VANCO VPW-280572 User Manual

HDMI® EXTENDER

OVER SINGLE CAT5E/CAT6 CABLE

PRODUCT MANUAL

Vanco Part Number

VPW-280572

www.vanco1.com • 888.769.4156

DEAR CUSTOMER

Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.

This product is 100% inspected and tested in the United States
to verify HDMI performance parameters.

WARNING

1. Do not expose this unit to water, moisture,
or excessive humidity.

2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.

3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.

4. Do not install near any source of heat,
including other units that may produce heat.

5. Do not place unit near ames.

6. Only clean unit with a dry cloth.

7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.

8. Protect the power cord from being walked
on or pinched, particularly at the plugs.

9. Use unit only with accessories specied by
the manufacturer.

10. Refer all servicing to qualied personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.

2

www.vanco1.com

FEATURES

Vanco Powered by Wyrestorm HDMI Extender over a single category cable (VPW-280572) is a short range
single cable extender set capable of transmitting full 1080p HD video, HD audio and one-way IR source control
together through the HDMI signal over a single Cat5e/6/7 of up to 131 ft under ideal conditions. For control
and ne tuning, the VPW-280572 offers DIP switches on both the transmitter and receiver baluns to either
encourage EDID communication between devices to ensure compatibility, or to fully adjust EQ distance range
for transmission signal optimization. The VPW-280572 also features protection against ESD (electrostatic
discharge) within each balun to further stabilize transmission with LEDs on each unit for clear power and video
signal indication.

HDMI® over Single Cat5e/Cat6 Cable Extender

Part # 280572

• Allows HDMI Audio/Video Signals to be

transmitted over a single Cat5e/6/7 Cable

• Transmission Range: Extends 1080p

resolutions up to 131 ft (40m) over Cat5e/6/7
Cables under perfect conditions

• Automatically adjusts feedback, equalization and

amplication

• Fully cascadable to create larger distributions

• EDID DIP switch on Transmitter to encourage

EDID communication between sources and
displays in the event of signal transmission
difculties

• For even greater control and ne tuning,

features a fully adjustable EQ distance range for
optimizing the transmission signal

• HDMI V1.3b supported

• Follows IEEE-568B cable termination standards

888.769.4156

• HDCP compliant

• LED indications for visual power and video

signal status

• Units contain ESD (electrostatic discharge)

protection technology to guard against static
build-up that can damage circuitry

• Transmits a wide-band one-way IR control signal

together with the HDMI signal

• 1080p HD video and HD Audio including Full

support of 3D applications - frame sequential
(Blu-ray) and Interlaced stereoscopic (satellite/
cable 3D broadcasts)

• 24bit color depth

• IR emitters and mounting brackets included

• (2) 5V DC, UL Listed Power Supplies included

• Dimensions: 2.3” W x .9” H x 4.5” D

3

SPECIFICATIONS

HDMI version ............................................................ HDMI v1.2, v1.3

HDMI resolution supported ......................................... 1080p/1080i/720p/576p/480p/576i/480i

Video color bit supported ............................................ 24bit

Audio format supported .............................................. DTS-HD Master Audio, Dolby True HD, multi-channel

5.1, 7.1, stereo

Input Video Signal ...................................................... 0.5-1.0 volts p-p

Output Video Signal .................................................... HDMI v1.3 + HDCP (mirrors the input source to the

output display)

Transmission distance ................................................ 1080p up to 131ft/40m (Under perfect transmission

conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall
outlets.)

Data transfer speed ................................................... 6.75Gbps

Operating Temperature Range ..................................... +23 to +95 °F (-5 to +35°C)

Operating Humidity Range .......................................... 5 to 90% RH (no condensation)

Power Consumption ................................................... 1.5Watts each (Max.)

Power Supply ............................................................ (2) DC 5V

Dimensions ............................................................... 2.3” W x .9” H x 4.5” D

Weight ..................................................................... 0.3lbs/.15Kg (each)

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:

• 1xVanco Powered by Wyrestorm VPW-280572 TRANSMITTER balun

• 1 xVanco Powered by Wyrestorm VPW-280572 RECEIVER balun

• 1 xProduct Manual

• 2 xpairs of balun mounting brackets

• 2 x5VDC power supplies

• 1 xIR TX Emitter (small/round) for attachment to Input device

• 1 xIR RX Receiver (larger/rectangular) for attachment to Display - IR frequency range: 940nm IR

Frequency:38KHZ

4

www.vanco1.com