Vanco SS2V, SS4V Instruction Manual

Stereo Speaker

Selector Boxes with

Volume Control

Vanco Part Number:

SS2V - Two Pair

SS4V - Four Pair

2

1. Do not expose this unit to water, moisture,
or excessive humidity.

2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.

3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.

4. Do not install near any source of heat,
including other units that may produce heat.

5. Do not place unit near ames.

6. Only clean unit with a dry cloth.

7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.

8. Protect the power cord from being walked
on or pinched, particularly at the plugs.

9. Use unit only with accessories specied by
the manufacturer.

10. Refer all servicing to qualied personnel.

WARNING

DEAR CUSTOMER

Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.

FEATURES

INTRODUCTION:

Thank you for your purchase of a VSS2/VSS4 Dual Source Speaker Selector. The VSS2/VSS4 are
low-prole speaker distribution systems which features:

• An independent On/Off switch for each zone of audio

• Impedance volume control for each audio zone

• Ability to select either of the two stereo speaker-level signals to two audio zones for the VSS2 or 4 audio

zones on VSS4

Four Pair Stereo Speaker Selector Box with
Volume Control

Part # SS4V

• Distributes high level (amplied) stereo signals
into four zones with built in impedance matching
volume control

• Features the ability to switch up to two audio
sources with independent source switch per
zone

• Each zone features an ON/OFF switch to control
each zone independently

• Removable and solderless connection terminals
for easy installation

• High quality metal chassis with brushed black
aluminum faceplate

• Accepts up to 14 gauge speaker cable

• 200 watts max power per channel

• 100 watts RMS per channel

• Dimensions: 17” W x 2.5” H x 6.5” D

Two Pair Stereo Speaker Selector Box with
Volume Control

Part # SS2V

• Distributes high level (amplied) stereo signals
into two zones with built in impedance matching
volume control

• Features the ability to switch up to two audio
sources with independent source switch per
zone

• Each zone features an ON/OFF switch to control
each zone independently

• Removable and solderless connection terminals
for easy installation

• High quality metal chassis with brushed black
aluminum faceplate

• Accepts up to 14 gauge speaker cable

• 200 watts max power per channel

• 100 watts RMS per channel

• Dimensions: 10” W x 2.5” H x 6.5” D