VANCO 280715 User Manual

HOME

THEATER

HDMI® Extenders

over UTP

Vanco Part Numbers

280723 (164ft)

280713 (100ft)

280725 (164ft wall plate)

280715 (100ft wall plate)

Technical Support

www.vanco1.com • [e-mail] • 800-626-6445

DEAR CUSTOMER

Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.

This product is 100% inspected and tested in the United States
to verify HDMI performance parameters.

WARNING

1. Do not expose this unit to water, moisture,
or excessive humidity.

2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.

3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.

4. Do not install near any source of heat,
including other units that may produce heat.

5. Do not place unit near ames.

6. Only clean unit with a dry cloth.

7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.

8. Protect the power cord from being walked
on or pinched, particularly at the plugs.

9. Use unit only with accessories specied by
the manufacturer.

10. Refer all servicing to qualied personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.

2

www.vanco1.com

FEATURES

Super IR Control

These active extenders units have the capability of transporting IR signals over the UTP cables. These
extenders can control the source from the display. This is accomplished by using an optional IR Receiver pigtail
(Part # 280721) attached to the receiver pointing away from the display and the IR Transmitter pigtail (Part #

280720) attached to the sender and pointed at the source.

*** These products are only compatible with Vanco’s Super HDMI IR Accessories.

Over-Current Over-Voltage Protection

The circuit boards are equipped with both over-current and over-voltage protection and automatically power
down if these are encountered. The power circuit will restore itself automatically once the excessive current or
voltage conditions are rectied.

HDMI® Extender over 2 UTP Cables with IR Control
(50m/164 ft)

Part # 280723

• Allows HDMI Audio/Video Signals to be
transmitted over Dual Cat5e/Cat6 Cables

• Transmission Range: Extends 1080p
resolutions up to 164 ft over Cat5e Cables;
Extends 1080p resolutions up to 180 ft over
Cat6 Cables

• High Speed Chip Set that Supports 3D, 4K x 2K

• Full HD1080P

• HDCP Compliant

• Super IR control system, IR transport channel

can be forward or backward. IR transmitters
and receivers are needed (Part #s 280720,

280721)

• Supports Digital Audio Format, DTS-HD/Dolby­True HD/LPCM7.1/AC3/DTS/DSD

• Unique Circuit Design Allows for Protection
against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD
Video brands

• Tested with 7.1 Home Theater Systems

• Shelf or Wall Mountable

• 5V DC, UL Listed Power Supply for Receiver

• Dimensions: 1.25”W x .875”H x 3.25”D

800-626-6445

3

HDMI® Extender over 2 UTP Cables with IR Control
(30m/100 ft)

Part # 280713

• Allows HDMI Audio/Video Signals to be
transmitted over Dual Cat5e/Cat6 Cables

• Transmission Range: Extends 1080p
resolutions up to 100 ft over Cat5e Cables;
Extends 1080p resolutions up to 110 ft over
Cat6 Cables

• High Speed Chip Set that Supports 3D, 4K x 2K

• Full HD1080P

• HDCP Compliant

• Super IR control system, IR transport channel

can be forward or backward. IR transmitters
and receivers are needed (Part #s 280720,

280721)

• Supports Digital Audio Format, DTS-HD/Dolby­True HD/LPCM7.1/AC3/DTS/DSD

• Unique Circuit Design Allows for Protection
against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD
Video brands

• Tested with 7.1 Home Theater Systems

• Shelf or Wall Mountable

• No power supply – Requires Source that

Provides 5V DC HDMI Signal

• Dimensions: 1.25”W x .875”H x 3.25”D

HDMI® Wall Plate Extender over 2 UTP Cables with IR
Control (50m/164 ft)

Part # 280725

• Allows HDMI Audio/Video Signals to be
transmitted over Dual Cat5e/Cat6 Cables

• Transmission Range: Extends 1080p
resolutions up to 164 ft over Cat5e Cables;
Extends 1080p resolutions up to 180 ft over
Cat6 Cables

• High Speed Chip Set that Supports 3D, 4K x 2K

• Full HD1080P

• HDCP Compliant

• Super IR control system, IR transport channel

can be forward or backward. IR transmitters
and receivers are needed (Part #s 280720,

280721)

• Supports Digital Audio Format, DTS-HD/Dolby­True HD/LPCM7.1/AC3/DTS/DSD

• Unique Circuit Design Allows for Protection
against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD
Video brands

• Tested with 7.1 Home Theater Systems

• 5V DC, UL Listed Power Supply for Receiver

• Dimensions: 2.75”W x 4.5”H x 1.25”D

• Fits single-gang box

4

www.vanco1.com