Vanraam Twinny, Kivo tricycle, Twinny Plus, Kivo User Manual

Van Raam BV
Aaltenseweg 56
7051 CM Varsseveld
The Netherlands

User manual

Version 14.10

Kivo

Kivo tricycle

Twinny Plus

Twinny

2

User manual
Tandems 14.10

Table of contents

Table of contents ......................................................................................................... 2

Contact details manufacturer ....................................................................................... 2

Conformity ................................................................................................................... 2

Introduction .................................................................................................................. 3

Delivery ....................................................................................................................... 3

Intended usage ............................................................................................................ 3

Safety measures ......................................................................................................... 4

Delivery inspection ...................................................................................................... 5

Adjustment of the bicycle............................................................................................. 5

Accessoires ................................................................................................................. 8

Before first use .......................................................................................................... 22

Technical details ........................................................................................................ 26

Maintenance and adjustments to be done by owner ................................................. 26

Repairs and maintenance to be done by dealer ........................................................ 29

Disposal..................................................................................................................... 29

Handover/sale to a new owner .................................................................................. 29

Guarantee ................................................................................................................. 29

Frame number ........................................................................................................... 30

Contact details manufacturer

Van Raam BV
Aaltenseweg 56
7051 CM Varsseveld
The Netherlands

Tel. : [phone]
E-mail : [e-mail]
Internet : www.vanraam.com

Conformity

Van Raam declares as manufacturer that the Tandem bicycles have been produced
in accordance with the 93/42/EEC guidelines.

3

User manual
Tandems 14.10

Introduction

This user manual gives important and necessary
information about the use of your tandem bicycle.
We ask you to go through the manual thoroughly before
using the bicycle.

Delivery

- bicycle with possible packaging

- user manual(s)

- possible charger(s), depending on options

- sparekey(s)

Intended usage

The tandem bicycle is designed for normal use on a level and solid surface. The
usual bicycle caution should always be taken into consideration. At the same time all
safety instructions as described in this manual should be complied with explicitly. Also
the local traffic rules should always be complied with.

All other use, including damage or physical injuries due to this, are not the
manufacturer's responsibility.

READ
THOROUGHLY

4

User manual
Tandems 14.10

Safety measures

 There should always be a responsible supervising person as

the main driver of the bike. This main driver is always responsible for the

safe use of the bike.

 Make sure that no dangerous speed develops when driving downhill and

entering tunnels. Brake on time and don’t ride faster than 30 kilometres per

hour.

 If an electric motor is present on the bicycle: familiarize yourself with the

functions of the electric motor. Always pay attention when you turn on the
motor and do not be surprised by the sudden behavior of the electric motor.
There is a reversing feature present on the Twinny Plus and Kivo tricycle.
Practice the reverse function! Please be careful not to switch on the reverse
function of the electric motor inadvertently.

 Please ensure you check each time before the bicycle is used, the bike must

be in good condition. Before each ride, check that the operation of the
brakes is working correctly, the lights are functioning well, and make sure
there is enough air in the tires.

 Regularly check the wheels, and ensure that the handle bar and the seat is

fixed tightly and also that all screw connections are tight enough.

 Only use the bicycle on a solid and level surface.
 Make sure that wide trousers or lose hanging clothing don’t get caught in the

chain, spokes or pedals.

 Do not use a pressure washer or a steam cleaner for the cleaning of the

bicycle.

Extra attention is essential if a child is using the bicycle!

 Never leave a child alone with the bicycle without supervision!
 Always have the child wear a bicycle helmet! Make sure the helmet fits

correctly!

5

User manual
Tandems 14.10

Load

The maximum load should not be exceeded. See information in the index of technical
details on page 26. By permitted load we mean the total load, including the load on
the luggage rack.

Make sure that the permitted load on the luggage rack is not exceeded.

Damaged or worn out parts

The replacement and repair of parts (frame, forks, illumination, brakes, drive
mechanism and the handle bars) should always be performed by a dealer. If not, the
guarantee ceases to be valid and you will be personally responsible in the event of
possible damage.

Specific safety parts should always be replaced by new parts!

Delivery inspection

Check the delivery immediately after receiving it. In the event of damage or
incomplete delivery we ask you to contact your dealer immediately.

Adjustment of the bicycle

Before using the bicycle, adjust it to the measurements of the cyclists. This is of great
importance, especially the saddles and the handlebars.

If an optimal adjustment of the bicycle, as defined in the instructions, is not
possible, you can contact your dealer for a fitting solution.

The brakes are correctly adjusted as standard and can only be adjusted by the dealer
during periodic maintenance.

6

User manual
Tandems 14.10

MIN INSERT

Saddle height

When the cyclist is sitting on the bicycle
and can put a foot on the pedal in the
lowest position, the saddle height is
correct. Adjust the saddle height in such a
way that the leg is stretched but relaxed in
that position.

To adjust the saddle:

1. Open the quick-clamp [A].

2. Slide the saddle to the correct height.

3. Close the quick-clamp.

Make sure clothing cannot get
caught in the clamp!

If the clamp closes too easily, the
clamping force is too low. In this case,
open the clamp and tighten the nut (B)
a bit more. If a lot of force is necessary
to close the clamp, the nut should be
loosened slightly.

Do not pull out the saddle pin further than the
marking. The tube will not go into the shank deep
enough and will risk coming off. This can lead to
serious injuries.

[B]

[A]

7

User manual
Tandems 14.10

MIN INSERT

Handle bar height

The height of the handle bars affects the
comfort of the ride. It determines the pressure
on the hands and the position of the back.
Determine your own most comfortable height
by using the bike.

To adjust the handle bar:

1. Loosen the screw with an Allen wrench a
few turns.

2. Slide the handle bars to the desired
height and tighten the screw firmly again.

Do not pull out the handle bars further than the
mark. Otherwise the tube will not be deep enough
in the shaft and will risk coming off, which can lead
to serious injuries.

Position handle bars

You can tilt the handle bars. This influences
the distance from the handle bars to the upper
body. Determine your own most comfortable
position by using the bike.

To tilt the handle bars:

1. Loosen the screws [A] and [B] with an
Allen wrench a few turns.

2. Place the handle bar in the wanted
position and turn the screws tightly
again.

3. Turn screw [C] with an Allen wrench a
few turns. Place the handle bar in the
correct position (straight) position and fix
the screws tightly again.

1.

2.

[A]

[B]

[C]

8

User manual
Tandems 14.10

Accessoires

Depending on your order, you can use the accessories as described below.

Crank shortener

The crank shortener is fitted to the crank,
as illustrated. The pedal can then be fitted
into the crank shortener at two positions.
With the socketed screw (A) the crank
shortener should be aligned with the
crank.

Foot support

The foot support is fitted to the pedal with a
balance block. First the pedal spreader must
be adjusted.

2 assembly points pedal

[A]

[A]

9

User manual
Tandems 14.10

Lower leg support

To fit the lower leg support:

1. First fit the lower leg support to the metal
plate (A).

2. The lower leg support is then fitted to the
foot support. Make sure that plate (B) is
under the pedal and plate (A) is between
the pedal and the foot support.

3. Adjust the height of the lower leg support
in such a way that it matches the lower
leg of the cyclist.

4. Fit the elastic to a point on the frame, so
that the lower leg support stays upright
in stationary position. Determine by
yourself which point is best.

Use the Velcro to secure the lower leg.

[A]

[A]

[B]