VANCO VPW-280577 User Manual

HDMI® EXTENDER

OVER SINGLE COAXIAL CABLE

PRODUCT MANUAL

Vanco Part Number

VPW-280577

www.vanco1.com • 888.769.4156

DEAR CUSTOMER

Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.

This product is 100% inspected and tested in the United States
to verify HDMI performance parameters.

WARNING

1. Do not expose this unit to water, moisture,
or excessive humidity.

2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.

3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.

4. Do not install near any source of heat,
including other units that may produce heat.

5. Do not place unit near ames.

6. Only clean unit with a dry cloth.

7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.

8. Protect the power cord from being walked
on or pinched, particularly at the plugs.

9. Use unit only with accessories specied by
the manufacturer.

10. Refer all servicing to qualied personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.

Note: For best connection and picture quality, use of Generation II BNC Compression Connectors is
strongly recommended. Do not use Type-F to BNC adaptors.

2

www.vanco1.com

FEATURES

The Vanco 280557 HDMI Coaxial Extender uses coaxial cable as the transmission media. Benets of using the
Vanco 280557 HDMI Coaxial Extender are:

1. The length of HDMI cable is normally offered in xed length increments and cannot be changed after it
is produced. This is because the HDMI connector can only be effectively soldered and terminated using
tooling, xtures and eye pattern testing equipment normally only available in a factory. However, coaxial
cables are available in most homes and in many business ofces, retail stores, schools, hospitals and
hotels. Most low voltage installers are familiar with coaxial cables and connectors and have the stripping,
crimping, and punch down tools needed for connector termination.

2. The maximum transmission distance for 1080p resolution over good quality RG-59 coaxial cable is 50
meters (164 ft) and over good quality RG-6 is 100 meters (328 ft). To achieve these distances, good
quality compression type BNC connectors must be used. Type F to BNC adapters should not be used,
since they can degrade the quality of the HDMI signal.

3. The transmitter and receiver combination has the ability of buffering and amplifying the HDMI signal.

4. The IR control system is built into the transmitter and the receiver can control the sources from the
displays, or control the displays from the sources.

HDMI® over Single Coaxial Cable Extender

Part # 280577

• Allows HDMI Audio/Video Signals to be

Transmitted Using a single Coaxial Cable

• Transmission Range: Extends 1080p Resolution

Up to 328 ft (100 m) over RG-6 Coaxial Cable
(Dual and Quad-Shielded);Extends 1080p
Resolution Up to 164 ft (50 m) over RG-59
Coaxial Cable

• Works with HDMI and HDCP Compliant Devices

• Supports High Denition Resolution 1080p

• Auto-adjustment of feedback, equalization and

amplication

888.769.4156

• LED indicators for power and signal status

• Transfers bi-directional IR control signals.

Includes an IR Receiver and IR Emitter.

• Equipped with ESD (Electro-Static Discharge)

protection

• Mounting ears are supplied

• Power Supply: (2) 5V DC

• Dimensions: 5” W x 1” H x 5” D

3

SPECIFICATIONS

Operating Temperature Range ..................................... -5 to +35°C (+23 to +95 °F)

Operating Humidity Range .......................................... 5 to 90 % RH (no condensation)

Input Video Signal ...................................................... 0.5-1.0 volts p-p

Input DDC Signal ........................................................ 5 volts p-p (TTL)

Video Format Supported ............................................. DTV/HDTV; 1080p/1080i/720p/576i/480i

Output Video ............................................................. HDMI 1.3+HDCP(repeats the source to the display

Output Audio ............................................................. Support 7.1/5.1/stereo audio (PCM only)

Maximum Transmission Distance ................................. 50 to 100 meters (164 to 328 ft)

Power Supply ............................................................ 5 VDC

Power Consumption ................................................... 5 Watts (Transmitter) 5 Watts (Receiver)

Dimensions ............................................................... 5’’ W × 1’’ H × 5’’ D

Weight ................................................................... 0.9Kg / 1.98lb (Pair)

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:

• One Transmitter Unit

• One Receiver Unit

• 1 IR TX and 1 IR RX

• (2) 5 volt, 2 amp power supplies for transmitter and receiver

• Product Manual

4

www.vanco1.com