Vanderbilt CHSM2210, CHSM2211 Installation Manual
CHSM2210/2211
Medium Camera Housing
Installation Guide
© Vanderbilt 2016
2
Data and design subject to change without notice. / Supply subject to availability.
© 2016 Copyright by Vanderbilt
We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights
and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our
prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.
© Vanderbilt 2016
3
Contents
1 Safety ....................................................................................................... 5
1.1 Target group .............................................................................................. 5
1.2 General safety precautions ....................................................................... 5
1.3 Meaning of the signal words ..................................................................... 6
1.4 Meaning of the hazard symbols ................................................................ 6
2 EU Directives ........................................................................................... 7
3 Technical data ......................................................................................... 8
3.1 Specifications ............................................................................................ 8
3.2 Mechanical dimensions ............................................................................. 9
3.3 Key to parts ............................................................................................... 9
4 Scope of delivery .................................................................................. 10
5 Installation ............................................................................................. 11
5.1 Accessing the inside of the housing enclosure ....................................... 11
5.2 Fitting the power supply modules ........................................................... 12
5.3 Cable entry into the camera housing ...................................................... 14
5.4 Fitting the camera and lens ..................................................................... 14
5.5 Mounting the camera housing assembly ................................................ 15
5.6 Connecting to the power supply .............................................................. 16
5.7 Adjusting the sunshield ........................................................................... 17
6 Maintenance and service ..................................................................... 18
7 Disposal ................................................................................................. 18
© Vanderbilt 2016
5
1 Safety
Target readers
Qualification
Activity
Condition of the
product
Installer
Technical training for
building or electrical
installations.
Installs the product,
individual components
of the product or
replacement parts.
Components of the
product are not yet
installed or need to be
replaced or modified.
1.1 Target group
The instructions in this document are designed only for the following target group.
1.2 General safety precautions
Read the general safety precautions before operating the device.
Follow all warnings and instructions marked on the device.
Keep this document for reference.
Always pass this document on together with the product.
Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
It is recommended that all possible work be carried out in a workshop prior to
final installation.
Safety
Liability claim
Do not connect the device if it is damaged or any parts are missing.
Do not make any changes or modifications to the device unless they are
expressly mentioned in this manual and have been approved by the
manufacturer.
Use only spare parts and accessories that have been approved by the
manufacturer.
Risk of failure due to incorrect installation
The fuse for the device and the fuse for the electrical system of the building must
be installed separately.
Risk of cable damage due to stress
Use only cable types that are approved for the environmental requirements.
The cable glands used must be appropriate for the cable diameter.
Safety
© Vanderbilt 2016
6
Signal word
Type of hazard
CAUTION
There is a risk of minor to medium injuries or damage to property
IMPORTANT
Malfunctioning may result
Warning of a hazard
1.3 Meaning of the signal words
The severity of a hazard is indicated by the following written warning notices.
1.4 Meaning of the hazard symbols
The nature of the hazard is indicated by icons.
Loading...