Video Effect】Optional: standard, downy, sharp, custom.
【Default】Restoring default effect, for custom video effects, copy standard effect parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(2)Monitor
【Device】Optional: VGA output, TV output etc display output device.
【Default】Restoring default display parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(3)Setup
【Device】VGA Output + HDMI Output + TV Output.
【Resolution】Setting the resolution of the display device.
The default VGA resolution is 1280 x 1024;
Chapter 4 Menu Operation Guide
4.1 Recording Setup
(1) Recording Setup
【Channel】Choose the need to install passage "whole" says setting all channels.
【Encoding Type】720P
【Encoding Mode】Including fixed rate, dynamic rate.
【Image Quality】Client-s ide imag e qual ity, the higher the quality the c learer. Choice scope: minimum , low, general,
high, highest
【Frame Rate】Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second
(NTSC) continuous adjustable.【Audio】Can select close, open according to requirements
【Pre-Alarm Rec】Can select close, open according to requirements
(2)Sub-Stream
【Channel】Choose the need to install passage "whole" says setting all channels.
【Encoding Type】you can select one coding mode in this page.
【Frame Rate】Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second
(NTSC) continuous adjustable.【Audio】Can select close, open according to requirements. But now only support 1-5.
【Image Quality】Client-s ide imag e qual ity, the higher the quality the c learer. Choice scope: minimum , low, general,
high, highest.
(3)Channel Overlay
【Channel】Choose the need to install passage "whole" says setting all channels.
【Channel Name】Can manual corresponding input channel's name
【Channel Display】Can choose according to the r equirements of users don't use, the top-left corner, left, lower,
middle and downward, upper, right, and lower.
【Time Display】Can choose according to the requirements of us ers don't use, the top-left corner, left, lower, middle
and downward, upper, right, and lower.
(4)Recording Schedule
【Channel】Choose the need to install passage "whole" says setting all channels.
Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key
click on the small square footage, setting time to clean it has chosen right-click drag video time.
4.2 Camera
When the system starts, the camera will detect the format of the video.
(1) PTZ Setup
【Channel】Choose regional channels, Settings "whole" says setting all channels
【PTZ Protocol】PTZ equipment communication protocol
It contains these options: Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、
RM110、SAMSUNG，the default option is Pelco_D.
★Note:
PTZ parameter Settings every channel need after completion in Settings of gc1318 alone.
【PTZ Address】PTZ equipment address, digital range 0 to 255.
★Note:
here with the address must be consistent ball machine address, we can't control the ball machine.
【Bit-rate】PTZ equipment baud rate.
(2)Video Setup
【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system
can take effect.
【Channel】Choose to set the video Settings area passage "whole" says setting all channels
【Reserved Section】Click Settings enter. The white areas for privacy area
【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning
【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output
(3)Motion Detection
【Channel】Choose need to set up mobile testing area passage "whole" says setting all channels
【Sensitivity Setting】Can be set to give: minimum, low, general, high, highest
【Detection Area】Click Settings enter.
Green area for dynamic test, grey areas design. ferroconcrete-brick undefended area for. Press the mouse left key
to drag on the lower detection area to the right, pres s the mouse button clearance. D etection area drag The sav e
and exit button can save Settings, some give up and quit button abandon modification.
【Buzzer Alarm】Occur when dynamic test on the buzzer whether to allow the alarm
【Trigger Recording】That will happen when dynamic test on the linkage of selected channel fast ball trigger video
【Alarm Output】In this passage setting user can be copied to the other channels, fulfill the same dynamic detection
alarm Settings
(4)SEQ Display
【Time】Screen switching interval.
4.3 Network Setup
(1)General Setup
【DHCP】After checked automatic assignment device will get IP address, subnet mask, the default gateway , the DNS
server, etc
【UPnP】Can choose according to the requirement
【IP Address】Network logic address can according to the requirements set
【Subnet Mask】Server subnet mask
【Default Gateway】Server gateway
【DNS Server】DNS server addresses
Loading...